NetBSD/usr.bin/mail/mime_decode.c

1174 lines
30 KiB
C
Raw Normal View History

2009-01-18 04:29:57 +03:00
/* $NetBSD: mime_decode.c,v 1.14 2009/01/18 01:29:57 lukem Exp $ */
/*-
* Copyright (c) 2006 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Anon Ymous.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifdef MIME_SUPPORT
#include <sys/cdefs.h>
#ifndef __lint__
2009-01-18 04:29:57 +03:00
__RCSID("$NetBSD: mime_decode.c,v 1.14 2009/01/18 01:29:57 lukem Exp $");
#endif /* not __lint__ */
#include <assert.h>
#include <err.h>
#include <fcntl.h>
#include <libgen.h>
#include <setjmp.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <unistd.h>
#include <iconv.h>
#include "def.h"
#include "extern.h"
#ifdef USE_EDITLINE
#include "complete.h"
#endif
#ifdef MIME_SUPPORT
#include "mime.h"
#include "mime_child.h"
#include "mime_codecs.h"
#include "mime_header.h"
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#include "mime_detach.h"
#endif
#include "glob.h"
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#include "thread.h"
#if 0
#ifndef __lint__
/*
* XXX - This block for debugging only and eventually should go away.
*/
static void
show_one_mime_info(FILE *fp, struct mime_info *mip)
{
#define XX(a) (a) ? (a) : "<null>"
(void)fprintf(fp, ">> --------\n");
(void)fprintf(fp, "mip %d:\n", mip->mi_partnum);
(void)fprintf(fp, "** Version: %s\n", XX(mip->mi_version));
(void)fprintf(fp, "** type: %s\n", XX(mip->mi_type));
(void)fprintf(fp, "** subtype: %s\n", XX(mip->mi_subtype));
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
(void)fprintf(fp, "** boundary: %s\n", XX(mip->mi_boundary));
(void)fprintf(fp, "** charset: %s\n", XX(mip->mi_charset));
(void)fprintf(fp, "** encoding: %s\n", XX(mip->mi_encoding));
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
(void)fprintf(fp, "** disposition: %s\n", XX(mip->mi_disposition));
(void)fprintf(fp, "** filename: %s\n", XX(mip->mi_filename));
(void)fprintf(fp, "** %p: flag: 0x%x, block: %ld, offset: %d, size: %lld, lines: %ld:%ld\n",
mip->mp,
mip->mp->m_flag,
mip->mp->m_block, mip->mp->m_offset, mip->mp->m_size,
mip->mp->m_lines, mip->mp->m_blines);
(void)fprintf(fp, "** mip: %p\n", mip);
(void)fprintf(fp, "** mi_flink: %p\n", mip->mi_flink);
(void)fprintf(fp, "** mi_blink: %p\n", mip->mi_blink);
(void)fprintf(fp, "** mip %p, mp %p, parent_mip %p, parent_mp %p\n",
mip, mip->mp, mip->mi_parent.mip, mip->mi_parent.mp);
(void)fprintf(fp, "** mi_fo %p, mi_head_end %p, mi_pipe_end %p\n",
mip->mi_fo, mip->mi_head_end, mip->mi_pipe_end);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
(void)fprintf(fp, "** mi_ignore_body: %d\n", mip->mi_ignore_body);
(void)fprintf(fp, "** mi_partnum: %d\n", mip->mi_partnum);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
(void)fprintf(fp, "** mi_partstr: %s\n", mip->mi_partstr);
(void)fprintf(fp, "** mi_msgstr: %s\n", mip->mi_msgstr);
(void)fflush(fp);
#undef XX
}
__unused
static void
show_mime_info(FILE *fp, struct mime_info *mip, struct mime_info *end_mip)
{
for (/* EMTPY */; mip != end_mip; mip = mip->mi_flink)
show_one_mime_info(fp, mip);
(void)fprintf(fp, "++ =========\n");
(void)fflush(fp);
}
#endif /* __lint__ */
#endif /* #if */
/*
* Our interface to the file registry in popen.c
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC FILE *
pipe_end(struct mime_info *mip)
{
FILE *fp;
fp = last_registered_file(0); /* get last registered file or pipe */
if (fp == NULL)
fp = mip->mi_fo;
return fp;
}
/*
* Copy the first ';' delimited substring from 'src' (null terminated)
* into 'dst', expanding quotes and removing comments (as per RFC
* 822). Returns a pointer in src to the next non-white character
* following ';'. The caller is responsible for ensuring 'dst' is
* sufficiently large to hold the result.
*/
static char *
get_param(char *dst, char *src)
{
char *lastq;
char *cp;
char *cp2;
int nesting;
cp2 = dst;
lastq = dst;
for (cp = src; *cp && *cp != ';'; cp++) {
switch (*cp) {
case '"': /* start of quoted string */
for (cp++; *cp; cp++) {
if (*cp == '"')
break;
if (*cp == '\\' && cp[1] != '\0')
++cp;
*cp2++ = *cp;
}
lastq = cp2-1;
break;
case '(': /* start of comment */
nesting = 1;
while (nesting > 0 && *++cp) {
if (*cp == '\\' && cp[1] != '\0')
cp++;
if (*cp == '(')
nesting++;
if (*cp == ')')
nesting--;
}
break;
default:
*cp2++ = *cp;
break;
}
}
/* remove trailing white space */
while (cp2 > lastq && is_WSP(cp2[-1]))
cp2--;
*cp2 = '\0';
if (*cp == ';')
cp++;
cp = skip_WSP(cp);
return cp;
}
/*
* Content parameter
* if field is NULL, return the content "specifier".
*/
static char*
cparam(const char field[], char *src, int downcase)
{
char *cp;
char *dst;
if (src == NULL)
return NULL;
dst = salloc(strlen(src) + 1); /* large enough for any param in src */
cp = skip_WSP(src);
cp = get_param(dst, cp);
if (field == NULL)
return dst;
while (*cp != '\0') {
size_t len = strlen(field);
cp = get_param(dst, cp);
if (strncasecmp(dst, field, len) == 0 && dst[len] == '=') {
char *cp2;
cp2 = dst + len + 1;
if (downcase)
istrcpy(cp2, cp2);
return cp2;
}
}
return NULL;
}
static void
get_content(struct mime_info *mip)
{
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
char *mime_disposition_field;
char *mime_type_field;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
char *filename;
struct message *mp;
char *cp;
mp = mip->mp;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
mip->mi_version = cparam(NULL, hfield(MIME_HDR_VERSION, mp), 0);
mip->mi_encoding = cparam(NULL, hfield(MIME_HDR_ENCODING, mp), 1);
mime_type_field = hfield(MIME_HDR_TYPE, mp);
mip->mi_type = cparam(NULL, mime_type_field, 1);
if (mip->mi_type) {
cp = strchr(mip->mi_type, '/');
if (cp)
*cp++ = '\0';
mip->mi_subtype = cp;
}
mip->mi_boundary = cparam("boundary", mime_type_field, 0);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
mip->mi_charset = cparam("charset", mime_type_field, 1);
mime_disposition_field = hfield(MIME_HDR_DISPOSITION, mp);
mip->mi_disposition = cparam(NULL, mime_disposition_field, 1);
/*
* The type field typically has a "name" parameter for "image"
* and "video" types, and I assume for other types as well.
* We grab it, but override it if the disposition field has a
* filename parameter as it often does for "attachments".
* More careful analysis could be done, but this seems to work
* pretty well.
*/
filename = cparam("name", mime_type_field, 0);
if ((cp = cparam("filename", mime_disposition_field, 0)) != NULL)
filename = cp;
if (filename) {
filename = basename(filename); /* avoid absolute pathnames */
filename = savestr(filename); /* save it! */
}
mip->mi_filename = filename;
}
static struct message *
salloc_message(int flag, long block, short offset)
{
struct message *mp;
/* use csalloc in case someone adds a field someday! */
mp = csalloc(1, sizeof(*mp));
mp->m_flag = flag;
mp->m_block = block;
mp->m_offset = offset;
#if 0
mp->m_lines = 0;
mp->m_size = 0;
mp->m_blines = 0;
#endif
return mp;
}
static struct mime_info *
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
insert_new_mip(struct mime_info *this_mip, struct mime_info *top_mip,
struct message *top_mp, off_t end_pos, int partnum)
{
struct mime_info *new_mip;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
new_mip = csalloc(1, sizeof(*new_mip));
new_mip->mi_blink = this_mip;
new_mip->mi_flink = this_mip->mi_flink;
this_mip->mi_flink = new_mip;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
new_mip->mp = salloc_message(this_mip->mp->m_flag,
(long)blockof(end_pos), blkoffsetof(end_pos));
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
new_mip->mi_parent.mip = top_mip;
new_mip->mi_parent.mp = top_mp;
new_mip->mi_partnum = partnum;
return new_mip;
}
static void
split_multipart(struct mime_info *top_mip)
{
FILE *fp;
struct message *top_mp;
struct message *this_mp;
struct mime_info *this_mip;
off_t beg_pos;
const char *boundary;
size_t boundary_len;
long lines_left; /* must be signed and same size as m_lines */
int partnum;
int in_header;
top_mp = top_mip->mp;
this_mp = salloc_message(top_mp->m_flag, top_mp->m_block, top_mp->m_offset);
this_mip = top_mip;
this_mip->mp = this_mp;
partnum = 1;
/* top_mip->mi_partnum = partnum++; */ /* Keep the number set by the caller */
in_header = 1;
boundary = top_mip->mi_boundary;
boundary_len = boundary ? strlen(boundary) : 0;
fp = setinput(top_mp);
beg_pos = ftello(fp);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#if 0
warnx("beg_pos: %lld, m_lines: %ld, m_blines: %ld",
beg_pos, top_mp->m_lines, top_mp->m_blines);
#endif
for (lines_left = top_mp->m_lines - 1; lines_left >= 0; lines_left--) {
char *line;
size_t line_len;
line = fgetln(fp, &line_len);
this_mp->m_lines++; /* count the message lines */
if (!in_header)
this_mp->m_blines++; /* count the body lines */
if (lines_left == 0 || (
!in_header &&
line_len >= boundary_len + 2 &&
line[0] == '-' && line[1] == '-' &&
strncmp(line + 2, boundary, boundary_len) == 0)) {
off_t cur_pos;
off_t end_pos;
cur_pos = ftello(fp);
/* the boundary belongs to the next part */
end_pos = cur_pos - line_len;
this_mp->m_lines -= 1;
this_mp->m_blines -= 1;
this_mp->m_size = end_pos - beg_pos;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#if 0
warnx("end_pos: %lld, m_lines: %ld, m_blines: %ld",
end_pos, this_mp->m_lines, this_mp->m_blines);
#endif
if (line[boundary_len + 2] == '-' &&
line[boundary_len + 3] == '-') {/* end of multipart */
/* do a sanity check on the EOM */
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (lines_left != 1) {
/*
* XXX - this can happen!
* Should we display the
* trailing garbage or check
* that it is blank or just
* ignore it?
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#if 0
(void)printf("EOM: lines left: %ld\n", lines_left);
#endif
}
break; /* XXX - stop at this point or grab the rest? */
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
this_mip = insert_new_mip(this_mip, top_mip, top_mp, end_pos, partnum++);
this_mp = this_mip->mp;
this_mp->m_lines = 1; /* already read the first line in the header! */
beg_pos = end_pos;
in_header = 1;
}
if (line_len == 1)
in_header = 0;
}
}
static void
split_message(struct mime_info *top_mip)
{
struct mime_info *this_mip;
struct message *top_mp;
struct message *this_mp;
FILE *fp;
off_t beg_pos;
long lines_left; /* must be same size as m_lines */
int in_header;
top_mp = top_mip->mp;
this_mp = salloc_message(top_mp->m_flag, top_mp->m_block, top_mp->m_offset);
this_mip = top_mip;
this_mip->mp = this_mp;
in_header = 1;
fp = setinput(top_mp);
beg_pos = ftello(fp);
for (lines_left = top_mp->m_lines; lines_left > 0; lines_left--) {
size_t line_len;
(void)fgetln(fp, &line_len);
this_mp->m_lines++; /* count the message lines */
if (!in_header)
this_mp->m_blines++; /* count the body lines */
if (in_header && line_len == 1) { /* end of header */
off_t end_pos;
end_pos = ftello(fp);
this_mp->m_size = end_pos - beg_pos;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
this_mip = insert_new_mip(this_mip, top_mip,top_mp, end_pos, 0);
this_mp = this_mip->mp;
this_mp->m_lines = 1; /* we already counted one line in the header! */
beg_pos = end_pos;
in_header = 0; /* never in header again */
}
}
/* close the last message */
this_mp->m_size = ftello(fp) - beg_pos;
}
static const char *
get_command_hook(struct mime_info *mip, const char *domain)
{
char *key;
char *cmd;
if (mip->mi_type == NULL)
return NULL;
/* XXX - should we use easprintf() here? We are probably
* hosed elsewhere if this fails anyway. */
cmd = NULL;
if (mip->mi_subtype) {
if (asprintf(&key, "mime%s-%s-%s",
domain, mip->mi_type, mip->mi_subtype) == -1) {
warn("get_command_hook: subtupe: asprintf");
return NULL;
}
cmd = value(key);
free(key);
}
if (cmd == NULL) {
if (asprintf(&key, "mime%s-%s", domain, mip->mi_type) == -1) {
warn("get_command_hook: type: asprintf");
return NULL;
}
cmd = value(key);
free(key);
}
return cmd;
}
static int
is_basic_alternative(struct mime_info *mip)
{
return
strcasecmp(mip->mi_type, "text") == 0 &&
strcasecmp(mip->mi_subtype, "plain") == 0;
}
static struct mime_info *
select_alternative(struct mime_info *top_mip, struct mime_info *end_mip)
{
struct mime_info *the_mip; /* the chosen alternate */
struct mime_info *this_mip;
/*
* The alternates are supposed to occur in order of
* increasing "complexity". So: if there is at least
* one alternate of type "text/plain", use the last
* one, otherwise default to the first alternate.
*/
the_mip = top_mip->mi_flink;
for (this_mip = top_mip->mi_flink;
this_mip != end_mip;
this_mip = this_mip->mi_flink) {
const char *cmd;
if (this_mip->mi_type == NULL ||
this_mip->mi_subtype == NULL)
continue;
if (is_basic_alternative(this_mip))
the_mip = this_mip;
else if (
(cmd = get_command_hook(this_mip, "-hook")) ||
(cmd = get_command_hook(this_mip, "-head")) ||
(cmd = get_command_hook(this_mip, "-body"))) {
int flags;
/* just get the flags. */
flags = mime_run_command(cmd, NULL);
if ((flags & CMD_FLAG_ALTERNATIVE) != 0)
the_mip = this_mip;
}
}
return the_mip;
}
static inline int
is_multipart(struct mime_info *mip)
{
return mip->mi_type &&
strcasecmp("multipart", mip->mi_type) == 0;
}
static inline int
is_message(struct mime_info *mip)
{
return mip->mi_type &&
strcasecmp("message", mip->mi_type) == 0;
}
static inline int
is_alternative(struct mime_info *mip)
{
return mip->mi_subtype &&
strcasecmp("alternative", mip->mi_subtype) == 0;
}
/*
* Take a mime_info pointer and expand it recursively into all its
* mime parts. Only "multipart" and "message" types recursed into;
* they are handled separately.
*/
static struct mime_info *
expand_mip(struct mime_info *top_mip)
{
struct mime_info *this_mip;
struct mime_info *next_mip;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (top_mip->mi_partnum == 0) {
if (top_mip->mi_blink)
top_mip->mi_partstr = top_mip->mi_blink->mi_partstr;
}
else if (top_mip->mi_parent.mip) {
const char *prefix;
char *cp;
prefix = top_mip->mi_parent.mip->mi_partstr;
(void)sasprintf(&cp, "%s%s%d", prefix,
*prefix ? "." : "", top_mip->mi_partnum);
top_mip->mi_partstr = cp;
}
next_mip = top_mip->mi_flink;
if (is_multipart(top_mip)) {
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
top_mip->mi_ignore_body = 1; /* the first body is ignored */
split_multipart(top_mip);
for (this_mip = top_mip->mi_flink;
this_mip != next_mip;
this_mip = this_mip->mi_flink) {
get_content(this_mip);
}
if (is_alternative(top_mip)) {
this_mip = select_alternative(top_mip, next_mip);
this_mip->mi_partnum = 0; /* suppress partnum display */
this_mip->mi_flink = next_mip;
this_mip->mi_blink = top_mip;
top_mip->mi_flink = this_mip;
}
/*
* Recurse into each part.
*/
for (this_mip = top_mip->mi_flink;
this_mip != next_mip;
this_mip = expand_mip(this_mip))
continue;
}
else if (is_message(top_mip)) {
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
top_mip->mi_ignore_body = 1; /* the first body is ignored */
split_message(top_mip);
this_mip = top_mip->mi_flink;
if (this_mip) {
get_content(this_mip);
/*
* If the one part is MIME encoded, recurse into it.
* XXX - Should this be conditional on subtype "rcs822"?
*/
if (this_mip->mi_type &&
this_mip->mi_version &&
equal(this_mip->mi_version, MIME_VERSION)) {
this_mip->mi_partnum = 0;
(void)expand_mip(this_mip);
}
}
}
return next_mip;
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#if 0
static int
show_partnum(FILE *fp, struct mime_info *mip)
{
int need_dot;
need_dot = 0;
if (mip->mi_parent.mip && mip->mi_parent.mip->mi_parent.mip)
need_dot = show_partnum(fp, mip->mi_parent.mip);
if (mip->mi_partnum) {
(void)fprintf(fp, "%s%d", need_dot ? "." : "", mip->mi_partnum);
need_dot = 1;
}
return need_dot;
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#endif
PUBLIC struct mime_info *
mime_decode_open(struct message *mp)
{
struct mime_info *mip;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
struct mime_info *p;
mip = csalloc(1, sizeof(*mip));
mip->mp = salloc(sizeof(*mip->mp));
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
*mip->mp = *mp; /* copy this so we don't trash the master mp */
get_content(mip);
/* RFC 2049 - sec 2 item 1 */
if (mip->mi_version == NULL ||
!equal(mip->mi_version, MIME_VERSION))
return NULL;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
mip->mi_partstr = "";
if (mip->mi_type)
(void)expand_mip(mip);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
/*
* Get the pipe_end and propagate it down the chain.
*/
mip->mi_pipe_end = last_registered_file(0); /* for mime_decode_close() */
for (p = mip->mi_flink; p; p = p->mi_flink)
p->mi_pipe_end = mip->mi_pipe_end;
/* show_mime_info(stderr, mip, NULL); */
return mip;
}
PUBLIC void
mime_decode_close(struct mime_info *mip)
{
if (mip)
close_top_files(mip->mi_pipe_end);
}
struct prefix_line_args_s {
const char *prefix;
size_t prefixlen;
};
static void
prefix_line(FILE *fi, FILE *fo, void *cookie)
{
struct prefix_line_args_s *args;
const char *line;
const char *prefix;
size_t prefixlen;
size_t length;
args = cookie;
prefix = args->prefix;
prefixlen = args->prefixlen;
while ((line = fgetln(fi, &length)) != NULL) {
if (length > 1)
(void)fputs(prefix, fo);
else
(void)fwrite(prefix, sizeof(*prefix),
prefixlen, fo);
(void)fwrite(line, sizeof(*line), length, fo);
}
(void)fflush(fo);
}
PUBLIC int
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
mime_sendmessage(struct message *mp, FILE *obuf, struct ignoretab *igntab,
const char *prefix, struct mime_info *mip)
{
int error;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
int detachall_flag;
const char *detachdir;
FILE *end_of_prefix;
if (mip == NULL)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return obuf ? /* were we trying to detach? */
sendmessage(mp, obuf, igntab, prefix, NULL) : 0;
/*
* The prefix has two meanigs which we handle here:
* 1) If obuf == NULL, then we are detaching to the 'prefix' directory.
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
* 2) If obuf != NULL, then the prefix is prepended to each line.
*/
detachdir = NULL;
detachall_flag = igntab == detachall;
if (obuf == NULL) {
assert(prefix != NULL); /* coding error! */
if ((obuf = last_registered_file(0)) == NULL)
obuf = stdout;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
detachdir = prefix;
prefix = NULL;
igntab = ignoreall; /* always ignore the headers */
}
/*
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
* Set this early so pipe_end() will work!
*/
mip->mi_fo = obuf;
(void)fflush(obuf); /* Be safe and flush! XXX - necessary? */
/*
* Handle the prefix as a pipe stage so it doesn't get seen by
* any decoding or hooks.
*/
if (prefix != NULL) {
static struct prefix_line_args_s prefix_line_args;
const char *dp, *dp2 = NULL;
for (dp = prefix; *dp; dp++)
if (!is_WSP(*dp))
dp2 = dp;
prefix_line_args.prefixlen = dp2 == 0 ? 0 : dp2 - prefix + 1;
prefix_line_args.prefix = prefix;
mime_run_function(prefix_line, pipe_end(mip), (void*)&prefix_line_args);
}
end_of_prefix = last_registered_file(0);
error = 0;
for (/*EMPTY*/; mip; mip = mip->mi_flink) {
mip->mi_fo = obuf;
mip->mi_head_end = obuf;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
mip->mi_detachdir = detachdir;
mip->mi_detachall = detachall_flag;
error |= sendmessage(mip->mp, pipe_end(mip), igntab, NULL, mip);
close_top_files(end_of_prefix); /* don't close the prefixer! */
}
return error;
}
#ifdef CHARSET_SUPPORT
/**********************************************
* higher level interface to run mime_ficonv().
*/
static void
run_mime_ficonv(struct mime_info *mip, const char *charset)
{
FILE *fo;
iconv_t cd;
fo = pipe_end(mip);
if (charset == NULL ||
mip->mi_charset == NULL ||
strcasecmp(mip->mi_charset, charset) == 0 ||
strcasecmp(mip->mi_charset, "unknown") == 0)
return;
cd = iconv_open(charset, mip->mi_charset);
if (cd == (iconv_t)-1) {
(void)fprintf(fo, "\t [ iconv_open failed: %s ]\n\n",
strerror(errno));
(void)fflush(fo); /* flush here or see double! */
return;
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (mip->mi_detachdir == NULL && /* don't contaminate the detach! */
value(ENAME_MIME_CHARSET_VERBOSE))
(void)fprintf(fo, "\t[ converting %s -> %s ]\n\n",
mip->mi_charset, charset);
mime_run_function(mime_ficonv, fo, cd);
2006-11-28 21:46:04 +03:00
(void)iconv_close(cd);
}
#endif /* CHARSET_SUPPORT */
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC void
run_decoder(struct mime_info *mip, void(*fn)(FILE*, FILE*, void *))
{
#ifdef CHARSET_SUPPORT
char *charset;
charset = value(ENAME_MIME_CHARSET);
if (charset && mip->mi_type && strcasecmp(mip->mi_type, "text") == 0)
run_mime_ficonv(mip, charset);
#endif /* CHARSET_SUPPORT */
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (mip->mi_detachdir == NULL &&
fn == mime_fio_copy)/* XXX - avoid an extra unnecessary pipe stage */
return;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
mime_run_function(fn, pipe_end(mip),
mip->mi_detachdir ? NULL : __UNCONST("add_lf"));
}
/*
* Determine how to handle the display based on the type and subtype
* fields.
*/
enum dispmode_e {
DM_IGNORE = 0x00, /* silently ignore part - must be zero! */
DM_DISPLAY, /* decode and display the part */
DM_UNKNOWN, /* unknown display */
DM_BINARY, /* indicate binary data */
DM_PGPSIGN, /* OpenPGP signed part */
DM_PGPENCR, /* OpenPGP encrypted part */
2009-01-18 04:29:57 +03:00
DM_PGPKEYS, /* OpenPGP keys part */
DM_SENTINEL /* end marker; shouldn't be used */
};
#define APPLICATION_OCTET_STREAM DM_BINARY
static enum dispmode_e
get_display_mode(struct mime_info *mip, mime_codec_t dec)
{
struct mime_subtype_s {
const char *st_name;
enum dispmode_e st_dispmode;
};
struct mime_type_s {
const char *mt_type;
const struct mime_subtype_s *mt_subtype;
enum dispmode_e mt_dispmode; /* default if NULL subtype */
};
static const struct mime_subtype_s text_subtype_tbl[] = {
{ "plain", DM_DISPLAY },
{ "html", DM_DISPLAY }, /* rfc2854 */
{ "rfc822-headers", DM_DISPLAY },
{ "css", DM_DISPLAY }, /* rfc2318 */
{ "enriched", DM_DISPLAY }, /* rfc1523/rfc1563/rfc1896 */
{ "graphics", DM_DISPLAY }, /* rfc0553 */
{ "nroff", DM_DISPLAY }, /* rfc4263 */
{ "red", DM_DISPLAY }, /* rfc4102 */
{ NULL, DM_DISPLAY } /* default */
};
static const struct mime_subtype_s image_subtype_tbl[] = {
{ "tiff", DM_BINARY }, /* rfc2302/rfc3302 */
{ "tiff-fx", DM_BINARY }, /* rfc3250/rfc3950 */
{ "t38", DM_BINARY }, /* rfc3362 */
{ NULL, DM_BINARY } /* default */
};
static const struct mime_subtype_s audio_subtype_tbl[] = {
{ "mpeg", DM_BINARY }, /* rfc3003 */
{ "t38", DM_BINARY }, /* rfc4612 */
{ NULL, DM_BINARY } /* default */
};
static const struct mime_subtype_s video_subtype_tbl[] = {
{ NULL, DM_BINARY } /* default */
};
static const struct mime_subtype_s application_subtype_tbl[] = {
{ "octet-stream", APPLICATION_OCTET_STREAM },
{ "pgp-encrypted", DM_PGPENCR }, /* rfc3156 */
{ "pgp-keys", DM_PGPKEYS }, /* rfc3156 */
{ "pgp-signature", DM_PGPSIGN }, /* rfc3156 */
{ "pdf", DM_BINARY }, /* rfc3778 */
{ "whoispp-query", DM_UNKNOWN }, /* rfc2957 */
{ "whoispp-response", DM_UNKNOWN }, /* rfc2958 */
{ "font-tdpfr", DM_UNKNOWN }, /* rfc3073 */
{ "xhtml+xml", DM_UNKNOWN }, /* rfc3236 */
{ "ogg", DM_UNKNOWN }, /* rfc3534 */
{ "rdf+xml", DM_UNKNOWN }, /* rfc3870 */
{ "soap+xml", DM_UNKNOWN }, /* rfc3902 */
{ "mbox", DM_UNKNOWN }, /* rfc4155 */
{ "xv+xml", DM_UNKNOWN }, /* rfc4374 */
{ "smil", DM_UNKNOWN }, /* rfc4536 */
{ "smil+xml", DM_UNKNOWN }, /* rfc4536 */
{ "json", DM_UNKNOWN }, /* rfc4627 */
{ "voicexml+xml", DM_UNKNOWN }, /* rfc4267 */
{ "ssml+xml", DM_UNKNOWN }, /* rfc4267 */
{ "srgs", DM_UNKNOWN }, /* rfc4267 */
{ "srgs+xml", DM_UNKNOWN }, /* rfc4267 */
{ "ccxml+xml", DM_UNKNOWN }, /* rfc4267 */
{ "pls+xml.", DM_UNKNOWN }, /* rfc4267 */
{ NULL, APPLICATION_OCTET_STREAM } /* default */
};
static const struct mime_type_s mime_type_tbl[] = {
{ "text", text_subtype_tbl, DM_DISPLAY },
{ "image", image_subtype_tbl, DM_IGNORE },
{ "audio", audio_subtype_tbl, DM_IGNORE },
{ "video", video_subtype_tbl, DM_IGNORE },
{ "application", application_subtype_tbl, APPLICATION_OCTET_STREAM },
{ NULL, NULL, DM_UNKNOWN }, /* default */
};
const struct mime_type_s *mtp;
const struct mime_subtype_s *stp;
const char *mi_type;
const char *mi_subtype;
/*
* Silently ignore all multipart bodies.
* 1) In the case of "multipart" types, this typically
* contains a message for non-mime enabled mail readers.
* 2) In the case of "message" type, there should be no body.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (mip->mi_ignore_body) /*is_multipart(mip) || is_message(mip))*/
return DM_IGNORE;
/*
* If the encoding type given but not recognized, treat block
* as "application/octet-stream". rfc 2049 sec 2 part 2.
*/
if (mip->mi_encoding && dec == NULL)
return APPLICATION_OCTET_STREAM;
mi_type = mip->mi_type;
mi_subtype = mip->mi_type ? mip->mi_subtype : NULL;
/*
* If there was no type specified, display anyway so we don't
* miss anything. (The encoding type is known.)
*/
if (mi_type == NULL)
return DM_DISPLAY; /* XXX - default to something safe! */
for (mtp = mime_type_tbl; mtp->mt_type; mtp++) {
if (strcasecmp(mtp->mt_type, mi_type) == 0) {
if (mi_subtype == NULL)
return mtp->mt_dispmode;
for (stp = mtp->mt_subtype; stp->st_name; stp++) {
if (strcasecmp(stp->st_name, mi_subtype) == 0)
return stp->st_dispmode;
}
return stp->st_dispmode;
}
}
return mtp->mt_dispmode;
}
PUBLIC FILE *
mime_decode_body(struct mime_info *mip)
{
static enum dispmode_e dispmode;
mime_codec_t dec;
const char *cmd;
/* close anything left over from mime_decode_head() */
close_top_files(mip->mi_head_end);
/*
* Make sure we flush everything down the pipe so children
* don't see it.
*/
(void)fflush(pipe_end(mip));
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (mip->mi_detachdir) /* We are detaching! Ignore the hooks. */
return mime_detach_parts(mip);
cmd = NULL;
if (mip->mi_command_hook == NULL)
cmd = get_command_hook(mip, "-body");
dec = mime_fio_decoder(mip->mi_encoding);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
/*
* If there is a filter running, we need to send the message
* to it. Otherwise, get the default display mode for this body.
*/
dispmode = cmd || mip->mi_command_hook ? DM_DISPLAY : get_display_mode(mip, dec);
if (dec == NULL) /* make sure we have a usable decoder */
dec = mime_fio_decoder(MIME_TRANSFER_7BIT);
if (dispmode == DM_DISPLAY) {
int flags;
if (cmd == NULL)
/* just get the flags */
flags = mime_run_command(mip->mi_command_hook, NULL);
else
flags = mime_run_command(cmd, pipe_end(mip));
if ((flags & CMD_FLAG_NO_DECODE) == 0)
run_decoder(mip, dec);
return pipe_end(mip);
}
else {
static const struct msg_tbl_s {
enum dispmode_e dm;
const char *msg;
} msg_tbl[] = {
{ DM_BINARY, "binary content" },
{ DM_PGPSIGN, "OpenPGP signature" },
{ DM_PGPENCR, "OpenPGP encrypted" },
{ DM_PGPKEYS, "OpenPGP keys" },
{ DM_UNKNOWN, "unknown data" },
{ DM_IGNORE, NULL },
2009-01-18 04:29:57 +03:00
{ DM_SENTINEL, NULL },
};
const struct msg_tbl_s *mp;
2009-01-18 04:29:57 +03:00
for (mp = msg_tbl; mp->dm != DM_SENTINEL; mp++)
if (mp->dm == dispmode)
break;
2009-01-18 04:29:57 +03:00
assert(mp->dm != DM_SENTINEL); /* msg_tbl is short if this happens! */
if (mp->msg)
(void)fprintf(pipe_end(mip), " [%s]\n\n", mp->msg);
return NULL;
}
}
/************************************************************************
* Higher level header decoding interface.
*
* The core routines are in mime_header.c.
*/
/*
* Decode a portion of the header field.
*
* linebuf buffer to decode into.
* bufsize size of linebuf.
* hdrline full header line including header name.
* srcstr pointer to string to decode
*/
PUBLIC char *
mime_decode_hfield(char *linebuf, size_t bufsize, const char *hdrline, char *srcstr)
{
hfield_decoder_t decode;
decode = mime_hfield_decoder(hdrline);
if (decode) {
decode(linebuf, bufsize, srcstr);
return linebuf;
}
return srcstr;
}
/*
* Return the next header field found in the input stream.
* Return 0 if something found, -1 otherwise.
* For a proper header, "*colon" is set to point to the colon
* terminating the header name. Otherwise it is NULL.
*
* NOTE: unlike gethfield() in support.c this:
* 1) preserves folding (newlines),
* 2) reads until fgetln() gets an EOF,
* 3) only sets *colon if there is a "proper" one.
*/
static int
get_folded_hfield(FILE *f, char *linebuf, size_t bufsize, char **colon)
{
char *cp, *cp2;
char *line;
size_t len;
if ((cp = fgetln(f, &len)) == NULL)
return -1;
for (cp2 = cp;
cp2 < cp + len && isprint((unsigned char)*cp2) &&
!is_WSP(*cp2) && *cp2 != ':';
cp2++)
continue;
len = MIN(bufsize - 1, len);
bufsize -= len;
(void)memcpy(linebuf, cp, len);
*colon = *cp2 == ':' ? linebuf + (cp2 - cp) : NULL;
line = linebuf + len;
for (;;) {
int c;
(void)ungetc(c = getc(f), f);
if (!is_WSP(c))
break;
if ((cp = fgetln(f, &len)) == NULL)
break;
len = MIN(bufsize - 1, len);
bufsize -= len;
if (len == 0)
break;
(void)memcpy(line, cp, len);
line += len;
}
*line = 0;
return 0;
}
static void
decode_header(FILE *fi, FILE *fo, void *cookie __unused)
{
char linebuf[LINESIZE];
char *colon;
#ifdef __lint__
cookie = cookie;
#endif
while (get_folded_hfield(fi, linebuf, sizeof(linebuf), &colon) >= 0) {
char decbuf[LINESIZE];
char *hdrstr;
hdrstr = linebuf;
if (colon)
hdrstr = mime_decode_hfield(decbuf, sizeof(decbuf), hdrstr, hdrstr);
(void)fprintf(fo, hdrstr);
}
}
PUBLIC FILE *
mime_decode_header(struct mime_info *mip)
{
int flags;
const char *cmd;
FILE *fo;
fo = pipe_end(mip);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (mip->mi_detachdir) { /* We are detaching. Don't run anything! */
(void)fflush(fo);
return pipe_end(mip);
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (mip->mi_partnum)
(void)fprintf(fo, "----- Part %s -----\n", mip->mi_partstr);
(void)fflush(fo); /* Flush so the childern don't see it. */
/*
* install the message hook before the head hook.
*/
cmd = get_command_hook(mip, "-hook");
mip->mi_command_hook = cmd;
if (cmd) {
flags = mime_run_command(cmd, pipe_end(mip));
mip->mi_head_end = last_registered_file(0);
}
else {
cmd = get_command_hook(mip, "-head");
mip->mi_head_end = last_registered_file(0);
flags = mime_run_command(cmd, pipe_end(mip));
}
if (value(ENAME_MIME_DECODE_HDR) && (flags & CMD_FLAG_NO_DECODE) == 0)
mime_run_function(decode_header, pipe_end(mip), NULL);
return pipe_end(mip);
}
#endif /* MIME_SUPPORT */