29d472f53d
Garbage-collect the open_target_lu and close_target_lu entry points from
...
struct scsipi_adapter; they were not used.
Add a scsipi_ioctl entry point to struct scsipi_adapter. This will be
used to issue ioctl commands to the host adapters.
Inspired by PR #6090 , from Matt Jacob.
1998-10-10 00:28:28 +00:00
5422d07da0
Construct a `flush_cache_all()' for Cypress CPUs.
1998-10-09 10:48:14 +00:00
024e5f4c9a
More `#if defined(MULTIPROCESSOR)'s.
1998-10-09 10:08:52 +00:00
57a688f81e
Init a variable.
1998-10-09 08:01:33 +00:00
832a061bca
Fix some old mistakes when I originally committed this.
1998-10-09 06:20:06 +00:00
c4ece7cdcb
Commit out include of "../include/macros.h" since its bcopy conflict with
...
the one in "lib/libsa/stand.h".
1998-10-09 06:15:33 +00:00
71364ebea6
Workaround problem with le driver forgetting its address
1998-10-09 06:14:22 +00:00
3d8c929799
Remove define for SUPPORT_BOOTPARAMS and put in the Makefile instead.
...
Fix DHCP code so it works.
1998-10-09 06:13:30 +00:00
7d79b82d33
include <bsd.prog.mk> and make changes so that "make obj" works.
...
Make it easy to build an boot which uses BOOTP/DHCP instead
RARP/BOOTPARAMS.
1998-10-09 06:12:31 +00:00
bbf29cff44
Add strncpy (needed for bootp/dhcp). Tighten up some of the assembly.
1998-10-09 06:09:48 +00:00
45a8df778f
Remove some unnecessary includes.
1998-10-09 00:17:20 +00:00
312385da0a
Define SMP versions of some cache flush methods.
1998-10-08 22:27:32 +00:00
41d031837e
Define a message structure of inter-processor communication.
1998-10-08 22:25:42 +00:00
f3c4a67a7f
Adapt to changes to the cpus[] array.
1998-10-08 22:23:44 +00:00
34ad8e5fb7
Find out about the number of CPUs in the system before starting device
...
configuration, so we can build a cpus[] array without "holes".
1998-10-08 22:14:44 +00:00
a61ee50b27
Move [gs]etcontext and [gs]etpte() to pte.h
1998-10-08 21:49:12 +00:00
e6bbfcc58a
Move [gs]etcontext() and [gs]etpte() to pte.h
1998-10-08 21:47:34 +00:00
6662b5ed74
- define framework for >8bit transfers
...
- implement 16 bit contiguous and 16 bit interleaved, both big-endian
1998-10-08 21:46:39 +00:00
67b94a13ed
Add the Intel 82443BX PCI host bus adapter. From Soren S. Jorvang, PR #6250 .
1998-10-08 20:04:32 +00:00
3e28defef4
No point in making the fake partition that large.
...
This smaller one will (hopefully) make 0-start
installations work on more machines.
1998-10-08 14:25:42 +00:00
b6fd7187e0
Fix more syscall32 and signal breakage.
1998-10-08 02:31:39 +00:00
8d41878215
Add pckbc device, keyboard and mouse and wskbd and wsmouse via pckbc.
1998-10-08 01:59:22 +00:00
d21eb4802d
Rename the pckbd attribute to avoid clashing with the pckbd device
...
from dev/pckbc/*
Include files.pckbc
1998-10-08 01:50:28 +00:00
010b1e5215
Erg, frame -> trapframe in last. (thanks to john kohl)
1998-10-07 21:25:35 +00:00
b6553585ab
g/c leftover `{' in #if notdef; it confuses ctags(1)
1998-10-07 19:09:53 +00:00
b38544d99e
Oops, back out a buglet I didn't intend to commit in the last change.
1998-10-07 18:29:26 +00:00
4b23112e21
Add empty definition of __warn_references for lint.
1998-10-07 08:54:59 +00:00
d833f66c0c
Copyright stuff.
1998-10-07 07:22:32 +00:00
d976f73513
Enable interrupt AFTER autoconfiguration.
1998-10-07 06:24:58 +00:00
8c9bf4e881
Use the size field to distinguish between ADDX and ADDA. Fixes a problem
...
pointed out by Paul Goyette.
1998-10-07 06:08:47 +00:00
651280426e
Fix a problem pointed out by Paul Goyette: print_reglist() forgets that
...
it had a range of registers to print if A7 is among them.
1998-10-07 05:27:13 +00:00
31314a2d26
Mask clock interrupt properly if >= splclock.
1998-10-07 04:58:23 +00:00
8362affa14
Add a few "nop" instructions to make the memory size probe more reliable.
1998-10-06 22:26:42 +00:00
d374462dfc
Move the code that does the deferred (post-autoconfiguration) buffer
...
cache allocation to its own function, and call it at the end of configure().
1998-10-06 21:42:08 +00:00
abaeca8063
Move the calls to hwrpb_restart_setup() and cpu_run_spinup_queue() to the
...
end of configure().
1998-10-06 21:19:05 +00:00
2038eb830c
Split hwrpb_restart_setup(), putting the code that initializes the vtpb
...
and primary hwpcb into hwrpb_primary_init(). Call the latter before
performing autoconfiguration().
1998-10-06 21:10:46 +00:00
5a687aeb55
cold is already set to false at the end of configure().
1998-10-06 20:55:38 +00:00
d681cf055a
configure() prototype is in <sys/device.h>
1998-10-06 20:50:15 +00:00
fedd39b57d
Provide configure(), rather than open-coding it in cpu_startup().
1998-10-06 20:46:01 +00:00
2727683a09
more DIAGNOSTIC sanity checks
1998-10-06 19:24:03 +00:00
0729240c88
Move the "XXX re-zero proc0 user area" to the end of configure(), before
...
interrupts are enabled.
1998-10-06 18:58:09 +00:00
3e8b7d3139
Only return COMPLETE when polling.
1998-10-06 09:32:44 +00:00
05ebc10205
Disable SCSI interrupts while polling for the transfer to finish. This
...
fixes spurious panics while booting my Hades. This bug could also occur
on a TT030.
1998-10-06 09:29:44 +00:00
8a20859c2e
Some DEBUG fixups
1998-10-06 09:22:01 +00:00
e3704a8e0b
Fix DEBUG printf
1998-10-06 09:19:36 +00:00
e7340f0ed3
Fix a potential Y2K bug on some clock chips: we were loading invalid
...
BCD into the year field of the RTC in years > 1999. It seems to have
worked just fine on my old broken down test machine, but apparently
some others actually get hurt. Suckage. We now make sure that we load
valid BCD.
Other ports should check for variations on this theme.
1998-10-06 05:52:23 +00:00
cd0dd24713
It seems taht 64-bit kernels need bigger stacks.
1998-10-06 05:18:55 +00:00
d0d18d5a83
Fix PIC code initialization.
1998-10-06 05:16:34 +00:00
75f5ffdf21
Change backplace0 to mainbus0 (for consistency with other ports).
...
Remove unused function protocols from ka410.h and ka43.h
Fix some ka46 missing references
1998-10-06 04:04:30 +00:00
72e565d9b1
Fix unassigned minaddr for uvm_km_suballoc.
...
Eliminate space at end of line, and so on.
1998-10-06 03:48:12 +00:00
thorpej