NetBSD/sys/arch/vax/conf/GENERIC

#	$NetBSD: GENERIC,v 1.41 1998/11/25 20:30:47 hwr Exp $
#
# GENERIC VAX configuration file; all supported devices.
#

include		"arch/vax/conf/std.vax"

# Here are all different supported CPU types listed.
options 	"VAX8600"
options 	"VAX8200"
options 	"VAX780"
options 	"VAX750"
options 	"VAX630"	# MV II
options 	"VAX650"	# MV III, 3600, 3800, 3900
options 	"VAX410"	# VS 2000
options 	"VAX43"		# VS 3100/76
options 	"VAX46"		# VS 4000/60

# Max users on system; this is just a hint
maxusers	8

# Kernel compiled-in symbolic debugger & system call tracer
#options 	DDB
#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
options 	KTRACE
#options 	DIAGNOSTIC

#options 	SCSIVERBOSE		# Verbose SCSI errors

# Network support
#options 	GATEWAY
options         INET

# All supported filesystem types
file-system 	FFS
file-system 	LFS
file-system 	MFS
file-system 	NFS
file-system 	FDESC
file-system 	KERNFS
file-system 	NULLFS
file-system 	PROCFS
file-system 	UMAPFS
file-system 	UNION

options 	QUOTA
#options 	FFS_EI		# FFS Endian Independant support
options 	NFSSERVER
options 	NFS_BOOT_BOOTPARAM	# Use the Sun way for netbooting.

# WS console uses SUN terminal emulation
options 	WSEMUL_SUN

# System V shared memory & semaphores support.
options 	SYSVMSG
options 	SYSVSEM
options 	SYSVSHM

# Old compat stuff; needed to run 4.3BSD Reno programs.
# Note that if COMPAT_ULTRIX is set, you lose compatibility with
# 4.3BSD Reno programs and get Ultrix compatibility instead.
# (They cannot coexist).
options 	COMPAT_VAX1K	# Must be present to run pre-1.4 binaries.
options 	COMPAT_43
options 	COMPAT_09
options 	COMPAT_10
options 	COMPAT_11
options 	COMPAT_12
options 	COMPAT_13
#options 	COMPAT_ULTRIX
options 	TCP_COMPAT_42

options 	LKM

# Kernel(s) to compile
config          netbsd root on ? type ?

mainbus0	at root

# Devices directly attached to mainbus.
cpu0		at mainbus0	# Only one CPU so far.
sbi*		at mainbus0	# SBI's are always at mainbus (Abus).
mem*		at mainbus0	# Some machines have memory at mainbus.
bi*		at mainbus0	# VAXBI bus
cmi0		at mainbus0	# 11/750 internal bus.
uba0		at mainbus0	# MicroVAXen only have QBUS.
vsbus0		at mainbus0	# Internal "virtual" VAXstation bus

# Devices connected at VAXBI
cpu0		at bi? node?	# KA820/KA825 cpu
cpu*		at bi? node?
mem*		at bi? node?	# Memory subsystems
uba*		at bi? node?	# DWBUA BI-Unibus adapter
#ni*		at bi? node?	# DEBNA/DEBNT ethernet adapter
kdb*		at bi? node?	# KDB50 MSCP disk ctlr
mscpbus*	at kdb?

# Devices connected at cmi
mem*		at cmi? tr?	# Memory subsystems
uba*		at cmi? tr?	# Unibus adapters
mba*		at cmi? tr?	# Massbus adapters

# Devices connected at sbi
mem*		at sbi? tr?	# Memory subsystems
uba*		at sbi? tr?	# Unibus adapters
mba*		at sbi? tr?	# Massbus adapters

# Devices on Massbus adapters
hp*		at mba? drive?	# RM/RP disk drives

# Disk controllers at Unibus
uda0		at uba?	csr 0172150	# UDA50/RQDX?
uda1		at uba?	csr 0160334
mscpbus*	at uda?

# Tape drivers
mtc0		at uba? csr 0174500	# Tape MSCP ctlr
mscpbus*	at mtc?

# MSCP devices
ra*		at mscpbus? drive?	# MSCP disk
rx*		at mscpbus? drive?	# MSCP floppy
mt*		at mscpbus? drive?	# MSCP tape

# Unibus tapes
#ts0		at uba? csr 0172520	# TS11/TSV05 tape.

# VS2000 builtin MFM controller (HDC9224)
#hdc0		at vsbus0		# The strange builtin MFM controller
#rd*		at hdc0 drive?		# The RD disk subsystem on VS2000

# VAXstation builtin SCSI-controller (NCR5380)
#ncr0		at vsbus0		# 1st built-in SCSI interface
#ncr1		at vsbus0		# 2nd built-in SCSI interface
#scsibus*	at ncr?

#sd*		at scsibus? target? lun?
#st*		at scsibus? target? lun?

# Graphic adapters.
qd0		at uba? csr 0177400

# Ethernet cards
de0		at uba? csr 0174510	# DELUA/DEUNA
qe0		at uba? csr 0174440	# DEQNA/DELQA
ln0		at vsbus0		# LANCE

# Terminal lines
dhu0		at uba? csr 0160440	# DHU-11
dz0		at uba? csr 0160100	# DZ-11
dz0		at vsbus0		# DC-367
dl0		at uba? csr 0176500	# DL-11

# VAXstation graphics support
smg0		at vsbus0		# Small monochrome display ctlr.
wsdisplay0	at smg0			# display device driver.
lkc0		at dz0			# Keyboard LK201

pseudo-device   loop	1
pseudo-device   pty	48
pseudo-device	bpfilter 8	# Not supported by de yet.
pseudo-device	sl	2
pseudo-device	ppp	2
pseudo-device	tun	2
#pseudo-device	gre		2	# generic L3 over IP tunnel
pseudo-device	tb	1
pseudo-device	vnd	4
pseudo-device	ccd	4
#pseudo-device	raid	4		# RAIDframe disk driver
# rnd is EXPERIMENTAL
#pseudo-device	rnd			# /dev/random and in-kernel generator
Add (commented out) 'gre' pseudo device line. Feedback is welcome. Inspired by Klaus Klein. 1998-11-25 23:30:44 +03:00			`# $NetBSD: GENERIC,v 1.41 1998/11/25 20:30:47 hwr Exp $`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00			`#`
Add VAX650, mba, hp, ts. Change uba to be *'ed. 1996-02-11 16:28:25 +03:00			`# GENERIC VAX configuration file; all supported devices.`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00			`#`

Support for DL11 (-compatible) async ctlr. Written by Ben Harris (bjh@mail.dotcom.fr). 1997-02-04 22:13:15 +03:00			`include "arch/vax/conf/std.vax"`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00			`# Here are all different supported CPU types listed.`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`options "VAX8600"`
			`options "VAX8200"`
			`options "VAX780"`
			`options "VAX750"`
			`options "VAX630" # MV II`
			`options "VAX650" # MV III, 3600, 3800, 3900`
			`options "VAX410" # VS 2000`
			`options "VAX43" # VS 3100/76`
VAX logical page size increased to 4k. 1998-08-21 17:46:38 +04:00			`options "VAX46" # VS 4000/60`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00			`# Max users on system; this is just a hint`
Add VAX650, mba, hp, ts. Change uba to be *'ed. 1996-02-11 16:28:25 +03:00			`maxusers 8`
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00
Support for tmscp tapes. 1995-03-30 02:50:47 +04:00			`# Kernel compiled-in symbolic debugger & system call tracer`
VAX logical page size increased to 4k. 1998-08-21 17:46:38 +04:00			`#options DDB`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`#options DDB_HISTORY_SIZE=100 # enable history editing in DDB`
			`options KTRACE`
			`#options DIAGNOSTIC`
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00
add a before tab to SCSIVERBOSE 1997-08-23 23:16:06 +04:00			`#options SCSIVERBOSE # Verbose SCSI errors`
add commented out reference SCSIVERBOSE option 1997-08-20 22:38:13 +04:00
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00			`# Network support`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`#options GATEWAY`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00			`options INET`
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00
			`# All supported filesystem types`
Adopt for new file system and root spec grammar. 1997-01-31 05:10:33 +03:00			`file-system FFS`
			`file-system LFS`
			`file-system MFS`
			`file-system NFS`
			`file-system FDESC`
			`file-system KERNFS`
			`file-system NULLFS`
			`file-system PROCFS`
			`file-system UMAPFS`
			`file-system UNION`

* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`options QUOTA`
Add commented out "options FFS_EI" 1998-03-18 19:34:41 +03:00			`#options FFS_EI # FFS Endian Independant support`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`options NFSSERVER`
Add support for QDSS graphic console. Code originated from 4.4BSD, ported to NetBSD by Boris Gjenero <bgjenero@undergrad.math.uwaterloo.ca> 1998-03-21 13:02:39 +03:00			`options NFS_BOOT_BOOTPARAM # Use the Sun way for netbooting.`

UVM default on vax for now. 1998-06-07 22:39:15 +04:00			`# WS console uses SUN terminal emulation`
			`options WSEMUL_SUN`
merge in changes from 1.1 release branch 1995-11-30 03:56:23 +03:00
			`# System V shared memory & semaphores support.`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`options SYSVMSG`
			`options SYSVSEM`
			`options SYSVSHM`
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00
Add VAX650, mba, hp, ts. Change uba to be *'ed. 1996-02-11 16:28:25 +03:00			`# Old compat stuff; needed to run 4.3BSD Reno programs.`
			`# Note that if COMPAT_ULTRIX is set, you lose compatibility with`
			`# 4.3BSD Reno programs and get Ultrix compatibility instead.`
			`# (They cannot coexist).`
VAX logical page size increased to 4k. 1998-08-21 17:46:38 +04:00			`options COMPAT_VAX1K # Must be present to run pre-1.4 binaries.`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`options COMPAT_43`
			`options COMPAT_09`
			`options COMPAT_10`
			`options COMPAT_11`
			`options COMPAT_12`
Add COMPAT_13. 1997-12-01 19:31:29 +03:00			`options COMPAT_13`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`#options COMPAT_ULTRIX`
			`options TCP_COMPAT_42`
Support for tmscp tapes. 1995-03-30 02:50:47 +04:00
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`options LKM`
Support for tmscp tapes. 1995-03-30 02:50:47 +04:00
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00			`# Kernel(s) to compile`
Adopt for new file system and root spec grammar. 1997-01-31 05:10:33 +03:00			`config netbsd root on ? type ?`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00
Change backplace0 to mainbus0 (for consistency with other ports). Remove unused function protocols from ka410.h and ka43.h Fix some ka46 missing references 1998-10-06 08:04:30 +04:00			`mainbus0 at root`
Add EXEC_AOUT and EXEC_SCRIPT. std.vax not needed anymore; removed. 1997-01-11 14:15:38 +03:00
Change backplace0 to mainbus0 (for consistency with other ports). Remove unused function protocols from ka410.h and ka43.h Fix some ka46 missing references 1998-10-06 08:04:30 +04:00			`# Devices directly attached to mainbus.`
			`cpu0 at mainbus0 # Only one CPU so far.`
			`sbi* at mainbus0 # SBI's are always at mainbus (Abus).`
			`mem* at mainbus0 # Some machines have memory at mainbus.`
			`bi* at mainbus0 # VAXBI bus`
			`cmi0 at mainbus0 # 11/750 internal bus.`
			`uba0 at mainbus0 # MicroVAXen only have QBUS.`
			`vsbus0 at mainbus0 # Internal "virtual" VAXstation bus`
Update config files for VAX8200 and VAXstations. 1996-07-20 22:56:58 +04:00
			`# Devices connected at VAXBI`
			`cpu0 at bi? node? # KA820/KA825 cpu`
Support for DWBUA (BI to Unibus adapter) and KLESI-B (TMSCP tape ctlr) added. 1998-10-18 22:47:18 +04:00			`cpu* at bi? node?`
Add another parent bus for 11/750 (cmi). remove mtc.c. 1996-08-20 18:05:16 +04:00			`mem* at bi? node? # Memory subsystems`
Support for DWBUA (BI to Unibus adapter) and KLESI-B (TMSCP tape ctlr) added. 1998-10-18 22:47:18 +04:00			`uba* at bi? node? # DWBUA BI-Unibus adapter`
Add another parent bus for 11/750 (cmi). remove mtc.c. 1996-08-20 18:05:16 +04:00			`#ni* at bi? node? # DEBNA/DEBNT ethernet adapter`
Update config files for VAX8200 and VAXstations. 1996-07-20 22:56:58 +04:00			`kdb* at bi? node? # KDB50 MSCP disk ctlr`
			`mscpbus* at kdb?`
Add another parent bus for 11/750 (cmi). remove mtc.c. 1996-08-20 18:05:16 +04:00
			`# Devices connected at cmi`
			`mem* at cmi? tr? # Memory subsystems`
			`uba* at cmi? tr? # Unibus adapters`
			`mba* at cmi? tr? # Massbus adapters`
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00
			`# Devices connected at sbi`
			`mem* at sbi? tr? # Memory subsystems`
Add VAX650, mba, hp, ts. Change uba to be *'ed. 1996-02-11 16:28:25 +03:00			`uba* at sbi? tr? # Unibus adapters`
			`mba* at sbi? tr? # Massbus adapters`

			`# Devices on Massbus adapters`
			`hp* at mba? drive? # RM/RP disk drives`
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00
			`# Disk controllers at Unibus`
Update to match new MSCP device handling. Remove support for old config system. 1996-07-02 01:07:25 +04:00			`uda0 at uba? csr 0172150 # UDA50/RQDX?`
Support for new CPU type (KA630 == uVAXII) added, tape driver. 1995-02-23 20:50:56 +03:00			`uda1 at uba? csr 0160334`
Update to match new MSCP device handling. Remove support for old config system. 1996-07-02 01:07:25 +04:00			`mscpbus* at uda?`

			`# Tape drivers`
Update config files for VAX8200 and VAXstations. 1996-07-20 22:56:58 +04:00			`mtc0 at uba? csr 0174500 # Tape MSCP ctlr`
Add MSCP tape to this file. 1996-07-11 03:51:53 +04:00			`mscpbus* at mtc?`
Update to match new MSCP device handling. Remove support for old config system. 1996-07-02 01:07:25 +04:00
			`# MSCP devices`
			`ra* at mscpbus? drive? # MSCP disk`
Split out MSCP floppies as a separate device (rx) instead of handling them as disk drives. It is now also allowed to change floppies without the system complaining :-) 1998-02-08 17:03:45 +03:00			`rx* at mscpbus? drive? # MSCP floppy`
Add MSCP tape to this file. 1996-07-11 03:51:53 +04:00			`mt* at mscpbus? drive? # MSCP tape`
Update to match new MSCP device handling. Remove support for old config system. 1996-07-02 01:07:25 +04:00
			`# Unibus tapes`
Add EXEC_AOUT and EXEC_SCRIPT. std.vax not needed anymore; removed. 1997-01-11 14:15:38 +03:00			`#ts0 at uba? csr 0172520 # TS11/TSV05 tape.`
Update config files for VAX8200 and VAXstations. 1996-07-20 22:56:58 +04:00
			`# VS2000 builtin MFM controller (HDC9224)`
Remove unneccessary file. Remove stale dependency. Disable not-working devices by default. 1998-05-22 13:59:55 +04:00			`#hdc0 at vsbus0 # The strange builtin MFM controller`
			`#rd* at hdc0 drive? # The RD disk subsystem on VS2000`
Update config files for VAX8200 and VAXstations. 1996-07-20 22:56:58 +04:00
			`# VAXstation builtin SCSI-controller (NCR5380)`
Remove unneccessary file. Remove stale dependency. Disable not-working devices by default. 1998-05-22 13:59:55 +04:00			`#ncr0 at vsbus0 # 1st built-in SCSI interface`
			`#ncr1 at vsbus0 # 2nd built-in SCSI interface`
			`#scsibus* at ncr?`
Update config files for VAX8200 and VAXstations. 1996-07-20 22:56:58 +04:00
Remove unneccessary file. Remove stale dependency. Disable not-working devices by default. 1998-05-22 13:59:55 +04:00			`#sd* at scsibus? target? lun?`
			`#st* at scsibus? target? lun?`
Update config files for VAX8200 and VAXstations. 1996-07-20 22:56:58 +04:00
Add support for QDSS graphic console. Code originated from 4.4BSD, ported to NetBSD by Boris Gjenero <bgjenero@undergrad.math.uwaterloo.ca> 1998-03-21 13:02:39 +03:00			`# Graphic adapters.`
			`qd0 at uba? csr 0177400`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00
Program to make a fast convert from new to old config (Ugly!) 1995-02-13 03:41:55 +03:00			`# Ethernet cards`
Add VAX650, mba, hp, ts. Change uba to be *'ed. 1996-02-11 16:28:25 +03:00			`de0 at uba? csr 0174510 # DELUA/DEUNA`
			`qe0 at uba? csr 0174440 # DEQNA/DELQA`
Add support for QDSS graphic console. Code originated from 4.4BSD, ported to NetBSD by Boris Gjenero <bgjenero@undergrad.math.uwaterloo.ca> 1998-03-21 13:02:39 +03:00			`ln0 at vsbus0 # LANCE`
Support for new CPU type (KA630 == uVAXII) added, tape driver. 1995-02-23 20:50:56 +03:00
Add VAX780 and DHU11 to the GENERIC file. Put the corresponding file lines in files.vax. 1996-03-02 17:19:47 +03:00			`# Terminal lines`
			`dhu0 at uba? csr 0160440 # DHU-11`
Add DZ-11 to GENERIC & files.vax. 1996-05-19 20:25:23 +04:00			`dz0 at uba? csr 0160100 # DZ-11`
Remove unneccessary file. Remove stale dependency. Disable not-working devices by default. 1998-05-22 13:59:55 +04:00			`dz0 at vsbus0 # DC-367`
Support for DL11 (-compatible) async ctlr. Written by Ben Harris (bjh@mail.dotcom.fr). 1997-02-04 22:13:15 +03:00			`dl0 at uba? csr 0176500 # DL-11`
Add VAX780 and DHU11 to the GENERIC file. Put the corresponding file lines in files.vax. 1996-03-02 17:19:47 +03:00
Rudimentary support for the VS3100 builtin graphics console. 1998-06-04 19:51:12 +04:00			`# VAXstation graphics support`
			`smg0 at vsbus0 # Small monochrome display ctlr.`
			`wsdisplay0 at smg0 # display device driver.`
			`lkc0 at dz0 # Keyboard LK201`

merge in changes from 1.1 release branch 1995-11-30 03:56:23 +03:00			`pseudo-device loop 1`
Initial VAX port merging. 1994-08-03 00:18:46 +04:00			`pseudo-device pty 48`
Rudimentary support for the VS3100 builtin graphics console. 1998-06-04 19:51:12 +04:00			`pseudo-device bpfilter 8 # Not supported by de yet.`
merge in changes from 1.1 release branch 1995-11-30 03:56:23 +03:00			`pseudo-device sl 2`
			`pseudo-device ppp 2`
			`pseudo-device tun 2`
Add (commented out) 'gre' pseudo device line. Feedback is welcome. Inspired by Klaus Klein. 1998-11-25 23:30:44 +03:00			`#pseudo-device gre 2 # generic L3 over IP tunnel`
merge in changes from 1.1 release branch 1995-11-30 03:56:23 +03:00			`pseudo-device tb 1`
			`pseudo-device vnd 4`
add 'pseudo-device ccd' where necessary; PR kern/1830. 1997-01-11 12:11:37 +03:00			`pseudo-device ccd 4`
Added a (commented out) configuration line for the RAIDframe device driver. 1998-11-16 19:44:55 +03:00			`#pseudo-device raid 4 # RAIDframe disk driver`
add pseudo-device rnd, commented out 1997-11-20 11:11:14 +03:00			`# rnd is EXPERIMENTAL`
			`#pseudo-device rnd # /dev/random and in-kernel generator`