Define a config for the kernel on the boot-floppy. It should be resonably

small and boot on both TT and Falcon.

sys/arch/atari/conf/BOOT

@@ -0,0 +1,91 @@
+#
+#	$NetBSD: BOOT,v 1.1 1995/05/28 19:53:48 leo Exp $
+#
+# BOOT
+#
+# This configuration file is for a BOOT kernel. This kernel is supplied
+# on the boot-floppy and in the 'arch/atari/kernels' directory. It supports
+# both Falcons and TT's and should be small enough to allow installation
+# on 4Mb machines.
+#
+
+include "std.atari"
+#
+# Add support for about 16 users. This variable is used to size
+# various kernel structures.
+#
+maxusers	16
+
+#
+# processors this kernel should support
+#
+options		"M68030"	# support for 030
+
+options		TIMEZONE=300	# Set the timezone that the kernel will use
+options		DST=1		# Set the timezone that the kernel will use
+options		HZ=64		# Set the clock-rate (48/64/96)
+
+options		FPU_EMULATE	# Support for MC68881/MC68882 emulator
+#options	FPSP
+
+#
+# Networking options
+#
+options		INET		# Basic networking support
+
+options		FFS		# Berkeley fast file system
+options		MFS		# Memory based filesystem
+options		PROCFS		# Process filesystem
+options		KERNFS		# Kernel parameter filesystem
+options		NULLFS		# Loopback filesystem
+options		MSDOSFS		# MSDOS filesystem
+
+options		FIFO		# FIFO operations on vnodes
+
+options		SWAPPAGER	# Pager for swap device
+options		VNODEPAGER	# Pager for vnodes
+options		DEVPAGER	# Pager
+
+
+#
+# Misc. debuging options
+#
+options		PANICWAIT	# Require keystroke to dump/reboot
+options		DDB		# Kernel debugger
+
+#
+# Compatability options for various existing systems
+#
+options		"COMPAT_43"	# 4.3 BSD compatible system calls (required)
+
+#
+# Support for various kernel options
+#
+options		KTRACE			# Add kernel tracing system call
+options		DIAGNOSTIC		# Add additional error checking code
+options		"NKMEMCLUSTERS=256"	# Size of kernel malloc area
+options		GENERIC			# Mini-root boot support
+
+#
+# Atari specific kernel options:
+#
+options		"ST_POOL_SIZE=22"	# smallest that allows TT-HIGH
+
+#
+# Build one kernel that can boot from any disk.
+#
+config		netbsd swap on generic
+
+pseudo-device	view	2	# View (graphics mapping)
+pseudo-device	sl		# Slip
+pseudo-device	ppp		# ppp
+pseudo-device	pty	16	# Pseudo-tty support
+pseudo-device	loop		# Loopback network
+pseudo-device	vnd	3	# 3 pseudo disks (see vnconfig)
+
+#
+#The following sections describe various hardware options.
+#
+zs0	at mainbus0		# Serial support through 8530
+grf1	at grfbus0		# second graphics driver
+ite1	at grf1			# second tty