NetBSD/sys/dev/pci/ppbreg.h

111 lines
4.4 KiB
C
Raw Normal View History

2005-12-11 15:16:03 +03:00
/* $NetBSD: ppbreg.h,v 1.6 2005/12/11 12:22:50 christos Exp $ */
/*
* Copyright (c) 1996 Christopher G. Demetriou. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Christopher G. Demetriou
* for the NetBSD Project.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* PCI-PCI Bridge chip register definitions and macros.
* Derived from information found in the ``PCI to PCI Bridge
* Architecture Specification, Revision 1.0, April 5, 1994.''
*
* XXX much is missing.
*/
/*
* Register offsets
*/
#define PPB_REG_BASE0 0x10 /* Base Addr Reg. 0 */
#define PPB_REG_BASE1 0x14 /* Base Addr Reg. 1 */
#define PPB_REG_BUSINFO 0x18 /* Bus information */
#define PPB_REG_IOSTATUS 0x1c /* I/O base+lim & sec stat */
#define PPB_REG_MEM 0x20 /* Memory base/limit */
#define PPB_REG_PREFMEM 0x24 /* Pref Mem base/limit */
#define PPB_REG_PREFBASE_HI32 0x28 /* Pref Mem base high bits */
#define PPB_REG_PREFLIM_HI32 0x2c /* Pref Mem lim high bits */
#define PPB_REG_IO_HI 0x30 /* I/O base+lim high bits */
#define PPB_REG_BRIDGECONTROL 0x3c /* bridge control register */
/*
* Macros to extract the contents of the "Bus Info" register.
*/
#define PPB_BUSINFO_PRIMARY(bir) \
((bir >> 0) & 0xff)
#define PPB_BUSINFO_SECONDARY(bir) \
((bir >> 8) & 0xff)
#define PPB_BUSINFO_SUBORDINATE(bir) \
((bir >> 16) & 0xff)
#define PPB_BUSINFO_SECLAT(bir) \
((bir >> 24) & 0xff)
/*
* Routine to translate between secondary bus interrupt pin/device number and
* primary bus interrupt pin number.
*/
#define PPB_INTERRUPT_SWIZZLE(pin, device) \
((((pin) + (device) - 1) % 4) + 1)
/*
* secondary bus I/O base and limits
*/
#define PPB_IOBASE_SHIFT 0
#define PPB_IOLIMIT_SHIFT 8
#define PPB_IO_MASK 0xf000
#define PPB_IO_MIN 4096
/*
* secondary bus memory base and limits
*/
#define PPB_MEMBASE_SHIFT 0
#define PPB_MEMLIMIT_SHIFT 16
#define PPB_MEM_MASK 0xfff00000
#define PPB_MEM_SHIFT 16
#define PPB_MEM_MIN 0x00100000
2005-02-27 03:26:58 +03:00
/*
* bridge control register (see table 3.9 of ppb rev. 1.1)
*
* Note these are in the *upper* 16 bits if the Bridge Control
* Register (the bottom 16 are Interrupt Line and Interrupt Pin).
*/
#define PPB_BC_BITBASE 16
#define PPB_BC_PARITYERRORRESPONSE_ENABLE (1U << (0 + PPB_BC_BITBASE))
#define PPB_BC_SERR_ENABLE (1U << (1 + PPB_BC_BITBASE))
#define PPB_BC_ISA_ENABLE (1U << (2 + PPB_BC_BITBASE))
#define PPB_BC_VGA_ENABLE (1U << (3 + PPB_BC_BITBASE))
#define PPB_BC_MASTER_ABORT_MODE (1U << (5 + PPB_BC_BITBASE))
#define PPB_BC_SECONDARY_RESET (1U << (6 + PPB_BC_BITBASE))
#define PPB_BC_FAST_B2B_ENABLE (1U << (7 + PPB_BC_BITBASE))
/* PCI 2.2 */
#define PPB_BC_PRIMARY_DISCARD_TIMEOUT (1U << (8 + PPB_BC_BITBASE))
#define PPB_BC_SECONDARY_DISCARD_TIMEOUT (1U << (9 + PPB_BC_BITBASE))
#define PPB_BC_DISCARD_TIMER_STATUS (1U << (10 + PPB_BC_BITBASE))
#define PPB_BC_DISCARD_TIMER_SERR_ENABLE (1U << (11 + PPB_BC_BITBASE))