34b72dcf4a
Add defines for linux_sys_reboot.
2000-03-18 22:01:02 +00:00
48e59fc985
esp -> esp_isa
2000-03-18 21:50:20 +00:00
4a915758fd
esp -> esp_isa
2000-03-18 21:49:33 +00:00
9dd3a0973d
This turns out to be the wrong interface for what I needed -- but I'll leave
...
the code here for now.
2000-03-18 21:11:16 +00:00
513f613391
Add the RasterOps 24MxTV; this card operates in the same manner as two
...
other RasterOps boards we already handle. Information provided by
Greg Kerr.
2000-03-18 20:53:24 +00:00
a159733250
Regen.
2000-03-18 20:44:01 +00:00
50ef430f08
resync NOARGS lines with their definitions in kern/syscalls.master. resync STD lines with what is expected in .c files. (especially wrt adding const). Add missing prototype for setfsuid. Fix ptrace prototype.
2000-03-18 20:43:33 +00:00
fa21d7879c
Adjust linux_sys_ptrace_args to reflect inconsistencies across ports. Temporarily ifndef alpha around getfsuid since Linux/alpha doesn't seem to have it.
2000-03-18 20:42:14 +00:00
03dddfc09e
Preliminary support for 53c40x-based cards. Needs some more work.
2000-03-18 17:59:52 +00:00
b1d2b97787
Change footprint of ncr5380_intr() to match normal interrupt handler usage.
2000-03-18 17:14:34 +00:00
1d1321109f
Use bus_space on MIPS.
2000-03-18 17:07:46 +00:00
28b4015ca2
GC.
2000-03-18 16:52:20 +00:00
cae5843a06
Fix typo that caused lance chip not to be detected.
2000-03-18 16:20:06 +00:00
e1a7dc9b2a
Fix line wrapping.
2000-03-18 16:16:12 +00:00
6780878550
Fix pasto in previous.
2000-03-18 16:14:57 +00:00
0af581a1a1
Add a ncr5380_attach() routine which does part of the initialization, attaches
...
the scsibus, and does the addref/delref dance.
2000-03-18 16:13:22 +00:00
302a1bd362
Regen.
2000-03-18 15:01:33 +00:00
2ab04a0400
Add the Panasonic 4X CD-ROM Interface CArd.
2000-03-18 15:00:31 +00:00
7e9aa53f0a
nca -> nca_isa
2000-03-18 13:17:03 +00:00
5960b2aec6
Move some code around in preparation for nca_pcmcia.
2000-03-18 13:05:20 +00:00
c62e39490c
Check to make sure we get a valid handler ID in response to a TALK R3.
2000-03-18 08:07:50 +00:00
638726b0db
* rework the quirk table ('device_tab'):
...
* QUIRK_NOMSG only has any meaning when NCR_GETCC_WITHMSG
is defined. Therefore, there's no harm in using it when
NCR_GETCC_WITHMSG is not defined. so, simplify the table
by removing the #ifdef.
* there's really no point in having table entries after
an entry which will match everything.
* add some comments, clean up spacing.
* add an entry for "QUANTUM"/"ATLAS IV" drives with flags
QUIRK_NOTAGS|QUIRK_NOMSG. (I included the latter flag only
because everything else had it before! ... which means that
all the functionality added with the NCR_GETCC_WITHMSG define
would never get used! *sigh*) The latter fixes the problems
I was having on an Atlas, and should fix the problems mentioned
by Hans Hoppe <hopha@casema.net> in comments on PR#7694.
2000-03-18 06:59:02 +00:00
52b7212c58
undo the non-script changes from rev 1.87. They caused problems in
...
1.4.x and i have concerns (but no concrete proof) they will cause/have caused
problems in -current as well. Really, the right way to fix this is to
rewrite the driver, and push up tagged queueing handling into a common
middle layer that'll do it right in a low-level-driver-independent manner.
I'll fix my particular issues by using the ncr driver quirk mechanism.
2000-03-18 06:47:28 +00:00
d926d6fa47
#if 0'ed undo code for interface address addition failure.
...
it was a bit too strong, and forbids multiple addresses from
same prefix to be assigned.
now the behavior is the same as previous - memory leak on interface address
addition failure.
http://orange.kame.net/dev/query-pr.cgi?pr=218
2000-03-18 02:41:58 +00:00
e86957458a
Install "machineendian_machdep.h".
2000-03-17 22:36:31 +00:00
670d533d54
Keep the bit position even when the report descriptor says POP.
2000-03-17 18:09:17 +00:00
8caeaa49bd
Install "endian_machdep.h" required for "sys/endian.h".
2000-03-17 17:22:57 +00:00
d07596ff64
Allow mips endian_machdep.h to see _LITTLE_ENDIAN and _BIG_ENDIAN.
2000-03-17 11:47:43 +00:00
11bd453515
scsiprint() is needed even without scsibus'es, so move it to scsi_base.c .
2000-03-17 11:45:49 +00:00
bd1cc85c63
Use a kvtophys() hack for mips like for alpha. No idea if it actually works..
2000-03-17 11:30:14 +00:00
82ad0bf745
atapiprint() does not exist.
2000-03-17 11:23:23 +00:00
2b251ae99b
change about debug print.
2000-03-17 09:54:15 +00:00
5c0cae7a28
Fix botched merge in previous.
2000-03-17 09:25:22 +00:00
0bf221f2d9
- remove leftovers of FreeBSD code in #if 0/#endif
...
- fix a bug in ti_encap() where a NULL pointer could be used if we run out
of tx descriptors (return ENOMEM instead, and let the caller assert OACTIVE)
- sync boot messages with NetBSD's pci standart (print ti_name and irq
line)
- add a shutdown hook to stop the board, so that the board will not DMA at
random places while we're rebooting
- convert all but TIGON 1 transmit descriptors to use bus_space
(this last one isn't trivial to get rigth and I don't have the hardware to
test)
- If we can't map the mem space linar, retry to map it nolinear. Punt if
we couldn't map the mem space linear and we found a Tigon 1 chip.
With these changes a Tigon 2 board (netgear BA620 at last) can be used in
my DS20.
2000-03-17 09:20:16 +00:00
0a23aef85e
Resurrect a chunk of code from the ite driver that we lost along the way.
...
This code is necessary for SE/30 internal video, at a minimum.
2000-03-17 04:46:32 +00:00
512503c606
If we're reclaiming, and there are no dirty blocks, just return.
2000-03-17 01:26:52 +00:00
c3167b9545
Do previous better. Use FSYNC_RECLAIM as it was before.
2000-03-17 01:25:06 +00:00
edf942a988
In the `MY THAT'S GROSS' department:
...
Eliminate the recursive include of machine/endian.h from sys/endian.h.
2000-03-17 00:10:24 +00:00
9e21b6555a
In the `MY THAT'S GROSS' department...
...
Eliminate the recursive include of machine/endian.h from sys/endian.h.
2000-03-17 00:09:18 +00:00
08227b6c88
build stkbuf out of u_long rather than char for sys_ioctl() to ensure we get an aligned array
2000-03-17 00:01:48 +00:00
93eb82ff2f
Recognize the Intel InBusiness.
2000-03-16 23:41:40 +00:00
56460ec830
Regen.
2000-03-16 23:41:30 +00:00
3f182de5c6
Add product ID for the Intel InBusiness 10/100 Ethernet adapter (which
...
is an i82559 with a different product ID).
2000-03-16 23:36:44 +00:00
162b0b1dab
__P(()) -> __P((void))
2000-03-16 23:21:05 +00:00
cdc4484e47
Regen.
2000-03-16 21:51:45 +00:00
94f5fe4392
Add Altec ADA70 speakers and have them recognized despite announcing an
...
old rev of the USB audio spec.
2000-03-16 21:51:23 +00:00
88b591be30
Adapt to last VFS changes - add appropriate vfs_done routine.
2000-03-16 19:00:26 +00:00
139fcd8227
Bump kernel version to 1.4V - VFS op vfs_done added
2000-03-16 18:32:23 +00:00
34329d9139
regen.
2000-03-16 18:28:11 +00:00
348fff03fb
add I/O DATA USB-ET/TX USB ethernet adapter.
2000-03-16 18:27:21 +00:00
67d0de97b6
Change ufs_init() to keep global count of how many times it was called.
...
Resources are initialized still just once (on first call).
Add ufs_done(), which takes care of freeing all resources allocated in
ufs_init(). The resources are freed only when last user of the code exits.
2000-03-16 18:26:49 +00:00
03efc0b2b7
Add new VFS op routine - vfs_done and call it on filesystem detach
...
in vfs_detach(). vfs_done may free global filesystem's resources,
typically those allocated in respective filesystem's init function.
Needed so those filesystems which went in via LKM have a chance to
clean after themselves before unloading.
For each leaf filesystem, add appropriate vfs_done routine.
Also remember how many times ffs_init() was called and do
the appropriate initialization on first call only. In ffs_done(),
destroy the resources when called by the last user of ffs code.
Change mfs to call ffs_init()/ffs_done() appropriately.
2000-03-16 18:20:06 +00:00
89015c4648
Add new VFS op routine - vfs_done and call it on filesystem detach
...
in vfs_detach(). vfs_done may free global filesystem's resources,
typically those allocated in respective filesystem's init function.
Needed so those filesystems which went in via LKM have a chance to
clean after themselves before unloading. This fixes random panics
when LKM for filesystem using pools was loaded and unloaded several
times.
For each leaf filesystem, add appropriate vfs_done routine.
2000-03-16 18:08:17 +00:00
677d6a9962
add hashdone() - frees memory previously allocated via hashinit()
2000-03-16 17:19:53 +00:00
9eb76252d0
Regen.
2000-03-16 16:48:59 +00:00
8a8e062c16
cards for if_awi:
...
Add AirSurfer Pro
Change the name for AMD Am79C930. The same CIS strings are used
both for Melco WLI-PCM and NTT-EL SS Magic.
2000-03-16 16:38:41 +00:00
8bc084e1de
Kill more broken cf_unit bogons.
2000-03-16 16:37:20 +00:00
afaa5767a3
Match shutdown msg with that of cac.c.
2000-03-16 15:13:05 +00:00
534da504b9
Cosmetic change.
2000-03-16 15:09:59 +00:00
02905321b2
Foolish consistency. Mainly, always use underscores and sys/endian.h.
2000-03-16 15:09:34 +00:00
a81a812b50
Remove unneeded field in 'struct cac_ccb'.
2000-03-16 15:07:22 +00:00
ce0c2b1962
Attach cac* at pci?, ca* at cac?. Commented out where needs be.
2000-03-16 15:05:18 +00:00
d8bd9a762a
Make ca(4) useable as a block/boot device.
2000-03-16 14:53:29 +00:00
70063dc527
Driver for Compaq array controllers and disks (cac(4)/ca(4)).
2000-03-16 14:52:22 +00:00
415cbeb83f
This code has nothing to do with UCB.
2000-03-16 14:15:26 +00:00
6e0e3d609f
Replace LE() macro with le32toh()/le32toh().
2000-03-16 12:40:51 +00:00
1c78f3708b
Inititalize the fs variable struct a little earlier to avoid referencing
...
a bad pointer in a printf. Problem reported by Krister Walfridsson.
2000-03-16 10:37:00 +00:00
1a774a9979
Set bus_intr to ahc_pci_intr.
2000-03-16 10:34:33 +00:00
f44ddd61a9
Do bus-specific interrupt handling (i.e. ahc_pci_intr) via a bus_intr
...
field in the softc, instead of relying on NPCI > 0. This would
prevent things from compiling if PCI buses were in the config file,
but ahc was attached only to something else than the PCI bus.
2000-03-16 10:33:45 +00:00
f7f5e0a24c
Note that HX (PMAGB-B) has no support for small (less than 8 pixel width)
...
font. If attempted, kernel will explode.
2000-03-16 08:42:40 +00:00
f52c9620bc
Place 34 by 80 console at the center of screen.
2000-03-16 05:50:57 +00:00
0b765ee6f8
Retain rendering performance lossage by rasops, but suffering
...
flexibility in turn; this renderer is 2B stroke (less than 16 pixel
width) font only. If 1B stroke (less than 8 pixel width) font is
ever supported, the font data should be converted into 2B stroke
during font initialization process. 'wsfont_realize()' is to be
proposed in order to have 'CPU and/or accelerator hardware friendly'
format to squeeze maxinum performance.
2000-03-16 05:48:28 +00:00
8fa8b77325
Sync disklabel.5 with disklabel.h and dkio.h more closely.
2000-03-16 05:16:19 +00:00
172410a85d
s/alternate/alternative/ from rev. 1.5 of disklabel.5.
2000-03-16 04:58:35 +00:00
aa8b5ebd93
On initialization failure, free all the storage allocated to store
...
component pathnames rather than the last one.
2000-03-16 03:54:01 +00:00
5336e37153
Make this file just compiles again.
...
XXX Don't expect to work yet. It fails even to link depending on your
XXX kernel config file.
2000-03-16 03:06:51 +00:00
2ac45d6eef
Quiet down the DAD messages a little more.
2000-03-16 02:53:45 +00:00
3b51289caa
Revamp interrupts again:
...
Fix a bug causing interrmittent panics in interrupt dispatch.
Use interrupt vectors for softints.
Add a new send_softint interface.
Improved D$ flushing.
Improve traptrace and other debugging enhancements.
2000-03-16 02:36:56 +00:00
6190c3253f
add 'makeoptions CWARNFLAGS=""' to override CWARNFLAGS?= -Werror.
2000-03-16 01:45:51 +00:00
c99c03da4d
Make the USB event queue longer. Mine overflows before the (user-land)
...
event handler has started. But then I have about 25 devices connected. :)
2000-03-16 00:46:38 +00:00
1a9f0619fd
Fix thinko in the handling of FORCE_SHORT_XFER so that it actually
...
transfers a 0 length package instead on munging the whole transfer.
The aue driver works now.
2000-03-16 00:41:50 +00:00
f9fd27ea3c
Fix an uninitialized variable. From Krister Walfridsson <cato@df.lth.se>
2000-03-15 22:41:29 +00:00
499e5cba01
Fix some uninitialized variables. From Krister Walfridsson <cato@df.lth.se>
2000-03-15 22:40:30 +00:00
1634305526
Kill a couple of unnecessary cf_unit (ab)uses.
2000-03-15 20:40:00 +00:00
411a31adb2
- Go to splimp() when sending the rtsock message regarding link status.
...
- Would like to notify protocols if a link goes up or down, to e.g.
restart Duplicate Address Detection, etc. Add a comment to this
effect.
2000-03-15 20:34:43 +00:00
c38405d33d
Add power management support to the `tlp' driver. The battery on my
...
laptop lasts a whole lot longer now.
2000-03-15 18:39:50 +00:00
b4e10b0a4e
s/md/raid/ for RAIDframe major name.
2000-03-15 17:08:37 +00:00
36b9d60244
Add the RAIDframe device major to the machine-dependent config files
...
so that the right entries get added to dev_name2blk[]. Needed for / on RAID.
(Missed these yesterday.. Thanks to Izumi Tsutsui for noticing, and for
letting me know :) )
2000-03-15 16:57:12 +00:00
aa1de89bdf
explicitely #include <sys/systm.h> #if BUS_SPACE_DEBUG to get a printf()
...
prototype
2000-03-15 16:44:48 +00:00
e3dbad5a3c
Revert this back to 2 revisions ago, these checks are done higher up now.
2000-03-15 16:31:52 +00:00
14cbd3e2b0
In fdatasync, do not call bioops.io_fsync, since we're not flushing
...
metadata. If you do call it, there's actually a fair chance that it
will panic because its metadata dependencies were not cleared in
the VOP_FSYNC above (with FSYNC_DATAONLY).
2000-03-15 16:30:39 +00:00
01db605567
Do the previous slightly different: any files on MNT_SOFTDEP filesystems do
...
not want all their metadata dependencies flushed from vinvalbuf() if
there are no dirty blocks.
2000-03-15 16:28:45 +00:00
73797e6d2a
Stupid hack: run the apm kthread at 8*hz/7 intervals, not hz. Prevents
...
the load average from being 1.0 or higher constantly.
XXX really need a better way of calculating the load average.
2000-03-15 09:30:11 +00:00
fbc4dbb7ac
Catch up to rearranged aic7*.h files
2000-03-15 07:17:06 +00:00
220005d941
Eliminate unused sc_cookie field of struct ioasic_softc.
2000-03-15 03:07:44 +00:00
14620f1eee
PCI frontend for new ahc driver.
2000-03-15 02:33:52 +00:00
20b063e782
Add new files for common ahc EISA/VL code.
2000-03-15 02:10:41 +00:00
bacabba843
Add new files for common VL/EISA ahc code.
2000-03-15 02:10:09 +00:00
1e4647a15b
New ahc driver, a port of Justin Gibbs' FreeBSD driver. This adds
...
support for the U2W chips, and U160 controllers.
2000-03-15 02:08:28 +00:00
085f68836e
Common code for EISA and VL frontends for the ahc driver, split off
...
by Noriyuki Soda when updating for the new ahc driver.
2000-03-15 02:06:18 +00:00
bb8265c6be
Update ISA/VL frontend for new ahc driver (done by Noriyuki Soda).
2000-03-15 02:05:19 +00:00
7df6153163
Update EISA frontend for new ahc driver (done by Noriyuki Soda).
2000-03-15 02:04:43 +00:00
2da1f00fcd
Update cardbus frontend for new ahc driver.
2000-03-15 02:03:51 +00:00
46eb4f1451
Add SLIST.
2000-03-15 02:03:11 +00:00
d025f5705e
Add a couple of defines/aliases for messages.
2000-03-15 02:02:37 +00:00
b6f22443bb
Remove ancient code.
2000-03-15 00:38:40 +00:00
1e1f1f3b3b
Make sure the USB event thread discovers all devices first time it call
...
usb_discover().
It should now be possible to have the root NFS mounted over a USB Ethernet
adapter.
2000-03-14 23:13:12 +00:00
072f9f5b69
Some whitespace changes.
2000-03-14 22:37:55 +00:00
e8a33a63d1
Add port power management ioctls.
2000-03-14 21:24:54 +00:00
48ba774212
Fix RCS ID.
...
Add port power management.
2000-03-14 21:23:45 +00:00
797ac20035
Add power management hooks.
2000-03-14 21:20:51 +00:00
fa4417ef0c
Add enable/disable and power management hooks for serial ports.
...
Port states : always on / on when open (default) / always off
2000-03-14 21:18:27 +00:00
e2a9e82243
Add a descriptive comment to previous.
2000-03-14 19:16:03 +00:00
1bad2e1909
Add the RAIDframe device major to the machine-dependent config files
...
so that the right entries get added to dev_name2blk[]. Needed for / on RAID.
(Whoops! I missed checking these in when adding the RAID_AUTOCONFIG stuff.)
2000-03-14 15:56:51 +00:00
667929def5
KNF comment.
2000-03-14 14:11:06 +00:00
9ec86df3dd
Fix typo.
2000-03-14 14:10:08 +00:00
eb9d73ce81
Actually use KSEG1 offset for KSEG1 addresses in kvtophys().
...
From Jeff Smith and Ethan Solomita at Geocast.
2000-03-14 14:08:55 +00:00
563d336e44
Don't immediately return in ffs_fsync if there appears to be no data
...
to flush if it's a vnode on a softdep filesystem. softdep_sync_metadata
may still need to do some work.
2000-03-14 13:06:29 +00:00
60ed7cfb2b
Simplify the code a bit.
2000-03-14 10:26:10 +00:00
70b8e188ee
Don't think that a card is inserted if there is a card already in the slot.
...
Note that powerdown hook calls pccbbintr so that it detect card insertion or
removal during suspension.
2000-03-14 10:23:16 +00:00
d454505125
Cosmetic change.
2000-03-14 10:20:09 +00:00
0a00ace3f7
some buttuns map to key codes which the button mean.
2000-03-14 08:37:31 +00:00
6219354e8c
sync with fb->hpcfb, btnmgr changes.
2000-03-14 08:31:07 +00:00
16d7136b4c
change about debug print.
...
CVS
2000-03-14 08:26:42 +00:00
65da099cb1
Unnecessary to enclose device driver body with #if NASC > 0.
2000-03-14 08:23:29 +00:00
b76ec51696
- toggle CONFIG_HOOK_BUTTONEVENT_POWER event.
...
- change about debug print.
2000-03-14 08:23:24 +00:00
2eb68c00d2
Respect video console colour designation by configration file.
2000-03-14 08:04:06 +00:00
80c0893a8b
Switch to improved flexible video console text rasterizer provided by
...
rasops and wsfont.
2000-03-14 06:25:21 +00:00
8bf44847a8
Fix DEC3000/300 TC slot numbering. There is an address space hole
...
between two TC option cards and 3 builtin TC devices. Was uncovered by
mrg's change made at Nov 1999 and pointed by tsutsui.
2000-03-14 05:53:33 +00:00
6f5486c425
Switch to MI sfb (PMAGB-B) TC framebuffer driver which sports faster
...
text rendering assisted by SFB ASIC.
2000-03-14 05:34:04 +00:00
8de02d3a76
- Comment out cfb (PMAG-B) 1024x768 framebuffer.
...
- Have Gallant19 font by default.
2000-03-14 05:31:16 +00:00
ae493d8845
Resolve LP64 issues.
2000-03-14 04:23:14 +00:00
b3a2990ce5
Redo the previous commit; duplicated lines.
2000-03-14 02:55:04 +00:00
38ed3db66f
Synchronize with recent progress of GENERIC.
2000-03-14 02:53:04 +00:00
297455cbe2
Pick I/O before Memory space.
2000-03-14 02:08:21 +00:00
e58bd0c365
Regen
2000-03-14 01:46:56 +00:00
67027b1103
Add product ids for some VIA Technologies VT82C686A southbridge devices.
2000-03-14 01:45:11 +00:00
b3cf850817
Fix typos in comments.
2000-03-14 01:29:30 +00:00
735236ed02
Fix doubled 'the the' in comment.
2000-03-14 00:04:19 +00:00
95054da1a1
Fix doubled 'the's in comments.
2000-03-13 23:52:25 +00:00
49389b9817
tabbing consistency on the 3c1 entry
2000-03-13 23:36:02 +00:00
e2850da406
Regen.
2000-03-13 21:17:32 +00:00
ce56ba78b7
Make the inline asm conform to what gcc thinks they should look like (per
...
discussions in http://gcc.gnu.org/ml/gcc-patches/1998-11/msg00004.html )
Approved by fvdl.
2000-03-13 21:10:24 +00:00
5402c76d3e
add an entry to the product table for the 3C1. This seems to work,
...
at least as necessary to pull out the MAC address, etc. Not actually
tested xmit & rcv yet.
2000-03-13 20:32:28 +00:00
8409d84d62
regen
2000-03-13 20:31:23 +00:00
00a2570a2e
Add 3com Megahertz 3C1 10Mbps LAN CF+ Card
2000-03-13 20:30:24 +00:00
52b9123e1a
note lacking sysinst support
2000-03-13 19:00:28 +00:00
9616fd8002
no longer required.
2000-03-13 18:56:40 +00:00
70a3b602bd
add MOUNT_NTFS to CTL_VFS_NAMES macro
2000-03-13 18:52:06 +00:00
00363a82c8
sync with hpcfb.
2000-03-13 18:49:15 +00:00
f91ce51084
Regen.
2000-03-13 17:24:14 +00:00
e22c4b3d1f
Add a bunch of Compaq array controllers.
2000-03-13 17:23:26 +00:00
9f0c40cff1
Add Palm serial adapter.
2000-03-13 17:14:27 +00:00
97970bb544
Reduce memory disk size and remove some options.
2000-03-13 12:58:58 +00:00
8ba340d655
Do the same as biosboot does.
...
This makes it possible to create serial console dosboot.com's via uncommenting
the appropriate Makefile options.
I needed this when testing the SMP test kernels at work.
2000-03-13 10:51:22 +00:00
112137cd30
Added Artec/Ultima A6000C scanner to the quirks table (no LUNs).
2000-03-13 09:56:26 +00:00
c9af54bf14
Add SIOCGDRVSPEC to get driver specific parameters in addition to the
...
current definition of SIOCSDRVSPEC.
2000-03-13 05:56:47 +00:00
b27007be2c
Make dependall work.
2000-03-13 03:25:20 +00:00
54dab7a0d1
add BTN_COVER for MC-R520.
2000-03-13 01:57:06 +00:00
fd697ef8aa
add PWCTL_LCDLIGHT for MC-R300
2000-03-13 01:54:39 +00:00
f9dc1cca42
add CONFIG_HOOK_POWERCONTROL_LCDLIGHT
2000-03-13 01:52:00 +00:00
035f58c823
HPC/PsPC keyboard types.
2000-03-13 01:46:44 +00:00
a7f01b4816
Fix DMAADDR():
...
Return the mapped address of the block, not the kernel address.
A uhci device now finds devices on my pc164.
2000-03-12 23:10:29 +00:00
b8b53d87db
Avoid accessing the device if it is dying.
2000-03-12 21:57:50 +00:00
ce6f0100c1
Remove extra \n in attach message.
2000-03-12 19:16:48 +00:00
347a1f736e
Reverse the mapping of the control/status registers. Use I/O before MEM.
...
My card works now on a TI1220 chipset. Approved by Jason.
2000-03-12 17:05:23 +00:00
a57fa19957
change debug message.
2000-03-12 15:42:43 +00:00
44b86d33d6
recognize UCB1100 id.
2000-03-12 15:36:11 +00:00
ba8565be98
add WINCE_DEFAULT_SETTING and IT8368E_DESTRUCTIVE_CHECK for debug.
2000-03-12 15:35:29 +00:00
6c57f806b1
sync with btnmgr change.
2000-03-12 15:28:12 +00:00
dc7c050b3b
Add wsmux device which is real device in /dev.
2000-03-12 13:46:27 +00:00
b0650cbf17
Change btnmgr to wskbd device from pseudo device.
2000-03-12 12:08:16 +00:00
dcec402dc9
initialize rn with 0, just to be sure
2000-03-12 11:58:15 +00:00
2996ac1c02
Bivideo utilize platid mechanisum for probing.
2000-03-12 11:46:44 +00:00
e750135b5e
A few things:
...
* Initialize PCIC_INTR and PCIC_CSC_INTR on all chips, not just TI.
* Leave card detect interrupts enabled in PCIC_CSC_INTR. (This requires
reading PCIC_CSC in the interrupt handler on some chips, so do that too.)
* Leave PCIC_INTR_ENABLE set, as some chips require this to post card detect
interrupts while in PCMCIA mode.
* Leave PCIC_INTR_RESET (which is inverted) set at all times *except* when
powering up a socket, as some chips will use it to drive RESET# low even
while a CardBus card is in the slot.
This makes PCMCIA and CardBus cards works with some TI chips. Cross-checked
with a Toshiba ToPIC 95B.
2000-03-12 11:31:53 +00:00
30f73f1831
support bus probes a la "badaddr" and VME interrupts, fix error handling
...
after mapping problems
2000-03-12 11:23:06 +00:00
e135f943fa
add support for DMA mapping, bus probes ala "badaddr" and VME interrupts,
...
improve diagnostic output
2000-03-12 11:21:02 +00:00
c12028016f
Add makefile to install hpcfb.h.
2000-03-12 06:40:16 +00:00
f6ec059d2e
add newline at end of last line.
2000-03-12 05:35:37 +00:00
1203bdcbb3
Bus_space-ify TGA register accesses.
...
(raster operations are still using pointer-based access)
2000-03-12 05:32:29 +00:00
7560717e93
undo interface addition attempt if in6_ifinit() fails.
...
without it, :: will be kept if in6_ifinit() fails.
2000-03-12 05:23:07 +00:00
e9619d5d21
New frame buffer driver 'hpcfb' and built in video controller 'bivideo'
2000-03-12 05:04:44 +00:00
9f8cac1f16
undo interface address addition attempt, when in_ifinit fails.
...
(this basically avoids memory leakage)
2000-03-12 05:01:16 +00:00
058d87a788
Add a new frame buffer identifier for the hpcmips.
2000-03-12 04:59:24 +00:00
602faa83a8
Do *not* fiddle with the serial/parallel IRQ mode selection on TI chips.
...
Without extensive probing, we cannot possibly know that we're doing the right
thing.
Also some stylistic changes.
2000-03-12 04:34:29 +00:00
781b535703
Revert the previous change.
2000-03-12 04:27:12 +00:00
c7a13f6116
Revert the previous change. It does not match the commit message *and* was
...
incomplete (and probably quite broken).
2000-03-12 04:25:57 +00:00
31a775880b
lfs_truncate: handle synlinks with length > maxsymlink_len as regular files.
...
For symlinks > 60 chars we were bzero'ing part of (struct inode) past the
actual inode struct, corrupting memory following the current (struct inode)
resuling in a 'panic: pool_get(lfsinopl): free list modified' later.
This could also be the cause of random panics. With this fix LFS seems to be
useable for me now.
2000-03-12 01:45:01 +00:00
5c64f2064d
Add missing sc_pil_intr_enable member to pccbb_softc.
...
XXX Double check this, please. The code appears to only use it as a
boolean, but...
2000-03-12 01:15:04 +00:00
27fe6c0aee
regen
2000-03-11 16:13:39 +00:00
d01b78affd
Add id for Alliance AT25, as sent by Dave Sainty in kern/9596.
2000-03-11 16:13:14 +00:00
53cff1c1e5
fix typo.
2000-03-11 09:11:33 +00:00
531586bc96
fix frame buffer type (normalized to 'black on white').
2000-03-11 09:05:17 +00:00
a56d95d08b
fix PV-6000/C-1000 keycode mapping.
2000-03-11 08:53:33 +00:00
b7a1ee6c84
configure controller 0 only (workaround for phantom PCIC).
2000-03-11 08:51:55 +00:00
2d525b16dd
The shortened 1371 reset delay in revision 1.32 doesn't seem to be
...
quite enough for my 1373, so increase it some.
2000-03-11 06:42:37 +00:00
61fa9e1409
Move vinvalbuf's check for dirty blocks into ffs_fsync, to ensure that
...
mode and ownership bits are flushed to disk before the vnode is
reclaimed.
The check, introduced in the softdep merge, assumes that if no blocks
are dirty, no file data *or metadata* needs to be flushed to disk. This
is true of ffs, but is not true of lfs, and may not be true of other
filesystems.
Tested by myself and Bill Squier <groo@cs.stevens-tech.edu>.
2000-03-11 05:00:18 +00:00
0fcf68825f
Back out previous, and adjust a comment.
2000-03-10 22:39:03 +00:00
b58bf3c7bb
Don't reset cp->hw_ok ro 0 when cp isn't initialised in cy693_chip_map()
...
(used only in failure case). Pointed out by Wolfgang Solfrank.
While I'm here correct indentation.
2000-03-10 21:21:48 +00:00
dc259a36a2
Use CTRL_AST interrupt to handle asynchronous trap.
2000-03-10 19:06:43 +00:00
37132adf3f
Sync. with news68k/news68k/mem.c:1.2.
2000-03-10 16:28:56 +00:00
673e8e6fad
move IPPROTO_DONE to IPPROTO_xx group
2000-03-10 15:30:55 +00:00
8937ddef33
do not touch radix_node with RNF_ROOT on route_output(). this can
...
cause kernel panic (by non-root invocation of route(8)) on certain
routing table setup.
KAME PR: 217
2000-03-10 14:47:12 +00:00
fc34e21eac
Add an EILSEQ code (C99, first appeared in C90/AMD1), and update message
...
catalogs where possible.
2000-03-10 13:58:59 +00:00
173f823e3a
Only apply power on 3.3 V CardBus card (there are no 5 V CardBus card.)
2000-03-10 11:08:49 +00:00
06f85d40f0
change about VRIPDEBUG. no action changes.
2000-03-10 09:18:00 +00:00
67e7cb40b1
fix print message when #undef VRGIUDEBUG and change a little.
2000-03-10 09:05:01 +00:00
7e044bd4e5
Move pretty much all of the PCI configuration goo into a separate
...
function.
2000-03-10 07:26:41 +00:00
370bc1832b
Normalize the copyright notice (TNF copyrights should *always* match
...
the appropriate template), and run through indent.
2000-03-10 07:11:47 +00:00
0fef451485
Pull the code that take the Tulip out of powersave mode into a separate
...
function.
2000-03-10 06:55:09 +00:00
f76ce3b475
Only poll for bell completion if we're calling in from cnbell(). Fixes
...
a problem reported by Lennart Augustsson.
2000-03-10 06:10:34 +00:00
0a77d41f4f
clean up lm0 example
2000-03-10 06:03:18 +00:00
cf32e2713c
Adopt the macro name change of if_ieee80211.h.
...
also fixed the value for receiving packets in infrastructure mode,
while no one has been tested with.
2000-03-10 05:47:42 +00:00
85656424da
Rename the macro IEEE80211_FC1_RCVFROM_XXX to IEEE80211_FC1_DIR_XXX
...
and fix the value to be consistent with IEEE 802.11 spec.
The only customer of this macro is if_ray driver for now.
2000-03-10 05:44:23 +00:00
0391e3393f
Slight change to the SROM size printf.
2000-03-10 02:46:39 +00:00
4c043eb094
Arrange 'vmstat -i' to show 'optslotN'; for interrupt counts of TC slot N
...
as well as DECsystem 5100 optional serial card slot N.
2000-03-10 01:31:22 +00:00
79d83d72e1
printf -> DPRINTF
...
vrisa_debug = 0 by default.
2000-03-10 01:30:06 +00:00
01a5f6c995
Create new kernel thread to issue statfs(2) system call to check free
...
disk space rather than doing it in timeout handler. This fixes long
standing bug that accounting file can't be put on NFS file system (so,
e.g, we couldn't turn on accounting on diskless system).
2000-03-10 01:13:18 +00:00
9f86839658
change Mb/s to MB/s (Megabit to megabyte).
2000-03-09 23:19:26 +00:00
87bf486935
Back out previous; it's now dead code.
2000-03-09 23:15:23 +00:00
0aaf8765ad
Add reminder to add stuff to ALPHA as well as this.
2000-03-09 22:27:26 +00:00
d5f475149c
The last change has proven unreliable. Attack the problem differently;
...
assume that the address we have is the correct PA if we can't
figure it out by groveling. This time it really (yes, really)
works on the PowerBook 14x/16x/170.
2000-03-09 22:27:09 +00:00
fe76319160
Add ident and RAID_AUTOCONFIG to bring up to date with GENERIC.
2000-03-09 22:26:41 +00:00
402493dee5
change member name for icmp6_filter, to be conformant to RFC2292.
...
From: Francis Dupont
2000-03-09 21:26:16 +00:00
c70220f2a2
Move PCIIDE_CHANNEL_NAME macro to pciidereg.h.
2000-03-09 20:26:31 +00:00
0bcbafe0ee
Correct the number of arguments to wsdisplay_set_cons_kbd(), for the
...
changes I made for cnbell().
2000-03-09 18:59:27 +00:00
0542cec055
put "#ifdef __alpha__" around "alpha_mb()" calls
...
(I know the driver is useless without console initialisation, but it
should at least compile.)
2000-03-09 18:40:36 +00:00
f3f4e44c39
fix typo
2000-03-09 16:49:22 +00:00
5af90382c5
Add missing chrtoblktbl entry.
2000-03-09 11:19:30 +00:00
24ea2caf14
regen
2000-03-09 09:53:03 +00:00
3abb87c0f5
Add Conexant SoftK56 PCI Software Modem, Sony CXD3222 OHCI i.LINK(IEEE 1394)
...
PCI controller, Sony Memory Stick I/F Controller
Ids send by John Hawkinson in kern/9588
2000-03-09 09:50:49 +00:00
ea089cf90c
New features:
...
tctrl now initializes the state of the internal LCD icons. The icons
are unprogrammed at boot time. This incidentally makes the DC-POWER icon
work.
Fixes:
Fix my stupidity in the ENVSYS stuff, and actually follow the API.
2000-03-09 07:04:08 +00:00
7e567738f2
support rfact. use manufac. suggested resistor values by default
...
clean up some comments
2000-03-09 04:20:58 +00:00
7e6d7b8613
use bus independent probe
2000-03-09 04:19:03 +00:00
ed0b72db8f
Add rfact multiplication factor for DC voltage sources
...
Clean up formatting (fit in 80 columns)
2000-03-09 04:13:58 +00:00
752c98f8ea
Add (commented out) lm driver examples
2000-03-09 04:12:42 +00:00
ebe08edbb2
add VS400 scsi attachment + a few other things
2000-03-09 02:05:07 +00:00
57032be837
disable scsi for ka49 until sgmap is adapted to it.
2000-03-09 02:02:12 +00:00
082a04f053
don't enable sgmap on ka49 yet.
2000-03-08 23:50:51 +00:00
f21e750db2
only have vmapbuf/vunmapbuf do anything on the ka46/48/49.
2000-03-08 23:49:10 +00:00
5a9b9df419
Do the interrupt dispatch somewhat differently than the previous fix.
...
This one is more in the spirit of incorrect version which was trying
to shorten the interrupt path. This probably isn't quite as fast as
using a switch() statement to dispatch the interrupts, but should be
a little faster than testing for each of the possible 6 interrupt
conditions.
2000-03-08 18:09:27 +00:00
e0d3ede01c
Get the status right when a polled transfer times out.
2000-03-08 15:34:10 +00:00
07574c3239
Add a debug message.
2000-03-08 15:33:38 +00:00
45f32a77f5
Clean up code a little and add some more debug messages.
2000-03-08 15:33:24 +00:00
fe02fcfe1e
GENERIC configration includes Cassiopeia E-55 CF card support.
2000-03-08 14:53:33 +00:00
b1e34812e4
Fix obvious off-by-one error in db_output().
...
Fixes kern/9570 by John Hawkinson.
2000-03-08 08:31:33 +00:00
0641e677c4
Using interrupt bits in a switch statement doesn't work very well if more
...
than one interrupt bit is set (unless you do some fancy case values).
Check each interrupt bit individually and process the interrupt if set.
5000/200 doesn't hang shortly after booting now.
2000-03-07 23:41:35 +00:00
ad7dbd825c
Define ISO C99 (unsigned) long long (min, max) symbols.
2000-03-07 19:33:00 +00:00
0c7df56c40
Define ISO C99 (unsigned) long long (min, max) symbols.
...
VS: ----------------------------------------------------------------------
2000-03-07 19:31:50 +00:00
a9ebf7bb8c
Define ISO C99 (unsigned) long long (min, max) symbols.
2000-03-07 19:31:49 +00:00
af00b7b880
split probe into generic and bus specific
2000-03-07 18:39:14 +00:00
56423f59aa
Use b_cylinder as defined in sys/buf.h.
2000-03-07 15:59:24 +00:00
d16c6f3272
Use DISKPART/DISKMINOR/DISKUNIT instead of dkpart/dkminor/dkunit.
2000-03-07 15:55:14 +00:00
d9d840d522
- Remove unnecessary prototype declaration of readdisklabel().
...
- Use DISKPART/DISKMINOR/DISKUNIT instead of dkpart/dkminor/dkunit.
2000-03-07 15:35:42 +00:00
4398e0bd07
Fix CardBus device number. Though CardBus device number should be 0,
...
the value of bridge's function number was assigned to the device
number.
2000-03-07 09:36:52 +00:00
6755970bcf
Low-level drivers, like the Power Manager driver, can get us into a major
...
funk when they misbehave and give us unexpected results. Specifically:
- Don't assume that the first free slot is at the top of the table if
we can't find one.
- Don't increment ADBNumDevices when backfilling "holes" left by devices
that didn't respond to a TALK R3 during the initial device scan.
- Don't assume that an address reassignment worked; make sure something
responds on the new address before plowing forward.
- If after device reassignment there are no free slots, make sure to
indicate this fact.
- Failing all else, handle the situation where we run out of slots in
the device table -- which now should "never" happen -- gracefully.
While the Power Manager driver still sometimes misbehaves, it shouldn't
cause the system to crash/hang due to us walking off the end of the
device table.
2000-03-07 06:35:22 +00:00
d315d42657
Back out part of 1.104 which isn't actually needed.
2000-03-07 05:39:57 +00:00
5a212f7999
Fix a splx() botch or two.
2000-03-07 04:58:35 +00:00
5913106c36
add '%INCLUDES'.
2000-03-07 04:17:27 +00:00
c1b54794fc
Add missing `cnt++'.
2000-03-07 03:37:39 +00:00
7ce8a9f46b
Also, fix indentation in previous commit.
2000-03-07 03:34:52 +00:00
7c57ac56d7
Cleanup a couple of function declarations. No functional changes.
2000-03-07 03:09:47 +00:00
51ffb0924c
Create a new rf_close_component() to handle vnode operations for closing
...
components. Teach rf_UnconfigureVnodes() how to use it, and tell
the copyback and reconstruction code about it too.
2000-03-07 02:59:50 +00:00
ddebc1cad0
Move rf_UnconfigureVnodes to rf_netbsdkintf.c where it will be more at home.
...
Add prototype to rf_kintf.h, and nuke old prototypes from rf_disks.c and
rf_driver.c .
2000-03-07 02:28:05 +00:00
33a55d022b
rf_ protect the component label print routine, and make it more easily
...
available to the rest of RAIDframe.
2000-03-07 02:12:13 +00:00
dbf5d1f7a6
Nuke unused code.
2000-03-07 01:54:29 +00:00
dfaacf6eab
Fix bug in previous.
2000-03-07 01:08:55 +00:00
8f8714687b
Reenable the code that clears SLEEP and SNOOZE from the CFDA register.
2000-03-07 01:08:47 +00:00
6cc1408bca
Only print SROM size if TLP_DEBUG.
2000-03-07 01:06:12 +00:00
2f1aff2da3
Garbage collect MIPS_SR_INT_ENAB/MIPS_SR_INT_ENA_CUR definitions.
2000-03-07 01:05:48 +00:00
4887635a10
A few things:
...
* Take advantage of the tulip_read_srom() changes.
* Don't frob the so-called `CFDA' register. We're really looking for the
PMCSR, which is in a different location anyway.
* Don't panic if we detach an interface for which we never called tlp_attach().
2000-03-07 00:43:36 +00:00
5eee9ca94c
Determine the size of the SROM by probing the chip using the standard Microwire
...
protocol. Eliminates the need for srom_quirks and some other trash.
2000-03-07 00:39:17 +00:00
064b1bd2e9
Fix obvious typo.
2000-03-07 00:33:13 +00:00
8b13d21260
Do a CARDBUS_BM_ENABLE to be sure.
2000-03-07 00:32:52 +00:00
de8398315a
Fix an obvious bug that caused I/O space to never be freed.
...
Also, don't use rbus_space_free() directly.
2000-03-07 00:31:46 +00:00
bcdcb370e5
Called the power function even for 5V cards. This at least gives the power
...
a chance to stabilize before we frob the card.
2000-03-07 00:30:57 +00:00
ebbd936b2c
Chnage chip freq to 25MHZ. panic if dmaaddr is not in the kernel's
...
address space. fix some printfs. (reads now work!)
2000-03-07 00:08:42 +00:00
10f359a6b5
clear the sgmap that was allocated
2000-03-07 00:07:16 +00:00
e8c7c2f842
add real vmapbuf/vunmapbuf routines. needed for VS4000 SCSI support.
2000-03-07 00:05:59 +00:00
e42cc6e32e
remove some unsed variables. make a bit efficeint.
2000-03-07 00:04:13 +00:00
42144199a1
- Make the pcppi and pckbd drivers cooperate a little more -- pckbd provides
...
a call to hook up a bell-ringer (since the keyboard itself has no bell).
This eliminates the need for #ifdefs for the bell-ringer in the pckbd
driver.
- Add cnbell() support to pckbd.
2000-03-06 21:40:08 +00:00
da4dc67d3e
Add cnbell() support.
2000-03-06 21:37:16 +00:00
a183d34f04
- Implement cnbell() -- ring the console bell. The cn_bell entrypoint
...
is optional.
- Add cn_bell to statically allocated consdevs as appropriate.
2000-03-06 21:36:05 +00:00
57aae5ce02
On second thought, only set a default baudrate for "ethernet" if one
...
isn't set already.
2000-03-06 21:03:46 +00:00
91c44a72b8
Set ifp->if_baudrate as appropriate.
2000-03-06 21:02:37 +00:00
a6f861574a
No longer necessary to futz with ifp->if_baudrate here.
2000-03-06 21:02:00 +00:00
41aade98ba
Generate better error codes on bulk write.
2000-03-06 20:59:17 +00:00
119a2a3a80
Remove irrelevant comment.
2000-03-06 20:58:39 +00:00
e0cb11e30e
Use macros from usb.h instead masking out bit explicitely.
2000-03-06 20:58:18 +00:00
ad61d101be
Factor out the tick handling code into a common function, and send
...
rt_ifmsg's when the link speed or link status changes.
2000-03-06 20:56:56 +00:00
b99cf790df
- Initialize ifp->if_baudrate to a sensible value when the interface is
...
attached.
- Add ether_crc32_be() and ether_crc_le(), common functions for computing
the Ethernet CRC on arbitrary length buffers. Nothing uses them yet,
and these should be double-checked and probably re-implemented as
table-driven functions.
2000-03-06 20:54:41 +00:00
c2c2f491bc
Use the new macros in if.h for setting ifp->if_baudrate.
2000-03-06 20:52:12 +00:00
7e0978a583
Initialize ifp->if_baudrate to a sensible value when the interface is
...
attached. XXX Need to double-check this one.
2000-03-06 20:51:27 +00:00
877704d33e
Add ifmedia_baudrate(), which returns a value suitable for ifi_baudrate
...
given a media word, or 0 for unknown.
2000-03-06 20:50:29 +00:00
0f5c059d1f
- Add link status to if_data, so that routing daemons and other interested
...
parties can easily know the state of a link.
- Define an interface announcement message for the routing socket so that
routing daemons and other interested parties know when an interface
is attached/detached.
2000-03-06 20:49:00 +00:00
6a70fada85
allow SIOCDIFADDR with AF_UNSPEC address by default, until we fix ifconfig(8).
...
(should be COMPAT_43)
2000-03-06 19:33:13 +00:00
5d617390f9
Make pre-1.5 compatibility structures being defined conditional on _KERNEL
...
as well.
2000-03-06 18:55:10 +00:00
6ac3fc2a55
beautify APM_DISABLE_INTERRUPTS line (s/options\t/options \t/)
2000-03-06 18:45:42 +00:00
c34cce88c4
Add support for the AMD 756 DMA/UDMA IDE controller, provided in
...
PR kern/9536 by Dave Sainty.
2000-03-06 18:02:26 +00:00
5c2ef51018
Add '\Storage Card1\netbsd'.
2000-03-06 13:24:12 +00:00
erh