Use MI install script.

distrib/sparc/install.md

@@ -0,0 +1,175 @@
+#	$NetBSD: install.md,v 1.1 1996/01/06 22:42:13 pk Exp $
+#
+# Copyright (c) 1995 Jason R. Thorpe.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in the
+#    documentation and/or other materials provided with the distribution.
+# 3. All advertising materials mentioning features or use of this software
+#    must display the following acknowledgement:
+#	This product includes software developed for the NetBSD Project
+#	by Jason R. Thorpe.
+# 4. The name of the author may not be used to endorse or promote products
+#    derived from this software without specific prior written permission
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+
+#
+# machine dependent section of installation/upgrade script.
+#
+
+md_set_term() {
+	if [ ! -z "$TERM" ]; then
+		return
+	fi
+	echo -n "Specify terminal type [sun]: "
+	getresp "sun"
+	TERM="$resp"
+	export TERM
+}
+
+md_get_diskdevs() {
+	# return available disk devices
+	dmesg | egrep "(^sd[0-9] |^x[dy][0-9] )" | cut -d" " -f1 | sort -u
+}
+
+md_get_cddevs() {
+	# return available CDROM devices
+	dmesg | grep "^cd[0-9] " | cut -d" " -f1 | sort -u
+}
+
+md_get_ifdevs() {
+	# return available network devices
+	dmesg | egrep "(^le[0-9] |^ie[0-9] )" | cut -d" " -f1 | sort -u
+}
+
+md_installboot() {
+	echo "Installing boot block..."
+	/usr/mdec/binstall -v ffs /mnt
+}
+
+md_checkfordisklabel() {
+	# $1 is the disk to check
+
+	disklabel $1 > /dev/null 2> /tmp/checkfordisklabel
+	if grep "no disk label" /tmp/checkfordisklabel; then
+		rval="1"
+	elif grep "disk label corrupted" /tmp/checkfordisklabel; then
+		rval="2"
+	else
+		rval="0"
+	fi
+
+	rm -f /tmp/checkfordisklabel
+}
+
+md_prep_disklabel()
+{
+	# display example
+	cat << \__md_prep_disklabel_1
+Here is an example of what the partition information will look like once
+you have entered the disklabel editor. Disk partition sizes and offsets
+are in sector (most likely 512 bytes) units. Make sure these size/offset
+pairs are on cylinder boundaries (the number of sector per cylinder is
+given in the `sectors/cylinder' entry, which is not shown here).
+
+Do not change any parameters except the partition layout and the label name.
+It's probably also wisest not to touch the `8 partitions:' line, even
+in case you have defined less than eight partitions.
+
+[Example]
+8 partitions:
+#        size   offset    fstype   [fsize bsize   cpg]
+  a:    50176        0    4.2BSD     1024  8192    16   # (Cyl.    0 - 111)
+  b:    64512    50176      swap                        # (Cyl.  112 - 255)
+  c:   640192        0   unknown                        # (Cyl.    0 - 1428)
+  d:   525504   114688    4.2BSD     1024  8192    16   # (Cyl.  256 - 1428)
+[End of example]
+
+__md_prep_disklabel_1
+}
+
+md_welcome_banner() {
+{
+	if [ "$MODE" = "install" ]; then
+		echo ""
+		echo "Welcome to the NetBSD/sparc ${VERSION} installation program."
+		cat << \__welcome_banner_1
+
+This program is designed to help you put NetBSD on your disk,
+in a simple and rational way.  You'll be asked several questions,
+and it would probably be useful to have your disk's hardware
+manual, the installation notes, and a calculator handy.
+__welcome_banner_1
+
+	else
+		echo ""
+		echo "Welcome to the NetBSD/sparc ${VERSION} upgrade program."
+		cat << \__welcome_banner_2
+
+This program is designed to help you upgrade your NetBSD system in a
+simple and rational way.
+
+As a reminder, installing the `etc' binary set is NOT recommended.
+Once the rest of your system has been upgraded, you should manually
+merge any changes to files in the `etc' set into those files which
+already exist on your system.
+__welcome_banner_2
+	fi
+
+cat << \__welcome_banner_3
+
+As with anything which modifies your disk's contents, this
+program can cause SIGNIFICANT data loss, and you are advised
+to make sure your data is backed up before beginning the
+installation process.
+
+Default answers are displyed in brackets after the questions.
+You can hit Control-C at any time to quit, but if you do so at a
+prompt, you may have to hit return.  Also, quitting in the middle of
+installation may leave your system in an inconsistent state.
+
+__welcome_banner_3
+} | more
+}
+
+md_not_going_to_install() {
+	cat << \__not_going_to_install_1
+
+OK, then.  Enter `halt' at the prompt to halt the machine.  Once the
+machine has halted, power-cycle the system to load new boot code.
+
+__not_going_to_install_1
+}
+
+md_congrats() {
+	local what;
+	if [ "$MODE" = "install" ]; then
+		what="installed";
+	else
+		what="upgraded";
+	fi
+	cat << __congratulations_1
+
+CONGRATULATIONS!  You have successfully $what NetBSD!
+To boot the installed system, enter halt at the command prompt. Once the
+system has halted, reset the machine and boot from the disk.
+
+__congratulations_1
+}

distrib/sparc/miniroot/list

@@ -1,4 +1,4 @@
-#	$NetBSD: list,v 1.1 1995/12/18 22:54:44 pk Exp $
+#	$NetBSD: list,v 1.2 1996/01/06 22:42:17 pk Exp $
 
 # We can only get this program this way.
 COPY	${DESTDIR}/sbin/mount_mfs	sbin/mount_mfs
@@ -19,8 +19,6 @@ SYMLINK	/tmp/hosts			etc/hosts
 
 # and the installation tools
 COPY	${ARCHDIR}/dot.profile		.profile
-COPY	${ARCHDIR}/../install.sh	install
-COPY	${ARCHDIR}/../upgrade.sh	upgrade
-SPECIAL	chmod 755 install upgrade
+COPY	${ARCHDIR}/../install.md	install.md
 COPY	${DESTDIR}/usr/mdec/boot	boot
 SPECIAL sync; ${DESTDIR}/usr/mdec/binstall -v ffs ${TARGDIR}