NetBSD/distrib/utils/sysinst/msg.mi.en

/*	$NetBSD: msg.mi.en,v 1.126 2004/04/17 18:55:35 atatat Exp $	*/

/*
 * Copyright 1997 Piermont Information Systems Inc.
 * All rights reserved.
 *
 * Written by Philip A. Nelson for Piermont Information Systems Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed for the NetBSD Project by
 *      Piermont Information Systems Inc.
 * 4. The name of Piermont Information Systems Inc. may not be used to endorse
 *    or promote products derived from this software without specific prior
 *    written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY PIERMONT INFORMATION SYSTEMS INC. ``AS IS''
 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL PIERMONT INFORMATION SYSTEMS INC. BE
 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
 * THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

/* MI Message catalog -- english, machine independent */

message usage
{usage: sysinst [-r release] [-f definition-file]
}

message sysinst_message_language
{Installation messages in English}

message Yes {Yes}
message No {No}
message All {All}
message Some {Some}
message None {None}
message none {none}
message OK {OK}
message ok {ok}
message On {On}
message Off {Off}
message unchanged {unchanged}

message install
{install}

message reinstall
{reinstall sets for}

message upgrade
{upgrade}

message hello
{Welcome to sysinst, the NetBSD-@@VERSION@@ system installation tool.
This menu-driven tool is designed to help you install NetBSD to a hard
disk, or upgrade an existing NetBSD system, with a minimum of work. 
In the following menus type the reference letter (a, b, c, ...) to
select an item, or type CTRL+N/CTRL+P to select the next/previous item. 
The arrow keys and Page-up/Page-down may also work. 
Activate the current selection from the menu by typing the enter key.

}

message thanks
{Thank you for using NetBSD!

}

message installusure
{You have chosen to install NetBSD on your hard disk.  This will change
information on your hard disk.  You should have made a full backup
before this procedure!  This procedure will do the following things: 
	a) Partition your disk 
	b) Create new BSD file systems 
	c) Load and install distribution sets
	d) Some initial system configuraton

(After you enter the partition information but before your disk is
changed, you will have the opportunity to quit this procedure.)

Shall we continue?
}

message upgradeusure
{Ok, lets upgrade NetBSD on your hard disk.  As always, this will
change information on your hard disk.  You should have made a full backup
before this procedure!  Do you really want to upgrade NetBSD?
(This is your last warning before this procedure starts modifying your
disks.)
}

message reinstallusure
{Ok, lets unpack the NetBSD distribution sets to a bootable hard disk.
This procedure just fetches and unpacks sets onto an pre-partitioned
bootable disk. It does not label disks, upgrade bootblocks, or save
any existing configuration info.  (Quit and choose `install' or
`upgrade' if you want those options.)  You should have already done an
`install' or `upgrade' before starting this procedure!

Do you really want to reinstall NetBSD distribution sets?
(This is your last warning before this procedure starts modifying your
disks.)
}


message nodisk
{I can not find any hard disks for use by NetBSD.  You will be
returned to the original menu.
}

message onedisk
{I found only one disk, %s. 
Therefore I assume you want to %s NetBSD on it.
}

message ask_disk
{On which disk do you want to install NetBSD? }

message Available_disks
{Available disks}

message cylinders
{cylinders}

message heads
{heads}

message sectors
{sectors}

message fs_isize
{average file size (bytes)}

message mountpoint
{mount point (or 'none')}

message cylname
{cyl}

message secname
{sec}

message megname
{MB}

message layout
{NetBSD uses a BSD disklabel to carve up the NetBSD portion of the disk
into multiple BSD partitions.  You must now set up your BSD disklabel. 

You can use a simple editor to set the sizes of the NetBSD partitions,
or keep the existing partition sizes and contents. 

You will then be given the opportunity to change any of the disklabel
fields.

The NetBSD part of your disk is %d Megabytes.
A full installation requires at least %d Megabytes without X and
at least %d Megabytes if the X sets are included.
}

message sizechoice
{You have elected to specify partition sizes (either for the BSD
disklabel, or on some ports, for MBR slices). You must first choose a
size unit to use.  Choosing megabytes will give partition sizes close
to your choice, but aligned to cylinder boundaries. Choosing sectors
will allow you to more accurately specify the sizes.  On modern ZBR disks,
actual cylinder size varies across the disk and there is little real
gain from cylinder alignment. On older disks, it is most efficient to
choose partition sizes that are exact multiples of your actual
cylinder size.
}

message defaultunit
{Unless specified with 'M' (megabytes), 'G' (gigabytes), 'c' (cylinders)
or 's' sector at the end of input, sizes and offsets are in %s.
}

message ptnsizes
{You can now change the sizes for the system partitions.  The default is
to allocate all the space to the root filesystem, however you may wish
to have separate /usr (additional system files), /var (log files etc)
or /home (users' home directories).

Free space will be added to the partition marked with a '+'.
}

message ptnheaders
{
       MB         Cylinders   Sectors   Filesystem
}

message askfsmount
{Mount point?}

message askfssize
{Size for %s in %s?}

message askunits
{Change input units (sectors/cylinders/MB)}

message NetBSD_partition_cant_change
{NetBSD partition}

message Whole_disk_cant_change
{Whole disk}

message Boot_partition_cant_change
{Boot partition}

message add_another_ptn
{Add a user defined partition}

message fssizesok
{Accept partition sizes.  Free space %d %s, %d free partitions.}

message fssizesbad
{Reduce partition sizes by %d %s (%d sectors).}

message startoutsidedisk
{The start value you specified is beyond the end of the disk.
}

message endoutsidedisk
{With this value, the partition end is beyond the end of the disk.
Your partition size has been truncated to %d %s.

Type enter to continue
}

message fspart
{We now have your BSD-disklabel partitions as: 
This is your last chance to change them.

}

message fspart_header
{   Start %3s   End %3s  Size %3s FS type    Newfs Mount Mount point
   --------- --------- --------- ---------- ----- ----- -----------
}

message fspart_row
{%9d %9d %9d %-10s %-5s %-5s %s}

message show_all_unused_partitions
{Show all unused partitions}

message partition_sizes_ok
{Partition sizes ok}

message edfspart
{The current values for partition `%c' are, 
Select the field you wish to change:

                          MB cylinders   sectors
	             ------- --------- ---------
}

message fstype_fmt
{        FStype: %9s}

message start_fmt
{         start: %9u %8u%c %9u}

message size_fmt
{          size: %9u %8u%c %9u}

message end_fmt
{           end: %9u %8u%c %9u}

message bsize_fmt
{    block size: %9d bytes}

message fsize_fmt
{ fragment size: %9d bytes}

message isize_fmt
{ avg file size: %9d bytes (for number of inodes)}
message isize_fmt_dflt
{ avg file size:         4 fragments}

message newfs_fmt
{         newfs: %9s}

message mount_fmt
{         mount: %9s}

message mount_options_fmt
{ mount options: }

message mountpt_fmt
{   mount point: %9s}

message toggle
{Toggle}

message restore
{Restore original values}

message Select_the_type
{Select the type}

message other_types
{other types}

message label_size
{%s
Special values that can be entered for the size value:
    -1:   use until the end of the NetBSD part of the disk
   a-%c:   end this partition where partition X starts

size (%s)}

message label_offset
{%s
Special values that can be entered for the offset value:
    -1:   start at the beginning of the NetBSD part of the disk
   a-%c:   start at the end of previous partition (a, b, ..., %c)

start (%s)}

message invalid_sector_number
{Badly formed sector number
}

message Select_file_system_block_size
{Select file system block size}

message Select_file_system_fragment_size
{Select file system fragment size}

message packname
{Please enter a name for your NetBSD disk}

message lastchance
{Ok, we are now ready to install NetBSD on your hard disk (%s).  Nothing has been
written yet.  This is your last chance to quit this process before anything
gets changed.  

Shall we continue?
}

message disksetupdone
{Okay, the first part of the procedure is finished.  Sysinst has
written a disklabel to the target disk, and newfs'ed and fsck'ed
the new partitions you specified for the target disk.

The next step is to fetch and unpack the distribution filesets. 
Press <return> to proceed.
}

message disksetupdoneupdate
{Okay, the first part of the procedure is finished.  Sysinst has
written a disklabel to the target disk, and fsck'ed the new
partitions you specified for the target disk.

The next step is to fetch and unpack the distribution filesets. 
Press <return> to proceed.
}

message openfail
{Could not open %s, error message was: %s.
}

message statfail
{Can't get properties of %s, error message was: %s.
}

message unlink_fail
{I was unable to delete %s, error message was: %s.
}

message rename_fail
{I was unable to rename %s to %s, error message was: %s.
}

message deleting_files
{As part of the upgrade procedure, the following have to be deleted:
}

message deleting_dirs
{As part of the upgrade procedure, the following directories have to be
deleted (I will rename those that are not empty):
}

message renamed_dir
{The directory %s has been renamed to %s because it was not empty.
}

message cleanup_warn
{Cleanup of the existing install failed. This may cause the extraction
of the set to fail.
}

message nomount
{Partition %c's type is not 4.2BSD or msdos and therefore does not have
a mount point.}

message mountfail
{mount of device /dev/%s%c on %s failed.
}

message extractcomplete
{The extraction of the selected sets for NetBSD-@@VERSION@@ is complete.
The system is now able to boot from the selected harddisk. To complete
the installation, sysinst will give you the opportunity to configure
some essential things first.
}

message instcomplete
{The installation of NetBSD-@@VERSION@@ is now complete.  The system
should boot from hard disk.  Follow the instructions in the INSTALL
document about final configuration of your system.  The afterboot(8)
manpage is another recommended reading; it contains a list of things
to be checked after the first complete boot.

At a minimum, you should edit /etc/rc.conf to match your needs. See
/etc/defaults/rc.conf for the default values.
}

message upgrcomplete
{The upgrade to NetBSD-@@VERSION@@ is now complete.  You will
now need to follow the instructions in the INSTALL document as to
what you need to do to get your system reconfigured for your situation.
Remember to (re)read the afterboot(8) manpage as it may contain new
items since your last upgrade.  Your old /etc has been saved as /etc.old.

At a minimum, you must edit rc.conf for your local environment and change
rc_configured=NO to rc_configured=YES or reboots will stop at single-user,
and copy back the password files (taking into account new system accounts
that may have been created for this release) if you were using local
password files.
}


message unpackcomplete
{Unpacking additional release sets of NetBSD-@@VERSION@@ is now
complete.  Unpacking sets has clobbered the target /etc.  Any /etc.old
saved by an earlier upgrade was not touched.  You will now need to
follow the instructions in the INSTALL document to get your system
reconfigured for your situation.  The afterboot(8) manpage can also be
of some help.

At a minimum, you must edit rc.conf for your local environment and change
rc_configured=NO to rc_configured=YES or reboots will stop at single-user.
}

message distmedium
{Your disk is now ready for installing the kernel and the distribution
sets.  As noted in your INSTALL notes, you have several options.  For
ftp or nfs, you must be connected to a network with access to the proper
machines.  If you are not ready to complete the installation at this time,
you may select "none" and you will be returned to the main menu.  When
you are ready at a later time, you may select "upgrade" from the main
menu to complete the installation.
}

message distset
{The NetBSD distribution is broken into a collection of distribution
sets.  There are some basic sets that are needed by all installations
and there are some other sets that are not needed by all installations.
You may choose to install all of them (Full installation) or you
select from the optional distribution sets.
}

message ftpsource
{The following is the ftp site, directory, user, and password currently
ready to use.  If "user" is "ftp", then the password is not needed.

host:		%s 
directory:	%s 
user:		%s 
password:	%s 
proxy:		%s 
}

message host
{host}

message dir
{directory}

message user
{user}

message passwd
{password}

message proxy
{proxy}

message email
{e-mail address}

message dev
{device}

message nfssource
{Enter the nfs host and server directory where the distribution is located. 
Remember, the directory should contain the .tgz files and
must be nfs mountable.

host:		%s 
directory:	%s 
}

message nfsbadmount
{The directory %s:%s could not be nfs mounted.}

message cdromsource
{Enter the CDROM device to be used and directory on the CDROM where
the distribution is located. 
Remember, the directory should contain the .tgz files.

device:		%s 
directory:	%s
}

message localfssource
{Enter the unmounted local device and directory on that device where
the distribution is located. 
Remember, the directory should contain the .tgz files.

device:		%s 
file system:	%s 
directory:	%s
}

message localdir
{Enter the already-mounted local directory where the distribution is located. 
Remember, the directory should contain the .tgz files.

directory:	%s
}

message filesys
{file system}

message cdrombadmount
{The CDROM could not be mounted on device %s.}

message localfsbadmount
{%s could not be mounted on local device %s.}

message badlocalsetdir
{%s is not a directory}

message badsetdir
{%s does not contain the mandatory installation sets etc.tgz 
and base.tgz.  Are you sure you've got the right directory?}

message nonet
{I can not find any network interfaces for use by NetBSD.  You will be
returned to the previous menu.
}

message netup
{The following network interfaces are active: %s
Does one of them connect to the required server?}

message asknetdev
{I have found the following network interfaces: %s
\nWhich device shall I use?}

message badnet
{You did not choose one of the listed network devices.  Please try again.
The following network devices are available: %s
\nWhich device shall I use?}

message netinfo
{To be able to use the network, we need answers to the following:

}

message net_domain
{Your DNS domain}

message net_host
{Your host name}

message net_ip
{Your IPv4 number}

message net_mask
{IPv4 Netmask}

message net_namesrv6
{IPv6 name server}

message net_namesrv
{IPv4 name server}

message net_defroute
{IPv4 gateway}

message net_media
{Network media type}

message netok
{The following are the values you entered.  Are they OK?

DNS Domain:		%s 
Host Name:		%s 
Primary Interface:	%s 
Host IP:		%s 
Netmask:		%s 
IPv4 Nameserver:	%s 
IPv4 Gateway:		%s 
Media type:		%s 
}

message netokv6
{IPv6 autoconf:		%s 
IPv6 Nameserver:	%s 
}

message netagain
{Please reenter the information about your network.  Your last answers
will be your default.

}

message wait_network
{
Waiting while network interface comes up.
}

message resolv
{Could not create /etc/resolv.conf.  Install aborted.
}

message realdir
{Could not change to directory %s: %s.  Install aborted.
}

message ftperror_cont
{Ftp detected an error.  Press <return> to continue.}

message ftperror
{Ftp could not retrieve a file.  Do you want to try again?}

message distdir
{What directory shall I use for %s? }

message delete_dist_files
{Do you want to delete the NetBSD sets from %s?
(You can keep them to install/upgrade a second system.)}

message verboseextract
{During the extraction process, what do you want to see as
each file is extracted?
}

message notarfile
{Release set %s does not exist.

Continue extracting sets?}

message endtarok
{All selected distribution sets unpacked successfully.}

message endtar
{There were problems unpacking distribution sets.
Your installation is incomplete.

You selected %d distribution sets.  %d sets couldn't be found
and %d were skipped after an error occurred.  Of the %d
that were attempted, %d unpacked without errors and %d with errors.

The installation is aborted. Please recheck your distribution source
and consider reinstalling sets from the main menu.}

message abort
{Your choices have made it impossible to install NetBSD.  Install aborted.
}

message abortinst
{The distribution was not successfully loaded.  You will need to proceed
by hand.  Installation aborted.
}

message abortupgr
{The distribution was not successfully loaded.  You will need to proceed
by hand.  Upgrade aborted.
}

message abortunpack
{Unpacking additional sets was not successful.  You will need to
proceed by hand, or choose a different source for release sets and try
again.
}

message createfstab
{There is a big problem!  Can not create /mnt/etc/fstab.  Bailing out!
}


message noetcfstab
{Help! No /etc/fstab in target disk %s.  Aborting upgrade.
}

message badetcfstab
{Help! Can't parse /etc/fstab in target disk %s.  Aborting upgrade.
}

message etc_oldexists
{I cannot save /etc as /etc.old, because the target disk already has an
/etc.old. Please fix this before continuing.

One way is to start a shell from the Utilities menu, examine the
target /etc and /etc.old.  If /etc.old is from a completed upgrade,
you can rm -f etc.old and restart.  Or if /etc.old is from a recent,
incomplete upgrade, you can rm -f /etc and mv etc.old to /etc.

Aborting upgrade.}

message X_oldexists
{I cannot save /usr/X11R6/bin/X as /usr/X11R6/bin/X.old, because the
target disk already has an /usr/X11R6/bin/X.old. Please fix this before
continuing.

One way is to start a shell from the Utilities menu, examine the
target /usr/X11R6/bin/X and /usr/X11R6/bin/X.old.  If
/usr/X11R6/bin/X.old is from a completed upgrade, you can rm -f
/usr/X11R6/bin/X.old and restart.  Or if /usr/X11R6/bin/X.old is from
a recent, incomplete upgrade, you can rm -f /usr/X11R6/bin/X and mv
/usr/X11R6/bin/X.old to /usr/X11R6/bin/X.

Aborting upgrade.}

message netnotup
{There was a problem in setting up the network.  Either your gateway
or your nameserver was not reachable by a ping.  Do you want to
configure your network again?  (No allows you to continue anyway
or abort the install process.)
}

message netnotup_continueanyway
{Would you like to continue the install process anyway, and assume
that the network is working?  (No aborts the install process.)
}

message makedev
{Making device nodes ...
}

message badfs
{It appears that /dev/%s%c is not a BSD file system or the fsck was
not successful.  The upgrade has been aborted.  (Error number %d.)
}

message badmount
{Your file system /dev/%s%c was not successfully mounted.  Upgrade aborted.}

message rootmissing
{ target root is missing %s.
}

message badroot
{The completed new root fileystem failed a basic sanity check.
 Are you sure you installed all the required sets?
}

message fddev
{What floppy device do you want to use? }

message fdmount
{Please load the floppy containing the file named "%s". }

message fdnotfound
{Could not find the file named "%s" on the disk.  Please load the
floppy with that file on it.

If this was the last set's disk, hit "Set finished" to continue on
the next set, if any.}

message fdremount
{The floppy was not mounted successfully.  You may:

Try again and put in the floppy containing the file named "%s".

Not load any more files from this set and continue on the next one, if any.

Not load any more files from floppy and abort the process.
}

message mntnetconfig
{Is the network information you entered accurate for this machine
in regular operation and do you want it installed in /etc? }

message cur_distsets
{The following is the list of distribution sets that will be used.

}

message cur_distsets_header
{   Distribution set         Selected
   ------------------------ --------
}

message set_base
{Base}

message set_system
{System (/etc)}

message set_compiler
{Compiler Tools}

message set_games
{Games}

message set_man_pages
{Online Manual Pages}

message set_misc
{Miscellaneous}

message set_text_tools
{Text Processing Tools}

message set_X11
{X11 sets}

message set_X11_base
{X11 base and clients}

message set_X11_etc
{X11 configuration}

message set_X11_fonts
{X11 fonts}

message set_X11_servers
{X11 servers}

message set_X_contrib
{X contrib clients}

message set_X11_prog
{X11 programming}

message set_X11_misc
{X11 Misc.}

message cur_distsets_row
{%-27s %3s\n}

message select_all
{Select all the above sets}

message select_none
{Deselect all the above sets}

message install_selected_sets
{Install selected sets}

message tarerror
{There was an error in extracting the file %s.  That means
some files were not extracted correctly and your system will not be
complete.

Continue extracting sets?}

message must_be_one_root
{There must be a single partition marked to be mounted on '/'.}

message partitions_overlap
{partitions %c and %c overlap.}

message edit_partitions_again
{

You can either edit the partition table by hand, or give up and return
to the main menu.

Edit the partition table again?}

message not_regular_file
{Config file %s is not a regular file.\n}

message out_of_memory
{Out of memory (malloc failed).\n}

message config_open_error
{Could not open config file %s\n}

message config_read_error
{Could not read config file %s\n}

message cmdfail
{Command
	%s
failed. I can't continue.}

message upgradeparttype
{The only suitable partition that was found for NetBSD installation is of
the old NetBSD/386BSD/FreeBSD partition type. Do you want to change the type
of this partition to the new NetBSD-only partition type?}

message choose_timezone
{Please choose the timezone that fits you best from the list below.
Press RETURN to select an entry. 
Press 'x' followed by RETURN to quit the timezone selection. 

 Default:	%s 
 Selected:	%s 
 Local time: 	%s %s 
}

message tz_back
{ Back to main timezone list}

message choose_crypt
{Please choose the password cipher to use. NetBSD can be configured to use
either the DES, MD5 or Blowfish schemes.

The traditional DES scheme is compatible with most other Unix-like operating
systems, but only the first 8 characters of any password will be recognised.
The MD5 and Blowfish scheme allows for longer passwords, and some would
argue that it's more secure.

If you have a network and intend to use NIS, please bear in mind the
capabilities of other machines on your network.

If you are upgrading and would like to keep configuration unchanged,
choose the last option "do not change".
}

message swapactive
{The disk that you selected has a swap partition that may currently be
in use if your system is low on memory. Because you are going to
repartition this disk, this swap partition will be disabled now. Please
beware that this might lead to out of swap errors. Should you get such
an error, please restart the system and try again.}

message swapdelfailed
{Sysinst failed to deactivate the swap partition on the disk that you
chose for installation. Please reboot and try again.}

message rootpw
{The root password of the newly installed system has not yet been initialized,
and is thus empty.  Do you want to set a root password for the system now?}

message rootsh
{You can now select which shell to use for the root user. The default is
/bin/csh, but you may prefer another one.}

message postuseexisting
{
Don't forget to check the file system mount points for each of the
file systems that are to be mounted.  Press <return> to continue.
}

message no_root_fs
{
There is no defined root file system.  You need to define at least
one mount point with "/".

Press <return> to continue.
}

message Pick_an_option {Pick an option to turn on or off.}
message Scripting {Scripting}
message Logging {Logging}

message Status  { Status: }
message Command {Command: }
message Running {Running}
message Finished {Finished}
message Command_failed {Command failed}
message Command_ended_on_signal {Command ended on signal}

message NetBSD_VERSION_Install_System {NetBSD-@@VERSION@@ Install System}
message Exit_Install_System {Exit Install System}
message Install_NetBSD_to_hard_disk {Install NetBSD to hard disk}
message Upgrade_NetBSD_on_a_hard_disk {Upgrade NetBSD on a hard disk}
message Re_install_sets_or_install_additional_sets {Re-install sets or install additional sets}
message Reboot_the_computer {Reboot the computer}
message Utility_menu {Utility menu}
message NetBSD_VERSION_Utilities {NetBSD-@@VERSION@@ Utilities}
message Run_bin_sh {Run /bin/sh}
message Set_timezone {Set timezone}
message Configure_network {Configure network}
message Partition_a_disk {Partition a disk}
message Logging_functions {Logging functions}
message Halt_the_system {Halt the system}
message yes_or_no {yes or no?}
message Hit_enter_to_continue {Hit enter to continue}
message Choose_your_installation {Choose your installation}
message Set_Sizes {Set sizes of NetBSD partitions}
message Use_Existing {Use existing partition sizes}
message Choose_your_size_specifier {Choose your size specifier}
message Megabytes {Megabytes}
message Cylinders {Cylinders}
message Sectors {Sectors}
message Select_medium {Select medium}
message ftp {ftp}
message nfs {nfs}
message cdrom {cdrom}
message floppy {floppy}
message local_fs {unmounted fs}
message local_dir {local directory}
message Select_your_distribution {Select your distribution}
message Full_installation {Full installation}
message Custom_installation {Custom installation}
message Change {Change}
message hidden {** hidden **}
message Host {Host}
message Directory {Directory}
message User {User}
message Password {Password}
message Proxy {Proxy}
message Get_Distribution {Get Distribution}
message Continue {Continue}
message What_do_you_want_to_do {What do you want to do?}
message Try_again {Try again}
message Give_up {Give up}
message Ignore_continue_anyway {Ignore, continue anyway}
message Set_finished {Set finished}
message Abort_install {Abort install}
message Password_cipher {Password cipher}
message DES {DES}
message MD5 {MD5}
message Blowfish_2_7_round {Blowfish 2^7 round}
message do_not_change {do not change}
message Device {Device}
message File_system {File system}
message Change_directory_path {Change directory path}
message Select_IPv6_DNS_server {  Select IPv6 DNS server}
message other {other }
message Perform_IPv6_autoconfiguration {Perform IPv6 autoconfiguration?}
message Perform_DHCP_autoconfiguration {Perform DHCP autoconfiguration?}
message Root_shell {Root shell}
message Select_set_extraction_verbosity {Select set extraction verbosity}
message Progress_bar_recommended {Progress bar (recommended)}
message Silent {Silent}
message Verbose_file_name_listing_slow {Verbose file name listing (slow)}

.if AOUT2ELF
message aoutfail
{The directory where the old a.out shared libraries should be moved to could
not be created. Please try the upgrade procedure again and make sure you
have mounted all file systems.}

message emulbackup
{Either the /emul/aout or /emul directory on your system was a symbolic link
pointing to an unmounted file system. It has been given a '.old' extension.
Once you bring your upgraded system back up, you may need to take care
of merging the newly created /emul/aout directory with the old one.
}
.endif