2824f4906d
Ensure all INSTALL* kernels have two ptys, and a note explaining why:
...
pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
(Some installers may not be using sysinst, in which case this just reduces
the number of ptys from 16 that are not used to 2 that are not used)
For i386 conf files, no change other than comments.
2000-10-02 18:43:34 +00:00
7ca3fb9ef0
Move the check for "promisc + unicast + not for us" into ether_input(),
...
and change Ethernet drivers to always pass all received frames to
ether_input() (with a few exceptions, which are documented in the
code).
2000-10-01 23:32:39 +00:00
442b9b5df2
Get the correct OF node of the screen because PowerBooks have two screens
...
in one PCI device.
2000-10-01 19:08:30 +00:00
cdb3d9df80
Add sip* at pci.
2000-09-29 14:45:59 +00:00
e256cfb9ec
Fix a bug that prevents the kernel from detecting the root device.
2000-09-29 10:14:20 +00:00
3ef92f0bdb
Use "options<SPACE><TAB>" not "options<TAB>" - noted by simonb.
...
Move VNODE_OP_NOINLINE and NFS_V2_ONLY into '# Filesystem options' section.
Consistently label '# Filesystem options' and '#File systems' sections.
2000-09-25 13:54:50 +00:00
ccf1c822a6
Ensure all INSTALL config files have (at least) COPTS="-Os", cincluding bebox
...
based on it working already for macppc.
Also add commented out:
#options VNODE_OP_NOINLINE # Don't inline vnode op calls
#options NFS_V2_ONLY # Exclude NFS3 and NQNFS code
as suggestions for additional savings
2000-09-25 11:46:37 +00:00
5836de14e4
Fix a bug introduced in BOOT_FLAG change.
2000-09-24 16:16:37 +00:00
b1f94e26ab
don't specify number of ptys if >= 16 (current default initial number)
...
pty comments: normalize and g/c what is no longer relevant
2000-09-24 15:59:26 +00:00
49c105ffdb
add new macro BOOT_FLAG() (defined in <sys/boot_flag.h>) - this
...
maps standard boot flags to corresponding RB_* values
use BOOT_FLAG() in port's MD code as appropriate
as discussed on tech-kern, add new boot flags -v, -q for booting
verbosely or quietly, and corresponding AB_VERBOSE/AB_QUIET
boot flags; also add FreeBSD-compatible bootverbose macro and
NetBSD-specific bootquiet macro
for hpcmips, use new bootverbose instead of it's own hpcmips_verbose
Tested on i386, and to limited extend (compile of affected files) also for
mvme68k, hp300, luna68k, sun3.
2000-09-24 12:32:31 +00:00
e9a2baa2ff
Grab a major # for USB scanners.
2000-09-23 04:30:08 +00:00
72a24b4eae
Add an align argument to uvm_map() and some callers of that
...
routine. Works similarly fto pmap_prefer(), but allows callers
to specify a minimum power-of-two alignment of the region.
How we ever got along without this for so long is beyond me.
2000-09-13 15:00:15 +00:00
a0cf020afb
Configure L2 cache if it is not enabled by the firmware.
2000-09-12 14:47:38 +00:00
dfcd3bca08
On G3 and G4, display short message if L2 cache is not enabled.
2000-09-05 15:29:28 +00:00
2e72bb2b72
Add fr key layout. (From Manuel Bouyer, modified by me)
2000-09-01 16:00:38 +00:00
f671e87235
Add an argument to need_resched macro.
2000-08-28 11:52:59 +00:00
077c9ca312
Enable hash filter mode.
2000-08-28 11:27:44 +00:00
308d7eb3e4
Add (experimental) awacs audio driver. Output (play) only.
2000-08-25 12:44:42 +00:00
4678e2bb87
Correctly spell DRIVER. Noted by Tsubai. :-)
2000-08-23 19:15:25 +00:00
5558e41363
New PowerBook (firewire) seems to use edge-triggered interrupt.
...
XXX cannot hot-plug yet
2000-08-23 12:18:17 +00:00
58e7a6954b
Add spllock(). See spl(9) for details.
2000-08-22 19:46:26 +00:00
365ec2aa42
Scheduler locking changes.
2000-08-21 18:46:03 +00:00
23a7f255d4
Make sure we provide splsched() as described in spl(9).
2000-08-21 02:06:31 +00:00
31ec486214
Correct asm parameter to avoid gcc uninitialized warning.
2000-08-20 07:48:45 +00:00
1267826d5d
Increase stack size.
2000-08-20 07:04:59 +00:00
58aaeaae7f
In decr_intr(), update lasttb only when clock interrupt is not masked.
2000-08-20 07:02:41 +00:00
d832bf8e95
Add "type" argument to openpic_enable_irq().
2000-08-20 06:56:42 +00:00
17c0d4d853
Add some new partition types, and flags. Have the Apple Partition Map
...
code ignore the new partition types, and look for the new "USR" partition
flag.
From SUNAGAWA Keiki <kei_sun@ba2.so-net.ne.jp> with slight changes by me.
Closes PR port-macppc/10046
2000-08-18 22:40:28 +00:00
85dda25e94
move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
...
as it is no wthe default setting for everyone.
the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.
2000-08-13 01:31:15 +00:00
eef346a5ec
Don't try to change subordinate bus number if pchb != grackle (for now).
2000-08-02 09:02:46 +00:00
43b5c0039c
Enable rnd.
2000-08-01 08:23:37 +00:00
5f1e746912
Remove duplicated entry 22 in chrtoblk table.
...
Pointed out by Greg Kritsch on port-macppc mailing list.
2000-07-30 07:17:27 +00:00
46ab3e89fb
Use libsa alloc().
2000-07-25 06:26:18 +00:00
dd54c272e5
Add ofwboot.{mrg,xcf} to CLEANFILES.
2000-07-25 06:22:05 +00:00
8dc7633036
Make this compile again.
2000-07-25 06:18:23 +00:00
13f68a994d
Enable console in initppc().
2000-07-25 05:44:27 +00:00
7cf89e2181
Allocate temporary buffer to copy OF page table dynamically
...
rather than static variable.
2000-07-25 05:41:30 +00:00
e651decb55
We don't need to include the # VIA VT82C686A integrated AC'97 Audio as it
...
is integrated into the Southbridge on a number of i386 motherboards - we
won't be seeing that in a mac. :-)
2000-07-25 02:33:30 +00:00
a6d6bce652
Add a bunch of pci audio drivers. Most are commented out as they haven't
...
been tested on macppc. But I tested the eap for playback and it's fine.
2000-07-25 01:39:22 +00:00
a943e81da4
Delete kernfs.
2000-07-24 10:04:10 +00:00
20933708ec
switch to sys/conf/newvers_stand.sh for generation of version file
...
slighly adjust the Makefile WRT vers.c and SRCS & CLEANFILES
2000-07-21 21:42:25 +00:00
0eb897823b
There is no music device - g.c. its cdev_decl.
2000-07-17 16:57:19 +00:00
500013914e
Make timebase frequency value adjustable.
2000-07-14 05:53:31 +00:00
fba6fe287b
* Redo previous; set PIR on 604 and 7400 only.
...
* printf clean-up.
2000-07-08 07:23:17 +00:00
446c144ae3
Set PIR only if MULTIPROCESSOR is defined.
2000-07-07 13:22:06 +00:00
059d5818cf
include "opt_multiprocessor.h".
2000-07-06 23:27:29 +00:00
9ad1103d98
Make it compile with "options MULTIPROCESSOR".
2000-07-06 22:56:22 +00:00
db5c144019
make sure ofwboot.xcf gets installed
2000-07-06 19:42:55 +00:00
73db3f2b79
First attempt to spin up the secondary processor on 180MP and 200MP.
...
XXX Need more work.
2000-07-05 16:02:38 +00:00
b513be4daa
s/#include/include/
2000-07-04 22:25:06 +00:00
abs