0272b2ab8e
Whole lotta cleanup wrt. how configuration data is stored internally, and
...
just lockmgr(), not our home-grown locking functions.
1999-01-12 00:21:47 +00:00
76b8bd8961
Add a (partial) list of what's left to do.
1999-01-11 22:46:51 +00:00
edd69ba694
Because memory mapped access doesn't fail only with the docking station
...
for the TI TravelMate 5000 but also with at least one Compaq NIC we
prefer I/O mapped access again. Fixes PR kern/6690.
1999-01-11 22:45:41 +00:00
67e9d2a3bf
Fix a few glitches in the nwscons tga driver, PR #6655 , Brett Slager.
1999-01-11 22:11:36 +00:00
ae8a556ce5
Add missing XS_SELTIMEOUT case in user command completion path, returning
...
SCCMD_TIMEOUT. Based on PR #6720 , Andreas Wrede.
1999-01-11 22:07:08 +00:00
1eba733d91
remove dummy "load_font" entries
1999-01-11 21:35:54 +00:00
33b1cd5328
Oops, "square root" is Unicode 221a, not 211a!
1999-01-11 20:48:10 +00:00
2379551296
add 2bpp support, for sake of NeXT monochrome displays, from
...
matt debergalis <deberg@mit.edu> KB1CTH per PR kern/6741 and kern/6786,
minimally corrected
1999-01-11 11:08:14 +00:00
5c5590465e
Avoid `void *' arithmetic. Fixes PR 6783.
1999-01-10 21:57:19 +00:00
3fbb44a7bb
Make MTIOCRDSPOS, MTIOCSLOCATE, etc. work with write protected tapes.
...
Patch supplied by Dave Huang in PR kern/5305.
1999-01-10 21:46:39 +00:00
f963dc8ddb
Some minor updates from FreeBSD.
1999-01-10 19:13:15 +00:00
af7f630631
Some patches from FreeBSD.
1999-01-10 18:42:10 +00:00
ebd59cb48c
Make sure to check the modifier map for the windows keys.
1999-01-10 18:36:57 +00:00
c437dc4229
Remove redundant test if the unit numbers is in range.
1999-01-10 18:22:14 +00:00
d47a7fb7e0
Rename the "windows" keys and add the new keys to the keyboard maps.
1999-01-10 16:56:35 +00:00
17570494a7
Add back a line that was lost somehow.
1999-01-10 16:38:54 +00:00
9b1eddc4f1
- Set up the interface watchdog timer on sends. This fixes the hangups
...
reported by Matthias Scheler <tron@lyssa.owl.de> in PR kern/6772.
- After receiving, check whether the receive DMA pointer became 0
what obviously happens if the list runs out of entries. Simply reinit
in this case. This fixes receive lockups after DDB use observed
by myself.
Unstall the receive engine if the ELINK_UPPKTSTATUS indicates that it
was stalled. (Don't know when this might happen. FreeBSD does so.)
1999-01-10 14:19:46 +00:00
851c51418d
Add definitions for Pause and Print_Screen keys.
...
(Why were these keys missing? Or am I missing something obvious here?)
1999-01-10 13:20:41 +00:00
a15a03eff2
Since ukbd has an own map, this file is not needed anymore.
1999-01-10 13:20:21 +00:00
fe099e481b
Add definitions for left and right "Windows" keys and menu key.
1999-01-10 13:14:42 +00:00
3fb390a04f
Fix buglets in translation to raw scancodes.
1999-01-10 13:11:25 +00:00
07e0165b97
Update/add URLs to relevant USB specs.
1999-01-10 11:13:36 +00:00
9e121cf158
Add ukbdmap.c.
1999-01-10 11:09:02 +00:00
ddb8209b40
XXX Add a disgusting hack to make the CS sound chips work in PnP mode.
...
XXX Read about it in isapnp.c.
1999-01-10 10:23:24 +00:00
1a68014a66
Move a declaration.
1999-01-10 10:17:54 +00:00
ec1a086c80
Make the error condition of neither 0x70 or 0x71 error codes a tad
...
more informative than the lower case 'error code %d'.
1999-01-10 06:26:23 +00:00
e618c0c7d7
turn on SBUS bursts
1999-01-10 06:22:12 +00:00
9d702f60ed
+ Some basic deadchip detection.
...
+ Enable FIFO bursts, but also detect bogus 1040A with busted FIFO.
+ Use new MEMZERO crossplatform define.
+ Handle RQCS_QUEUE_FULL status case and let upper layer parse SCSI ststus
byte if nonzero (should be 0x28- Queue Full status)
+ Fold ISP_NVRAM_FIFO_THRESHOLD_128 into isp_fifo_threshold tag.
1999-01-10 05:07:53 +00:00
f1dfa06e13
bump isp_fifo_threshold tag top 3 bits
1999-01-10 05:04:46 +00:00
b503bb5337
cross platform define MEMZERO added
1999-01-10 05:04:18 +00:00
4401c8bdd7
oops. Forgot to turn on PCI burst.
1999-01-10 03:41:47 +00:00
b2acf0b9f2
Change from bcopy/bzero to memxxx. From PR 6778 by
...
Erik Bertelsen <erik@q610.ebe.uni-c.dk>.
1999-01-10 00:28:21 +00:00
17e4ccc73d
Use a special map for USB key code translation instead of first translating
...
to an XT scancode and then to the wscons code.
XXX The XT translation is still available in "raw" mode.
1999-01-10 00:23:32 +00:00
422d1bfb5d
implement the option to swap left CTL and caps lock key, from
...
URA Hiroshi <ura@yamato.ibm.co.jp> per PR kern/6775
1999-01-09 16:21:10 +00:00
a2b9f1ba6e
add a definition for the "swap ctl and caps" option
1999-01-09 16:18:38 +00:00
5639141200
add ioctl()s for screen allocation/deallocation
1999-01-09 15:44:45 +00:00
a541ccbcb2
rename "struct wsdisplay_conf" -> "struct wsscreen_internal" to reflect
...
its real meaning
support allocation and deallocation of virtual screens at runtime
implement a "control device" (minor number = 255) and ioctl()s for screen
allocation/deallocation
minor fixes to consistency checks / error handling
1999-01-09 15:42:34 +00:00
98e630dbe0
Allow to deallocate also the currently visible virtual screen (unless
...
it is the console).
This requires vva_show_screen() to catch the case where it has no screen
to switch from, ie no need to save the current state.
1999-01-09 15:29:26 +00:00
9b3e9f45bf
A minor fix for FreeBSD.
1999-01-09 12:16:54 +00:00
c3283b267e
there is no "cnattach" member in "struct wskbd_accessops" (yet?)
1999-01-09 12:10:36 +00:00
268eb959c4
Make this compile again after the void * arith changes.
1999-01-09 03:16:17 +00:00
1a56840ec0
Make this compile again after void * arithmetic changes.
1999-01-09 03:05:19 +00:00
c35b8b591b
One more cosmetic change, from Izumi Tsutsui.
1999-01-08 19:55:17 +00:00
0d32a9a78b
Fix more `void *' arithmetic.
1999-01-08 19:22:34 +00:00
332d7c138f
Avoid arithmetic on `void *' since that's not ANSI C.
1999-01-08 18:10:35 +00:00
875aa92d2c
Various little fixes from the FreeBSD version.
1999-01-08 11:58:25 +00:00
d7154c29c9
Regen.
1999-01-08 11:19:57 +00:00
5ea77d0457
Remove some non-products.
1999-01-08 11:18:38 +00:00
d8a5db5c2c
Regen.
1999-01-07 22:30:36 +00:00
df6da0d80b
Generate appropriate RCS headers.
1999-01-07 22:18:23 +00:00
012d8f3eab
Fix typo in FreeBSD part of the code.
1999-01-07 22:12:08 +00:00
86f2e214ed
Add some line continuations in the FreeBSD part of the file.
1999-01-07 22:09:00 +00:00
2fba866c77
On popular demand, back out the generation of a FreeBSD ID.
1999-01-07 03:27:26 +00:00
e4b5e096e8
Fix some FreeBSD compiler warnings.
1999-01-07 02:22:50 +00:00
07b2b872de
Fix some pastos.
1999-01-07 02:22:20 +00:00
8b76024ac9
regen.
1999-01-07 02:18:10 +00:00
1f1524514a
Ooops, I didn't mean to commit that. Back out.
1999-01-07 02:06:05 +00:00
02369a7cd2
Add another paranoia test in the interrupt routine.
1999-01-07 01:59:24 +00:00
1e0c9685af
Add a copyright header.
1999-01-07 01:57:11 +00:00
65a13df4e6
Generate FreeBSD RCS id as well.
1999-01-07 01:54:28 +00:00
028aac1137
Add Micro$oft Intellimouse.
1999-01-07 01:51:12 +00:00
3dc31bab2f
Device declaration for the PCscsi-PCI SCSI chip driver.
1999-01-06 23:25:53 +00:00
671d0ae88d
Device driver for the AMD Am53c974 PCscsi-PCI SCSI chip (i.e. the chip used
...
on the Tekram DC-390 SCSI cards), from Izumi Tsutsui, PR#6654. Minor
cosmetic changes by me.
1999-01-06 23:23:33 +00:00
71c86e3e92
Changes to NCR53c9x driver necessary to add support for the AMD Am53c974
...
PCscsi-PCI SCSI controller. From Izumi Tsutsui, PR #6654 .
1999-01-06 19:19:38 +00:00
69d3aa9606
don't install wskbdmap_mfii.h to userland
1999-01-06 12:24:51 +00:00
ed3f310c95
use new KS_KEYCODE macro from wsksymdef.h
1999-01-06 12:04:09 +00:00
1cd0f92455
add british keymap, from Patrick Welche per PR kern/6735
...
use new KS_KEYCODE macro from wsksymdef.h
1999-01-06 12:01:09 +00:00
f8402fc0be
add definition for british keyboard
1999-01-06 11:45:12 +00:00
363ea8b7ff
Regen.
1999-01-04 22:41:58 +00:00
67e990eed1
Add USR 56K Faxmodem, from jbernard@ox.mines.edu in PR 6729.
1999-01-04 22:39:42 +00:00
bfb7f2aaf3
Multisession-CD-Support, by Torsten Duwe <duwe@ns.lst.de>.
1999-01-04 15:32:08 +00:00
87121c3217
Regen.
1999-01-03 23:57:11 +00:00
c3ddc00ec9
Add an Acer scanner.
1999-01-03 23:55:01 +00:00
3744944266
Regen.
1999-01-03 11:06:31 +00:00
d621c7bd68
Add Kensington Mouse-in-a-Box.
1999-01-03 10:56:33 +00:00
497a2c58c3
Regen.
1999-01-03 01:15:01 +00:00
c5412a11a4
Minor changes.
1999-01-03 01:12:41 +00:00
302f42d891
Add more CDC definitions.
1999-01-03 01:09:18 +00:00
6d990bf7f3
Add an ugly workaround for a bug (feature) in the NetBSD open()/close()
...
protocol.
1999-01-03 01:03:22 +00:00
bf1154922d
Add a length paarmeter to usbd_do_request_flags().
1999-01-03 01:00:56 +00:00
d0e7a99a8a
Giant change: NBPG now set to 4k and CLSIZE == 1 for vax. This change
...
made a whole bunch of annoying bugs disappear; mostly depending on
bad use of NBPG in non-MD code. The VAX port was the only port that
used this historical "feature".
The CL* macros should probably go away totally, there is no reason
at all to keep them.
1999-01-01 21:43:17 +00:00
000c8bbf35
Regen
1999-01-01 19:30:52 +00:00
512db6124c
Add Xircom Netwave driver from Michael Eriksson
1999-01-01 19:30:03 +00:00
c1edefd961
Fix bug in reading from interrupt pipe.
...
Make read and write on bulk pipes interruptible.
1999-01-01 15:31:24 +00:00
df2d00dcff
Add more structs.
1999-01-01 15:28:24 +00:00
16a2a55378
Add usbd_bulk_transfer(), a function to do interruptible transfer that
...
do not time out.
1999-01-01 15:25:57 +00:00
b7ae463e9f
Fix bug setting up endpoint descriptors for an interface.
1999-01-01 15:21:42 +00:00
a02f8e62f5
Add uDWord type for 4 byte USB structure fields.
1999-01-01 15:18:17 +00:00
bf9647a056
Set the correct transfer count on interrupt transfers.
1999-01-01 15:15:33 +00:00
dfd0f0f949
PR/6669: Michael Eriksson: pcic_chip_mem_alloc() can't handle large requests
1999-01-01 14:05:18 +00:00
87f8cbd14e
Add a Communication Class header file.
1999-01-01 07:43:13 +00:00
3a16b606a6
Implement autorepeat in raw keyboard mode.
1998-12-30 19:25:27 +00:00
a971be193b
Add USB keyboard type.
1998-12-30 19:15:11 +00:00
20f51aae57
Split usbd_delay_ms() into two functions, one can be used in
...
device drivers.
1998-12-30 18:06:25 +00:00
87fea0705b
Implement raw keyboard mode for X.
1998-12-30 18:03:37 +00:00
85ff7a3234
Fold line.
1998-12-30 17:48:48 +00:00
3b9a669a7d
Remove #include that slipped in at FreeBSD merge.
1998-12-30 17:46:20 +00:00
503bbd973d
Allow the wsmouse device to be opened for writing even if it is already
...
open, this way ioctl() can be performed on it and wsconsctl works.
1998-12-30 14:02:18 +00:00
44df4dcc85
Add a wscons display type `unknown' that the generic VGA driver can
...
return until someone fixes it for real.
1998-12-30 13:54:03 +00:00
446f262aa5
Regen
1998-12-30 13:50:42 +00:00
4d3847e0ea
Add NeoMagic MagicGraph 128ZV graphic chip.
1998-12-30 13:49:49 +00:00
a4a02fda54
Make it compile without USB_DEBUG, fixes PR 6689. Patch from
...
taca@sky.yamashina.kyoto.jp (Takahiro Kambe).
1998-12-30 13:25:54 +00:00
0ae031028d
Add a special wsmouse type for USB mice.
1998-12-30 13:14:21 +00:00
3fec12a459
Added parens around ADD_BYTES_LIM() macro definition to protects its
...
use of the low precedence ?: conditional operator. This fixes a bug
in scsipi_interpret_sense when printing out debugging info.
1998-12-30 11:17:34 +00:00
85299e125c
Regen.
1998-12-30 03:55:49 +00:00
cce7071d57
Add iMac devices.
1998-12-30 03:52:30 +00:00
21e272bf01
Do not blindly assume that a device supports language id 0, instead
...
ask it what languages it supports.
1998-12-29 16:02:55 +00:00
c047e03d90
Update copyright to the TNF standard.
1998-12-29 15:57:46 +00:00
9bcfc24c6b
Add some #if 0 code for keyboard console attachment.
1998-12-29 15:42:30 +00:00
5aa16bd113
Don't set configuration unnecessarily, some (broken) devices seem to break
...
if you do.
1998-12-29 15:33:10 +00:00
961d81ade7
Return more info in ioctl(USB_DEVICEINFO).
1998-12-29 15:27:16 +00:00
0f94f62616
The Peracom serial converter (like some other devices) claim to have
...
string descriptors, but gets very upset if you read them.
1998-12-29 15:23:59 +00:00
32f13388c5
Regen.
1998-12-29 15:21:33 +00:00
a7147eda73
Add Peracom serial converter.
1998-12-29 15:19:40 +00:00
6b5d35ee9d
Minor change in a debug printf.
1998-12-29 14:29:53 +00:00
683fd3dfba
Add some more useful #defines.
1998-12-29 14:27:33 +00:00
9ada0bf40f
check for end of tuple while reading cfe data
1998-12-29 09:03:15 +00:00
0380eb8f98
added SVEC_LANCARD
1998-12-29 09:00:50 +00:00
5d9e772403
added support for quirks based on cis strings, added quirk entry for SVEC_LANCARD
1998-12-29 09:00:28 +00:00
0de74697c4
rebuilt from pcmciadevs
1998-12-29 08:59:14 +00:00
b5f4f4dcfe
add SVEC losing ethernet card
1998-12-29 08:58:37 +00:00
47ff9e7c63
Implement short transfers.
1998-12-29 05:08:57 +00:00
fe9a1b2b2d
Implement short transfers.
1998-12-29 04:15:04 +00:00
3064141641
Make it possible to specify the request flags when issuing a raw USB request.
1998-12-29 03:13:10 +00:00
16b49a78c6
New USB attach args.
1998-12-29 03:09:48 +00:00
4c9147cd38
Remove part of the bigendian patch that was not supposed to be commited.
1998-12-29 03:01:44 +00:00
d4fa2978fa
Imprive debugging message.
1998-12-28 21:05:47 +00:00
4386ae98b0
Send more information to USB attach routines so that they can claim
...
multiple interfaces.
1998-12-28 21:05:26 +00:00
dfad58d4e0
Change the host controller internal API a little and add some incomplete
...
support for isochronous transfers.
1998-12-28 20:13:59 +00:00
d6cab14b00
clean up headers
1998-12-28 19:12:26 +00:00
8ac99457db
I mean *really* clean up headers
1998-12-28 19:12:04 +00:00
b51e3fbf3c
clean up headers; remove early revision 2100 workarounds
1998-12-28 19:11:32 +00:00
e5e787230b
clean up headers; move uninit/watch to outer layers
1998-12-28 19:10:43 +00:00
9ccf227085
clean up header
1998-12-28 19:07:38 +00:00
c9cf2c5601
Fix typo.
1998-12-28 16:41:11 +00:00
1256add6be
Update for new name in usb.h
1998-12-28 16:13:44 +00:00
bf9e279952
Prepare for wsconsctrl:
...
- clean up keycode defines.
- allow easy parse of wsksymdef.h.
- add misssing KB_IT entry.
- set layout to KB_USER after ioctl WSKBDIO_SETMAP.
1998-12-28 13:48:24 +00:00
020a909cba
Add a lot of byte swapping to get the code to work on big endian machines.
...
Patch from Tsubai Masanari <tsubai@iri.co.jp>.
Add an extra controller reset. According to the OHCI spec it shouldn't
be necessary, but without some machines don't work.
1998-12-28 12:56:19 +00:00
3c6b7ccc2a
Cosmetics.
1998-12-28 12:52:38 +00:00
f4133e9fae
Update timing again (for bad devices).
1998-12-28 12:35:27 +00:00
be8213d207
Add some isoc defines.
1998-12-28 03:27:00 +00:00
2e0dbd3cc0
Add another power up wait so that some devices (that do not follow
...
the spec) start up more reliably.
1998-12-28 02:23:25 +00:00
cd36ca65dd
Fix typos.
1998-12-28 02:20:28 +00:00
8fe37fa62c
Cosmetics.
1998-12-28 02:06:25 +00:00
6afab47ac5
Be more careful when forming the TD endpoint field.
1998-12-27 23:40:52 +00:00
5c3f51a42a
Add quirk for bad version no. in audio control descriptor.
1998-12-27 23:38:13 +00:00
33f1482ece
Make sure recording is started before we return EWOULDBLOCK in a read().
1998-12-27 23:25:32 +00:00
496387c419
Fold lines to 80 chars.
1998-12-27 22:52:23 +00:00
da39a16267
Fold lines to 80 chars.
1998-12-27 13:03:58 +00:00
e0c228ae9c
Merge changes to make the USB stack work with FreeBSD. The original
...
diffs from Nick Hibma <n_hibma@freebsd.org>, but with substantial
changes from me.
XXX Not tested on FreeBSD yet.
1998-12-26 12:53:00 +00:00
2718914e14
fix incorrect panic message
1998-12-25 16:50:08 +00:00
ae7cea0a83
initialize a variable to avoid a false compiler warning.
1998-12-25 00:54:46 +00:00
b5afabb89a
check in generated files again so the included CVS id is correct
1998-12-25 00:54:11 +00:00
1a6e9eab49
add quirk support for cards which lie extensively about their CIS
1998-12-24 04:51:59 +00:00
2636bc951d
add code to permit pcmcia intr debugging
1998-12-24 04:50:43 +00:00
2cf34a47e0
The PCMCIA_PRODUCT_3COM_3CXEM556 requires the same CCR hack as the
...
3c562.
1998-12-24 03:59:00 +00:00
b6a56aac7f
add an entry to the products array for the
...
PCMCIA_PRODUCT_3COM_3CXEM556.
This device requires the same CCR hack as the 3c562.
1998-12-24 03:57:45 +00:00
c9ffa39a53
add product id for 3Com/Megahertz 3CXEM556
1998-12-24 03:55:54 +00:00
e392d933c8
Clean up some debugging stuff, and make it compile without warnings
...
with -DDEBUG on alphas.
1998-12-22 20:03:14 +00:00
c81639d273
Change quirk entry: "FX320S", "", " q01" to: "FX320S", "", "q01". This
...
space does seem to matter...
1998-12-21 21:40:12 +00:00
71fa656b19
use a symbolic definition for the PCI subsystem ID
1998-12-21 20:56:06 +00:00
c896b644ba
use a symbolic definition for the PCI subsystem ID
1998-12-21 20:40:01 +00:00
ac7ba300c0
add two of the newer register definitions
1998-12-21 20:31:54 +00:00
ebbe6623e2
Regen
1998-12-21 17:22:33 +00:00
2da45b8352
Fix typo.
1998-12-21 17:18:29 +00:00
84f4ab4fd0
Regen.
1998-12-21 15:45:20 +00:00
3c75aecaf5
Add ADS ethernet adapter.
1998-12-21 15:42:59 +00:00
45b5108fb1
regen
1998-12-21 13:43:11 +00:00
70a2fcddc2
change name of 82443BX according to Intel's data sheet
...
correct "no AGP" case to real topology of the chip
clarification: s/AGP Device/AGP Interface/
1998-12-21 13:37:00 +00:00
ce816d0c65
Regen
1998-12-21 07:57:17 +00:00
e0bd7401e6
PR/6619: Rick Byers: Add Motorola ModemSurfr
1998-12-21 07:57:00 +00:00
981a2987e6
Regen
1998-12-20 18:54:52 +00:00
b8041892e9
Add another modem.
1998-12-20 18:54:37 +00:00
788ff053de
Fix up support for PCI attachments of pcic devices on i386 in general,
...
and the Cirrus Logic CL-PD6729 in particular.
From danw@mit.edu in PR port-i386/6436.
1998-12-20 17:53:28 +00:00
2e81b6b5f8
regen
1998-12-20 16:06:25 +00:00
6eb0418fdb
add a Zoran multimedia controller chip
1998-12-20 16:05:32 +00:00
6292c7eda0
Make midi_attach_mi() and audioprint() available also if MIDIBUS
...
(but not necessarily MIDI) is defined.
Fixes PR port-i386/6615 (Krister Walfridsson <cato@ulysses.df.lth.se>).
(XXX this should probably go into a separate file to get rid of
the #ifdef mess)
1998-12-20 14:26:44 +00:00
e3504362c9
Regen.
1998-12-20 03:53:03 +00:00
7003241eab
Add IBM Wireless LAN Entry and Xircom CreditCard Ethernet+Modem.
1998-12-20 03:52:40 +00:00
d114556e2a
Avoid using "generic" configuration table entries during first
...
resource allocation attempt - would crash system if a generic entry
preceded a workable specific entry.
Rearrange a little for clarity.
1998-12-20 03:49:53 +00:00
9670878a82
Regen.
1998-12-19 23:48:39 +00:00
f920aee0b3
Add original Xircom CreditCard Ethernet.
1998-12-19 23:47:51 +00:00
d15dc38fd9
Changes from FreeBSD:
...
Implemented a more sophisticated mechanism for handling transmitter
interrupts which now defers them until the transmit queue if filled
up with completed buffers. This has two advantages: first, it reduces
the number of transmitter interrupts to just 1/120th of the rate
that they occured previously, and two, running down many buffers
at once has much improved cache effects.
Defer rundown (m_freem) of completed transmit buffers for no longer
than 1 second.
This brings us up-to-date with the most recent "fxp" driver in FreeBSD.
1998-12-19 01:14:37 +00:00
cb707caaeb
Add the Compex Linkport ENET-B Ethernet card, PR #6349 , Ingolf Koch.
1998-12-18 22:10:29 +00:00
95b5eb860d
Regen.
1998-12-18 22:07:53 +00:00
fc685b5db5
Oops, tyop.
1998-12-18 22:07:39 +00:00
e2614a90c2
Regen.
1998-12-18 22:07:00 +00:00
1142e9ca93
Add the Compex vendor ID, and product ID for the Compex Linkport ENET-B.
...
PR #6349 , Ingolf Koch.
1998-12-18 22:04:48 +00:00
f64a09cf13
Replace a use of << with the LSOP macro, to fix a specific problem on
...
little-endian machines. PR #6390 , Ben Harris.
1998-12-18 21:59:34 +00:00
875666be42
Add the SVEC/Hawking Tech. Combo card. PR #6461 , Rafal Boni.
1998-12-18 21:54:14 +00:00
1f7f191ac9
Regen.
1998-12-18 21:53:08 +00:00
f86bb230f6
Add the SVEC/Hawking Tech. combo card. PR #6461 , Rafal Boni.
1998-12-18 21:52:53 +00:00
92229a04c1
Quiet some diagnostic messages when we might expect them to happen.
...
PR #6460 , Rafal Boni.
1998-12-18 21:50:16 +00:00
d9e7d7e6a1
Add support for the Corega PCC-T Ethernet, PR #6603 , Takahiro Kambe.
1998-12-18 21:14:17 +00:00
75553e60bf
Regen.
1998-12-18 21:12:32 +00:00
eee452e216
Add Corega vendor ID and product CIS info for the PCC-T Ethernet card.
...
PR #6603 , Takahiro Kambe.
1998-12-18 21:12:14 +00:00
30f21adec4
Regen.
1998-12-18 21:08:37 +00:00
6779120f4a
Add product ID for the Yamaha 724 Audio device. PR #6605 , Dave Sainty.
1998-12-18 21:08:19 +00:00
9595b984ec
teach fxp about rnd_*()
1998-12-17 23:25:29 +00:00
c9eb836a6a
Return ENODEV when the device capability check fails for MOVE and EXCHANGE
...
operations.
1998-12-17 22:28:07 +00:00
1b30d7e440
Correct the definition of the changer device capabilities page. The
...
previous definition confused some reserved bytes for exchange capabilities.
1998-12-17 22:27:18 +00:00
2d5b32dd03
fix an invalid panic message.
1998-12-17 17:45:08 +00:00
85078af6c4
Add a new quirk flags, "ADEV_NOSENSE", for devices that don't
...
handle properly the request sense command. Add <FX320S, , q01> as being
sense-unfriendly in the quirk table.
1998-12-17 13:05:05 +00:00
f1addbd3fd
Defer mapping of pci interrupt to pciide_mapregs_native(). This way,
...
the native interrupt shouldn't be mapped if a channel is in native mode,
but disabled.
1998-12-16 13:21:26 +00:00
945acd7834
Leave some room for the string-terminating char in temp. buffers.
...
Pointed out by Scott Presnell (thanks !).
1998-12-16 13:06:52 +00:00
c37bf0ccb4
Keep track of DMA errors, and downgrade the transert mode (UDMA ->DMA,
...
DMA->PIO) in case of 2 consecutive errors. Don't downgrade if the
PIO/DMA/UDMA modes were forced by a config flag.
1998-12-16 13:02:03 +00:00
1f0d6730cc
Switch to single-sector transfert mode only for the last retry, to let
...
a chance to the underlying driver to downgrade the mode first.
1998-12-16 13:00:02 +00:00
2093338697
Rearange the modes setup to allow these to be dyanmically changed. Fill
...
in the new "set_mode" callback.
1998-12-16 12:48:45 +00:00
94f32463dc
Add a callback to re-compute the modes used on a channel.
1998-12-16 12:46:47 +00:00
bbe8b4dde5
Add Byte Runner Technologies TC-400 and TC-800 driver from Eric S. Hvozda
1998-12-16 11:33:50 +00:00
b4cf442656
Fix a MIDI buffer overflow problem. Fixes PR 6583.
...
Patch from Ales Krenek <ljocha@ics.muni.cz>
1998-12-15 18:03:07 +00:00
4f720cad14
make sure programs cannot write to the screen while it is in graphics mode
1998-12-15 14:25:59 +00:00
cb022e620d
Initialize field to indicate fragment block.
1998-12-14 23:44:04 +00:00
2e89d55ed4
Deal with an unusual response on port selftest commands. This makes at
...
least John Kohl's crappy Dell box work.
1998-12-14 13:54:25 +00:00
8bb7627336
- Fix typos in commentary description.
1998-12-14 02:45:51 +00:00
b33907f299
Don't DMA the scsi command from or the sense data to the scsipi_xfer
...
directly. That would require that we map the scsipi_xfer into DMA
space. Instead, copy to/from the NCR CCB, which the script already
has to DMA to/from. These copies are small, and don't seem to affect
performance.
1998-12-13 00:11:37 +00:00
178fc3cc05
Step 3:
...
Use DMA maps for the actual data transfers.
1998-12-12 23:41:56 +00:00
95aa0d0b7d
Simplify the copy loops a bit.
1998-12-12 16:58:10 +00:00
90b7cbc727
Simplify argument to MGET(), to generate better code.
1998-12-12 16:36:24 +00:00
a6717054a4
Slight simplification to previous.
1998-12-12 16:31:34 +00:00
eeb8a988a9
Oops, I commited the wrong version before.
1998-12-12 12:18:26 +00:00
f8c84e3e97
Initialize variable to make gcc happy.
1998-12-12 12:06:53 +00:00
ef6d3553ea
Move initialization of sce around.
1998-12-12 11:59:28 +00:00
3cc30b3641
Step two:
...
Use DMA-safe memory for the script instances. The most important thing
here is that is guarantees that the script is contiguous in DMA space.
1998-12-12 00:19:13 +00:00
086b4b0bf1
Step one of bus_dma'ing the PCI NCR driver:
...
Separate the ncb (i.e. softc) members that are accessed by the script into
a separate structure. Allocate one of these structures in DMA safe memory
using bus_dma, and change RELOC_SOFTC to use the DMA address of this
structure.
1998-12-11 23:21:11 +00:00
fe3ce4e89a
Simplify the code dealing with the mbuf chain in dp8390_get().
1998-12-11 18:03:55 +00:00
09dd50c412
Regen.
1998-12-11 17:44:41 +00:00
d39ff672ac
Add Imation disk.
1998-12-11 17:43:31 +00:00
ba8bdebedd
Change a comment to reflect reality.
1998-12-11 16:01:16 +00:00
3e85b3dd48
Move spls around.
1998-12-11 00:05:07 +00:00
46e04a18a1
Take care of some lines > 80 chars.
1998-12-10 23:16:47 +00:00
b94cb7b768
Add a driver for the S3 SonicVibes chip. From OpenBSD and
...
Constantine Paul Sapuntzakis (csapuntz@cvs.openbsd.org ) with
some changes by me.
XXX The driver still needs work.
1998-12-10 18:47:18 +00:00
7f5c8f7db2
add Adaptec RAID units as devices that do not return geometry pages
1998-12-10 18:13:29 +00:00
95f1a325a2
Change a printf a little.
1998-12-10 16:13:48 +00:00
93e17878d1
Regen.
1998-12-09 23:57:58 +00:00
02d7f1236c
Some more touchup on the VIA Rhine chip model number, and so some
...
sorting.
1998-12-09 23:57:35 +00:00
2fbbdcc0cb
Fix bug that caused all ifp's to have if_xname ntwo0, which was rather inconvenient. Should use config_found on each port instead, but this works for the moment and it's quick.
1998-12-09 23:25:41 +00:00
35345a1311
make compile without USB_DEBUG, wrap lines to 80 cols
1998-12-09 19:24:28 +00:00
7a9cc5bfbc
Update for changed scsipi_xfer struct.
1998-12-09 08:37:50 +00:00
5335909035
BVME410 ethernet driver by 'maximum entropy'.
1998-12-09 07:33:59 +00:00
1fdafa2f13
Insert some splusb() since memory allocation and deallocation can
...
occur from an interrupt.
1998-12-09 01:02:29 +00:00
c8736358e3
Clear stall condition on interrupt pipe.
1998-12-09 01:01:24 +00:00
f8b9a417f0
Improvement to the ugen driver.
...
Better error checking.
Some code rearrengment.
1998-12-09 00:18:10 +00:00
28d60e8711
Use plaintest error messages for debugging.
1998-12-08 15:48:18 +00:00
d26c277522
Add a generic USB driver. It allows easy access to descriptors, the
...
control pipe via ioctl() and read() and write() access to bulk and
interrupt pipes.
1998-12-08 15:39:00 +00:00
4d19a06c27
Some minor API changes and additions.
1998-12-08 15:18:45 +00:00
dfff19e3d3
Take care of return code from uiomove().
1998-12-08 15:12:24 +00:00
43c3030bd5
Print plain text error codes.
1998-12-08 14:34:08 +00:00
0280322dcb
Change debug level of a printf.
1998-12-08 14:31:58 +00:00
1b499d8ce6
Make the OPL information string more informative.
1998-12-08 14:26:56 +00:00
997074f17c
Add a missing 'return' in an error path; noticed by Matthias Drochner.
1998-12-08 13:29:31 +00:00
10d50739c7
Actually, restructure scsipi_wait_drain() slightly.
1998-12-08 00:26:22 +00:00
8ebf1e8824
Remove xs_free_list; it no longer exists.
1998-12-08 00:20:16 +00:00
624619a881
When closing, wait for pending xfers to drain before deleting the reference
...
to the adapter.
1998-12-08 00:19:27 +00:00
dcc5f32c2b
When closing, wait for pending xfers to drain before unlocking the door,
...
and wait again before deleting the reference to the adapter.
1998-12-08 00:18:46 +00:00
1ddd2ffec0
- When allocating a scsipi_xfer, add it to the specified device's
...
pending_xfers queue.
- When freeing a scsipi_xfer, remove it from the device's pending_xfers
queue. If the queue is empty, and SDEV_WAITDRAIN is set, wakeup
those waiting for the queue to drain.
- Implement scsipi_wait_drain(), which waits for a device's pending_xfers
queue to drain.
1998-12-08 00:17:21 +00:00
98194169ea
When allocating a device's scsipi_link, initialize the pending_xfers
...
queue.
1998-12-08 00:14:41 +00:00
126dc6bfcc
- Remove the "free_list" member from scsipi_xfer. Add "adapter_q" and
...
"device_q" TAILQ entries. The former is for use by the adapter driver,
as it sees fit. The latter is for the scsipi middle layer to track
pending xfers per device.
- Add a pending_xfers queue to scsipi_link, to track pending xfers per
device.
- Grow scsipi_link's flags to int, and add SDEV_WAITDRAIN, to indicate that
we're waiting for the pending_xfers queue to empty.
1998-12-08 00:13:58 +00:00
337eb43541
NOMODESENSE for all Seagate ST19171- not just FC
1998-12-05 20:52:47 +00:00
d610e1ad3f
Update BA for new max_lun parameter for SCSIbusses. Clearify maximum luns
...
for FC HB based upon a SCCLUN define (15 for normal- 255 out of a possible
65535 for SCCLUN). Propagate loopid as adapter_target.
Roll minor platform version. Roll core version number.
Update mailbox definitions with cleaner target mode structure definitions.
Clean up some ENDIAN stuff. Correct botched ISP2100_NVRAM_HARDLOOPID offset.
1998-12-05 19:48:23 +00:00
74bc9f26d5
Update HBAs to incorporate the new max_lun property.
1998-12-05 19:43:33 +00:00
4b8245a959
Add a max_lun property to match with the max_target property. Shorten
...
max_target to int16.
1998-12-05 19:41:31 +00:00
33fde1ad76
Eliminate the moreluns entry as it makes no sense for fat SCSI busses (e.g,
...
FC loops). Change the semantics of scsi_probedev so that it returns 1 if
you should continue probing at this target, else 0 for not.
Replace the blanket use of '7' with the use of the new sc_maxlun property
that is now gathered from HBAs. Allocate scsipi_link arrays based upon this.
Fix a really nasty and silly bug that has been there for a while where the
number of first level scsipi_link structures was one less than it needed
to be.
1998-12-05 19:39:23 +00:00
3f225e009d
Add Sigma Designs REALmagic Hollywood Plus MPEG-2 decoder
1998-12-05 19:02:14 +00:00
8f7f8d557d
made prototype for debug function wss_dump_regs match its definition.
1998-12-05 10:49:24 +00:00
9d51ff8e34
Roll to 1.15 f/w level for Qlogic 2100. Leave all flavors in, but control which
...
one gets compiled in by default. The default is private loop, non-expanded lun.
1998-12-05 00:28:05 +00:00
45fb6a3e74
Add in and enable latest SBus ISP Firmware (1.31)
1998-12-05 00:25:26 +00:00
3a08ae9402
always use unsigned numbers for screen positions (for sanity - the libkern
...
min() et al. did unsigned comparisions before)
make ROWS_ABOVE / ROWS_BELOW return signed values, the negative results
occur if the cursor is outside the scrolling region
1998-12-04 20:48:04 +00:00
9175cc0ddf
The chipset manual doesn't tell the truth about the channel enable
...
register bits. Replace by experimental result.
1998-12-04 17:30:55 +00:00
c10f6edafc
AT_ERROR should be different from AT_TIMEOUT. pointed out by Matthias Drochner.
1998-12-04 11:17:54 +00:00
19f705b094
Cast bus_space_{read,write}_multi arguments.
1998-12-03 23:33:45 +00:00
a68f1ef94c
Handle the case where the device does not support GET_PEPORT better.
1998-12-03 20:43:19 +00:00
bedb40a78c
Use umodem as the modem driver stub.
1998-12-03 19:58:09 +00:00
47ab212504
Rename pio_mode, etc ... to PIO_cap, etc ... for consistency with the
...
ata_drive_datas struct. Suggested by Soren S. Jorvan.
1998-12-03 18:24:30 +00:00
71f33dbfa5
UDMA->Ultra-DMA in a printf
1998-12-03 17:30:32 +00:00
334abc06cf
Correct definition for SIS_TIM_UDMA_EN macro. Ultra-DMA should now work ...
1998-12-03 17:29:01 +00:00
e39a5bdc53
Now that vtophy() is no longuer used, re-enable WDCDEBUG, with
...
wdcdebug_pciide_mask = 0 (so that one can easily patch this variable and give
me more informations :)
1998-12-03 17:27:57 +00:00
2b28c858d8
add a udma_mode field to wdc_softc, and use it the same way dma_mode is used
...
(higthest ultra-dma mode supported). There may be a higther ultra-dma mode
defined ...
1998-12-03 15:38:59 +00:00
1b04131eff
Try a bit harder to detect the physical failure of a component, and to
...
mark that component as dead. Physical failures are handled much better now.
1998-12-03 15:14:40 +00:00
3f3d8e85e6
If a configuration fails due to a non-existant spare, remember to release
...
any previously allocated components before bailing. Credit to Manuel Bouyer
for noticing this.
1998-12-03 15:06:25 +00:00
679de7e878
Fix (potential) referencing of null pointer in (verbose) debugging mode.
1998-12-03 14:58:24 +00:00
ba90b4b2d3
Add URLs of documentation source (from Matthias Drochner).
1998-12-03 14:06:16 +00:00
7d87d6a5f6
Use correct register when disabling the second channel.
1998-12-03 13:50:38 +00:00
8ef785add8
Restore changes from revision 1.17:
...
"If a channel has no drives, do *not* unmap its I/O regions.
It's not really safe to use them for anything else, and in legacy mode it
will just cause us to probe the channel again as an ISA device."
1998-12-03 13:30:00 +00:00
1af63c0605
Correct a few bogons in the SiS chip initialisation.
1998-12-03 13:25:44 +00:00
09408781c9
Ouh ! Correct the 8-bit PCI registers reading/writing functions: need to
...
multiply the register offset by 8.
1998-12-03 13:24:11 +00:00
2228eaca8a
Add configuration and interface locators.
1998-12-02 22:57:08 +00:00
cf75925c7f
Even shorter printfs at attach.
1998-12-02 22:54:52 +00:00
4b4afb8252
Regen.
1998-12-02 22:51:50 +00:00
7270b91afe
Shorten some vendor names.
1998-12-02 22:49:51 +00:00
e424a174ba
Add stub for a modem driver.
1998-12-02 22:47:19 +00:00
fd3af06364
Avoid wrapping lines in attach printfs.
1998-12-02 17:20:20 +00:00
7d417ca964
Handle compound devices in usbd_get_report_descriptor().
1998-12-02 17:17:40 +00:00
c4dc0e3950
Regen.
1998-12-02 17:14:53 +00:00
65145fce2c
Fix typo.
1998-12-02 17:11:51 +00:00
41095ae62a
Add some new devices.
1998-12-02 17:02:59 +00:00
1d5d5ab40a
In struct wdc_xfer, change 'channel' to a pointer to a channel_softc, to avoid
...
a double-pointer dereference at run-time. Suggested by Matthias Drochner.
1998-12-02 15:53:34 +00:00
45675ab14b
- change drive_flags from u_int8_t to u_int16_t
...
- keep the modes supported by the drive in struct ata_drive_datas (will be
later used for downgrading the DMA/PIO mode on error)
- use config flags to force/disable PIO/DMA/UDMA modes
- For the CMD PCI0643/6 setup DMA mode to DMA Read multiple.
1998-12-02 10:52:24 +00:00
a5d7ea15aa
Regen.
1998-12-02 09:43:15 +00:00
8692433023
add the compat id for the aha-1542cp
1998-12-02 09:42:57 +00:00
thorpej