NetBSD/sys/arch/vax/conf/GENERIC

#	$NetBSD: GENERIC,v 1.58 2000/02/26 17:35:42 oster Exp $
#
# GENERIC VAX configuration file; all supported devices.
#

include		"arch/vax/conf/std.vax"

#ident 		"GENERIC-$Revision: 1.58 $"

# Here are all different supported CPU types listed.
options 	"VAX8600"
options 	"VAX8200"
options 	"VAX780"
options 	"VAX750"
options 	"VAX630"	# MV II
options 	"VAX650"	# MV III, 3600, 3800, 3900
options 	"VAX670"	# VAX 4000/300
options 	"VAX410"	# VS 2000
options 	"VAX43"		# VS 3100/76
options 	"VAX46"		# VS 4000/60
options 	"VAX48"		# VS 4000 VLC
options 	"VAX49"		# VS 4000/90

# Max users on system; this is just a hint
maxusers	8

# Kernel compiled-in symbolic debugger & system call tracer
#options 	DDB
#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
options 	KTRACE
#options 	DIAGNOSTIC,DEBUG,KMEMSTATS,PMAPDEBUG,TRAPDEBUG

#options 	SCSIVERBOSE		# Verbose SCSI errors

# Pull in config fragments for kernel crypto.  This is required for
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
# one of these, based on whether you use crypto-us or crypto-intl, and
# adjust the prefixes as necessary.

#prefix ../crypto-us/sys
#cinclude "conf/files.crypto-us"
#prefix

#prefix ../crypto-intl/sys
#cinclude "conf/files.crypto-intl"
#prefix

# Network support
#options 	GATEWAY
options         INET
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security

# All supported filesystem types
file-system 	FFS
file-system 	LFS
file-system 	MFS
file-system 	NFS
file-system 	FDESC
file-system 	KERNFS
file-system 	NULLFS
file-system 	OVERLAY		# overlay file system
file-system 	PROCFS
file-system 	UMAPFS
file-system 	UNION
file-system 	CD9660

options 	QUOTA
#options 	FFS_EI		# FFS Endian Independant support
#options 	SOFTDEP         # FFS soft updates support.
options 	NFSSERVER
options 	NFS_BOOT_BOOTP,NFS_BOOT_DHCP	# Use bootp <> dhcp
options 	NFS_BOOT_BOOTPARAM	# Use the Sun way for netbooting.

# WS console uses VT100 terminal emulation
options 	WSEMUL_VT100
options 	WSDISPLAY_DEFAULTSCREENS=8

# System V shared memory & semaphores support.
options 	SYSVMSG
options 	SYSVSEM
options 	SYSVSHM

# Old compat stuff; needed to run 4.3BSD Reno programs.
# Note that if COMPAT_ULTRIX is set, you lose compatibility with
# 4.3BSD Reno programs and get Ultrix compatibility instead.
# (They cannot coexist).
options 	COMPAT_VAX1K	# Must be present to run pre-1.4 binaries.
options 	COMPAT_43
options 	COMPAT_09
options 	COMPAT_10
options 	COMPAT_11
options 	COMPAT_12
options 	COMPAT_13
options 	COMPAT_14
#options 	COMPAT_ULTRIX
options 	COMPAT_IBCS2	# DEC SVR.3 compatilibity

options 	LKM

# Kernel(s) to compile
config          netbsd root on ? type ?

mainbus0	at root

# All buses; from the beginning attached to mainbus.
abus0		at mainbus0		# Master bus on VAX 8600
sbi0		at mainbus0		# SBI, master bus on 11/780.
cmi0		at mainbus0		# 11/750 internal bus.
bi0		at mainbus0		# VAX 8200 
vsbus0		at mainbus0		# All VAXstations
ibus0		at mainbus0		# All Microvax
#nbi0		at mainbus0		# VAX 8800
#xmi0		at mainbus0		# VAX 6000

# Vsbus, the virtual VAXstation bus, and possible devices.
le0		at vsbus0 csr 0x200e0000 # LANCE ethernet
ze0		at vsbus0 csr 0x20008000 # SGEC ethernet
dz0		at vsbus0 csr 0x200a0000 # DC-367 DZ-11 lookalike ctlr
dz0		at vsbus0 csr 0x25000000 # VS4000/90 serial line
#hdc0		at vsbus0 csr 0x200c0000 # HDC9224 MFM/floppy ctlr
ncr0		at vsbus0 csr 0x200c0080 # VS2000/3100 SCSI-ctlr
ncr1		at vsbus0 csr 0x200c0180 # VS2000/3100 SCSI-ctlr
smg0		at vsbus0 csr 0x200f0000 # Small monochrome display ctlr.
#clr0		at vsbus0 csr 0x30000000 # 4- or 8-bitplans color graphics

#rd*		at hdc0 drive?		# RD5x disks
#ry*		at hdc0 drive?		# RX floppies

# Ibus, the internal bus on most Microvaxen
uba0		at ibus0 		# Qbus adapter
ze0		at ibus0 		# SGEC on-board ethernet
#shac0		at ibus0 		# DSSI controller

# Devices connected at VAXBI
cpu*		at bi? node?		# KA820/KA825 cpu
mem*		at bi? node?		# Memory subsystems
#uba*		at bi? node?		# DWBUA BI-Unibus adapter
#ni*		at bi? node?		# DEBNA/DEBNT ethernet adapter
#kdb*		at bi? node?		# KDB50 MSCP disk ctlr
#mscpbus*	at kdb?

# CMI (VAX 11/750)
mem*		at cmi? tr?		# Memory subsystems
uba*		at cmi? tr?		# Unibus adapters
mba*		at cmi? tr?		# Massbus adapters

# SBI (VAX 11/780, VAX 8600)
sbi*		at abus0		# VAX 8600 can have up to 4 SBI's.

mem*		at sbi? tr?		# Memory subsystems
uba*		at sbi? tr?		# Unibus adapters
mba*		at sbi? tr?		# Massbus adapters

# Devices on Massbus adapters
hp*		at mba? drive?		# RM/RP disk drives

# Devices on Unibus/Qbus adapters
uda0		at uba?	csr 0172150	# UDA50/RQDX?
uda1		at uba?	csr 0160334
mtc0		at uba? csr 0174500	# Tape MSCP ctlr
#ts0		at uba? csr 0172520	# TS11/TSV05 tape.
#qd0		at uba? csr 0177400	# 4- or 8-bitplans color graphics
#qv0		at uba? csr 0177400	# Monochrome graphics
#de0		at uba? csr 0174510	# DELUA/DEUNA
qe0		at uba? csr 0174440	# DEQNA/DELQA
dhu0		at uba? csr 0160440	# DHU-11
dz0		at uba? csr 0160100	# DZ-11
dl0		at uba? csr 0176500	# DL-11

# MSCP devices
mscpbus*	at uda?
mscpbus*	at mtc?
#mscpbus*	at kdb?

ra*		at mscpbus? drive?	# MSCP disk
rx*		at mscpbus? drive?	# MSCP floppy
mt*		at mscpbus? drive?	# MSCP tape

# VS2000 builtin MFM controller (HDC9224)
#hdc0		at vsbus0		# The strange builtin MFM controller

# SCSI devices
scsibus*	at ncr?

sd*		at scsibus? target? lun?
st*		at scsibus? target? lun?
cd*		at scsibus? target? lun?
ch*		at scsibus? target? lun?
ss*		at scsibus? target? lun?
uk*		at scsibus? target? lun?

# VAXstation graphics support
wsdisplay0	at smg0
#wsdisplay0	at clr0
#wsdisplay0	at qd0
#wsdisplay0	at qv0
lkc0		at dz0

pseudo-device   loop	1
pseudo-device   pty	48
pseudo-device	bpfilter 8		# Not supported by de yet.
pseudo-device	sl	2
pseudo-device	ppp	2
pseudo-device	tun	2
#pseudo-device	gre	2		# generic L3 over IP tunnel
pseudo-device	gif	4		# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith	1		# IPv[46] tcp relay translation i/f
pseudo-device	tb	1
pseudo-device	vnd	4
pseudo-device	ccd	4
#pseudo-device	raid	4		# RAIDframe disk driver
#options	RAID_AUTOCONFIG		# auto-configuration of RAID components
# rnd is EXPERIMENTAL
#pseudo-device	rnd			# /dev/random and in-kernel generator
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on the component auto-detection and auto-configuration of RAID sets. Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files. 2000-02-26 20:35:33 +03:00			`# $NetBSD: GENERIC,v 1.58 2000/02/26 17:35:42 oster Exp $`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00			`#`
Add VAX650, mba, hp, ts. Change uba to be *'ed. 1996-02-11 16:28:25 +03:00			`# GENERIC VAX configuration file; all supported devices.`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00			`#`

Support for DL11 (-compatible) async ctlr. Written by Ben Harris (bjh@mail.dotcom.fr). 1997-02-04 22:13:15 +03:00			`include "arch/vax/conf/std.vax"`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on the component auto-detection and auto-configuration of RAID sets. Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files. 2000-02-26 20:35:33 +03:00			`#ident "GENERIC-$Revision: 1.58 $"`
Add commented out "ident"-command 2000-01-24 02:46:04 +03:00
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00			`# Here are all different supported CPU types listed.`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`options "VAX8600"`
			`options "VAX8200"`
			`options "VAX780"`
			`options "VAX750"`
			`options "VAX630" # MV II`
			`options "VAX650" # MV III, 3600, 3800, 3900`
Buggfixes for VS 4000/VLC. Basic support for VS4000/90 and MV4000/300. From Michael Kukat. 1999-03-27 01:04:07 +03:00			`options "VAX670" # VAX 4000/300`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`options "VAX410" # VS 2000`
			`options "VAX43" # VS 3100/76`
VAX logical page size increased to 4k. 1998-08-21 17:46:38 +04:00			`options "VAX46" # VS 4000/60`
Basic KA48 (VAXstation 4000 VLC) support. From Michael Kukat <michael@camaronet.de> 1999-03-09 15:57:57 +03:00			`options "VAX48" # VS 4000 VLC`
Buggfixes for VS 4000/VLC. Basic support for VS4000/90 and MV4000/300. From Michael Kukat. 1999-03-27 01:04:07 +03:00			`options "VAX49" # VS 4000/90`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00			`# Max users on system; this is just a hint`
Add VAX650, mba, hp, ts. Change uba to be *'ed. 1996-02-11 16:28:25 +03:00			`maxusers 8`
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00
Support for tmscp tapes. 1995-03-30 02:50:47 +04:00			`# Kernel compiled-in symbolic debugger & system call tracer`
VAX logical page size increased to 4k. 1998-08-21 17:46:38 +04:00			`#options DDB`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`#options DDB_HISTORY_SIZE=100 # enable history editing in DDB`
			`options KTRACE`
Change vsbus to take a locator for all devices. Figure out interrupt vector/mask on vsbus by forcing all devices to generate interrupts in the match routine, like on unibus. 1999-03-13 18:16:47 +03:00			`#options DIAGNOSTIC,DEBUG,KMEMSTATS,PMAPDEBUG,TRAPDEBUG`
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00
add a before tab to SCSIVERBOSE 1997-08-23 23:16:06 +04:00			`#options SCSIVERBOSE # Verbose SCSI errors`
add commented out reference SCSIVERBOSE option 1997-08-20 22:38:13 +04:00
bring in content of GENERIC.v6 into GENERIC. remove GENERIC.v6 file (as it is part of GENERIC now). "faith" interface is commented out by default as it is not really for general use. IPsec items are commented out as well, though we can enable "options IPSEC" without export-related issue ("options IPSEC" will enable authentication portion only). We may need to think about it again. if you have problem compiling with INET6 on archs I do not have access to, please contact me. XXX what to do with arch/arm32/SHARK{,.v6}? 1999-11-21 17:00:37 +03:00			`# Pull in config fragments for kernel crypto. This is required for`
			`# options IPSEC etc. to work. If you want to run with IPSEC, uncomment`
			`# one of these, based on whether you use crypto-us or crypto-intl, and`
			`# adjust the prefixes as necessary.`

			`#prefix ../crypto-us/sys`
			`#cinclude "conf/files.crypto-us"`
			`#prefix`

			`#prefix ../crypto-intl/sys`
			`#cinclude "conf/files.crypto-intl"`
			`#prefix`

Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00			`# Network support`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`#options GATEWAY`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00			`options INET`
bring in content of GENERIC.v6 into GENERIC. remove GENERIC.v6 file (as it is part of GENERIC now). "faith" interface is commented out by default as it is not really for general use. IPsec items are commented out as well, though we can enable "options IPSEC" without export-related issue ("options IPSEC" will enable authentication portion only). We may need to think about it again. if you have problem compiling with INET6 on archs I do not have access to, please contact me. XXX what to do with arch/arm32/SHARK{,.v6}? 1999-11-21 17:00:37 +03:00			`options INET6 # IPV6`
			`#options IPSEC # IP security`
			`#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)`
			`#options IPSEC_DEBUG # debug for IP security`
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00
			`# All supported filesystem types`
Adopt for new file system and root spec grammar. 1997-01-31 05:10:33 +03:00			`file-system FFS`
			`file-system LFS`
			`file-system MFS`
			`file-system NFS`
			`file-system FDESC`
			`file-system KERNFS`
			`file-system NULLFS`
Add overlay to kernel configs. 2000-01-20 22:12:28 +03:00			`file-system OVERLAY # overlay file system`
Adopt for new file system and root spec grammar. 1997-01-31 05:10:33 +03:00			`file-system PROCFS`
			`file-system UMAPFS`
			`file-system UNION`
Change vsbus to take a locator for all devices. Figure out interrupt vector/mask on vsbus by forcing all devices to generate interrupts in the match routine, like on unibus. 1999-03-13 18:16:47 +03:00			`file-system CD9660`
Adopt for new file system and root spec grammar. 1997-01-31 05:10:33 +03:00
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`options QUOTA`
Add commented out "options FFS_EI" 1998-03-18 19:34:41 +03:00			`#options FFS_EI # FFS Endian Independant support`
Add commented out option SOFTDEP to all GENERIC kernels. 1999-11-15 22:10:44 +03:00			`#options SOFTDEP # FFS soft updates support.`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`options NFSSERVER`
Buggfixes for VS 4000/VLC. Basic support for VS4000/90 and MV4000/300. From Michael Kukat. 1999-03-27 01:04:07 +03:00			`options NFS_BOOT_BOOTP,NFS_BOOT_DHCP # Use bootp <> dhcp`
Add support for QDSS graphic console. Code originated from 4.4BSD, ported to NetBSD by Boris Gjenero <bgjenero@undergrad.math.uwaterloo.ca> 1998-03-21 13:02:39 +03:00			`options NFS_BOOT_BOOTPARAM # Use the Sun way for netbooting.`

Use vt100 console emulation instead of sun. :-) 1998-12-10 21:24:52 +03:00			`# WS console uses VT100 terminal emulation`
			`options WSEMUL_VT100`
Buggfixes for VS 4000/VLC. Basic support for VS4000/90 and MV4000/300. From Michael Kukat. 1999-03-27 01:04:07 +03:00			`options WSDISPLAY_DEFAULTSCREENS=8`
merge in changes from 1.1 release branch 1995-11-30 03:56:23 +03:00
			`# System V shared memory & semaphores support.`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`options SYSVMSG`
			`options SYSVSEM`
			`options SYSVSHM`
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00
Add VAX650, mba, hp, ts. Change uba to be *'ed. 1996-02-11 16:28:25 +03:00			`# Old compat stuff; needed to run 4.3BSD Reno programs.`
			`# Note that if COMPAT_ULTRIX is set, you lose compatibility with`
			`# 4.3BSD Reno programs and get Ultrix compatibility instead.`
			`# (They cannot coexist).`
VAX logical page size increased to 4k. 1998-08-21 17:46:38 +04:00			`options COMPAT_VAX1K # Must be present to run pre-1.4 binaries.`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`options COMPAT_43`
			`options COMPAT_09`
			`options COMPAT_10`
			`options COMPAT_11`
			`options COMPAT_12`
Add COMPAT_13. 1997-12-01 19:31:29 +03:00			`options COMPAT_13`
It's time to be COMPAT_14. 1999-07-29 14:37:12 +04:00			`options COMPAT_14`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`#options COMPAT_ULTRIX`
Enable IBCS2 (DEC SVR3) compatibility. 2000-01-13 18:09:52 +03:00			`options COMPAT_IBCS2 # DEC SVR.3 compatilibity`
Support for tmscp tapes. 1995-03-30 02:50:47 +04:00
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`options LKM`
Support for tmscp tapes. 1995-03-30 02:50:47 +04:00
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00			`# Kernel(s) to compile`
Adopt for new file system and root spec grammar. 1997-01-31 05:10:33 +03:00			`config netbsd root on ? type ?`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00
Change backplace0 to mainbus0 (for consistency with other ports). Remove unused function protocols from ka410.h and ka43.h Fix some ka46 missing references 1998-10-06 08:04:30 +04:00			`mainbus0 at root`
Add EXEC_AOUT and EXEC_SCRIPT. std.vax not needed anymore; removed. 1997-01-11 14:15:38 +03:00
Clean up all bus handling stuff, it has become a mess the latest years. Add a new bus; "ibus" that is the internal MicroVAX bus. 1999-08-07 14:36:43 +04:00			`# All buses; from the beginning attached to mainbus.`
			`abus0 at mainbus0 # Master bus on VAX 8600`
			`sbi0 at mainbus0 # SBI, master bus on 11/780.`
			`cmi0 at mainbus0 # 11/750 internal bus.`
			`bi0 at mainbus0 # VAX 8200`
			`vsbus0 at mainbus0 # All VAXstations`
			`ibus0 at mainbus0 # All Microvax`
			`#nbi0 at mainbus0 # VAX 8800`
			`#xmi0 at mainbus0 # VAX 6000`

			`# Vsbus, the virtual VAXstation bus, and possible devices.`
Support for ibus-attached LANCE. 1999-08-14 22:44:00 +04:00			`le0 at vsbus0 csr 0x200e0000 # LANCE ethernet`
Support for 4000/90. 1999-08-28 00:04:32 +04:00			`ze0 at vsbus0 csr 0x20008000 # SGEC ethernet`
Clean up all bus handling stuff, it has become a mess the latest years. Add a new bus; "ibus" that is the internal MicroVAX bus. 1999-08-07 14:36:43 +04:00			`dz0 at vsbus0 csr 0x200a0000 # DC-367 DZ-11 lookalike ctlr`
Support for 4000/90. 1999-08-28 00:04:32 +04:00			`dz0 at vsbus0 csr 0x25000000 # VS4000/90 serial line`
Clean up all bus handling stuff, it has become a mess the latest years. Add a new bus; "ibus" that is the internal MicroVAX bus. 1999-08-07 14:36:43 +04:00			`#hdc0 at vsbus0 csr 0x200c0000 # HDC9224 MFM/floppy ctlr`
			`ncr0 at vsbus0 csr 0x200c0080 # VS2000/3100 SCSI-ctlr`
			`ncr1 at vsbus0 csr 0x200c0180 # VS2000/3100 SCSI-ctlr`
			`smg0 at vsbus0 csr 0x200f0000 # Small monochrome display ctlr.`
			`#clr0 at vsbus0 csr 0x30000000 # 4- or 8-bitplans color graphics`

			`#rd* at hdc0 drive? # RD5x disks`
			`#ry* at hdc0 drive? # RX floppies`

			`# Ibus, the internal bus on most Microvaxen`
			`uba0 at ibus0 # Qbus adapter`
Add support for the SGEC. 1999-08-08 15:45:01 +04:00			`ze0 at ibus0 # SGEC on-board ethernet`
Clean up all bus handling stuff, it has become a mess the latest years. Add a new bus; "ibus" that is the internal MicroVAX bus. 1999-08-07 14:36:43 +04:00			`#shac0 at ibus0 # DSSI controller`
Update config files for VAX8200 and VAXstations. 1996-07-20 22:56:58 +04:00
			`# Devices connected at VAXBI`
Clean up all bus handling stuff, it has become a mess the latest years. Add a new bus; "ibus" that is the internal MicroVAX bus. 1999-08-07 14:36:43 +04:00			`cpu* at bi? node? # KA820/KA825 cpu`
			`mem* at bi? node? # Memory subsystems`
			`#uba* at bi? node? # DWBUA BI-Unibus adapter`
			`#ni* at bi? node? # DEBNA/DEBNT ethernet adapter`
			`#kdb* at bi? node? # KDB50 MSCP disk ctlr`
For now; don't include the devices that are not yet converted. 1999-08-04 23:15:56 +04:00			`#mscpbus* at kdb?`
Add another parent bus for 11/750 (cmi). remove mtc.c. 1996-08-20 18:05:16 +04:00
Clean up all bus handling stuff, it has become a mess the latest years. Add a new bus; "ibus" that is the internal MicroVAX bus. 1999-08-07 14:36:43 +04:00			`# CMI (VAX 11/750)`
			`mem* at cmi? tr? # Memory subsystems`
			`uba* at cmi? tr? # Unibus adapters`
			`mba* at cmi? tr? # Massbus adapters`
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00
Clean up all bus handling stuff, it has become a mess the latest years. Add a new bus; "ibus" that is the internal MicroVAX bus. 1999-08-07 14:36:43 +04:00			`# SBI (VAX 11/780, VAX 8600)`
			`sbi* at abus0 # VAX 8600 can have up to 4 SBI's.`

			`mem* at sbi? tr? # Memory subsystems`
			`uba* at sbi? tr? # Unibus adapters`
			`mba* at sbi? tr? # Massbus adapters`
Add VAX650, mba, hp, ts. Change uba to be *'ed. 1996-02-11 16:28:25 +03:00
			`# Devices on Massbus adapters`
Clean up all bus handling stuff, it has become a mess the latest years. Add a new bus; "ibus" that is the internal MicroVAX bus. 1999-08-07 14:36:43 +04:00			`hp* at mba? drive? # RM/RP disk drives`
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00
Clean up all bus handling stuff, it has become a mess the latest years. Add a new bus; "ibus" that is the internal MicroVAX bus. 1999-08-07 14:36:43 +04:00			`# Devices on Unibus/Qbus adapters`
Update to match new MSCP device handling. Remove support for old config system. 1996-07-02 01:07:25 +04:00			`uda0 at uba? csr 0172150 # UDA50/RQDX?`
Support for new CPU type (KA630 == uVAXII) added, tape driver. 1995-02-23 20:50:56 +03:00			`uda1 at uba? csr 0160334`
Update config files for VAX8200 and VAXstations. 1996-07-20 22:56:58 +04:00			`mtc0 at uba? csr 0174500 # Tape MSCP ctlr`
Clean up all bus handling stuff, it has become a mess the latest years. Add a new bus; "ibus" that is the internal MicroVAX bus. 1999-08-07 14:36:43 +04:00			`#ts0 at uba? csr 0172520 # TS11/TSV05 tape.`
			`#qd0 at uba? csr 0177400 # 4- or 8-bitplans color graphics`
			`#qv0 at uba? csr 0177400 # Monochrome graphics`
			`#de0 at uba? csr 0174510 # DELUA/DEUNA`
			`qe0 at uba? csr 0174440 # DEQNA/DELQA`
			`dhu0 at uba? csr 0160440 # DHU-11`
			`dz0 at uba? csr 0160100 # DZ-11`
			`dl0 at uba? csr 0176500 # DL-11`
Update to match new MSCP device handling. Remove support for old config system. 1996-07-02 01:07:25 +04:00
			`# MSCP devices`
Clean up all bus handling stuff, it has become a mess the latest years. Add a new bus; "ibus" that is the internal MicroVAX bus. 1999-08-07 14:36:43 +04:00			`mscpbus* at uda?`
			`mscpbus* at mtc?`
			`#mscpbus* at kdb?`

Update to match new MSCP device handling. Remove support for old config system. 1996-07-02 01:07:25 +04:00			`ra* at mscpbus? drive? # MSCP disk`
Split out MSCP floppies as a separate device (rx) instead of handling them as disk drives. It is now also allowed to change floppies without the system complaining :-) 1998-02-08 17:03:45 +03:00			`rx* at mscpbus? drive? # MSCP floppy`
Add MSCP tape to this file. 1996-07-11 03:51:53 +04:00			`mt* at mscpbus? drive? # MSCP tape`
Update to match new MSCP device handling. Remove support for old config system. 1996-07-02 01:07:25 +04:00
Update config files for VAX8200 and VAXstations. 1996-07-20 22:56:58 +04:00			`# VS2000 builtin MFM controller (HDC9224)`
Remove unneccessary file. Remove stale dependency. Disable not-working devices by default. 1998-05-22 13:59:55 +04:00			`#hdc0 at vsbus0 # The strange builtin MFM controller`
Update config files for VAX8200 and VAXstations. 1996-07-20 22:56:58 +04:00
Clean up all bus handling stuff, it has become a mess the latest years. Add a new bus; "ibus" that is the internal MicroVAX bus. 1999-08-07 14:36:43 +04:00			`# SCSI devices`
Change vsbus to take a locator for all devices. Figure out interrupt vector/mask on vsbus by forcing all devices to generate interrupts in the match routine, like on unibus. 1999-03-13 18:16:47 +03:00			`scsibus* at ncr?`
Update config files for VAX8200 and VAXstations. 1996-07-20 22:56:58 +04:00
Change vsbus to take a locator for all devices. Figure out interrupt vector/mask on vsbus by forcing all devices to generate interrupts in the match routine, like on unibus. 1999-03-13 18:16:47 +03:00			`sd* at scsibus? target? lun?`
			`st* at scsibus? target? lun?`
			`cd* at scsibus? target? lun?`
			`ch* at scsibus? target? lun?`
			`ss* at scsibus? target? lun?`
			`uk* at scsibus? target? lun?`
Update config files for VAX8200 and VAXstations. 1996-07-20 22:56:58 +04:00
Rudimentary support for the VS3100 builtin graphics console. 1998-06-04 19:51:12 +04:00			`# VAXstation graphics support`
Clean up all bus handling stuff, it has become a mess the latest years. Add a new bus; "ibus" that is the internal MicroVAX bus. 1999-08-07 14:36:43 +04:00			`wsdisplay0 at smg0`
			`#wsdisplay0 at clr0`
			`#wsdisplay0 at qd0`
			`#wsdisplay0 at qv0`
			`lkc0 at dz0`
Rudimentary support for the VS3100 builtin graphics console. 1998-06-04 19:51:12 +04:00
merge in changes from 1.1 release branch 1995-11-30 03:56:23 +03:00			`pseudo-device loop 1`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00			`pseudo-device pty 48`
bring in content of GENERIC.v6 into GENERIC. remove GENERIC.v6 file (as it is part of GENERIC now). "faith" interface is commented out by default as it is not really for general use. IPsec items are commented out as well, though we can enable "options IPSEC" without export-related issue ("options IPSEC" will enable authentication portion only). We may need to think about it again. if you have problem compiling with INET6 on archs I do not have access to, please contact me. XXX what to do with arch/arm32/SHARK{,.v6}? 1999-11-21 17:00:37 +03:00			`pseudo-device bpfilter 8 # Not supported by de yet.`
merge in changes from 1.1 release branch 1995-11-30 03:56:23 +03:00			`pseudo-device sl 2`
			`pseudo-device ppp 2`
			`pseudo-device tun 2`
bring in content of GENERIC.v6 into GENERIC. remove GENERIC.v6 file (as it is part of GENERIC now). "faith" interface is commented out by default as it is not really for general use. IPsec items are commented out as well, though we can enable "options IPSEC" without export-related issue ("options IPSEC" will enable authentication portion only). We may need to think about it again. if you have problem compiling with INET6 on archs I do not have access to, please contact me. XXX what to do with arch/arm32/SHARK{,.v6}? 1999-11-21 17:00:37 +03:00			`#pseudo-device gre 2 # generic L3 over IP tunnel`
			`pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)`
			`#pseudo-device faith 1 # IPv[46] tcp relay translation i/f`
merge in changes from 1.1 release branch 1995-11-30 03:56:23 +03:00			`pseudo-device tb 1`
			`pseudo-device vnd 4`
add 'pseudo-device ccd' where necessary; PR kern/1830. 1997-01-11 12:11:37 +03:00			`pseudo-device ccd 4`
Added a (commented out) configuration line for the RAIDframe device driver. 1998-11-16 19:44:55 +03:00			`#pseudo-device raid 4 # RAIDframe disk driver`
Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on the component auto-detection and auto-configuration of RAID sets. Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files. 2000-02-26 20:35:33 +03:00			`#options RAID_AUTOCONFIG # auto-configuration of RAID components`
add pseudo-device rnd, commented out 1997-11-20 11:11:14 +03:00			`# rnd is EXPERIMENTAL`
			`#pseudo-device rnd # /dev/random and in-kernel generator`