MI dp8390 and ne2000 drivers from dev/ic could / should be used but this
version has a few changes and has been well tested and thus should be
used for 1.3.
Hopefully this driver will be short lived.
- Removed mainbus specific code and moved the basic drivers from
arm32/mainbus to arm32/dev. Added code so that these drivers
will support multiple attachments from different ARM busses.
- Implement new time-of-day device. This device provides the
inittodr() and resettodr() functions and is designed to be a child
device of an RTC device. This allows one of multiple RTC's attached
to be used to provide the basic time of day functions.
- New home for lpt driver, (moved from arm32/mainbus) without the
mainbus specific attachments. (Revision history preserved).
- Hopefully this will be short lived with the new dev/ic/ lpt driver.
(currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2
busses to which devices can attach (scsibus and atapibus). This needed to
change some include files and structure names in the low level scsi drivers.
the locators.
In wdcprobe_internal() set the WDCF_32BIT flag if the data32 io handle
is set.
All transfers to and from the data register now check for softc flags
to see if 32 bit transfers are enabled i.e. reading drive parameters
and doing a dump will use 32 bit transfers as well.
In the probe routines check the mainbus attach args mb_iobase field
to verify that the iobase did not default as an iobase address needs
to be specifically specified.
space handles to describe the task file registers, aux register, 16 bit
data register and 32 bit data register.
The wdc softc structure has been moved to a separate file.
Added support for multiple attachments by separating the core of the
probe and attach functions from the mainbus probe and attach routines.
Added a new wdc flags 32_BIT so that the wd can determine 32 bit xfer
support from the wdc device.
as the only argument and cast this as appropriate now that the function
pointers to the interrupt registration functions are fully prototyped.
Use <machine/conf.h> for the declarations of the device driver entry
points.
Impelemented a fix for kernel locks when opening the serial post :
Revisions A->D of the SMC FDC37GT665 Peripherial controller have
a bug in the serial port that is triggered if the FIFO is enabled
while there is a byte in the rx data register resulting in the
rx ready bit being permenantly set.
mark