34f3869cdc
Change int->bus_addr_t in com_kgdb_attach() prototype.
...
Compiles again with KGDB enabled.
2000-10-06 21:12:01 +00:00
f6bf6762ab
Ops, disable debugging messages.
2000-10-06 20:07:10 +00:00
c8ad9b6302
Regen
2000-10-06 16:39:22 +00:00
171adcf634
Fix recurent typo: shed->sched
2000-10-06 16:39:04 +00:00
e353a6d9b2
Adapt for reselect handling from the script. While here, fix typo
...
(SIOP_SCXFER -> SIOP_SXFER).
2000-10-06 16:35:13 +00:00
eae96f0267
Regen
2000-10-06 16:31:31 +00:00
c67eef4e7d
Handle reselect entirely in script; for this provide a script area,
...
modified by the driver, which will load the appropriate DSA for a given
target/lun.
2000-10-06 16:31:17 +00:00
5df1120c67
Add some more completion status codes.
2000-10-05 11:23:05 +00:00
2e6cb6a878
When 802.1Q MTU, we have to ignore the Frame Too Long errors, and there's no
...
need to disable RWT and JAB.
2000-10-05 07:22:43 +00:00
7ce859b8d0
Allow 16-bit only speakers to work.
2000-10-05 01:35:07 +00:00
cc135eb39f
Add MI mk48txx.
2000-10-04 18:44:24 +00:00
d11ef545cd
Enable sanity checks in mk48txx_gettime().
...
(Many news68k have dead NVRAM.)
2000-10-04 17:00:45 +00:00
a2c02690af
only VT82C586A rev >= 6 supports Ultra-DMA. From OpenBSD.
2000-10-04 09:34:09 +00:00
5d4d9ec965
Update with uscanner.c
2000-10-04 02:45:07 +00:00
c068cf3953
Regen.
2000-10-04 02:09:37 +00:00
9d09a17e7c
Add more vendors.
2000-10-04 02:09:07 +00:00
5fcde4924f
Support ETHERCAP_VLAN_MTU by igorning Receive Watchdog and Transmit Jabber
...
errors if VLANs are configured on the interface.
2000-10-03 23:35:55 +00:00
cbfe7605c9
Support ETHERCAP_VLAN_MTU by doing extra error checking upon packet
...
reception and saving other "bad frames" (i.e. ones that are larger
than the standard Ethernet frame length) if we have VLANs configured
on the interface.
2000-10-03 23:35:02 +00:00
5d4fa9b0ce
Revert rev 1.31 of bha.c (and associtated changes in the headers and
...
config glue files).
Fixes PR kern/9841. Tested by Tracy J. Di Marco White with a bt948
and 6 disks.
2000-10-03 14:07:36 +00:00
91959d389e
Typo in comment.
2000-10-03 13:54:02 +00:00
33e8ebeef3
1970 -> POSIX_BASE_YEAR
2000-10-03 13:52:39 +00:00
df9baa1d7a
Move #define POSIX_BASE_YEAR to clock_subr.h.
2000-10-03 13:41:07 +00:00
5c0aabad0d
For SECDAY, use "24 * 60 * 60" rather than "86400".
2000-10-03 13:00:30 +00:00
623aae812b
Only probe for drive 0. Fix es problem reported by Nathan Williams
...
<nathanw@MIT.EDU>.
2000-10-03 04:33:03 +00:00
7edd5d54bc
Add support for the ADMtek AN983 and AN985.
2000-10-03 04:32:00 +00:00
4462a44b87
Regen: ADMtek AN985
2000-10-03 02:59:05 +00:00
618e7b93c6
Add ADMtek AN985 10/100 Ethernet.
2000-10-03 02:58:30 +00:00
10da4aa927
Add MI md_root.c, per discussion on tech-kern.
2000-10-02 15:22:32 +00:00
903ae58e7b
I2O subclasses currently have nothing to do with the protocol version.
2000-10-02 14:48:13 +00:00
1af3d80bce
fix compilation without INET.
2000-10-02 03:53:07 +00:00
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
3e401aa14d
upl(4) is a IPv4 only device.
2000-10-01 11:35:28 +00:00
dcfcbaf8ae
- Add ioctl commands to wsdisplay which set/get some LCD status,
...
backlight, brightness and contrast.
- Add 9 command key symbols which make wskbd to call wsdisplay's
iocontrol.
- Add special key map variant KB_MACHDEP. This variant does not
have any real keymap but it's just a placeholder for machine dependent
maps which will be overwrite by machine dependent keyboard driver.
2000-10-01 03:29:12 +00:00
9a37177d17
fix 16BPP support (for next68k), from Timm Wetzel.
2000-09-29 06:29:47 +00:00
710c43c745
6 -> ETHER_ADDR_LEN
2000-09-28 10:56:57 +00:00
f4ef578da7
6 -> ETHER_ADDR_LEN
2000-09-28 10:29:42 +00:00
ab9b015dce
6 -> ETHER_ADDR_LEN
2000-09-28 10:10:14 +00:00
b4b2cdf575
Replace misused DIAGNOSTIC with WI_DEBUG.
2000-09-28 06:29:41 +00:00
2f625bf43f
Remove unnecessary and commented out code.
2000-09-28 06:24:48 +00:00
af7ddd3659
Set up the physical addresses for DMAPTR/NEXTPTR before adjusting for
...
unaligned transfers and adjust the physical address to align the transfer.
If the buffer end just crossed the page boundary, the computation of the
NEXTPTR physical address resulted in using -1. The cleanup at the end of
the DMA transfer would try to copy the residual data to physical address
0x1ffffffc. This would silently corrupt data on the R3000 and usually
would hang the R4000.
2000-09-28 03:11:29 +00:00
64d672931e
Regen.
2000-09-28 01:27:16 +00:00
6f2ac8aed1
Add a couple of Apple products.
2000-09-28 01:26:49 +00:00
4a8619ae15
Match the i82562.
2000-09-27 10:54:55 +00:00
64f1d1a42f
Add missing cast of ms to (struct device *) in ms_deviopen and ms_deviclose
2000-09-27 10:31:42 +00:00
815d8f961b
Regen.
2000-09-27 02:15:30 +00:00
c3fa0043b1
Add some ATI Rage cards and some Intel chips.
2000-09-27 02:14:54 +00:00
91178eae70
Add missing '&& defined(COM_MPLOCK)'
2000-09-26 14:12:42 +00:00
44c90f4ef1
Pasto; shouldn't have bitten anyone.
2000-09-26 11:38:47 +00:00
d52ba1b85f
Fix merge lossage in disabled code.
2000-09-25 01:07:25 +00:00
5eb24d5dd0
am7990[0]_intr(): only print the "entering with isr=XX" debug message
...
if compiled with LEDEBUG > 1
2000-09-24 18:37:22 +00:00
nathanw