3e4a358e28
Patch from Thomas Eberhardt to make PCnet-32 chips work.
1994-12-12 04:39:52 +00:00
303841c92e
3c509 fixes to avoid adapter getting stuck in high traffic conditions.
...
I don't particularly like the fixes, but at least now the 3c509 never
gets stuck. On the other hand, performance still sucks in some cases.
1994-12-10 14:52:02 +00:00
793e542f89
Fix format of attach message.
1994-12-10 05:55:26 +00:00
50c5dd6f0d
fix problem with disconnects (Ralph Campbell)
1994-12-05 19:11:12 +00:00
ba0ac0e803
added missing #ifdef DEBUG
1994-12-01 16:41:05 +00:00
1b372b7e96
Remove some redundant code.
1994-12-01 13:07:28 +00:00
0109779d43
Remove unneeded override of SCSI_NOSLEEP.
1994-12-01 12:45:25 +00:00
c1cbd9c635
Set UIO residual count.
1994-12-01 12:36:35 +00:00
71ab8bb627
Always set the device number correctly, even though we don't need it.
1994-12-01 12:26:37 +00:00
d18cbacd88
Redux.
1994-12-01 12:12:08 +00:00
1066219897
Uncomment call to scsi_user_done(), and remove a duplicate biodone() (and
...
another si_free()).
1994-12-01 12:04:43 +00:00
a10cbd7179
Remove the silly statically allocated array, and simply malloc the data
...
structures as needed. Also, put the buf in the malloc()ed area. Remove a
duplicate si_free() (though this was harmless before).
1994-12-01 11:53:56 +00:00
211b002017
Ignore ERR during diagnostics.
1994-12-01 10:45:26 +00:00
867ebf1d84
Clear the controller active flag after a timeout.
1994-11-30 02:32:03 +00:00
5584ff927f
Don't stall the queue on CHECK SENSE if we get a reselect while selecting.
1994-11-30 02:08:01 +00:00
639a64de08
Fix a null pointer reference.
1994-11-29 21:35:13 +00:00
51bed8d804
Add an assertion mechanism to check for more abnormal conditions.
1994-11-29 21:29:56 +00:00
58cb5339d6
For consistency...
1994-11-29 20:57:28 +00:00
41b26a6dfd
Handle BUS FREE phase a little differently, to get better error detection. Other
...
cleanup.
1994-11-29 20:08:27 +00:00
bb90feebac
Disable debugging breakpoints by default.
1994-11-29 17:56:49 +00:00
5ac2484d95
* Redo most of the message and phase state machines. Multiple pending
...
message outs should now work correctly (including retransmissions).
Multiple messages ins should be more efficient. Missing REQ after
reselection phase should now (correctly) cause a wait with ENREQINIT
set.
* Abstract out the reselection out sequence, and use it directly to
get sense info. (This is somewhat faster than the generic done/sched
sequence.)
* If there are no ACBs available, wait interruptibly for one.
* Leave the interrupt registers alone during message in/out; just
watch for phase change. Don't (incorrectly) reenable interrupts
during data in/out; defer that to aicintr().
* Handle command pointer per SCSI 2 spec.
* Other minor coding improvements.
1994-11-29 17:50:39 +00:00
fcf0991366
new asc.c from Ralph Campbell
1994-11-28 19:05:54 +00:00
6a2c060851
fix unary plus typo :-)
1994-11-25 23:19:03 +00:00
299c14af0c
New handling of pte:s for physio.
1994-11-25 19:09:31 +00:00
cba32aa25f
Minor update for new autoconfig.
1994-11-25 08:17:21 +00:00
0649f37219
Officially credit Onno.
1994-11-23 22:00:08 +00:00
2058abab15
Forgot to commit this as part of the LBA changes.
1994-11-23 07:56:52 +00:00
cc44b4600c
There's no point in bothering to unlock what we didn't lock.
1994-11-23 07:54:15 +00:00
6dda55519e
Fix an outdated comment.
1994-11-23 03:11:01 +00:00
a3fc466734
Use logical block addressing if available. Be a little more careful about
...
maintaining timeouts. Clean up wddump() a bit.
1994-11-23 01:35:43 +00:00
525fc36e19
Implement 32-bit reads and writes, but for now assume 16-bit mode.
1994-11-22 10:20:16 +00:00
3a99ddf172
Add a missing newline in some error messages.
1994-11-22 09:36:56 +00:00
db3bde9525
Implement EIDE multi-sector PIO and DMA modes, based on code from Onno van
...
der Linden. Also, various structural cleanup, and fix two bogons that crept
in, and remove all of the old clustering nonsense.
1994-11-22 09:33:59 +00:00
1e01855683
Minor fix to debugging code.
1994-11-22 05:50:48 +00:00
85826f0fbe
Fudge a couple more fields for ancient disks.
1994-11-22 05:39:16 +00:00
e1a7bac628
Change some constant names, etc., to better match the ATA spec.
1994-11-22 05:34:49 +00:00
95edd299b0
Add still more locking.
1994-11-22 03:23:49 +00:00
284d17e8f0
Complete last change.
1994-11-22 00:14:24 +00:00
0c36dd6762
C botch repair from bostic
1994-11-22 00:05:36 +00:00
c81c637ee3
Return EIO when the drive is empty.
1994-11-21 11:37:26 +00:00
7a1dcbfac6
Clean up open and close routines somewhat.
1994-11-21 11:28:47 +00:00
fd32202948
Replace dev_unit with device_softc in scsi_link. Change argument to foostart()
...
to void*.
1994-11-21 10:39:09 +00:00
5bd4115690
Add some missing locking, and some general cleanup.
1994-11-20 22:36:43 +00:00
9a3840f2f0
Stylistic changes.
1994-11-18 22:25:12 +00:00
61800cfa25
Convert port, IRQ, and DRQ numbers to ints.
1994-11-18 22:07:32 +00:00
35cdd801e6
Convert port, IRQ, and DRQ numbers to ints.
1994-11-18 21:57:40 +00:00
38483bbbf0
Enough Chinese torture already
1994-11-15 23:00:23 +00:00
393ee3693c
Surrounded call to debug routine with #ifdef DEBUG
1994-11-15 18:59:40 +00:00
a2727ec558
Check IRQ 9, not IRQ 2.
1994-11-15 00:00:24 +00:00
b341f7a8c0
Map IRQ 2 to IRQ 9.
1994-11-14 23:58:56 +00:00
c2c3dce760
added extra argument to vn_open
1994-11-14 06:00:10 +00:00
21e911d911
Update for new autoconfig.
1994-11-07 09:03:48 +00:00
2a9b6f7959
Fix stupid bug in last change.
1994-11-04 23:30:15 +00:00
4ec6774e12
Add a simplified version of wdcommand() that can be used in some cases.
...
Avoid needing a wd_softc inside wdprobe().
1994-11-04 23:18:06 +00:00
3df6bf0c0e
Trivial stylistic changes.
1994-11-04 21:32:23 +00:00
854d8d96dc
Rearrange slightly.
1994-11-04 19:25:34 +00:00
cfc4633919
Remove outdated comment.
1994-11-04 19:17:47 +00:00
b7acf321cd
No longer needs icu.h.
1994-11-04 18:59:34 +00:00
195574a7de
Change all of the uses of IRQ{0-15} and bit masks to use plain numbers
...
rather than bit shifting.
1994-11-04 18:57:15 +00:00
29414c5a0a
Change all of the uses of IRQ{0-15} and bit masks to use plain numbers
...
rather than bit shifting.
1994-11-04 18:34:50 +00:00
f8183b2d0e
Make a wrapper match function to check the bus and device numbers, rather
...
than insisting that every driver do it.
1994-11-04 09:42:18 +00:00
9af4fee97d
Use kvtop() rather than address arithmetic in a couple of places.
1994-11-04 08:55:53 +00:00
1948fcb3fa
Add a new function config_scan(), which just calls a particular function
...
with each plausibly cfdata, ignoring the priority mechanism completely.
1994-11-04 06:40:11 +00:00
2e8ae560f6
Commit incest with the config system for this one specific case.
1994-11-04 03:57:32 +00:00
fa769b0e97
Set ia_irq correctly.
1994-11-04 02:55:32 +00:00
7773b21b74
Correct an oversight.
1994-11-04 00:53:06 +00:00
d4dd538296
Oops; forgot isacd.
1994-11-04 00:07:39 +00:00
3fca7e771a
New version using standard config_*() functions.
1994-11-03 23:53:19 +00:00
ebbdd6473b
Update to match autoconfig code.
1994-11-03 23:26:03 +00:00
19fc9d55c8
*intr() arg does not need to be void*.
1994-11-03 23:23:38 +00:00
d0163400d1
Update to match autoconfig code.
1994-11-03 23:21:24 +00:00
54cc63645d
Update to match autoconfig code.
1994-11-03 23:08:27 +00:00
d23d1e83dc
Use indirect config for subdevices, and add dkdrivers where missing.
1994-11-03 22:55:58 +00:00
94cde915db
Rename pciprobe() to pcimatch(), and move it to pci_machdep.c.
1994-11-03 22:27:16 +00:00
e06bd72a85
Always use direct configuration.
1994-11-03 22:15:19 +00:00
d8561ad477
Oops; update scsibusmatch() arg list.
1994-11-03 22:09:00 +00:00
ef0c18e1cf
Always use direct configuration for SCSI devices.
1994-11-03 22:05:08 +00:00
54608f7ea0
Remove a couple of i386-specific hacks, and make a couple of others #ifdef
...
CONFIG_INDIRECT instead.
1994-11-03 20:24:21 +00:00
283745574f
Commit this, though it really does need work.
1994-11-03 16:55:57 +00:00
1c76bf7aa1
Add a nullcnpollc(), for people who don't want to deal.
1994-10-30 22:16:37 +00:00
6ac2bbfc35
be more careful with types, also pull in headers where necessary.
1994-10-30 21:43:03 +00:00
9769a6a6f7
Various:
...
* Forget all cached info when opening a new disc.
* If the disc is removed, flush the buffer queue rather than stalling it.
* Set the default label after getting the disc size, and fill in the info
for RAW_PART also.
* Change another use of the unit number to a softc pointer.
* Use a dkdevice to hold the label and open partition masks.
* Force the partition offset to 0 for RAW_PART, regardless of the label.
* Nuke MCDPHYS() and MCDREADRAW; they had a silly bug that caused the code
to not work, and they aren't useful anyway.
Some other minor cleanup.
1994-10-28 23:39:59 +00:00
022ee8f7fe
new RCS ID format.
1994-10-27 04:14:23 +00:00
5a13863a4b
Default to decent performance.
1994-10-27 02:04:18 +00:00
fc67924047
Merge changes from Wolfgang Stanglmeier's 941012 release.
1994-10-27 02:02:00 +00:00
a63beafc2b
new RCS ID format.
1994-10-26 21:08:38 +00:00
556a119342
Implement *cnpollc().
1994-10-26 18:06:30 +00:00
511d2732a3
Implement cnpollc().
1994-10-26 17:56:53 +00:00
d62187c043
new RCS ID format.
1994-10-26 08:01:33 +00:00
260ddbefb7
Rearrange ed_init() slightly, to better correspond to the National manual.
...
Optimize ed_rint() slightly in the case of multiple packets. (Avoid an outb
and an inb for each packet).
1994-10-23 23:24:56 +00:00
603fe7b5a6
Slight optimization.
1994-10-23 21:38:00 +00:00
0114159848
Fix the packet length correction for buggy chips so that it actually works,
...
and always use it (otherwise short packets could still be corrupted). Also
produce a diagnostic message if DIAGNOSTIC, since it *is* a hardware bug.
Add an ED_PAGE_SHIFT constant, and use it, to avoid GCC doing horrendous
things with divides and multiplies.
1994-10-23 21:22:13 +00:00
28cbceeec7
Make this more likely to work.
1994-10-23 19:24:01 +00:00
e5d974c51f
First cut at making user-level SCSI commands work. This is untested.
...
Partly from John Brezak.
1994-10-20 20:31:23 +00:00
3e30a415ae
Be careful not to stack multiple timeouts.
1994-10-20 19:22:01 +00:00
4d072c5435
Remove the local timeout mechanism, and just use explicit timeout()/untimeout()
...
calls.
1994-10-20 18:37:45 +00:00
c11a06cbc2
Always set d_secsize to 512 for now.
1994-10-20 17:03:09 +00:00
b8ab5f65d1
Back out change to print geometry from label at boot; can't do this reliably.
1994-10-20 16:54:44 +00:00
0862d07daf
Don't switch to single-sector mode just because we got a corrected error.
1994-10-20 16:36:21 +00:00
d4153fff4d
Rearrange wdcstart() in a more logical fashion, and eliminate many redundant
...
calculations. Also, speed up bad block searching a little.
1994-10-20 16:19:08 +00:00
7d391c250d
Fix minor omission.
1994-10-20 14:10:18 +00:00
cd66683989
openpart -> openmask
1994-10-20 14:08:07 +00:00
bb12b9c8a2
Trivial stylistic changes.
1994-10-20 14:05:08 +00:00
caaeda044b
Similar changes to sd.c.
1994-10-20 14:03:38 +00:00
b1568d887e
Use the block size in the label in most cases.
1994-10-20 13:50:38 +00:00
cae71ba91d
Various changes:
...
* Add a dkdevice; move sc_*openpart, sc_label, and sc_cpulabel into it.
* Turn sc_wlabel into a flag, and don't set it automatically in DIOCWLABEL.
* If there is no label, disallow all I/O except to the raw partition.
* Don't allow I/O to `unused' partitions.
* Beginnings of support for block sizes other than 512 bytes.
Other minor changes.
1994-10-20 13:44:46 +00:00
d5b3572f5c
Various changes:
...
* Get rid of unused `partflags'.
* Use dk_openpart, and remove `openparts'. Also, allow an open on both
the block and characters devices at the same time.
* If there was a label, print the geometry from the label at boot time.
* Turn `wlabel' into a flag, and *don't* set it automatically in
DIOCWLABEL; disklabel(8) does that.
Other minor changes.
1994-10-20 13:33:36 +00:00
8ae8b4ab29
Bug fixes from Rafal Boni:
...
* Set promiscuous mode flag before configuring card, so it actually works.
* Handle failed TDR commands correctly.
* Remove some apparently defunct and bogus code.
(This driver needs more work.)
1994-10-18 13:40:30 +00:00
320359f8e2
change, requested by Jarle Greipsland
1994-10-17 00:08:29 +00:00
49c34d3337
move arch dependence to archs. clean up a bit. deal with weird MAXPARTITONS.
1994-10-14 18:26:22 +00:00
6f5794ecba
Fix bugs in dealing with odd-length mbufs in ed_pio_write_mbufs(). From
...
John Hood.
1994-10-14 13:05:13 +00:00
7c01f7ce51
Changes from DG to deal with some old chips that corrupt the packet length.
1994-10-12 13:42:00 +00:00
4252ca6644
Correct multicast filter calculation.
1994-10-09 21:19:04 +00:00
236f105ccd
Remove unneeded #includes.
1994-10-09 15:06:23 +00:00
5a58654e8a
Fixed bugs according to old memory system.
1994-10-08 15:46:15 +00:00
b90985ee3d
Don't poll the BUSY bit until the SDH register is set.
1994-10-07 11:34:52 +00:00
1eaa03e7dc
Fix initial allocation of dev array, and simplify the code
...
slightly.
1994-10-07 09:08:29 +00:00
86e7908a72
Make some comments more clear.
1994-10-01 07:19:32 +00:00
f7b0f89811
Various minor changes to sync better with DG's version.
1994-10-01 07:13:32 +00:00
6ddbe860c2
Update from Wolfgang Stanglemeier.
1994-10-01 06:27:56 +00:00
0e28696023
Add IO_PPI.
1994-10-01 03:52:46 +00:00
e32c213d35
Add IO_PMP[12] and IO_PMPSIZE.
1994-10-01 03:48:49 +00:00
b7cc64e049
Check the SB Pro IRQ and DRQ correctly. From Jason Thorpe.
1994-09-16 23:48:22 +00:00
c7003d37d3
Only reset FIFO if changing baud rate. From John Kohl (slightly edited).
1994-09-16 02:50:39 +00:00
8dd2c63b08
Turn off the delay debugging messages again.
1994-09-12 20:29:08 +00:00
584de55692
Missed an iobase that should be u_short.
1994-09-05 00:21:40 +00:00
5aa2f1e6bb
remove an un-aligned access
1994-08-30 17:01:57 +00:00
a13c1b15cc
Minor.
1994-08-26 12:43:17 +00:00
de20d2cf67
Re-enable EISA reset code -- definately needed now. do RX_DISCARD_TOP_PACK
...
before leaving splhigh(), to give incoming packets a better chance.
1994-08-26 12:11:44 +00:00
6c2b49032b
fix debugging stuff, from dean
1994-08-25 20:18:25 +00:00
f32f66a23b
fix (bogus) default ioctl return.
1994-08-24 16:49:16 +00:00
5e4a51278b
Set the FIFO threshold based on the receive speed, per Mark Weaver.
1994-08-24 07:25:18 +00:00
c4eac0f370
Some cleanup, checked by Dean.
1994-08-23 23:40:55 +00:00
8ac5e10c5d
Various code cleanup.
1994-08-23 19:30:12 +00:00
666f228bab
add `eg' driver for the 3c505 by <dean@fsa.ca>
1994-08-23 17:59:33 +00:00
996b2b5c54
Disable EISA reset, for now.
1994-08-22 21:53:23 +00:00
71c5da7bfb
Fix typo in WDCS_BITS.
1994-08-22 21:43:35 +00:00
8b8390a4bb
Look for MDMBUF in cflag, not lflag.
1994-08-21 15:04:37 +00:00
256353ef62
multicast
1994-08-17 06:04:49 +00:00
5f27568164
Eliminate struct pte and struct pde.
1994-08-15 14:46:45 +00:00
36975ff354
Don't use altsts. Sigh.
1994-08-15 08:22:20 +00:00
a618f9d915
Slight optimization, and don't go bonkers if one of the sub-devices is not
...
configured.
1994-08-14 14:13:25 +00:00
a570fcd929
Re-enable EISA reset.
1994-08-14 09:43:59 +00:00
cd2f7cc8a0
Clean up a little.
1994-08-14 09:24:55 +00:00
06476a4e53
ccdevsw --> cdevsw
1994-08-14 07:41:08 +00:00
692c724215
un-aligned access is not cool on some processors
1994-08-12 08:57:18 +00:00
da79c879cd
On probe or open, retry the READ CAPACITY once if the drive reports NOT READY.
1994-08-11 23:51:26 +00:00
3c3258eb6d
Make this work.
1994-08-11 04:54:13 +00:00
55b11feb0a
Update some comments.
1994-08-10 04:37:52 +00:00
8dbfcf9e2e
Add NCR 53c8XX driver, originally from Wolfgang Stanglmeier.
1994-08-09 22:20:44 +00:00
3e685aec5c
Change ST_Q_NEEDS_PAGE_0 to something more generic.
1994-08-09 18:50:17 +00:00
6df721be97
Add PCI autoconfiguration support.
1994-08-09 00:47:46 +00:00
061c42c22d
Minor update.
1994-08-08 07:09:31 +00:00
59de58a39b
Count up the silo overflows and only log a warning at most once per minute.
1994-08-07 11:27:51 +00:00
9c8afcf191
Avoid using DFIFOHF, which doesn't exist on 6260 chips. Turn off
...
AIC_USE_DWORDS by default.
1994-08-07 10:51:40 +00:00
b0db502d9c
Remove diagnostic.
1994-08-07 10:49:06 +00:00
d9a996a92e
Add multiplexer for RT 4-port serial cards.
1994-08-07 10:45:53 +00:00
b6e9bf14c8
Simplify the DEPCA memory test, and fix a problem with using the alternate
...
PROM address.
1994-08-07 00:56:04 +00:00
ebd23fe5e0
cleanup
1994-08-06 23:19:39 +00:00
558c00c001
Fix spelling of `STEREO'.
1994-08-05 22:56:19 +00:00
cefefb25ca
cleanup, working 32 bit IO on the 3c579, and memory alignment of insl/insw
...
for better performance.
1994-08-05 21:16:33 +00:00
b5c5c47f92
Obey the command queue size for the controller.
1994-08-04 09:52:47 +00:00
9d7eefb176
Change iosize to 16.
1994-08-03 09:17:12 +00:00
a17171c0a2
Add a missing splx() and increase the reset delay during probe, as suggested
...
by Juergen Keil. Add a diagnostic message if the controller info is not what
we expect.
1994-08-03 08:57:59 +00:00
8026fb53f2
Initial VAX port merging.
1994-08-02 20:18:46 +00:00
45b0217c1e
Fix up u14_find() a bit; mainly, don't include a DRQ for the 34f.
1994-07-31 19:21:40 +00:00
a00c5fdb91
Add some missing newlines in the attach messages.
1994-07-31 18:25:50 +00:00
8a9df6389d
Bug fixes from Mark Weaver.
1994-07-31 11:34:38 +00:00
53f3b61cdc
Redux.
1994-07-28 19:57:31 +00:00
c405e84a24
port --> iobase
1994-07-28 09:50:33 +00:00
d02e11d543
Make the EISA reset code like the other drivers.
1994-07-28 08:44:47 +00:00
fb500c4d07
Redo some of the EISA config stuff.
1994-07-28 02:39:21 +00:00
c1a5741a3b
Remove unused macros.
1994-07-27 15:02:59 +00:00
5e04cfb942
Fix typo.
1994-07-27 13:24:17 +00:00
4ac4810048
Normalize.
1994-07-27 13:14:14 +00:00
1939acdbd2
Fix the DMA setup.
1994-07-27 13:10:33 +00:00
1a9c6d05a3
Enable IRQ probing, and fix the DMA setup.
1994-07-27 12:57:02 +00:00
dffcd8ea8d
Enable IRQ probing.
1994-07-27 03:09:21 +00:00
16878bf2f9
Enable IRQ probing.
1994-07-27 01:50:57 +00:00
35b4db3030
Add IRQUNK.
1994-07-27 01:50:15 +00:00
863c736e39
Normalize label handling.
1994-07-26 19:39:19 +00:00
b5ce4d0cdd
Normalize label handling.
1994-07-26 19:36:06 +00:00
a18c0c0d83
Look for errors in the right place in a transmit descriptor, and count
...
collisions.
1994-07-25 22:54:58 +00:00
220a5a5095
Add missing splbio()s, pointed out by Gene Stark.
1994-07-25 04:29:56 +00:00
1c46c460ee
Return EINVAL if the requested transfer size is weird.
1994-07-21 23:44:16 +00:00
7fca65c005
Remove something which cannot possibly be correct.
1994-07-21 04:15:05 +00:00
37dc11891c
Fix a typo.
1994-07-21 03:40:53 +00:00
4469aea569
Do the EISA probing a little differently.
1994-07-21 03:30:18 +00:00
3013b3fdbc
check if eisa card exists before tromping on dma
1994-07-21 02:51:53 +00:00
cc9da7d69f
Fix failed probe message.
1994-07-16 13:45:59 +00:00
e88e13f3bb
Fix a bogon relating to >16-bit addresses that I introduced. Fix up BPF
...
support for received packets.
1994-07-15 21:20:48 +00:00
db0e00db86
Clean up a bit.
1994-07-10 17:53:12 +00:00
668c4747b3
Rename flags; clean up a bit.
1994-07-05 21:20:20 +00:00
b10a5d5fac
change to support other MAXPARTITIONS vals aside from 8
1994-07-04 20:39:46 +00:00
3214723fcf
These should have been the 4.4Lite versions. duh.
1994-07-02 06:03:47 +00:00
801d30952a
ISDEBUG --> LEDEBUG, and fix some ugly code.
1994-07-02 04:13:16 +00:00
943735dc41
modifications to the threshold and nicer error checking from christos
...
and .. splhigh() around insw/outsw code.. yetch
1994-07-01 23:08:11 +00:00
73aca695ac
Make sure we don't leave the interrupt masked after some errors.
1994-07-01 21:38:19 +00:00
2f609096e4
Inline le{rd,wr}csr().
1994-07-01 21:34:40 +00:00
bf74fc41d1
Add prototype.
1994-07-01 21:33:20 +00:00
f62bc452ca
Correct some comments.
1994-07-01 21:31:14 +00:00
66e72cdf4b
Rename is to le, and add support for some models of DEPCA.
1994-07-01 20:25:25 +00:00
fd7c79353e
knf
1994-06-29 23:32:42 +00:00
fccfa11af5
New RCS ID's, take two. they're more aesthecially pleasant, and use 'NetBSD'
1994-06-29 06:39:25 +00:00
cf92afd66e
New RCS ID's, take two. they're more aesthecially pleasant, and use 'NetBSD'
1994-06-29 06:29:24 +00:00
89e331dcad
new standard, minimally intrusive ID format
1994-06-27 19:40:57 +00:00
6f9db1ee2d
Concat disk driver moved from hp300/dev to here.
1994-06-24 14:11:02 +00:00
72679b6801
Fix a comment.
1994-06-19 03:29:37 +00:00
7d3285c3d4
resolve confusion over who owns the buf after calling scsi_scsi_cmd()
1994-06-16 15:57:39 +00:00
a69dd750a2
b_un.b_addr -> b_data
1994-06-16 01:07:30 +00:00
72cf8eaa9d
kill some pre-lite code that was #ifdef'd appropriately
1994-06-14 00:25:43 +00:00
f4a9e46aaf
Fix unimportant typos.
1994-06-13 18:54:41 +00:00
ff9c5cdde5
Set `uio_procp' field in case we ever need it.
1994-06-09 20:00:13 +00:00
3b4b77ca23
Reverse sense of vfinddev().
1994-06-08 11:19:41 +00:00
bb4ba15c7f
Add (experimental) 24f handling.
1994-06-08 11:16:49 +00:00
00eb72f54b
two fixes from christos
1994-06-04 01:52:28 +00:00
9bc7771492
Allow the probe to succeed again on 445S cards.
1994-06-03 15:56:18 +00:00
6b63c739f3
bsd 4.4-lite pmax port as ported to NetBSD
1994-05-27 08:57:32 +00:00
37c76e16d1
Only print the blasted messages *once* per error.
1994-05-27 08:54:52 +00:00
377b097932
upgrade to bsd 4.4-lite code base. only mod is rcsids
1994-05-27 08:39:00 +00:00
30c08c899f
Copyright foo.
1994-05-25 20:41:53 +00:00
0645f8963f
Check the bus type, and don't attempt to enable the round-robin algorithm
...
on early boards. As suggested by Atsushi Murai.
1994-05-24 13:39:15 +00:00
a9376b883a
MIN --> min
1994-05-24 07:31:12 +00:00
ebcaebd335
MIN -> min, MAX -> max
1994-05-24 02:35:53 +00:00
cf1b01e3cc
provide upgrade notice
1994-05-24 01:05:33 +00:00
057dc4deec
quiet compiler warnings
1994-05-23 03:02:13 +00:00
e47989d1e5
turn off spontaneous printing of messages when DEBUG turned on
1994-05-23 02:33:23 +00:00
18dab72811
32bit eisa does not work now, do not even try
1994-05-21 05:34:02 +00:00
922959fd05
Reverse the order of disabling shared memory and turning off 16-bit mode
...
where necessary, per Steve Wallace.
1994-05-19 07:47:34 +00:00
949b970c95
Use ether_ifattach() rather than doing the same thing in each driver.
1994-05-13 06:13:43 +00:00
d023a319a4
Nuke some junk in scsi_link, as pointed out by Gordon.
1994-05-12 22:16:04 +00:00
7040f728a9
Fill in some more struct ifnet fields.
1994-05-11 12:09:17 +00:00
19017044cf
Get rid of the private vnread() and vnwrite(); they are the same as rawread()
...
and rawwrite().
1994-05-11 10:03:59 +00:00
02ec14c597
Add dummy *dump() routines.
1994-05-11 09:49:17 +00:00
ef8ba60d24
Device strategy functions return void again.
1994-05-11 04:26:17 +00:00
bd96a072fd
Nothing of consequence.
1994-05-11 02:28:42 +00:00
95faa87c60
remove union's from sense_data struct, conditionaly define RAW_PART
1994-05-09 07:40:47 +00:00
fcdc2b3f3f
Remove now-bogus cast.
1994-05-05 08:31:44 +00:00
5f478330e8
Remove now-bogus casts.
1994-05-05 08:31:00 +00:00
04df00527c
Retool the state machine is a sane way.
1994-05-05 08:26:13 +00:00
685508a6b4
Remove now-bogus cast.
1994-05-05 07:52:53 +00:00
a211907a8b
Remove now-bogus cast.
1994-05-05 07:41:44 +00:00
a0a7429482
lots of changes: prototype migration, move lots of variables, definitions,
...
and structure elements around. kill some unnecessary type and macro
definitions. standardize clock handling. More changes than you'd want.
1994-05-05 05:35:42 +00:00
a9c3f137b5
Don't frob the connector type if the card doesn't grok soft config.
1994-05-05 02:20:44 +00:00
e5c1d566ef
Really fix the Buslogic/DTC problem.
1994-05-03 20:53:54 +00:00
0ee51c2c8b
Forgot to munge the #includes in last commit.
1994-05-03 20:32:22 +00:00
884168ce49
Move beep junk to clock.c.
1994-05-03 08:23:55 +00:00
36a9bcce8d
Fix argument to aic_sched_msgout() is several places, and condense some code.
1994-05-03 08:20:43 +00:00
394be046a5
insw takes a word count
1994-05-02 06:37:10 +00:00
e0db92993a
change timeout/untimeout/wakeup/sleep/tsleep args to void *
1994-04-29 23:15:51 +00:00
mycroft