Commit Graph

33 Commits

Author SHA1 Message Date
thorpej
e1f3e69604 * Move the mii_bitbang attribute into dev/mii/files.mii
* Pull in dev/mii/files.mii from conf/files, rather than playing
  the magic "files include order" dance in N machine-dependent
  configuration definitions.
2002-04-17 00:35:04 +00:00
ichiro
2aa38fbf8b add urlphy 2002-03-29 02:05:05 +00:00
chs
4b6d0e2df5 lxtphy needs the ukphy_subr attribute now. 2002-03-17 01:34:48 +00:00
lukem
ecb81c3f6d - convert usage of "defopt" to "defflag" where the relevant option does
not support a value (e.g., it's to be used as "options FOO" instead of
  "options FOO=xxx"). options that take a value were converted to
  defparam recently.
- minor whitespace & formatting cleanups
2001-11-28 10:21:10 +00:00
lukem
0fa231134c - replace "defopt" with "defparam" for options which must take a value,
as config(8) will warn for value-less defparam options
- minor whitespace/formatting cleanup
- consolidate opt_tcp_recvspace.h and opt_tcp_sendspace.h into opt_tcp_space.h
2001-11-20 14:34:18 +00:00
thorpej
85a7cdc261 Driver for the 10BASE-T portion of the AMD 79c901 PHY. 2001-08-25 04:06:26 +00:00
thorpej
158cb83996 Add a driver for generic HomePNA PHYs. Currently supports the HomePNA
portion of the AMD Am79c901.
2001-08-25 03:21:38 +00:00
thorpej
b6aa674493 Driver for the Altima AC101 10/100 Ethernet PHY. 2001-08-24 17:54:32 +00:00
thorpej
41a68e94a9 Driver for the Level One LXT-1000 10/100/1000 PHY. 2001-07-12 21:54:40 +00:00
thorpej
aef9e7bea3 Code to handle generic ten-bit interfaces (1000BASE-{LX,SX} fiber
interfaces).
2001-07-12 18:49:38 +00:00
thorpej
0e863b15a6 Driver for the Marvell 88E1000 ``Alaska'' 10/100/1000 PHY. 2001-07-12 17:30:45 +00:00
thorpej
9987ee5249 Driver for the Broadcom BCM5201/BCM5202 "Mini-Theta" Ethernet
PHYs.  This is also the same PHY core as in the 3Com 3c905C.
The PHY is documented in the 3c905C manual.
2001-06-02 21:42:10 +00:00
thorpej
33a6994da1 Driver for Broadcom BCM5400-family Gig-E PHYs. Programming
information gleaned from FreeBSD.
2001-06-01 16:49:59 +00:00
thorpej
628a67ab31 Add a driver for the NatSemi DP83891 and DP83861 Gig PHYTER
10/100/1000 PHYs.
2001-05-31 16:06:58 +00:00
lukem
3aeb5f2f29 whitespace police 2001-02-24 01:59:46 +00:00
sommerfeld
ea313649ff defopt MIIVERBOSE 2000-06-11 02:13:34 +00:00
thorpej
0738a5d4ac Driver for the Davicom DM9101 10/100 Ethernet PHY. This PHY is found
on several inexpensive 10/100 Ethernet boards (e.g. D-Link DFE-530TX,
Winbond 10/100 boards), and is also the built-in PHY on the DM9102
10/100 Ethernet chip.
2000-02-02 04:29:49 +00:00
thorpej
b67d4809ed Add a driver for the National Semiconductor DP83843 `PHYTER' 10/100
Ethernet PHY.
1999-12-07 19:36:37 +00:00
thorpej
8fc600c3b1 Clean up the code that adds media a little, and make media selection
table-driven in preparation for some other changes to be made.
1999-11-03 22:30:32 +00:00
soren
6624cc41e9 Add Intel 82553 and TSC 78Q2120. 1999-09-04 23:58:55 +00:00
thorpej
567710942c Add a driver for "generic unknown PHYs", meant as a catch-all for
PHYs we don't have specific drivers for.  While this will not give
optimum operation, it will allow network interface drivers to at least
function while drivers for their specific PHYs are written.
1998-11-05 00:36:48 +00:00
thorpej
f66039cbce Routines common between the Uknown PHY driver (forthcoming) and other
PHY drivers.  This file has ukphy_status(), which is what PHY drivers
should use if media detection is done by decoding NWay.
1998-11-04 23:59:51 +00:00
thorpej
b097394468 Factor out some common code from all the PHY drivers (autonegotiation, for
now.)
1998-11-04 23:07:15 +00:00
thorpej
b5ebc7dd87 Driver for Seeq 80220/80221/80223 10/100 Ethernet PHYs. 1998-11-03 23:51:29 +00:00
thorpej
3f98e69b07 Driver for the Integrated Circuit Systems ICS1980 10/100 PHY. 1998-11-02 23:46:20 +00:00
thorpej
86fca03a0d Driver for the Level One LXT-970 10/100 Ethernet PHY. 1998-10-24 00:33:17 +00:00
thorpej
5bec554354 Driver for the 3Com internal PHY, found on 3c905B-TX cards (and maybe
some 3c905-TX?).  Partially from Frank van der Linden.
1998-08-12 08:46:20 +00:00
thorpej
f0d19c2ee1 Change the name of the attribute to "mii". 1998-08-11 00:05:36 +00:00
thorpej
e7643533b6 Adapt to MII layer changes. 1998-08-11 00:03:12 +00:00
thorpej
8354e68508 Remove "class" declarations, and add "devclass" declarations where
appropriate.  Fix several inconsistencies between device class and
attributes.  Mostly from Chris Demetriou.
1998-02-16 22:12:45 +00:00
thorpej
095c4c092d Adjust for config changes. 1998-01-12 09:23:08 +00:00
perry
fff05a68ab RCSID Police. 1998-01-05 07:31:05 +00:00
bouyer
10fcf021a5 Generic functions for the MII layer. mii attaches to mii-capable network
adapters, and provide media-selections and status to the parent.
This includes drivers for the Thunderland integrated PHY, and
National Semiconductor's DP83840A.
Note: The interface betweeen network controller and mii is not complete yet,
and will need some minors tweaks to support media auto-selection.
1997-10-17 17:33:45 +00:00