NetBSD/sys/dev/eisa/ahc_eisa.c

542 lines
13 KiB
C
Raw Normal View History

/* $NetBSD: ahc_eisa.c,v 1.10 1996/10/21 22:30:58 thorpej Exp $ */
1996-05-20 04:55:44 +04:00
/*
* Product specific probe and attach routines for:
* 27/284X and aic7770 motherboard SCSI controllers
*
* Copyright (c) 1994, 1995, 1996 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from Id: aic7770.c,v 1.29 1996/05/30 07:18:52 gibbs Exp
*/
#if defined(__FreeBSD__)
#include <eisa.h>
#endif
#if NEISA > 0 || defined(__NetBSD__)
#include <sys/param.h>
#include <sys/systm.h>
#if defined(__FreeBSD__)
#include <sys/devconf.h>
#endif
#include <sys/kernel.h>
#if defined(__NetBSD__)
#include <sys/device.h>
#include <machine/bus.h>
#include <machine/intr.h>
#endif /* defined(__NetBSD__) */
#include <scsi/scsi_all.h>
#include <scsi/scsiconf.h>
#if defined(__FreeBSD__)
#include <machine/clock.h>
#include <i386/eisa/eisaconf.h>
#include <i386/scsi/aic7xxx.h>
#include <dev/aic7xxx/aic7xxx_reg.h>
#define EISA_DEVICE_ID_ADAPTEC_AIC7770 0x04907770
#define EISA_DEVICE_ID_ADAPTEC_274x 0x04907771
#define EISA_DEVICE_ID_ADAPTEC_284xB 0x04907756 /* BIOS enabled */
#define EISA_DEVICE_ID_ADAPTEC_284x 0x04907757 /* BIOS disabled*/
#elif defined(__NetBSD__)
#include <dev/eisa/eisareg.h>
#include <dev/eisa/eisavar.h>
#include <dev/eisa/eisadevs.h>
#include <dev/ic/aic7xxxreg.h>
#include <dev/ic/aic7xxxvar.h>
#endif /* defined(__NetBSD__) */
#define AHC_EISA_SLOT_OFFSET 0xc00
#define AHC_EISA_IOSIZE 0x100
#define INTDEF 0x5cul /* Interrupt Definition Register */
#if defined(__FreeBSD__)
static int aic7770probe __P((void));
static int aic7770_attach __P((struct eisa_device *e_dev));
static struct eisa_driver ahc_eisa_driver = {
"ahc",
aic7770probe,
aic7770_attach,
/*shutdown*/NULL,
&ahc_unit
};
DATA_SET (eisadriver_set, ahc_eisa_driver);
static struct kern_devconf kdc_aic7770 = {
0, 0, 0, /* filled in by dev_attach */
"ahc", 0, { MDDT_EISA, 0, "bio" },
eisa_generic_externalize, 0, 0, EISA_EXTERNALLEN,
&kdc_eisa0, /* parent */
0, /* parentdata */
DC_UNCONFIGURED, /* always start out here */
NULL,
DC_CLS_MISC /* host adapters aren't special */
};
static char *aic7770_match __P((eisa_id_t type));
static char*
aic7770_match(type)
eisa_id_t type;
{
switch(type) {
case EISA_DEVICE_ID_ADAPTEC_AIC7770:
return ("Adaptec aic7770 SCSI host adapter");
break;
case EISA_DEVICE_ID_ADAPTEC_274x:
return ("Adaptec 274X SCSI host adapter");
break;
case EISA_DEVICE_ID_ADAPTEC_284xB:
case EISA_DEVICE_ID_ADAPTEC_284x:
return ("Adaptec 284X SCSI host adapter");
break;
default:
break;
}
return (NULL);
}
static int
aic7770probe(void)
{
u_long iobase;
char intdef;
u_long irq;
struct eisa_device *e_dev = NULL;
int count;
count = 0;
while ((e_dev = eisa_match_dev(e_dev, aic7770_match))) {
iobase = (e_dev->ioconf.slot * EISA_SLOT_SIZE)
+ AHC_EISA_SLOT_OFFSET;
ahc_reset(iobase);
eisa_add_iospace(e_dev, iobase, AHC_EISA_IOSIZE, RESVADDR_NONE);
intdef = inb(INTDEF + iobase);
switch (intdef & 0xf) {
case 9:
irq = 9;
break;
case 10:
irq = 10;
break;
case 11:
irq = 11;
break;
case 12:
irq = 12;
break;
case 14:
irq = 14;
break;
case 15:
irq = 15;
break;
default:
1996-10-13 05:37:04 +04:00
printf("aic7770 at slot %d: illegal "
1996-10-10 23:54:10 +04:00
"irq setting %d\n", e_dev->ioconf.slot,
intdef);
continue;
}
eisa_add_intr(e_dev, irq);
eisa_registerdev(e_dev, &ahc_eisa_driver, &kdc_aic7770);
if(e_dev->id == EISA_DEVICE_ID_ADAPTEC_284xB
|| e_dev->id == EISA_DEVICE_ID_ADAPTEC_284x) {
/* Our real parent is the isa bus. Say so. */
e_dev->kdc->kdc_parent = &kdc_isa0;
}
count++;
}
return count;
}
#elif defined(__NetBSD__)
/*
* Under normal circumstances, these messages are unnecessary
* and not terribly cosmetic.
*/
#ifdef DEBUG
#define bootverbose 1
#else
#define bootverbose 0
#endif
int ahc_eisa_irq __P((bus_space_tag_t, bus_space_handle_t));
int ahc_eisa_match __P((struct device *, void *, void *));
void ahc_eisa_attach __P((struct device *, struct device *, void *));
struct cfattach ahc_eisa_ca = {
sizeof(struct ahc_data), ahc_eisa_match, ahc_eisa_attach
};
/*
* Return irq setting of the board, otherwise -1.
*/
int
ahc_eisa_irq(iot, ioh)
bus_space_tag_t iot;
bus_space_handle_t ioh;
{
int irq;
u_char intdef;
ahc_reset("ahc_eisa", iot, ioh);
intdef = bus_space_read_1(iot, ioh, INTDEF);
switch (irq = (intdef & 0xf)) {
case 9:
case 10:
case 11:
case 12:
case 14:
case 15:
break;
default:
1996-10-13 05:37:04 +04:00
printf("ahc_eisa_irq: illegal irq setting %d\n", intdef);
return -1;
}
/* Note that we are going and return (to probe) */
return irq;
}
/*
* Check the slots looking for a board we recognise
* If we find one, note it's address (slot) and call
* the actual probe routine to check it out.
*/
int
ahc_eisa_match(parent, match, aux)
struct device *parent;
void *match, *aux;
{
struct eisa_attach_args *ea = aux;
bus_space_tag_t iot = ea->ea_iot;
bus_space_handle_t ioh;
int irq;
/* must match one of our known ID strings */
if (strcmp(ea->ea_idstring, "ADP7770") &&
strcmp(ea->ea_idstring, "ADP7771")
#if 0
&& strcmp(ea->ea_idstring, "ADP7756") /* not EISA, but VL */
&& strcmp(ea->ea_idstring, "ADP7757") /* not EISA, but VL */
#endif
)
return (0);
if (bus_space_map(iot, EISA_SLOT_ADDR(ea->ea_slot) +
AHC_EISA_SLOT_OFFSET, AHC_EISA_IOSIZE, 0, &ioh))
return (0);
1996-05-16 10:39:34 +04:00
irq = ahc_eisa_irq(iot, ioh);
1996-05-16 10:39:34 +04:00
bus_space_unmap(iot, ioh, AHC_EISA_IOSIZE);
1996-05-16 10:39:34 +04:00
return (irq >= 0);
}
#endif /* defined(__NetBSD__) */
#if defined(__FreeBSD__)
static int
aic7770_attach(e_dev)
struct eisa_device *e_dev;
#elif defined(__NetBSD__)
void
ahc_eisa_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
#endif
{
ahc_type type;
#if defined(__FreeBSD__)
struct ahc_data *ahc;
resvaddr_t *iospace;
int unit = e_dev->unit;
int irq = ffs(e_dev->ioconf.irq) - 1;
iospace = e_dev->ioconf.ioaddrs.lh_first;
if(!iospace)
return -1;
switch(e_dev->id) {
case EISA_DEVICE_ID_ADAPTEC_AIC7770:
type = AHC_AIC7770;
break;
case EISA_DEVICE_ID_ADAPTEC_274x:
type = AHC_274;
break;
case EISA_DEVICE_ID_ADAPTEC_284xB:
case EISA_DEVICE_ID_ADAPTEC_284x:
type = AHC_284;
break;
default:
1996-10-13 05:37:04 +04:00
printf("aic7770_attach: Unknown device type!\n");
return -1;
break;
}
if(!(ahc = ahc_alloc(unit, iospace->addr, type, AHC_FNONE)))
return -1;
eisa_reg_start(e_dev);
if(eisa_reg_iospace(e_dev, iospace)) {
ahc_free(ahc);
return -1;
}
/*
* The IRQMS bit enables level sensitive interrupts. Only allow
* IRQ sharing if it's set.
*/
if(eisa_reg_intr(e_dev, irq, ahc_intr, (void *)ahc, &bio_imask,
/*shared ==*/ahc->pause & IRQMS)) {
ahc_free(ahc);
return -1;
}
eisa_reg_end(e_dev);
#elif defined(__NetBSD__)
struct ahc_data *ahc = (void *)self;
struct eisa_attach_args *ea = aux;
bus_space_tag_t iot = ea->ea_iot;
bus_space_handle_t ioh;
int irq;
1996-05-16 10:30:22 +04:00
eisa_chipset_tag_t ec = ea->ea_ec;
eisa_intr_handle_t ih;
const char *model, *intrstr;
if (bus_space_map(iot, EISA_SLOT_ADDR(ea->ea_slot) +
AHC_EISA_SLOT_OFFSET, AHC_EISA_IOSIZE, 0, &ioh))
panic("ahc_eisa_attach: could not map I/O addresses");
if ((irq = ahc_eisa_irq(iot, ioh)) < 0)
panic("ahc_eisa_attach: ahc_eisa_irq failed!");
if (strcmp(ea->ea_idstring, "ADP7770") == 0) {
model = EISA_PRODUCT_ADP7770;
type = AHC_AIC7770;
} else if (strcmp(ea->ea_idstring, "ADP7771") == 0) {
model = EISA_PRODUCT_ADP7771;
type = AHC_274;
#if 0
} else if (strcmp(ea->ea_idstring, "ADP7756") == 0) {
model = EISA_PRODUCT_ADP7756;
type = AHC_284;
} else if (strcmp(ea->ea_idstring, "ADP7757") == 0) {
model = EISA_PRODUCT_ADP7757;
type = AHC_284;
#endif
} else {
panic("ahc_eisa_attach: Unknown device type %s\n",
ea->ea_idstring);
}
1996-10-13 05:37:04 +04:00
printf(": %s\n", model);
ahc_construct(ahc, iot, ioh, type, AHC_FNONE);
1996-05-16 10:30:22 +04:00
if (eisa_intr_map(ec, irq, &ih)) {
1996-10-13 05:37:04 +04:00
printf("%s: couldn't map interrupt (%d)\n",
1996-10-10 23:54:10 +04:00
ahc->sc_dev.dv_xname, irq);
return;
}
#endif /* defined(__NetBSD__) */
/*
* Tell the user what type of interrupts we're using.
* usefull for debugging irq problems
*/
if(bootverbose) {
1996-10-13 05:37:04 +04:00
printf("%s: Using %s Interrupts\n",
1996-10-10 23:54:10 +04:00
ahc_name(ahc),
ahc->pause & IRQMS ? "Level Sensitive" : "Edge Triggered");
}
/*
* Now that we know we own the resources we need, do the
* card initialization.
*
* First, the aic7770 card specific setup.
*/
switch( ahc->type ) {
case AHC_AIC7770:
case AHC_274:
{
u_char biosctrl = AHC_INB(ahc, HA_274_BIOSCTRL);
/* Get the primary channel information */
ahc->flags |= (biosctrl & CHANNEL_B_PRIMARY);
if((biosctrl & BIOSMODE) == BIOSDISABLED)
ahc->flags |= AHC_USEDEFAULTS;
break;
}
case AHC_284:
{
/* XXX
* All values are automagically intialized at
* POST for these cards, so we can always rely
* on the Scratch Ram values. However, we should
* read the SEEPROM here (Dan has the code to do
* it) so we can say what kind of translation the
* BIOS is using. Printing out the geometry could
* save a lot of users the grief of failed installs.
*/
break;
}
default:
break;
}
/*
* See if we have a Rev E or higher aic7770. Anything below a
* Rev E will have a R/O autoflush disable configuration bit.
* It's still not clear exactly what is differenent about the Rev E.
* We think it allows 8 bit entries in the QOUTFIFO to support
* "paging" SCBs so you can have more than 4 commands active at
* once.
*/
{
char *id_string;
u_char sblkctl;
u_char sblkctl_orig;
sblkctl_orig = AHC_INB(ahc, SBLKCTL);
sblkctl = sblkctl_orig ^ AUTOFLUSHDIS;
AHC_OUTB(ahc, SBLKCTL, sblkctl);
sblkctl = AHC_INB(ahc, SBLKCTL);
if(sblkctl != sblkctl_orig)
{
id_string = "aic7770 >= Rev E, ";
/*
* Ensure autoflush is enabled
*/
sblkctl &= ~AUTOFLUSHDIS;
AHC_OUTB(ahc, SBLKCTL, sblkctl);
/* Allow paging on this adapter */
ahc->flags |= AHC_PAGESCBS;
}
else
id_string = "aic7770 <= Rev C, ";
1996-10-13 05:37:04 +04:00
printf("%s: %s", ahc_name(ahc), id_string);
}
/* Setup the FIFO threshold and the bus off time */
{
u_char hostconf = AHC_INB(ahc, HOSTCONF);
AHC_OUTB(ahc, BUSSPD, hostconf & DFTHRSH);
AHC_OUTB(ahc, BUSTIME, (hostconf << 2) & BOFF);
}
/*
* Generic aic7xxx initialization.
*/
if(ahc_init(ahc)){
#if defined(__FreeBSD__)
ahc_free(ahc);
/*
* The board's IRQ line is not yet enabled so it's safe
* to release the irq.
*/
eisa_release_intr(e_dev, irq, ahc_intr);
return -1;
#elif defined(__NetBSD__)
ahc_free(ahc);
return;
#endif
}
/*
* Enable the board's BUS drivers
*/
AHC_OUTB(ahc, BCTL, ENABLE);
#if defined(__FreeBSD__)
/*
* Enable our interrupt handler.
*/
if(eisa_enable_intr(e_dev, irq)) {
ahc_free(ahc);
eisa_release_intr(e_dev, irq, ahc_intr);
return -1;
}
e_dev->kdc->kdc_state = DC_BUSY; /* host adapters always busy */
#elif defined(__NetBSD__)
1996-05-16 10:30:22 +04:00
intrstr = eisa_intr_string(ec, ih);
/*
* The IRQMS bit enables level sensitive interrupts only allow
* IRQ sharing if its set.
*/
1996-05-16 10:30:22 +04:00
ahc->sc_ih = eisa_intr_establish(ec, ih,
ahc->pause & IRQMS ? IST_LEVEL : IST_EDGE, IPL_BIO, ahc_intr, ahc
#ifdef __OpenBSD__
, ahc->sc_dev.dv_xname
#endif
);
if (ahc->sc_ih == NULL) {
1996-10-13 05:37:04 +04:00
printf("%s: couldn't establish interrupt",
1996-10-10 23:54:10 +04:00
ahc->sc_dev.dv_xname);
if (intrstr != NULL)
1996-10-13 05:37:04 +04:00
printf(" at %s", intrstr);
printf("\n");
ahc_free(ahc);
return;
}
if (intrstr != NULL)
1996-10-13 05:37:04 +04:00
printf("%s: interrupting at %s\n", ahc->sc_dev.dv_xname,
intrstr);
#endif /* defined(__NetBSD__) */
/* Attach sub-devices - always succeeds */
ahc_attach(ahc);
#if defined(__FreeBSD__)
return 0;
#endif
}
#endif /* NEISA > 0 */