2005-01-15 18:19:51 +03:00
|
|
|
/* $NetBSD: cmpci.c,v 1.28 2005/01/15 15:19:52 kent Exp $ */
|
2000-05-01 01:59:58 +04:00
|
|
|
|
|
|
|
/*
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
* Copyright (c) 2000, 2001 The NetBSD Foundation, Inc.
|
2000-05-01 01:59:58 +04:00
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
2003-12-04 16:57:30 +03:00
|
|
|
* by Takuya SHIOZAKI <tshiozak@NetBSD.org> .
|
2000-05-01 01:59:58 +04:00
|
|
|
*
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
|
|
* by ITOH Yasufumi.
|
|
|
|
*
|
2000-05-01 01:59:58 +04:00
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* C-Media CMI8x38 Audio Chip Support.
|
|
|
|
*
|
|
|
|
* TODO:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
* - 4ch / 6ch support.
|
|
|
|
* - Joystick support.
|
2000-05-01 01:59:58 +04:00
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
2001-11-13 10:48:40 +03:00
|
|
|
#include <sys/cdefs.h>
|
2005-01-15 18:19:51 +03:00
|
|
|
__KERNEL_RCSID(0, "$NetBSD: cmpci.c,v 1.28 2005/01/15 15:19:52 kent Exp $");
|
2001-11-13 10:48:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
#if defined(AUDIO_DEBUG) || defined(DEBUG)
|
2001-02-12 21:47:12 +03:00
|
|
|
#define DPRINTF(x) if (cmpcidebug) printf x
|
|
|
|
int cmpcidebug = 0;
|
2000-05-01 01:59:58 +04:00
|
|
|
#else
|
|
|
|
#define DPRINTF(x)
|
|
|
|
#endif
|
|
|
|
|
2001-09-04 17:36:07 +04:00
|
|
|
#include "mpu.h"
|
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/device.h>
|
|
|
|
#include <sys/proc.h>
|
|
|
|
|
|
|
|
#include <dev/pci/pcidevs.h>
|
|
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
|
|
|
|
#include <sys/audioio.h>
|
|
|
|
#include <dev/audio_if.h>
|
|
|
|
#include <dev/midi_if.h>
|
|
|
|
|
|
|
|
#include <dev/mulaw.h>
|
|
|
|
#include <dev/auconv.h>
|
|
|
|
#include <dev/pci/cmpcireg.h>
|
|
|
|
#include <dev/pci/cmpcivar.h>
|
|
|
|
|
|
|
|
#include <dev/ic/mpuvar.h>
|
|
|
|
#include <machine/bus.h>
|
|
|
|
#include <machine/intr.h>
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Low-level HW interface
|
|
|
|
*/
|
2005-01-15 18:19:51 +03:00
|
|
|
static __inline uint8_t cmpci_mixerreg_read(struct cmpci_softc *, uint8_t);
|
|
|
|
static __inline void cmpci_mixerreg_write(struct cmpci_softc *,
|
|
|
|
uint8_t, uint8_t);
|
|
|
|
static __inline void cmpci_reg_partial_write_1(struct cmpci_softc *, int, int,
|
|
|
|
unsigned, unsigned);
|
|
|
|
static __inline void cmpci_reg_partial_write_4(struct cmpci_softc *, int, int,
|
|
|
|
uint32_t, uint32_t);
|
|
|
|
static __inline void cmpci_reg_set_1(struct cmpci_softc *, int, uint8_t);
|
|
|
|
static __inline void cmpci_reg_clear_1(struct cmpci_softc *, int, uint8_t);
|
|
|
|
static __inline void cmpci_reg_set_4(struct cmpci_softc *, int, uint32_t);
|
|
|
|
static __inline void cmpci_reg_clear_4(struct cmpci_softc *, int, uint32_t);
|
|
|
|
static __inline void cmpci_reg_set_reg_misc(struct cmpci_softc *, uint32_t);
|
|
|
|
static __inline void cmpci_reg_clear_reg_misc(struct cmpci_softc *, uint32_t);
|
|
|
|
static int cmpci_rate_to_index(int);
|
|
|
|
static __inline int cmpci_index_to_rate(int);
|
|
|
|
static __inline int cmpci_index_to_divider(int);
|
|
|
|
|
|
|
|
static int cmpci_adjust(int, int);
|
|
|
|
static void cmpci_set_mixer_gain(struct cmpci_softc *, int);
|
|
|
|
static void cmpci_set_out_ports(struct cmpci_softc *);
|
|
|
|
static int cmpci_set_in_ports(struct cmpci_softc *);
|
2000-05-01 01:59:58 +04:00
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* autoconf interface
|
|
|
|
*/
|
2005-01-15 18:19:51 +03:00
|
|
|
static int cmpci_match(struct device *, struct cfdata *, void *);
|
|
|
|
static void cmpci_attach(struct device *, struct device *, void *);
|
2000-05-01 01:59:58 +04:00
|
|
|
|
2002-10-01 00:37:04 +04:00
|
|
|
CFATTACH_DECL(cmpci, sizeof (struct cmpci_softc),
|
2002-10-02 20:50:59 +04:00
|
|
|
cmpci_match, cmpci_attach, NULL, NULL);
|
2000-05-01 01:59:58 +04:00
|
|
|
|
|
|
|
/* interrupt */
|
2005-01-15 18:19:51 +03:00
|
|
|
static int cmpci_intr(void *);
|
2000-05-01 01:59:58 +04:00
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* DMA stuffs
|
|
|
|
*/
|
2005-01-15 18:19:51 +03:00
|
|
|
static int cmpci_alloc_dmamem(struct cmpci_softc *, size_t,
|
|
|
|
struct malloc_type *, int, caddr_t *);
|
|
|
|
static int cmpci_free_dmamem(struct cmpci_softc *, caddr_t,
|
|
|
|
struct malloc_type *);
|
|
|
|
static struct cmpci_dmanode * cmpci_find_dmamem(struct cmpci_softc *,
|
|
|
|
caddr_t);
|
2000-05-01 01:59:58 +04:00
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* interface to machine independent layer
|
|
|
|
*/
|
2005-01-15 18:19:51 +03:00
|
|
|
static int cmpci_query_encoding(void *, struct audio_encoding *);
|
|
|
|
static int cmpci_set_params(void *, int, int, audio_params_t *,
|
|
|
|
audio_params_t *, stream_filter_list_t *, stream_filter_list_t *);
|
|
|
|
static int cmpci_round_blocksize(void *, int, int, const audio_params_t *);
|
|
|
|
static int cmpci_halt_output(void *);
|
|
|
|
static int cmpci_halt_input(void *);
|
|
|
|
static int cmpci_getdev(void *, struct audio_device *);
|
|
|
|
static int cmpci_set_port(void *, mixer_ctrl_t *);
|
|
|
|
static int cmpci_get_port(void *, mixer_ctrl_t *);
|
|
|
|
static int cmpci_query_devinfo(void *, mixer_devinfo_t *);
|
|
|
|
static void *cmpci_allocm(void *, int, size_t, struct malloc_type *, int);
|
|
|
|
static void cmpci_freem(void *, void *, struct malloc_type *);
|
|
|
|
static size_t cmpci_round_buffersize(void *, int, size_t);
|
|
|
|
static paddr_t cmpci_mappage(void *, void *, off_t, int);
|
|
|
|
static int cmpci_get_props(void *);
|
|
|
|
static int cmpci_trigger_output(void *, void *, void *, int,
|
|
|
|
void (*)(void *), void *, const audio_params_t *);
|
|
|
|
static int cmpci_trigger_input(void *, void *, void *, int,
|
|
|
|
void (*)(void *), void *, const audio_params_t *);
|
2000-05-01 01:59:58 +04:00
|
|
|
|
2004-10-29 16:57:15 +04:00
|
|
|
static const struct audio_hw_if cmpci_hw_if = {
|
merge kent-audio1 branch, which introduces audio filter pipeline to the MI
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
|
|
|
NULL, /* open */
|
|
|
|
NULL, /* close */
|
2000-05-01 01:59:58 +04:00
|
|
|
NULL, /* drain */
|
2000-06-09 02:15:52 +04:00
|
|
|
cmpci_query_encoding, /* query_encoding */
|
|
|
|
cmpci_set_params, /* set_params */
|
|
|
|
cmpci_round_blocksize, /* round_blocksize */
|
2000-05-01 01:59:58 +04:00
|
|
|
NULL, /* commit_settings */
|
|
|
|
NULL, /* init_output */
|
|
|
|
NULL, /* init_input */
|
|
|
|
NULL, /* start_output */
|
|
|
|
NULL, /* start_input */
|
2000-06-09 02:15:52 +04:00
|
|
|
cmpci_halt_output, /* halt_output */
|
|
|
|
cmpci_halt_input, /* halt_input */
|
2000-05-01 01:59:58 +04:00
|
|
|
NULL, /* speaker_ctl */
|
2000-06-09 02:15:52 +04:00
|
|
|
cmpci_getdev, /* getdev */
|
2000-05-01 01:59:58 +04:00
|
|
|
NULL, /* setfd */
|
2000-06-09 02:15:52 +04:00
|
|
|
cmpci_set_port, /* set_port */
|
|
|
|
cmpci_get_port, /* get_port */
|
|
|
|
cmpci_query_devinfo, /* query_devinfo */
|
|
|
|
cmpci_allocm, /* allocm */
|
|
|
|
cmpci_freem, /* freem */
|
|
|
|
cmpci_round_buffersize,/* round_buffersize */
|
|
|
|
cmpci_mappage, /* mappage */
|
|
|
|
cmpci_get_props, /* get_props */
|
|
|
|
cmpci_trigger_output, /* trigger_output */
|
2001-10-03 04:04:47 +04:00
|
|
|
cmpci_trigger_input, /* trigger_input */
|
|
|
|
NULL, /* dev_ioctl */
|
2000-05-01 01:59:58 +04:00
|
|
|
};
|
|
|
|
|
merge kent-audio1 branch, which introduces audio filter pipeline to the MI
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
|
|
|
#define CMPCI_NFORMATS 4
|
|
|
|
static const struct audio_format cmpci_formats[CMPCI_NFORMATS] = {
|
|
|
|
{NULL, AUMODE_PLAY | AUMODE_RECORD, AUDIO_ENCODING_SLINEAR_LE, 16, 16,
|
|
|
|
2, AUFMT_STEREO, 0, {5512, 48000}},
|
|
|
|
{NULL, AUMODE_PLAY | AUMODE_RECORD, AUDIO_ENCODING_SLINEAR_LE, 16, 16,
|
|
|
|
1, AUFMT_MONAURAL, 0, {5512, 48000}},
|
|
|
|
{NULL, AUMODE_PLAY | AUMODE_RECORD, AUDIO_ENCODING_ULINEAR_LE, 8, 8,
|
|
|
|
2, AUFMT_STEREO, 0, {5512, 48000}},
|
|
|
|
{NULL, AUMODE_PLAY | AUMODE_RECORD, AUDIO_ENCODING_ULINEAR_LE, 8, 8,
|
|
|
|
1, AUFMT_MONAURAL, 0, {5512, 48000}},
|
|
|
|
};
|
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Low-level HW interface
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* mixer register read/write */
|
|
|
|
static __inline uint8_t
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_mixerreg_read(struct cmpci_softc *sc, uint8_t no)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
|
|
|
uint8_t ret;
|
|
|
|
|
|
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, CMPCI_REG_SBADDR, no);
|
|
|
|
delay(10);
|
|
|
|
ret = bus_space_read_1(sc->sc_iot, sc->sc_ioh, CMPCI_REG_SBDATA);
|
|
|
|
delay(10);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_mixerreg_write(struct cmpci_softc *sc, uint8_t no, uint8_t val)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, CMPCI_REG_SBADDR, no);
|
|
|
|
delay(10);
|
|
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, CMPCI_REG_SBDATA, val);
|
|
|
|
delay(10);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/* register partial write */
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
static __inline void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_reg_partial_write_1(struct cmpci_softc *sc, int no, int shift,
|
|
|
|
unsigned mask, unsigned val)
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, no,
|
|
|
|
(val<<shift) |
|
|
|
|
(bus_space_read_1(sc->sc_iot, sc->sc_ioh, no) & ~(mask<<shift)));
|
|
|
|
delay(10);
|
|
|
|
}
|
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
static __inline void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_reg_partial_write_4(struct cmpci_softc *sc, int no, int shift,
|
|
|
|
uint32_t mask, uint32_t val)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
bus_space_write_4(sc->sc_iot, sc->sc_ioh, no,
|
|
|
|
(val<<shift) |
|
|
|
|
(bus_space_read_4(sc->sc_iot, sc->sc_ioh, no) & ~(mask<<shift)));
|
|
|
|
delay(10);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* register set/clear bit */
|
2001-02-12 21:47:12 +03:00
|
|
|
static __inline void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_reg_set_1(struct cmpci_softc *sc, int no, uint8_t mask)
|
2001-02-12 21:47:12 +03:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2001-02-12 21:47:12 +03:00
|
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, no,
|
|
|
|
(bus_space_read_1(sc->sc_iot, sc->sc_ioh, no) | mask));
|
|
|
|
delay(10);
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_reg_clear_1(struct cmpci_softc *sc, int no, uint8_t mask)
|
2001-02-12 21:47:12 +03:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2001-02-12 21:47:12 +03:00
|
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, no,
|
|
|
|
(bus_space_read_1(sc->sc_iot, sc->sc_ioh, no) & ~mask));
|
|
|
|
delay(10);
|
|
|
|
}
|
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
static __inline void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_reg_set_4(struct cmpci_softc *sc, int no, uint32_t mask)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2003-11-22 19:48:14 +03:00
|
|
|
/* use cmpci_reg_set_reg_misc() for CMPCI_REG_MISC */
|
|
|
|
KDASSERT(no != CMPCI_REG_MISC);
|
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
bus_space_write_4(sc->sc_iot, sc->sc_ioh, no,
|
2001-02-12 21:47:12 +03:00
|
|
|
(bus_space_read_4(sc->sc_iot, sc->sc_ioh, no) | mask));
|
2000-05-01 01:59:58 +04:00
|
|
|
delay(10);
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_reg_clear_4(struct cmpci_softc *sc, int no, uint32_t mask)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2003-11-22 19:48:14 +03:00
|
|
|
/* use cmpci_reg_clear_reg_misc() for CMPCI_REG_MISC */
|
|
|
|
KDASSERT(no != CMPCI_REG_MISC);
|
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
bus_space_write_4(sc->sc_iot, sc->sc_ioh, no,
|
2001-02-12 21:47:12 +03:00
|
|
|
(bus_space_read_4(sc->sc_iot, sc->sc_ioh, no) & ~mask));
|
2000-05-01 01:59:58 +04:00
|
|
|
delay(10);
|
|
|
|
}
|
|
|
|
|
2003-11-22 19:48:14 +03:00
|
|
|
/*
|
|
|
|
* The CMPCI_REG_MISC register needs special handling, since one of
|
|
|
|
* its bits has different read/write values.
|
|
|
|
*/
|
|
|
|
static __inline void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_reg_set_reg_misc(struct cmpci_softc *sc, uint32_t mask)
|
2003-11-22 19:48:14 +03:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2003-11-22 19:48:14 +03:00
|
|
|
sc->sc_reg_misc |= mask;
|
|
|
|
bus_space_write_4(sc->sc_iot, sc->sc_ioh, CMPCI_REG_MISC,
|
|
|
|
sc->sc_reg_misc);
|
|
|
|
delay(10);
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_reg_clear_reg_misc(struct cmpci_softc *sc, uint32_t mask)
|
2003-11-22 19:48:14 +03:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2003-11-22 19:48:14 +03:00
|
|
|
sc->sc_reg_misc &= ~mask;
|
|
|
|
bus_space_write_4(sc->sc_iot, sc->sc_ioh, CMPCI_REG_MISC,
|
|
|
|
sc->sc_reg_misc);
|
|
|
|
delay(10);
|
|
|
|
}
|
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
/* rate */
|
2001-01-18 23:28:15 +03:00
|
|
|
static const struct {
|
2000-05-01 01:59:58 +04:00
|
|
|
int rate;
|
|
|
|
int divider;
|
|
|
|
} cmpci_rate_table[CMPCI_REG_NUMRATE] = {
|
|
|
|
#define _RATE(n) { n, CMPCI_REG_RATE_ ## n }
|
|
|
|
_RATE(5512),
|
|
|
|
_RATE(8000),
|
|
|
|
_RATE(11025),
|
|
|
|
_RATE(16000),
|
|
|
|
_RATE(22050),
|
|
|
|
_RATE(32000),
|
|
|
|
_RATE(44100),
|
|
|
|
_RATE(48000)
|
2001-02-12 21:47:12 +03:00
|
|
|
#undef _RATE
|
2000-05-01 01:59:58 +04:00
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_rate_to_index(int rate)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
|
|
|
int i;
|
|
|
|
|
2002-02-02 14:18:42 +03:00
|
|
|
for (i = 0; i < CMPCI_REG_NUMRATE - 1; i++)
|
2000-05-01 01:59:58 +04:00
|
|
|
if (rate <=
|
|
|
|
(cmpci_rate_table[i].rate+cmpci_rate_table[i+1].rate) / 2)
|
|
|
|
return i;
|
|
|
|
return i; /* 48000 */
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_index_to_rate(int index)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
return cmpci_rate_table[index].rate;
|
|
|
|
}
|
|
|
|
|
|
|
|
static __inline int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_index_to_divider(int index)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
return cmpci_rate_table[index].divider;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* interface to configure the device.
|
|
|
|
*/
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_match(struct device *parent, struct cfdata *match, void *aux)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
struct pci_attach_args *pa;
|
2000-05-01 01:59:58 +04:00
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
pa = (struct pci_attach_args *)aux;
|
2000-05-01 01:59:58 +04:00
|
|
|
if ( PCI_VENDOR(pa->pa_id) == PCI_VENDOR_CMEDIA &&
|
|
|
|
(PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_CMEDIA_CMI8338A ||
|
|
|
|
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_CMEDIA_CMI8338B ||
|
2001-02-12 21:47:12 +03:00
|
|
|
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_CMEDIA_CMI8738 ||
|
|
|
|
PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_CMEDIA_CMI8738B) )
|
2000-05-01 01:59:58 +04:00
|
|
|
return 1;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_attach(struct device *parent, struct device *self, void *aux)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
struct cmpci_softc *sc;
|
|
|
|
struct pci_attach_args *pa;
|
2001-09-04 17:36:07 +04:00
|
|
|
struct audio_attach_args aa;
|
2000-05-01 01:59:58 +04:00
|
|
|
pci_intr_handle_t ih;
|
|
|
|
char const *strintr;
|
2001-02-12 21:47:12 +03:00
|
|
|
char devinfo[256];
|
2000-05-01 01:59:58 +04:00
|
|
|
int i, v;
|
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
sc = (struct cmpci_softc *)self;
|
|
|
|
pa = (struct pci_attach_args *)aux;
|
2003-01-31 03:07:39 +03:00
|
|
|
aprint_naive(": Audio controller\n");
|
|
|
|
|
2001-02-12 21:47:12 +03:00
|
|
|
sc->sc_id = pa->pa_id;
|
|
|
|
sc->sc_class = pa->pa_class;
|
2004-04-24 01:13:05 +04:00
|
|
|
pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo, sizeof(devinfo));
|
2003-01-31 03:07:39 +03:00
|
|
|
aprint_normal(": %s (rev. 0x%02x)\n", devinfo,
|
|
|
|
PCI_REVISION(sc->sc_class));
|
2001-02-12 21:47:12 +03:00
|
|
|
switch (PCI_PRODUCT(sc->sc_id)) {
|
2000-05-01 01:59:58 +04:00
|
|
|
case PCI_PRODUCT_CMEDIA_CMI8338A:
|
2001-02-12 21:47:12 +03:00
|
|
|
/*FALLTHROUGH*/
|
2000-05-01 01:59:58 +04:00
|
|
|
case PCI_PRODUCT_CMEDIA_CMI8338B:
|
2001-02-12 21:47:12 +03:00
|
|
|
sc->sc_capable = CMPCI_CAP_CMI8338;
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
|
|
|
case PCI_PRODUCT_CMEDIA_CMI8738:
|
2001-02-12 21:47:12 +03:00
|
|
|
/*FALLTHROUGH*/
|
|
|
|
case PCI_PRODUCT_CMEDIA_CMI8738B:
|
|
|
|
sc->sc_capable = CMPCI_CAP_CMI8738;
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2000-05-01 02:16:56 +04:00
|
|
|
/* map I/O space */
|
2000-05-01 01:59:58 +04:00
|
|
|
if (pci_mapreg_map(pa, CMPCI_PCI_IOBASEREG, PCI_MAPREG_TYPE_IO, 0,
|
2001-02-12 21:47:12 +03:00
|
|
|
&sc->sc_iot, &sc->sc_ioh, NULL, NULL)) {
|
2003-01-31 03:07:39 +03:00
|
|
|
aprint_error("%s: failed to map I/O space\n",
|
|
|
|
sc->sc_dev.dv_xname);
|
2000-05-01 01:59:58 +04:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2000-05-01 02:16:56 +04:00
|
|
|
/* interrupt */
|
2000-12-29 01:59:06 +03:00
|
|
|
if (pci_intr_map(pa, &ih)) {
|
2003-01-31 03:07:39 +03:00
|
|
|
aprint_error("%s: failed to map interrupt\n",
|
|
|
|
sc->sc_dev.dv_xname);
|
2000-05-01 01:59:58 +04:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
strintr = pci_intr_string(pa->pa_pc, ih);
|
|
|
|
sc->sc_ih=pci_intr_establish(pa->pa_pc, ih, IPL_AUDIO, cmpci_intr, sc);
|
|
|
|
if (sc->sc_ih == NULL) {
|
2003-01-31 03:07:39 +03:00
|
|
|
aprint_error("%s: failed to establish interrupt",
|
2000-05-01 01:59:58 +04:00
|
|
|
sc->sc_dev.dv_xname);
|
|
|
|
if (strintr != NULL)
|
2003-01-31 03:07:39 +03:00
|
|
|
aprint_normal(" at %s", strintr);
|
|
|
|
aprint_normal("\n");
|
2000-05-01 01:59:58 +04:00
|
|
|
return;
|
|
|
|
}
|
2003-01-31 03:07:39 +03:00
|
|
|
aprint_normal("%s: interrupting at %s\n", sc->sc_dev.dv_xname, strintr);
|
2000-05-01 01:59:58 +04:00
|
|
|
|
|
|
|
sc->sc_dmat = pa->pa_dmat;
|
|
|
|
|
|
|
|
audio_attach_mi(&cmpci_hw_if, sc, &sc->sc_dev);
|
|
|
|
|
2001-09-04 17:36:07 +04:00
|
|
|
/* attach OPL device */
|
|
|
|
aa.type = AUDIODEV_TYPE_OPL;
|
|
|
|
aa.hwif = NULL;
|
|
|
|
aa.hdl = NULL;
|
|
|
|
(void)config_found(&sc->sc_dev, &aa, audioprint);
|
|
|
|
|
|
|
|
/* attach MPU-401 device */
|
|
|
|
aa.type = AUDIODEV_TYPE_MPU;
|
|
|
|
aa.hwif = NULL;
|
|
|
|
aa.hdl = NULL;
|
|
|
|
if (bus_space_subregion(sc->sc_iot, sc->sc_ioh,
|
|
|
|
CMPCI_REG_MPU_BASE, CMPCI_REG_MPU_SIZE, &sc->sc_mpu_ioh) == 0)
|
|
|
|
sc->sc_mpudev = config_found(&sc->sc_dev, &aa, audioprint);
|
|
|
|
|
2003-11-22 19:48:14 +03:00
|
|
|
/* get initial value (this is 0 and may be omitted but just in case) */
|
|
|
|
sc->sc_reg_misc = bus_space_read_4(sc->sc_iot, sc->sc_ioh,
|
|
|
|
CMPCI_REG_MISC) & ~CMPCI_REG_SPDIF48K;
|
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
cmpci_mixerreg_write(sc, CMPCI_SB16_MIXER_RESET, 0);
|
|
|
|
cmpci_mixerreg_write(sc, CMPCI_SB16_MIXER_ADCMIX_L, 0);
|
|
|
|
cmpci_mixerreg_write(sc, CMPCI_SB16_MIXER_ADCMIX_R, 0);
|
|
|
|
cmpci_mixerreg_write(sc, CMPCI_SB16_MIXER_OUTMIX,
|
|
|
|
CMPCI_SB16_SW_CD|CMPCI_SB16_SW_MIC | CMPCI_SB16_SW_LINE);
|
|
|
|
for (i = 0; i < CMPCI_NDEVS; i++) {
|
|
|
|
switch(i) {
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
/*
|
|
|
|
* CMI8738 defaults are
|
|
|
|
* master: 0xe0 (0x00 - 0xf8)
|
2001-12-27 17:17:04 +03:00
|
|
|
* FM, DAC: 0xc0 (0x00 - 0xf8)
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
* PC speaker: 0x80 (0x00 - 0xc0)
|
|
|
|
* others: 0
|
|
|
|
*/
|
|
|
|
/* volume */
|
2001-09-04 17:36:07 +04:00
|
|
|
case CMPCI_MASTER_VOL:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
v = 128; /* 224 */
|
|
|
|
break;
|
2001-09-04 17:36:07 +04:00
|
|
|
case CMPCI_FM_VOL:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_DAC_VOL:
|
|
|
|
v = 192;
|
2001-09-04 17:36:07 +04:00
|
|
|
break;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_PCSPEAKER:
|
|
|
|
v = 128;
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
2001-09-04 17:36:07 +04:00
|
|
|
|
|
|
|
/* booleans, set to true */
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_CD_MUTE:
|
|
|
|
case CMPCI_MIC_MUTE:
|
|
|
|
case CMPCI_LINE_IN_MUTE:
|
|
|
|
case CMPCI_AUX_IN_MUTE:
|
2001-09-04 17:36:07 +04:00
|
|
|
v = 1;
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
|
|
|
/* volume with inital value 0 */
|
|
|
|
case CMPCI_CD_VOL:
|
|
|
|
case CMPCI_LINE_IN_VOL:
|
|
|
|
case CMPCI_AUX_IN_VOL:
|
|
|
|
case CMPCI_MIC_VOL:
|
|
|
|
case CMPCI_MIC_RECVOL:
|
|
|
|
/* FALLTHROUGH */
|
|
|
|
|
2001-09-04 17:36:07 +04:00
|
|
|
/* others are cleared */
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_MIC_PREAMP:
|
2001-09-04 17:36:07 +04:00
|
|
|
case CMPCI_RECORD_SOURCE:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_PLAYBACK_MODE:
|
|
|
|
case CMPCI_SPDIF_IN_SELECT:
|
|
|
|
case CMPCI_SPDIF_IN_PHASE:
|
2001-02-12 21:47:12 +03:00
|
|
|
case CMPCI_SPDIF_LOOP:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_SPDIF_OUT_PLAYBACK:
|
2001-02-12 21:47:12 +03:00
|
|
|
case CMPCI_SPDIF_OUT_VOLTAGE:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_MONITOR_DAC:
|
2001-02-12 21:47:12 +03:00
|
|
|
case CMPCI_REAR:
|
|
|
|
case CMPCI_INDIVIDUAL:
|
|
|
|
case CMPCI_REVERSE:
|
|
|
|
case CMPCI_SURROUND:
|
2001-09-04 17:36:07 +04:00
|
|
|
default:
|
2000-05-01 01:59:58 +04:00
|
|
|
v = 0;
|
|
|
|
break;
|
|
|
|
}
|
2001-02-12 21:47:12 +03:00
|
|
|
sc->sc_gain[i][CMPCI_LEFT] = sc->sc_gain[i][CMPCI_RIGHT] = v;
|
2000-05-01 01:59:58 +04:00
|
|
|
cmpci_set_mixer_gain(sc, i);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_intr(void *handle)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
struct cmpci_softc *sc;
|
2000-05-01 01:59:58 +04:00
|
|
|
uint32_t intrstat;
|
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
sc = handle;
|
2000-05-01 01:59:58 +04:00
|
|
|
intrstat = bus_space_read_4(sc->sc_iot, sc->sc_ioh,
|
|
|
|
CMPCI_REG_INTR_STATUS);
|
|
|
|
|
|
|
|
if (!(intrstat & CMPCI_REG_ANY_INTR))
|
|
|
|
return 0;
|
|
|
|
|
2001-09-04 17:36:07 +04:00
|
|
|
delay(10);
|
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
/* disable and reset intr */
|
|
|
|
if (intrstat & CMPCI_REG_CH0_INTR)
|
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_INTR_CTRL,
|
|
|
|
CMPCI_REG_CH0_INTR_ENABLE);
|
|
|
|
if (intrstat & CMPCI_REG_CH1_INTR)
|
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_INTR_CTRL,
|
|
|
|
CMPCI_REG_CH1_INTR_ENABLE);
|
|
|
|
|
|
|
|
if (intrstat & CMPCI_REG_CH0_INTR) {
|
|
|
|
if (sc->sc_play.intr != NULL)
|
|
|
|
(*sc->sc_play.intr)(sc->sc_play.intr_arg);
|
|
|
|
}
|
|
|
|
if (intrstat & CMPCI_REG_CH1_INTR) {
|
|
|
|
if (sc->sc_rec.intr != NULL)
|
|
|
|
(*sc->sc_rec.intr)(sc->sc_rec.intr_arg);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* enable intr */
|
|
|
|
if (intrstat & CMPCI_REG_CH0_INTR)
|
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_INTR_CTRL,
|
|
|
|
CMPCI_REG_CH0_INTR_ENABLE);
|
|
|
|
if (intrstat & CMPCI_REG_CH1_INTR)
|
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_INTR_CTRL,
|
|
|
|
CMPCI_REG_CH1_INTR_ENABLE);
|
2001-09-04 17:36:07 +04:00
|
|
|
|
|
|
|
#if NMPU > 0
|
|
|
|
if (intrstat & CMPCI_REG_UART_INTR && sc->sc_mpudev != NULL)
|
|
|
|
mpu_intr(sc->sc_mpudev);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
return 1;
|
2000-05-01 01:59:58 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_query_encoding(void *handle, struct audio_encoding *fp)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
switch (fp->index) {
|
|
|
|
case 0:
|
|
|
|
strcpy(fp->name, AudioEulinear);
|
|
|
|
fp->encoding = AUDIO_ENCODING_ULINEAR;
|
|
|
|
fp->precision = 8;
|
|
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
strcpy(fp->name, AudioEmulaw);
|
|
|
|
fp->encoding = AUDIO_ENCODING_ULAW;
|
|
|
|
fp->precision = 8;
|
|
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
strcpy(fp->name, AudioEalaw);
|
|
|
|
fp->encoding = AUDIO_ENCODING_ALAW;
|
|
|
|
fp->precision = 8;
|
|
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
|
|
break;
|
|
|
|
case 3:
|
|
|
|
strcpy(fp->name, AudioEslinear);
|
|
|
|
fp->encoding = AUDIO_ENCODING_SLINEAR;
|
|
|
|
fp->precision = 8;
|
|
|
|
fp->flags = 0;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
strcpy(fp->name, AudioEslinear_le);
|
|
|
|
fp->encoding = AUDIO_ENCODING_SLINEAR_LE;
|
|
|
|
fp->precision = 16;
|
|
|
|
fp->flags = 0;
|
|
|
|
break;
|
|
|
|
case 5:
|
|
|
|
strcpy(fp->name, AudioEulinear_le);
|
|
|
|
fp->encoding = AUDIO_ENCODING_ULINEAR_LE;
|
|
|
|
fp->precision = 16;
|
|
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
|
|
break;
|
|
|
|
case 6:
|
|
|
|
strcpy(fp->name, AudioEslinear_be);
|
|
|
|
fp->encoding = AUDIO_ENCODING_SLINEAR_BE;
|
|
|
|
fp->precision = 16;
|
|
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
|
|
break;
|
|
|
|
case 7:
|
|
|
|
strcpy(fp->name, AudioEulinear_be);
|
|
|
|
fp->encoding = AUDIO_ENCODING_ULINEAR_BE;
|
|
|
|
fp->precision = 16;
|
|
|
|
fp->flags = AUDIO_ENCODINGFLAG_EMULATED;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_set_params(void *handle, int setmode, int usemode,
|
|
|
|
audio_params_t *play, audio_params_t *rec,
|
|
|
|
stream_filter_list_t *pfil, stream_filter_list_t *rfil)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
|
|
|
int i;
|
2005-01-15 18:19:51 +03:00
|
|
|
struct cmpci_softc *sc;
|
2000-05-01 01:59:58 +04:00
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
sc = handle;
|
2000-05-01 01:59:58 +04:00
|
|
|
for (i = 0; i < 2; i++) {
|
|
|
|
int md_format;
|
|
|
|
int md_divide;
|
|
|
|
int md_index;
|
|
|
|
int mode;
|
merge kent-audio1 branch, which introduces audio filter pipeline to the MI
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
|
|
|
audio_params_t *p;
|
|
|
|
stream_filter_list_t *fil;
|
|
|
|
int ind;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
switch (i) {
|
|
|
|
case 0:
|
|
|
|
mode = AUMODE_PLAY;
|
|
|
|
p = play;
|
merge kent-audio1 branch, which introduces audio filter pipeline to the MI
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
|
|
|
fil = pfil;
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
mode = AUMODE_RECORD;
|
|
|
|
p = rec;
|
merge kent-audio1 branch, which introduces audio filter pipeline to the MI
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
|
|
|
fil = rfil;
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
2003-10-25 22:29:12 +04:00
|
|
|
default:
|
|
|
|
return EINVAL;
|
2000-05-01 01:59:58 +04:00
|
|
|
}
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
if (!(setmode & mode))
|
|
|
|
continue;
|
|
|
|
|
merge kent-audio1 branch, which introduces audio filter pipeline to the MI
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
|
|
|
md_index = cmpci_rate_to_index(p->sample_rate);
|
|
|
|
md_divide = cmpci_index_to_divider(md_index);
|
|
|
|
p->sample_rate = cmpci_index_to_rate(md_index);
|
|
|
|
DPRINTF(("%s: sample:%u, divider=%d\n",
|
|
|
|
sc->sc_dev.dv_xname, p->sample_rate, md_divide));
|
|
|
|
|
|
|
|
ind = auconv_set_converter(cmpci_formats, CMPCI_NFORMATS,
|
|
|
|
mode, p, FALSE, fil);
|
|
|
|
if (ind < 0)
|
|
|
|
return EINVAL;
|
|
|
|
if (fil->req_size > 0)
|
|
|
|
p = &fil->filters[0].param;
|
2000-05-01 01:59:58 +04:00
|
|
|
|
|
|
|
/* format */
|
merge kent-audio1 branch, which introduces audio filter pipeline to the MI
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
|
|
|
md_format = p->channels == 1
|
|
|
|
? CMPCI_REG_FORMAT_MONO : CMPCI_REG_FORMAT_STEREO;
|
|
|
|
md_format |= p->precision == 16
|
|
|
|
? CMPCI_REG_FORMAT_16BIT : CMPCI_REG_FORMAT_8BIT;
|
|
|
|
if (mode & AUMODE_PLAY) {
|
2000-05-01 01:59:58 +04:00
|
|
|
cmpci_reg_partial_write_4(sc,
|
2001-02-12 21:47:12 +03:00
|
|
|
CMPCI_REG_CHANNEL_FORMAT,
|
|
|
|
CMPCI_REG_CH0_FORMAT_SHIFT,
|
|
|
|
CMPCI_REG_CH0_FORMAT_MASK, md_format);
|
2000-05-01 01:59:58 +04:00
|
|
|
cmpci_reg_partial_write_4(sc,
|
|
|
|
CMPCI_REG_FUNC_1, CMPCI_REG_DAC_FS_SHIFT,
|
|
|
|
CMPCI_REG_DAC_FS_MASK, md_divide);
|
2001-02-12 21:47:12 +03:00
|
|
|
sc->sc_play.md_divide = md_divide;
|
2000-05-01 01:59:58 +04:00
|
|
|
} else {
|
merge kent-audio1 branch, which introduces audio filter pipeline to the MI
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
|
|
|
cmpci_reg_partial_write_4(sc,
|
|
|
|
CMPCI_REG_CHANNEL_FORMAT,
|
|
|
|
CMPCI_REG_CH1_FORMAT_SHIFT,
|
|
|
|
CMPCI_REG_CH1_FORMAT_MASK, md_format);
|
2000-05-01 01:59:58 +04:00
|
|
|
cmpci_reg_partial_write_4(sc,
|
|
|
|
CMPCI_REG_FUNC_1, CMPCI_REG_ADC_FS_SHIFT,
|
|
|
|
CMPCI_REG_ADC_FS_MASK, md_divide);
|
2001-02-12 21:47:12 +03:00
|
|
|
sc->sc_rec.md_divide = md_divide;
|
2000-05-01 01:59:58 +04:00
|
|
|
}
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
cmpci_set_out_ports(sc);
|
|
|
|
cmpci_set_in_ports(sc);
|
2000-05-01 01:59:58 +04:00
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ARGSUSED */
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_round_blocksize(void *handle, int block,
|
|
|
|
int mode, const audio_params_t *param)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
|
|
|
return block & -4;
|
2000-05-01 01:59:58 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_halt_output(void *handle)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
struct cmpci_softc *sc;
|
2000-05-01 01:59:58 +04:00
|
|
|
int s;
|
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
sc = handle;
|
2000-05-01 01:59:58 +04:00
|
|
|
s = splaudio();
|
|
|
|
sc->sc_play.intr = NULL;
|
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_INTR_CTRL, CMPCI_REG_CH0_INTR_ENABLE);
|
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_FUNC_0, CMPCI_REG_CH0_ENABLE);
|
|
|
|
/* wait for reset DMA */
|
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_FUNC_0, CMPCI_REG_CH0_RESET);
|
|
|
|
delay(10);
|
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_FUNC_0, CMPCI_REG_CH0_RESET);
|
|
|
|
splx(s);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_halt_input(void *handle)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
struct cmpci_softc *sc;
|
2000-05-01 01:59:58 +04:00
|
|
|
int s;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
sc = handle;
|
2000-05-01 01:59:58 +04:00
|
|
|
s = splaudio();
|
|
|
|
sc->sc_rec.intr = NULL;
|
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_INTR_CTRL, CMPCI_REG_CH1_INTR_ENABLE);
|
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_FUNC_0, CMPCI_REG_CH1_ENABLE);
|
|
|
|
/* wait for reset DMA */
|
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_FUNC_0, CMPCI_REG_CH1_RESET);
|
|
|
|
delay(10);
|
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_FUNC_0, CMPCI_REG_CH1_RESET);
|
|
|
|
splx(s);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* get audio device information */
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_getdev(void *handle, struct audio_device *ad)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
struct cmpci_softc *sc;
|
2000-05-01 01:59:58 +04:00
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
sc = handle;
|
2000-05-01 01:59:58 +04:00
|
|
|
strncpy(ad->name, "CMI PCI Audio", sizeof(ad->name));
|
2001-02-12 21:47:12 +03:00
|
|
|
snprintf(ad->version, sizeof(ad->version), "0x%02x",
|
|
|
|
PCI_REVISION(sc->sc_class));
|
|
|
|
switch (PCI_PRODUCT(sc->sc_id)) {
|
2000-05-01 01:59:58 +04:00
|
|
|
case PCI_PRODUCT_CMEDIA_CMI8338A:
|
|
|
|
strncpy(ad->config, "CMI8338A", sizeof(ad->config));
|
|
|
|
break;
|
|
|
|
case PCI_PRODUCT_CMEDIA_CMI8338B:
|
|
|
|
strncpy(ad->config, "CMI8338B", sizeof(ad->config));
|
|
|
|
break;
|
|
|
|
case PCI_PRODUCT_CMEDIA_CMI8738:
|
|
|
|
strncpy(ad->config, "CMI8738", sizeof(ad->config));
|
|
|
|
break;
|
2001-02-12 21:47:12 +03:00
|
|
|
case PCI_PRODUCT_CMEDIA_CMI8738B:
|
|
|
|
strncpy(ad->config, "CMI8738B", sizeof(ad->config));
|
|
|
|
break;
|
2000-05-01 01:59:58 +04:00
|
|
|
default:
|
|
|
|
strncpy(ad->config, "unknown", sizeof(ad->config));
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* mixer device information */
|
|
|
|
int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_query_devinfo(void *handle, mixer_devinfo_t *dip)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
static const char *const mixer_port_names[] = {
|
|
|
|
AudioNdac, AudioNfmsynth, AudioNcd, AudioNline, AudioNaux,
|
|
|
|
AudioNmicrophone
|
|
|
|
};
|
|
|
|
static const char *const mixer_classes[] = {
|
|
|
|
AudioCinputs, AudioCoutputs, AudioCrecord, CmpciCplayback,
|
|
|
|
CmpciCspdif
|
|
|
|
};
|
2005-01-15 18:19:51 +03:00
|
|
|
struct cmpci_softc *sc;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
int i;
|
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
sc = handle;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
dip->prev = dip->next = AUDIO_MIXER_LAST;
|
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
switch (dip->index) {
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_INPUT_CLASS:
|
|
|
|
case CMPCI_OUTPUT_CLASS:
|
|
|
|
case CMPCI_RECORD_CLASS:
|
|
|
|
case CMPCI_PLAYBACK_CLASS:
|
|
|
|
case CMPCI_SPDIF_CLASS:
|
|
|
|
dip->type = AUDIO_MIXER_CLASS;
|
|
|
|
dip->mixer_class = dip->index;
|
|
|
|
strcpy(dip->label.name,
|
|
|
|
mixer_classes[dip->index - CMPCI_INPUT_CLASS]);
|
2000-05-01 01:59:58 +04:00
|
|
|
return 0;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
|
|
|
case CMPCI_AUX_IN_VOL:
|
|
|
|
dip->un.v.delta = 1 << (8 - CMPCI_REG_AUX_VALBITS);
|
|
|
|
goto vol1;
|
|
|
|
case CMPCI_DAC_VOL:
|
2000-05-01 01:59:58 +04:00
|
|
|
case CMPCI_FM_VOL:
|
|
|
|
case CMPCI_CD_VOL:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_LINE_IN_VOL:
|
|
|
|
case CMPCI_MIC_VOL:
|
|
|
|
dip->un.v.delta = 1 << (8 - CMPCI_SB16_MIXER_VALBITS);
|
|
|
|
vol1: dip->mixer_class = CMPCI_INPUT_CLASS;
|
|
|
|
dip->next = dip->index + 6; /* CMPCI_xxx_MUTE */
|
|
|
|
strcpy(dip->label.name, mixer_port_names[dip->index]);
|
|
|
|
dip->un.v.num_channels = (dip->index == CMPCI_MIC_VOL ? 1 : 2);
|
|
|
|
vol:
|
2000-05-01 01:59:58 +04:00
|
|
|
dip->type = AUDIO_MIXER_VALUE;
|
|
|
|
strcpy(dip->un.v.units.name, AudioNvolume);
|
|
|
|
return 0;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
|
|
|
case CMPCI_MIC_MUTE:
|
|
|
|
dip->next = CMPCI_MIC_PREAMP;
|
|
|
|
/* FALLTHROUGH */
|
|
|
|
case CMPCI_DAC_MUTE:
|
|
|
|
case CMPCI_FM_MUTE:
|
|
|
|
case CMPCI_CD_MUTE:
|
|
|
|
case CMPCI_LINE_IN_MUTE:
|
|
|
|
case CMPCI_AUX_IN_MUTE:
|
|
|
|
dip->prev = dip->index - 6; /* CMPCI_xxx_VOL */
|
2000-05-01 01:59:58 +04:00
|
|
|
dip->mixer_class = CMPCI_INPUT_CLASS;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
strcpy(dip->label.name, AudioNmute);
|
|
|
|
goto on_off;
|
|
|
|
on_off:
|
|
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
|
|
dip->un.e.num_mem = 2;
|
|
|
|
strcpy(dip->un.e.member[0].label.name, AudioNoff);
|
|
|
|
dip->un.e.member[0].ord = 0;
|
|
|
|
strcpy(dip->un.e.member[1].label.name, AudioNon);
|
|
|
|
dip->un.e.member[1].ord = 1;
|
2000-05-01 01:59:58 +04:00
|
|
|
return 0;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
|
|
|
case CMPCI_MIC_PREAMP:
|
2000-05-01 01:59:58 +04:00
|
|
|
dip->mixer_class = CMPCI_INPUT_CLASS;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
dip->prev = CMPCI_MIC_MUTE;
|
|
|
|
strcpy(dip->label.name, AudioNpreamp);
|
|
|
|
goto on_off;
|
|
|
|
case CMPCI_PCSPEAKER:
|
2000-05-01 01:59:58 +04:00
|
|
|
dip->mixer_class = CMPCI_INPUT_CLASS;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
strcpy(dip->label.name, AudioNspeaker);
|
|
|
|
dip->un.v.num_channels = 1;
|
|
|
|
dip->un.v.delta = 1 << (8 - CMPCI_SB16_MIXER_SPEAKER_VALBITS);
|
|
|
|
goto vol;
|
2000-05-01 01:59:58 +04:00
|
|
|
case CMPCI_RECORD_SOURCE:
|
|
|
|
dip->mixer_class = CMPCI_RECORD_CLASS;
|
|
|
|
strcpy(dip->label.name, AudioNsource);
|
|
|
|
dip->type = AUDIO_MIXER_SET;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
dip->un.s.num_mem = 7;
|
2000-05-01 01:59:58 +04:00
|
|
|
strcpy(dip->un.s.member[0].label.name, AudioNmicrophone);
|
2001-09-04 17:36:07 +04:00
|
|
|
dip->un.s.member[0].mask = CMPCI_RECORD_SOURCE_MIC;
|
2000-05-01 01:59:58 +04:00
|
|
|
strcpy(dip->un.s.member[1].label.name, AudioNcd);
|
2001-09-04 17:36:07 +04:00
|
|
|
dip->un.s.member[1].mask = CMPCI_RECORD_SOURCE_CD;
|
2000-05-01 01:59:58 +04:00
|
|
|
strcpy(dip->un.s.member[2].label.name, AudioNline);
|
2001-09-04 17:36:07 +04:00
|
|
|
dip->un.s.member[2].mask = CMPCI_RECORD_SOURCE_LINE_IN;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
strcpy(dip->un.s.member[3].label.name, AudioNaux);
|
|
|
|
dip->un.s.member[3].mask = CMPCI_RECORD_SOURCE_AUX_IN;
|
|
|
|
strcpy(dip->un.s.member[4].label.name, AudioNwave);
|
|
|
|
dip->un.s.member[4].mask = CMPCI_RECORD_SOURCE_WAVE;
|
|
|
|
strcpy(dip->un.s.member[5].label.name, AudioNfmsynth);
|
|
|
|
dip->un.s.member[5].mask = CMPCI_RECORD_SOURCE_FM;
|
|
|
|
strcpy(dip->un.s.member[6].label.name, CmpciNspdif);
|
|
|
|
dip->un.s.member[6].mask = CMPCI_RECORD_SOURCE_SPDIF;
|
2000-05-01 01:59:58 +04:00
|
|
|
return 0;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_MIC_RECVOL:
|
2000-05-01 01:59:58 +04:00
|
|
|
dip->mixer_class = CMPCI_RECORD_CLASS;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
strcpy(dip->label.name, AudioNmicrophone);
|
2000-05-01 01:59:58 +04:00
|
|
|
dip->un.v.num_channels = 1;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
dip->un.v.delta = 1 << (8 - CMPCI_REG_ADMIC_VALBITS);
|
|
|
|
goto vol;
|
|
|
|
|
|
|
|
case CMPCI_PLAYBACK_MODE:
|
|
|
|
dip->mixer_class = CMPCI_PLAYBACK_CLASS;
|
2000-05-01 01:59:58 +04:00
|
|
|
dip->type = AUDIO_MIXER_ENUM;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
strcpy(dip->label.name, AudioNmode);
|
|
|
|
dip->un.e.num_mem = 2;
|
|
|
|
strcpy(dip->un.e.member[0].label.name, AudioNdac);
|
|
|
|
dip->un.e.member[0].ord = CMPCI_PLAYBACK_MODE_WAVE;
|
|
|
|
strcpy(dip->un.e.member[1].label.name, CmpciNspdif);
|
|
|
|
dip->un.e.member[1].ord = CMPCI_PLAYBACK_MODE_SPDIF;
|
2000-05-01 01:59:58 +04:00
|
|
|
return 0;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_SPDIF_IN_SELECT:
|
|
|
|
dip->mixer_class = CMPCI_SPDIF_CLASS;
|
|
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
|
|
dip->next = CMPCI_SPDIF_IN_PHASE;
|
|
|
|
strcpy(dip->label.name, AudioNinput);
|
|
|
|
i = 0;
|
|
|
|
strcpy(dip->un.e.member[i].label.name, CmpciNspdin1);
|
|
|
|
dip->un.e.member[i++].ord = CMPCI_SPDIF_IN_SPDIN1;
|
|
|
|
if (CMPCI_ISCAP(sc, 2ND_SPDIN)) {
|
|
|
|
strcpy(dip->un.e.member[i].label.name, CmpciNspdin2);
|
|
|
|
dip->un.e.member[i++].ord = CMPCI_SPDIF_IN_SPDIN2;
|
|
|
|
}
|
|
|
|
strcpy(dip->un.e.member[i].label.name, CmpciNspdout);
|
|
|
|
dip->un.e.member[i++].ord = CMPCI_SPDIF_IN_SPDOUT;
|
|
|
|
dip->un.e.num_mem = i;
|
2001-02-12 21:47:12 +03:00
|
|
|
return 0;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_SPDIF_IN_PHASE:
|
2001-02-12 21:47:12 +03:00
|
|
|
dip->mixer_class = CMPCI_SPDIF_CLASS;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
dip->prev = CMPCI_SPDIF_IN_SELECT;
|
|
|
|
strcpy(dip->label.name, CmpciNphase);
|
|
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
|
|
dip->un.e.num_mem = 2;
|
|
|
|
strcpy(dip->un.e.member[0].label.name, CmpciNpositive);
|
|
|
|
dip->un.e.member[0].ord = CMPCI_SPDIF_IN_PHASE_POSITIVE;
|
|
|
|
strcpy(dip->un.e.member[1].label.name, CmpciNnegative);
|
|
|
|
dip->un.e.member[1].ord = CMPCI_SPDIF_IN_PHASE_NEGATIVE;
|
2001-02-12 21:47:12 +03:00
|
|
|
return 0;
|
|
|
|
case CMPCI_SPDIF_LOOP:
|
|
|
|
dip->mixer_class = CMPCI_SPDIF_CLASS;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
dip->next = CMPCI_SPDIF_OUT_PLAYBACK;
|
|
|
|
strcpy(dip->label.name, AudioNoutput);
|
|
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
|
|
dip->un.e.num_mem = 2;
|
|
|
|
strcpy(dip->un.e.member[0].label.name, CmpciNplayback);
|
|
|
|
dip->un.e.member[0].ord = CMPCI_SPDIF_LOOP_OFF;
|
|
|
|
strcpy(dip->un.e.member[1].label.name, CmpciNspdin);
|
|
|
|
dip->un.e.member[1].ord = CMPCI_SPDIF_LOOP_ON;
|
|
|
|
return 0;
|
|
|
|
case CMPCI_SPDIF_OUT_PLAYBACK:
|
2001-02-12 21:47:12 +03:00
|
|
|
dip->mixer_class = CMPCI_SPDIF_CLASS;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
dip->prev = CMPCI_SPDIF_LOOP;
|
|
|
|
dip->next = CMPCI_SPDIF_OUT_VOLTAGE;
|
|
|
|
strcpy(dip->label.name, CmpciNplayback);
|
|
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
|
|
dip->un.e.num_mem = 2;
|
|
|
|
strcpy(dip->un.e.member[0].label.name, AudioNwave);
|
|
|
|
dip->un.e.member[0].ord = CMPCI_SPDIF_OUT_PLAYBACK_WAVE;
|
|
|
|
strcpy(dip->un.e.member[1].label.name, CmpciNlegacy);
|
|
|
|
dip->un.e.member[1].ord = CMPCI_SPDIF_OUT_PLAYBACK_LEGACY;
|
|
|
|
return 0;
|
2001-02-12 21:47:12 +03:00
|
|
|
case CMPCI_SPDIF_OUT_VOLTAGE:
|
|
|
|
dip->mixer_class = CMPCI_SPDIF_CLASS;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
dip->prev = CMPCI_SPDIF_OUT_PLAYBACK;
|
|
|
|
strcpy(dip->label.name, CmpciNvoltage);
|
2001-02-12 21:47:12 +03:00
|
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
|
|
dip->un.e.num_mem = 2;
|
2003-11-22 19:48:14 +03:00
|
|
|
strcpy(dip->un.e.member[0].label.name, CmpciNhigh_v);
|
|
|
|
dip->un.e.member[0].ord = CMPCI_SPDIF_OUT_VOLTAGE_HIGH;
|
|
|
|
strcpy(dip->un.e.member[1].label.name, CmpciNlow_v);
|
|
|
|
dip->un.e.member[1].ord = CMPCI_SPDIF_OUT_VOLTAGE_LOW;
|
2001-02-12 21:47:12 +03:00
|
|
|
return 0;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_MONITOR_DAC:
|
2001-02-12 21:47:12 +03:00
|
|
|
dip->mixer_class = CMPCI_SPDIF_CLASS;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
strcpy(dip->label.name, AudioNmonitor);
|
|
|
|
dip->type = AUDIO_MIXER_ENUM;
|
|
|
|
dip->un.e.num_mem = 3;
|
|
|
|
strcpy(dip->un.e.member[0].label.name, AudioNoff);
|
|
|
|
dip->un.e.member[0].ord = CMPCI_MONITOR_DAC_OFF;
|
|
|
|
strcpy(dip->un.e.member[1].label.name, CmpciNspdin);
|
|
|
|
dip->un.e.member[1].ord = CMPCI_MONITOR_DAC_SPDIN;
|
|
|
|
strcpy(dip->un.e.member[2].label.name, CmpciNspdout);
|
|
|
|
dip->un.e.member[2].ord = CMPCI_MONITOR_DAC_SPDOUT;
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
case CMPCI_MASTER_VOL:
|
|
|
|
dip->mixer_class = CMPCI_OUTPUT_CLASS;
|
|
|
|
strcpy(dip->label.name, AudioNmaster);
|
|
|
|
dip->un.v.num_channels = 2;
|
|
|
|
dip->un.v.delta = 1 << (8 - CMPCI_SB16_MIXER_VALBITS);
|
|
|
|
goto vol;
|
2001-02-12 21:47:12 +03:00
|
|
|
case CMPCI_REAR:
|
|
|
|
dip->mixer_class = CMPCI_OUTPUT_CLASS;
|
|
|
|
dip->next = CMPCI_INDIVIDUAL;
|
|
|
|
strcpy(dip->label.name, CmpciNrear);
|
|
|
|
goto on_off;
|
|
|
|
case CMPCI_INDIVIDUAL:
|
|
|
|
dip->mixer_class = CMPCI_OUTPUT_CLASS;
|
|
|
|
dip->prev = CMPCI_REAR;
|
|
|
|
dip->next = CMPCI_REVERSE;
|
|
|
|
strcpy(dip->label.name, CmpciNindividual);
|
|
|
|
goto on_off;
|
|
|
|
case CMPCI_REVERSE:
|
|
|
|
dip->mixer_class = CMPCI_OUTPUT_CLASS;
|
|
|
|
dip->prev = CMPCI_INDIVIDUAL;
|
|
|
|
strcpy(dip->label.name, CmpciNreverse);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
goto on_off;
|
2001-02-12 21:47:12 +03:00
|
|
|
case CMPCI_SURROUND:
|
|
|
|
dip->mixer_class = CMPCI_OUTPUT_CLASS;
|
|
|
|
strcpy(dip->label.name, CmpciNsurround);
|
|
|
|
goto on_off;
|
2000-05-01 01:59:58 +04:00
|
|
|
}
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
return ENXIO;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_alloc_dmamem(struct cmpci_softc *sc, size_t size, struct malloc_type *type,
|
|
|
|
int flags, caddr_t *r_addr)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
int error;
|
2000-05-01 01:59:58 +04:00
|
|
|
struct cmpci_dmanode *n;
|
|
|
|
int w;
|
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
error = 0;
|
2000-05-01 01:59:58 +04:00
|
|
|
n = malloc(sizeof(struct cmpci_dmanode), type, flags);
|
|
|
|
if (n == NULL) {
|
|
|
|
error = ENOMEM;
|
|
|
|
goto quit;
|
|
|
|
}
|
|
|
|
|
|
|
|
w = (flags & M_NOWAIT) ? BUS_DMA_NOWAIT : BUS_DMA_WAITOK;
|
|
|
|
#define CMPCI_DMABUF_ALIGN 0x4
|
|
|
|
#define CMPCI_DMABUF_BOUNDARY 0x0
|
|
|
|
n->cd_tag = sc->sc_dmat;
|
|
|
|
n->cd_size = size;
|
|
|
|
error = bus_dmamem_alloc(n->cd_tag, n->cd_size,
|
|
|
|
CMPCI_DMABUF_ALIGN, CMPCI_DMABUF_BOUNDARY, n->cd_segs,
|
2001-02-12 21:47:12 +03:00
|
|
|
sizeof(n->cd_segs)/sizeof(n->cd_segs[0]), &n->cd_nsegs, w);
|
2000-05-01 01:59:58 +04:00
|
|
|
if (error)
|
|
|
|
goto mfree;
|
|
|
|
error = bus_dmamem_map(n->cd_tag, n->cd_segs, n->cd_nsegs, n->cd_size,
|
|
|
|
&n->cd_addr, w | BUS_DMA_COHERENT);
|
|
|
|
if (error)
|
|
|
|
goto dmafree;
|
|
|
|
error = bus_dmamap_create(n->cd_tag, n->cd_size, 1, n->cd_size, 0,
|
|
|
|
w, &n->cd_map);
|
|
|
|
if (error)
|
|
|
|
goto unmap;
|
|
|
|
error = bus_dmamap_load(n->cd_tag, n->cd_map, n->cd_addr, n->cd_size,
|
|
|
|
NULL, w);
|
|
|
|
if (error)
|
|
|
|
goto destroy;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
n->cd_next = sc->sc_dmap;
|
|
|
|
sc->sc_dmap = n;
|
|
|
|
*r_addr = KVADDR(n);
|
|
|
|
return 0;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
destroy:
|
|
|
|
bus_dmamap_destroy(n->cd_tag, n->cd_map);
|
|
|
|
unmap:
|
|
|
|
bus_dmamem_unmap(n->cd_tag, n->cd_addr, n->cd_size);
|
|
|
|
dmafree:
|
|
|
|
bus_dmamem_free(n->cd_tag,
|
|
|
|
n->cd_segs, sizeof(n->cd_segs)/sizeof(n->cd_segs[0]));
|
|
|
|
mfree:
|
|
|
|
free(n, type);
|
|
|
|
quit:
|
|
|
|
return error;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_free_dmamem(struct cmpci_softc *sc, caddr_t addr, struct malloc_type *type)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
|
|
|
struct cmpci_dmanode **nnp;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
for (nnp = &sc->sc_dmap; *nnp; nnp= &(*nnp)->cd_next) {
|
|
|
|
if ((*nnp)->cd_addr == addr) {
|
|
|
|
struct cmpci_dmanode *n = *nnp;
|
|
|
|
bus_dmamap_unload(n->cd_tag, n->cd_map);
|
|
|
|
bus_dmamap_destroy(n->cd_tag, n->cd_map);
|
|
|
|
bus_dmamem_unmap(n->cd_tag, n->cd_addr, n->cd_size);
|
|
|
|
bus_dmamem_free(n->cd_tag, n->cd_segs,
|
|
|
|
sizeof(n->cd_segs)/sizeof(n->cd_segs[0]));
|
|
|
|
free(n, type);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return -1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct cmpci_dmanode *
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_find_dmamem(struct cmpci_softc *sc, caddr_t addr)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
|
|
|
struct cmpci_dmanode *p;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
for (p = sc->sc_dmap; p; p = p->cd_next)
|
|
|
|
if (KVADDR(p) == (void *)addr)
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
|
|
|
return p;
|
|
|
|
}
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
static void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_print_dmamem(struct cmpci_dmanode *);
|
2000-05-01 01:59:58 +04:00
|
|
|
static void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_print_dmamem(struct cmpci_dmanode *p)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
DPRINTF(("DMA at virt:%p, dmaseg:%p, mapseg:%p, size:%p\n",
|
|
|
|
(void *)p->cd_addr, (void *)p->cd_segs[0].ds_addr,
|
|
|
|
(void *)DMAADDR(p), (void *)p->cd_size));
|
|
|
|
}
|
|
|
|
#endif /* DEBUG */
|
|
|
|
|
|
|
|
static void *
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_allocm(void *handle, int direction, size_t size,
|
|
|
|
struct malloc_type *type, int flags)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
|
|
|
caddr_t addr;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
if (cmpci_alloc_dmamem(handle, size, type, flags, &addr))
|
2000-05-01 01:59:58 +04:00
|
|
|
return NULL;
|
|
|
|
return addr;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_freem(void *handle, void *addr, struct malloc_type *type)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_free_dmamem(handle, addr, type);
|
2000-05-01 01:59:58 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
#define MAXVAL 256
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_adjust(int val, int mask)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
val += (MAXVAL - mask) >> 1;
|
|
|
|
if (val >= MAXVAL)
|
|
|
|
val = MAXVAL-1;
|
|
|
|
return val & mask;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_set_mixer_gain(struct cmpci_softc *sc, int port)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2003-12-06 12:32:22 +03:00
|
|
|
int src;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
int bits, mask;
|
2000-05-01 01:59:58 +04:00
|
|
|
|
|
|
|
switch (port) {
|
|
|
|
case CMPCI_MIC_VOL:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
cmpci_mixerreg_write(sc, CMPCI_SB16_MIXER_MIC,
|
|
|
|
CMPCI_ADJUST_MIC_GAIN(sc, sc->sc_gain[port][CMPCI_LR]));
|
2003-12-06 12:32:22 +03:00
|
|
|
return;
|
2000-05-01 01:59:58 +04:00
|
|
|
case CMPCI_MASTER_VOL:
|
|
|
|
src = CMPCI_SB16_MIXER_MASTER_L;
|
|
|
|
break;
|
|
|
|
case CMPCI_LINE_IN_VOL:
|
|
|
|
src = CMPCI_SB16_MIXER_LINE_L;
|
|
|
|
break;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_AUX_IN_VOL:
|
|
|
|
bus_space_write_1(sc->sc_iot, sc->sc_ioh, CMPCI_REG_MIXER_AUX,
|
|
|
|
CMPCI_ADJUST_AUX_GAIN(sc, sc->sc_gain[port][CMPCI_LEFT],
|
|
|
|
sc->sc_gain[port][CMPCI_RIGHT]));
|
|
|
|
return;
|
|
|
|
case CMPCI_MIC_RECVOL:
|
|
|
|
cmpci_reg_partial_write_1(sc, CMPCI_REG_MIXER25,
|
|
|
|
CMPCI_REG_ADMIC_SHIFT, CMPCI_REG_ADMIC_MASK,
|
|
|
|
CMPCI_ADJUST_ADMIC_GAIN(sc, sc->sc_gain[port][CMPCI_LR]));
|
|
|
|
return;
|
|
|
|
case CMPCI_DAC_VOL:
|
2000-05-01 01:59:58 +04:00
|
|
|
src = CMPCI_SB16_MIXER_VOICE_L;
|
|
|
|
break;
|
|
|
|
case CMPCI_FM_VOL:
|
|
|
|
src = CMPCI_SB16_MIXER_FM_L;
|
|
|
|
break;
|
|
|
|
case CMPCI_CD_VOL:
|
|
|
|
src = CMPCI_SB16_MIXER_CDDA_L;
|
|
|
|
break;
|
|
|
|
case CMPCI_PCSPEAKER:
|
|
|
|
cmpci_mixerreg_write(sc, CMPCI_SB16_MIXER_SPEAKER,
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
CMPCI_ADJUST_2_GAIN(sc, sc->sc_gain[port][CMPCI_LR]));
|
2001-02-12 21:47:12 +03:00
|
|
|
return;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_MIC_PREAMP:
|
|
|
|
if (sc->sc_gain[port][CMPCI_LR])
|
|
|
|
cmpci_reg_clear_1(sc, CMPCI_REG_MIXER25,
|
|
|
|
CMPCI_REG_MICGAINZ);
|
|
|
|
else
|
|
|
|
cmpci_reg_set_1(sc, CMPCI_REG_MIXER25,
|
|
|
|
CMPCI_REG_MICGAINZ);
|
|
|
|
return;
|
|
|
|
|
|
|
|
case CMPCI_DAC_MUTE:
|
|
|
|
if (sc->sc_gain[port][CMPCI_LR])
|
|
|
|
cmpci_reg_set_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_WSMUTE);
|
|
|
|
else
|
|
|
|
cmpci_reg_clear_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_WSMUTE);
|
|
|
|
return;
|
|
|
|
case CMPCI_FM_MUTE:
|
|
|
|
if (sc->sc_gain[port][CMPCI_LR])
|
|
|
|
cmpci_reg_set_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_FMMUTE);
|
|
|
|
else
|
|
|
|
cmpci_reg_clear_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_FMMUTE);
|
|
|
|
return;
|
|
|
|
case CMPCI_AUX_IN_MUTE:
|
|
|
|
if (sc->sc_gain[port][CMPCI_LR])
|
|
|
|
cmpci_reg_clear_1(sc, CMPCI_REG_MIXER25,
|
|
|
|
CMPCI_REG_VAUXRM|CMPCI_REG_VAUXLM);
|
|
|
|
else
|
|
|
|
cmpci_reg_set_1(sc, CMPCI_REG_MIXER25,
|
|
|
|
CMPCI_REG_VAUXRM|CMPCI_REG_VAUXLM);
|
|
|
|
return;
|
|
|
|
case CMPCI_CD_MUTE:
|
|
|
|
mask = CMPCI_SB16_SW_CD;
|
|
|
|
goto sbmute;
|
|
|
|
case CMPCI_MIC_MUTE:
|
|
|
|
mask = CMPCI_SB16_SW_MIC;
|
|
|
|
goto sbmute;
|
|
|
|
case CMPCI_LINE_IN_MUTE:
|
|
|
|
mask = CMPCI_SB16_SW_LINE;
|
|
|
|
sbmute:
|
|
|
|
bits = cmpci_mixerreg_read(sc, CMPCI_SB16_MIXER_OUTMIX);
|
|
|
|
if (sc->sc_gain[port][CMPCI_LR])
|
|
|
|
bits = bits & ~mask;
|
|
|
|
else
|
|
|
|
bits = bits | mask;
|
|
|
|
cmpci_mixerreg_write(sc, CMPCI_SB16_MIXER_OUTMIX, bits);
|
2001-09-04 17:36:07 +04:00
|
|
|
return;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
|
|
|
case CMPCI_SPDIF_IN_SELECT:
|
|
|
|
case CMPCI_MONITOR_DAC:
|
|
|
|
case CMPCI_PLAYBACK_MODE:
|
2001-02-12 21:47:12 +03:00
|
|
|
case CMPCI_SPDIF_LOOP:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_SPDIF_OUT_PLAYBACK:
|
2001-02-12 21:47:12 +03:00
|
|
|
cmpci_set_out_ports(sc);
|
|
|
|
return;
|
|
|
|
case CMPCI_SPDIF_OUT_VOLTAGE:
|
|
|
|
if (CMPCI_ISCAP(sc, SPDOUT_VOLTAGE)) {
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
if (sc->sc_gain[CMPCI_SPDIF_OUT_VOLTAGE][CMPCI_LR]
|
2003-11-22 19:48:14 +03:00
|
|
|
== CMPCI_SPDIF_OUT_VOLTAGE_HIGH)
|
|
|
|
cmpci_reg_clear_reg_misc(sc, CMPCI_REG_5V);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
else
|
2003-11-22 19:48:14 +03:00
|
|
|
cmpci_reg_set_reg_misc(sc, CMPCI_REG_5V);
|
2001-02-12 21:47:12 +03:00
|
|
|
}
|
|
|
|
return;
|
|
|
|
case CMPCI_SURROUND:
|
|
|
|
if (CMPCI_ISCAP(sc, SURROUND)) {
|
|
|
|
if (sc->sc_gain[CMPCI_SURROUND][CMPCI_LR])
|
|
|
|
cmpci_reg_set_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_SURROUND);
|
|
|
|
else
|
|
|
|
cmpci_reg_clear_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_SURROUND);
|
|
|
|
}
|
|
|
|
return;
|
|
|
|
case CMPCI_REAR:
|
|
|
|
if (CMPCI_ISCAP(sc, REAR)) {
|
|
|
|
if (sc->sc_gain[CMPCI_REAR][CMPCI_LR])
|
2003-11-22 19:48:14 +03:00
|
|
|
cmpci_reg_set_reg_misc(sc, CMPCI_REG_N4SPK3D);
|
2001-02-12 21:47:12 +03:00
|
|
|
else
|
2003-11-22 19:48:14 +03:00
|
|
|
cmpci_reg_clear_reg_misc(sc, CMPCI_REG_N4SPK3D);
|
2001-02-12 21:47:12 +03:00
|
|
|
}
|
|
|
|
return;
|
|
|
|
case CMPCI_INDIVIDUAL:
|
|
|
|
if (CMPCI_ISCAP(sc, INDIVIDUAL_REAR)) {
|
|
|
|
if (sc->sc_gain[CMPCI_REAR][CMPCI_LR])
|
|
|
|
cmpci_reg_set_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_INDIVIDUAL);
|
|
|
|
else
|
|
|
|
cmpci_reg_clear_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_INDIVIDUAL);
|
|
|
|
}
|
|
|
|
return;
|
|
|
|
case CMPCI_REVERSE:
|
|
|
|
if (CMPCI_ISCAP(sc, REVERSE_FR)) {
|
|
|
|
if (sc->sc_gain[CMPCI_REVERSE][CMPCI_LR])
|
|
|
|
cmpci_reg_set_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_REVERSE_FR);
|
|
|
|
else
|
|
|
|
cmpci_reg_clear_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_REVERSE_FR);
|
|
|
|
}
|
|
|
|
return;
|
|
|
|
case CMPCI_SPDIF_IN_PHASE:
|
|
|
|
if (CMPCI_ISCAP(sc, SPDIN_PHASE)) {
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
if (sc->sc_gain[CMPCI_SPDIF_IN_PHASE][CMPCI_LR]
|
|
|
|
== CMPCI_SPDIF_IN_PHASE_POSITIVE)
|
2001-09-04 17:36:07 +04:00
|
|
|
cmpci_reg_clear_1(sc, CMPCI_REG_CHANNEL_FORMAT,
|
|
|
|
CMPCI_REG_SPDIN_PHASE);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
else
|
|
|
|
cmpci_reg_set_1(sc, CMPCI_REG_CHANNEL_FORMAT,
|
|
|
|
CMPCI_REG_SPDIN_PHASE);
|
2001-02-12 21:47:12 +03:00
|
|
|
}
|
2000-05-01 01:59:58 +04:00
|
|
|
return;
|
|
|
|
default:
|
|
|
|
return;
|
|
|
|
}
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
|
|
|
cmpci_mixerreg_write(sc, src,
|
|
|
|
CMPCI_ADJUST_GAIN(sc, sc->sc_gain[port][CMPCI_LEFT]));
|
2000-05-01 01:59:58 +04:00
|
|
|
cmpci_mixerreg_write(sc, CMPCI_SB16_MIXER_L_TO_R(src),
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
CMPCI_ADJUST_GAIN(sc, sc->sc_gain[port][CMPCI_RIGHT]));
|
2001-02-12 21:47:12 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_set_out_ports(struct cmpci_softc *sc)
|
2001-02-12 21:47:12 +03:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
uint8_t v;
|
|
|
|
int enspdout;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2001-02-12 21:47:12 +03:00
|
|
|
if (!CMPCI_ISCAP(sc, SPDLOOP))
|
|
|
|
return;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
|
|
|
/* SPDIF/out select */
|
|
|
|
if (sc->sc_gain[CMPCI_SPDIF_LOOP][CMPCI_LR] == CMPCI_SPDIF_LOOP_OFF) {
|
|
|
|
/* playback */
|
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_FUNC_1, CMPCI_REG_SPDIF_LOOP);
|
2001-02-12 21:47:12 +03:00
|
|
|
} else {
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
/* monitor SPDIF/in */
|
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_FUNC_1, CMPCI_REG_SPDIF_LOOP);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* SPDIF in select */
|
|
|
|
v = sc->sc_gain[CMPCI_SPDIF_IN_SELECT][CMPCI_LR];
|
|
|
|
if (v & CMPCI_SPDIFIN_SPDIFIN2)
|
2003-11-22 19:48:14 +03:00
|
|
|
cmpci_reg_set_reg_misc(sc, CMPCI_REG_2ND_SPDIFIN);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
else
|
2003-11-22 19:48:14 +03:00
|
|
|
cmpci_reg_clear_reg_misc(sc, CMPCI_REG_2ND_SPDIFIN);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
if (v & CMPCI_SPDIFIN_SPDIFOUT)
|
2003-11-22 19:48:14 +03:00
|
|
|
cmpci_reg_set_reg_misc(sc, CMPCI_REG_SPDFLOOPI);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
else
|
2003-11-22 19:48:14 +03:00
|
|
|
cmpci_reg_clear_reg_misc(sc, CMPCI_REG_SPDFLOOPI);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
enspdout = 0;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
/* playback to ... */
|
|
|
|
if (CMPCI_ISCAP(sc, SPDOUT) &&
|
|
|
|
sc->sc_gain[CMPCI_PLAYBACK_MODE][CMPCI_LR]
|
|
|
|
== CMPCI_PLAYBACK_MODE_SPDIF &&
|
|
|
|
(sc->sc_play.md_divide == CMPCI_REG_RATE_44100 ||
|
|
|
|
(CMPCI_ISCAP(sc, SPDOUT_48K) &&
|
|
|
|
sc->sc_play.md_divide==CMPCI_REG_RATE_48000))) {
|
|
|
|
/* playback to SPDIF */
|
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_FUNC_1, CMPCI_REG_SPDIF0_ENABLE);
|
|
|
|
enspdout = 1;
|
|
|
|
if (sc->sc_play.md_divide==CMPCI_REG_RATE_48000)
|
2003-11-22 19:48:14 +03:00
|
|
|
cmpci_reg_set_reg_misc(sc,
|
|
|
|
CMPCI_REG_SPDIFOUT_48K | CMPCI_REG_SPDIF48K);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
else
|
2003-11-22 19:48:14 +03:00
|
|
|
cmpci_reg_clear_reg_misc(sc,
|
|
|
|
CMPCI_REG_SPDIFOUT_48K | CMPCI_REG_SPDIF48K);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
} else {
|
|
|
|
/* playback to DAC */
|
2001-02-12 21:47:12 +03:00
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_FUNC_1,
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
CMPCI_REG_SPDIF0_ENABLE);
|
|
|
|
if (CMPCI_ISCAP(sc, SPDOUT_48K))
|
2003-11-22 19:48:14 +03:00
|
|
|
cmpci_reg_clear_reg_misc(sc,
|
|
|
|
CMPCI_REG_SPDIFOUT_48K | CMPCI_REG_SPDIF48K);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/* legacy to SPDIF/out or not */
|
|
|
|
if (CMPCI_ISCAP(sc, SPDLEGACY)) {
|
|
|
|
if (sc->sc_gain[CMPCI_SPDIF_OUT_PLAYBACK][CMPCI_LR]
|
|
|
|
== CMPCI_SPDIF_OUT_PLAYBACK_WAVE)
|
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_LEGACY_CTRL,
|
|
|
|
CMPCI_REG_LEGACY_SPDIF_ENABLE);
|
|
|
|
else {
|
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_LEGACY_CTRL,
|
|
|
|
CMPCI_REG_LEGACY_SPDIF_ENABLE);
|
|
|
|
enspdout = 1;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* enable/disable SPDIF/out */
|
|
|
|
if (CMPCI_ISCAP(sc, XSPDOUT) && enspdout)
|
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_LEGACY_CTRL,
|
|
|
|
CMPCI_REG_XSPDIF_ENABLE);
|
|
|
|
else
|
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_LEGACY_CTRL,
|
|
|
|
CMPCI_REG_XSPDIF_ENABLE);
|
|
|
|
|
2004-10-26 10:32:20 +04:00
|
|
|
/* SPDIF monitor (digital to analog output) */
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
if (CMPCI_ISCAP(sc, SPDIN_MONITOR)) {
|
|
|
|
v = sc->sc_gain[CMPCI_MONITOR_DAC][CMPCI_LR];
|
|
|
|
if (!(v & CMPCI_MONDAC_ENABLE))
|
|
|
|
cmpci_reg_clear_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_SPDIN_MONITOR);
|
|
|
|
if (v & CMPCI_MONDAC_SPDOUT)
|
2001-02-12 21:47:12 +03:00
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_FUNC_1,
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
CMPCI_REG_SPDIFOUT_DAC);
|
|
|
|
else
|
2001-02-12 21:47:12 +03:00
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_FUNC_1,
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
CMPCI_REG_SPDIFOUT_DAC);
|
|
|
|
if (v & CMPCI_MONDAC_ENABLE)
|
|
|
|
cmpci_reg_set_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_SPDIN_MONITOR);
|
2001-02-12 21:47:12 +03:00
|
|
|
}
|
2000-05-01 01:59:58 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_set_in_ports(struct cmpci_softc *sc)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
int mask;
|
2000-05-01 01:59:58 +04:00
|
|
|
int bitsl, bitsr;
|
|
|
|
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
mask = sc->sc_in_mask;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Note CMPCI_RECORD_SOURCE_CD, CMPCI_RECORD_SOURCE_LINE_IN and
|
|
|
|
* CMPCI_RECORD_SOURCE_FM are defined to the corresponding bit
|
|
|
|
* of the mixer register.
|
|
|
|
*/
|
|
|
|
bitsr = mask & (CMPCI_RECORD_SOURCE_CD | CMPCI_RECORD_SOURCE_LINE_IN |
|
|
|
|
CMPCI_RECORD_SOURCE_FM);
|
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
bitsl = CMPCI_SB16_MIXER_SRC_R_TO_L(bitsr);
|
2001-09-04 17:36:07 +04:00
|
|
|
if (mask & CMPCI_RECORD_SOURCE_MIC) {
|
2000-05-01 01:59:58 +04:00
|
|
|
bitsl |= CMPCI_SB16_MIXER_MIC_SRC;
|
|
|
|
bitsr |= CMPCI_SB16_MIXER_MIC_SRC;
|
|
|
|
}
|
|
|
|
cmpci_mixerreg_write(sc, CMPCI_SB16_MIXER_ADCMIX_L, bitsl);
|
|
|
|
cmpci_mixerreg_write(sc, CMPCI_SB16_MIXER_ADCMIX_R, bitsr);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
|
|
|
if (mask & CMPCI_RECORD_SOURCE_AUX_IN)
|
|
|
|
cmpci_reg_set_1(sc, CMPCI_REG_MIXER25,
|
|
|
|
CMPCI_REG_RAUXREN | CMPCI_REG_RAUXLEN);
|
|
|
|
else
|
|
|
|
cmpci_reg_clear_1(sc, CMPCI_REG_MIXER25,
|
|
|
|
CMPCI_REG_RAUXREN | CMPCI_REG_RAUXLEN);
|
|
|
|
|
|
|
|
if (mask & CMPCI_RECORD_SOURCE_WAVE)
|
|
|
|
cmpci_reg_set_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_WAVEINL | CMPCI_REG_WAVEINR);
|
|
|
|
else
|
|
|
|
cmpci_reg_clear_1(sc, CMPCI_REG_MIXER24,
|
|
|
|
CMPCI_REG_WAVEINL | CMPCI_REG_WAVEINR);
|
|
|
|
|
2001-02-12 21:47:12 +03:00
|
|
|
if (CMPCI_ISCAP(sc, SPDIN) &&
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
(sc->sc_rec.md_divide == CMPCI_REG_RATE_44100 ||
|
|
|
|
(CMPCI_ISCAP(sc, SPDOUT_48K) &&
|
|
|
|
sc->sc_rec.md_divide == CMPCI_REG_RATE_48000/* XXX? */))) {
|
2001-09-04 17:36:07 +04:00
|
|
|
if (mask & CMPCI_RECORD_SOURCE_SPDIF) {
|
2001-02-12 21:47:12 +03:00
|
|
|
/* enable SPDIF/in */
|
|
|
|
cmpci_reg_set_4(sc,
|
|
|
|
CMPCI_REG_FUNC_1,
|
|
|
|
CMPCI_REG_SPDIF1_ENABLE);
|
|
|
|
} else {
|
|
|
|
cmpci_reg_clear_4(sc,
|
|
|
|
CMPCI_REG_FUNC_1,
|
|
|
|
CMPCI_REG_SPDIF1_ENABLE);
|
|
|
|
}
|
|
|
|
}
|
2000-05-01 01:59:58 +04:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_set_port(void *handle, mixer_ctrl_t *cp)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
struct cmpci_softc *sc;
|
2000-05-01 01:59:58 +04:00
|
|
|
int lgain, rgain;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
sc = handle;
|
2000-05-01 01:59:58 +04:00
|
|
|
switch (cp->dev) {
|
|
|
|
case CMPCI_MIC_VOL:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_PCSPEAKER:
|
|
|
|
case CMPCI_MIC_RECVOL:
|
|
|
|
if (cp->un.value.num_channels != 1)
|
|
|
|
return EINVAL;
|
|
|
|
/* FALLTHROUGH */
|
|
|
|
case CMPCI_DAC_VOL:
|
2000-05-01 01:59:58 +04:00
|
|
|
case CMPCI_FM_VOL:
|
|
|
|
case CMPCI_CD_VOL:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_LINE_IN_VOL:
|
|
|
|
case CMPCI_AUX_IN_VOL:
|
2000-05-01 01:59:58 +04:00
|
|
|
case CMPCI_MASTER_VOL:
|
|
|
|
if (cp->type != AUDIO_MIXER_VALUE)
|
|
|
|
return EINVAL;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
switch (cp->un.value.num_channels) {
|
|
|
|
case 1:
|
2000-05-01 01:59:58 +04:00
|
|
|
lgain = rgain =
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO];
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case 2:
|
|
|
|
lgain = cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT];
|
|
|
|
rgain = cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT];
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
|
|
|
default:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
return EINVAL;
|
2000-05-01 01:59:58 +04:00
|
|
|
}
|
2001-02-12 21:47:12 +03:00
|
|
|
sc->sc_gain[cp->dev][CMPCI_LEFT] = lgain;
|
|
|
|
sc->sc_gain[cp->dev][CMPCI_RIGHT] = rgain;
|
2000-05-01 01:59:58 +04:00
|
|
|
|
|
|
|
cmpci_set_mixer_gain(sc, cp->dev);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case CMPCI_RECORD_SOURCE:
|
|
|
|
if (cp->type != AUDIO_MIXER_SET)
|
|
|
|
return EINVAL;
|
2001-09-04 17:36:07 +04:00
|
|
|
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
if (cp->un.mask & ~(CMPCI_RECORD_SOURCE_MIC |
|
|
|
|
CMPCI_RECORD_SOURCE_CD | CMPCI_RECORD_SOURCE_LINE_IN |
|
|
|
|
CMPCI_RECORD_SOURCE_AUX_IN | CMPCI_RECORD_SOURCE_WAVE |
|
|
|
|
CMPCI_RECORD_SOURCE_FM | CMPCI_RECORD_SOURCE_SPDIF))
|
|
|
|
return EINVAL;
|
|
|
|
|
2001-09-04 17:36:07 +04:00
|
|
|
if (cp->un.mask & CMPCI_RECORD_SOURCE_SPDIF)
|
|
|
|
cp->un.mask = CMPCI_RECORD_SOURCE_SPDIF;
|
|
|
|
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
sc->sc_in_mask = cp->un.mask;
|
|
|
|
return cmpci_set_in_ports(sc);
|
2000-05-01 01:59:58 +04:00
|
|
|
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
/* boolean */
|
|
|
|
case CMPCI_DAC_MUTE:
|
|
|
|
case CMPCI_FM_MUTE:
|
|
|
|
case CMPCI_CD_MUTE:
|
|
|
|
case CMPCI_LINE_IN_MUTE:
|
|
|
|
case CMPCI_AUX_IN_MUTE:
|
|
|
|
case CMPCI_MIC_MUTE:
|
|
|
|
case CMPCI_MIC_PREAMP:
|
|
|
|
case CMPCI_PLAYBACK_MODE:
|
|
|
|
case CMPCI_SPDIF_IN_PHASE:
|
|
|
|
case CMPCI_SPDIF_LOOP:
|
|
|
|
case CMPCI_SPDIF_OUT_PLAYBACK:
|
|
|
|
case CMPCI_SPDIF_OUT_VOLTAGE:
|
|
|
|
case CMPCI_REAR:
|
|
|
|
case CMPCI_INDIVIDUAL:
|
|
|
|
case CMPCI_REVERSE:
|
|
|
|
case CMPCI_SURROUND:
|
2000-05-01 01:59:58 +04:00
|
|
|
if (cp->type != AUDIO_MIXER_ENUM)
|
|
|
|
return EINVAL;
|
2001-02-12 21:47:12 +03:00
|
|
|
sc->sc_gain[cp->dev][CMPCI_LR] = cp->un.ord != 0;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
cmpci_set_mixer_gain(sc, cp->dev);
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
|
|
|
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_SPDIF_IN_SELECT:
|
|
|
|
switch (cp->un.ord) {
|
|
|
|
case CMPCI_SPDIF_IN_SPDIN1:
|
|
|
|
case CMPCI_SPDIF_IN_SPDIN2:
|
|
|
|
case CMPCI_SPDIF_IN_SPDOUT:
|
|
|
|
break;
|
|
|
|
default:
|
2000-05-01 01:59:58 +04:00
|
|
|
return EINVAL;
|
|
|
|
}
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
goto xenum;
|
|
|
|
case CMPCI_MONITOR_DAC:
|
|
|
|
switch (cp->un.ord) {
|
|
|
|
case CMPCI_MONITOR_DAC_OFF:
|
|
|
|
case CMPCI_MONITOR_DAC_SPDIN:
|
|
|
|
case CMPCI_MONITOR_DAC_SPDOUT:
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return EINVAL;
|
2000-05-01 01:59:58 +04:00
|
|
|
}
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
xenum:
|
|
|
|
if (cp->type != AUDIO_MIXER_ENUM)
|
|
|
|
return EINVAL;
|
2001-02-12 21:47:12 +03:00
|
|
|
sc->sc_gain[cp->dev][CMPCI_LR] = cp->un.ord;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
cmpci_set_mixer_gain(sc, cp->dev);
|
2001-02-12 21:47:12 +03:00
|
|
|
break;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
default:
|
|
|
|
return EINVAL;
|
|
|
|
}
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_get_port(void *handle, mixer_ctrl_t *cp)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
struct cmpci_softc *sc;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
sc = handle;
|
2000-05-01 01:59:58 +04:00
|
|
|
switch (cp->dev) {
|
|
|
|
case CMPCI_MIC_VOL:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_PCSPEAKER:
|
|
|
|
case CMPCI_MIC_RECVOL:
|
2000-05-01 01:59:58 +04:00
|
|
|
if (cp->un.value.num_channels != 1)
|
|
|
|
return EINVAL;
|
2001-12-27 17:17:04 +03:00
|
|
|
/*FALLTHROUGH*/
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_DAC_VOL:
|
2000-05-01 01:59:58 +04:00
|
|
|
case CMPCI_FM_VOL:
|
|
|
|
case CMPCI_CD_VOL:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_LINE_IN_VOL:
|
|
|
|
case CMPCI_AUX_IN_VOL:
|
2000-05-01 01:59:58 +04:00
|
|
|
case CMPCI_MASTER_VOL:
|
|
|
|
switch (cp->un.value.num_channels) {
|
|
|
|
case 1:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_MONO] =
|
2001-02-12 21:47:12 +03:00
|
|
|
sc->sc_gain[cp->dev][CMPCI_LEFT];
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
|
|
|
case 2:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_LEFT] =
|
2001-02-12 21:47:12 +03:00
|
|
|
sc->sc_gain[cp->dev][CMPCI_LEFT];
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
cp->un.value.level[AUDIO_MIXER_LEVEL_RIGHT] =
|
2001-02-12 21:47:12 +03:00
|
|
|
sc->sc_gain[cp->dev][CMPCI_RIGHT];
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return EINVAL;
|
|
|
|
}
|
|
|
|
break;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
case CMPCI_RECORD_SOURCE:
|
2001-02-12 21:47:12 +03:00
|
|
|
cp->un.mask = sc->sc_in_mask;
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
|
|
|
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_DAC_MUTE:
|
|
|
|
case CMPCI_FM_MUTE:
|
|
|
|
case CMPCI_CD_MUTE:
|
2000-05-01 01:59:58 +04:00
|
|
|
case CMPCI_LINE_IN_MUTE:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_AUX_IN_MUTE:
|
|
|
|
case CMPCI_MIC_MUTE:
|
|
|
|
case CMPCI_MIC_PREAMP:
|
|
|
|
case CMPCI_PLAYBACK_MODE:
|
|
|
|
case CMPCI_SPDIF_IN_SELECT:
|
|
|
|
case CMPCI_SPDIF_IN_PHASE:
|
2001-02-12 21:47:12 +03:00
|
|
|
case CMPCI_SPDIF_LOOP:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_SPDIF_OUT_PLAYBACK:
|
2001-02-12 21:47:12 +03:00
|
|
|
case CMPCI_SPDIF_OUT_VOLTAGE:
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
case CMPCI_MONITOR_DAC:
|
2001-02-12 21:47:12 +03:00
|
|
|
case CMPCI_REAR:
|
|
|
|
case CMPCI_INDIVIDUAL:
|
|
|
|
case CMPCI_REVERSE:
|
|
|
|
case CMPCI_SURROUND:
|
|
|
|
cp->un.ord = sc->sc_gain[cp->dev][CMPCI_LR];
|
2000-05-01 01:59:58 +04:00
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ARGSUSED */
|
|
|
|
static size_t
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_round_buffersize(void *handle, int direction, size_t bufsize)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
if (bufsize > 0x10000)
|
|
|
|
bufsize = 0x10000;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
return bufsize;
|
|
|
|
}
|
|
|
|
|
2000-06-26 08:55:19 +04:00
|
|
|
static paddr_t
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_mappage(void *handle, void *addr, off_t offset, int prot)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
|
|
|
struct cmpci_dmanode *p;
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
if (offset < 0 || NULL == (p = cmpci_find_dmamem(handle, addr)))
|
2000-05-01 01:59:58 +04:00
|
|
|
return -1;
|
|
|
|
|
|
|
|
return bus_dmamem_mmap(p->cd_tag, p->cd_segs,
|
2001-02-12 21:47:12 +03:00
|
|
|
sizeof(p->cd_segs)/sizeof(p->cd_segs[0]),
|
|
|
|
offset, prot, BUS_DMA_WAITOK);
|
2000-05-01 01:59:58 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
/* ARGSUSED */
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_get_props(void *handle)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
return AUDIO_PROP_MMAP | AUDIO_PROP_INDEPENDENT | AUDIO_PROP_FULLDUPLEX;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_trigger_output(void *handle, void *start, void *end, int blksize,
|
|
|
|
void (*intr)(void *), void *arg,
|
|
|
|
const audio_params_t *param)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
struct cmpci_softc *sc;
|
2000-05-01 01:59:58 +04:00
|
|
|
struct cmpci_dmanode *p;
|
|
|
|
int bps;
|
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
sc = handle;
|
2000-05-01 01:59:58 +04:00
|
|
|
sc->sc_play.intr = intr;
|
|
|
|
sc->sc_play.intr_arg = arg;
|
merge kent-audio1 branch, which introduces audio filter pipeline to the MI
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
|
|
|
bps = param->channels * param->precision / 8;
|
2000-05-01 01:59:58 +04:00
|
|
|
if (!bps)
|
|
|
|
return EINVAL;
|
|
|
|
|
|
|
|
/* set DMA frame */
|
|
|
|
if (!(p = cmpci_find_dmamem(sc, start)))
|
|
|
|
return EINVAL;
|
|
|
|
bus_space_write_4(sc->sc_iot, sc->sc_ioh, CMPCI_REG_DMA0_BASE,
|
|
|
|
DMAADDR(p));
|
|
|
|
delay(10);
|
|
|
|
bus_space_write_2(sc->sc_iot, sc->sc_ioh, CMPCI_REG_DMA0_BYTES,
|
2001-02-12 21:47:12 +03:00
|
|
|
((caddr_t)end - (caddr_t)start + 1) / bps - 1);
|
2000-05-01 01:59:58 +04:00
|
|
|
delay(10);
|
|
|
|
|
|
|
|
/* set interrupt count */
|
|
|
|
bus_space_write_2(sc->sc_iot, sc->sc_ioh, CMPCI_REG_DMA0_SAMPLES,
|
|
|
|
(blksize + bps - 1) / bps - 1);
|
|
|
|
delay(10);
|
|
|
|
|
|
|
|
/* start DMA */
|
|
|
|
cmpci_reg_clear_4(sc, CMPCI_REG_FUNC_0, CMPCI_REG_CH0_DIR); /* PLAY */
|
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_INTR_CTRL, CMPCI_REG_CH0_INTR_ENABLE);
|
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_FUNC_0, CMPCI_REG_CH0_ENABLE);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2005-01-15 18:19:51 +03:00
|
|
|
cmpci_trigger_input(void *handle, void *start, void *end, int blksize,
|
|
|
|
void (*intr)(void *), void *arg,
|
|
|
|
const audio_params_t *param)
|
2000-05-01 01:59:58 +04:00
|
|
|
{
|
2005-01-15 18:19:51 +03:00
|
|
|
struct cmpci_softc *sc;
|
2000-05-01 01:59:58 +04:00
|
|
|
struct cmpci_dmanode *p;
|
|
|
|
int bps;
|
|
|
|
|
2005-01-15 18:19:51 +03:00
|
|
|
sc = handle;
|
2000-05-01 01:59:58 +04:00
|
|
|
sc->sc_rec.intr = intr;
|
|
|
|
sc->sc_rec.intr_arg = arg;
|
merge kent-audio1 branch, which introduces audio filter pipeline to the MI
audio framework
Summary of changes:
* struct audio_params
- remove sw_code, factor, factor_denom, hw_sample_rate,
hw_encoding ,hw_precision, and hw_channels. Conversion information
is conveyed by stream_filter_list_t.
- change the type of sample_rate: u_long -> u_int
- add `validbits,' which represents the valid data size in
precision bits. It is required in order to distinguish 24/32bit
from 24/24bit or 32/32bit.
* audio_hw_if
- add two parameters to set_params()
stream_filter_list_t *pfil, stream_filter_list *rfil
A HW driver should set filter recipes for requested formats
- constify audio_params parameters of trigger_output() and
trigger_input(). They represent audio formats for the hardware.
- make open() and close() optional
- add int (AUMODE_PLAY or AUMODE_RECORD) and audio_params_t parameters
to round_blocksize()
* sw_code is replaced with stream_filter_t.
stream_filer_t converts audio data in an input buffer and writes
into another output buffer unlike sw_code, which converts data in
single buffer.
converters in dev/auconv.c, dev/mulaw.c, dev/aurateconv.c,
dev/tc/bba.c, dev/ic/msm6258.c, and arch/arm/iomd/vidcaudio.c are
reimplemented as stream_filter_t
* MI audio
- audiosetinfo() builds filter pipelines from stream_filter_list_t
filled by audio_hw_if::set_params()
- audiosetinfo() returns with EINVAL if mmapped and set_params()
requests filters
- audio_write(), audio_pint(), and audio_rint() invoke a filter
pipeline.
- ioctl() for FIONREAD, AUDIO_WSEEK, AUDIO_GETIOFFS,
AUDIO_GETOOFFS, and audio_prinfo::{seek,samples} for
AUDIO_GETINFO handle values for a buffer nearest to userland.
* add `struct device *' parameter to ac97_attach()
* all of audio HW drivers follow audio_hw_if and ac97 changes
2005-01-11 01:01:36 +03:00
|
|
|
bps = param->channels * param->precision / 8;
|
2000-05-01 01:59:58 +04:00
|
|
|
if (!bps)
|
|
|
|
return EINVAL;
|
|
|
|
|
|
|
|
/* set DMA frame */
|
|
|
|
if (!(p=cmpci_find_dmamem(sc, start)))
|
|
|
|
return EINVAL;
|
|
|
|
bus_space_write_4(sc->sc_iot, sc->sc_ioh, CMPCI_REG_DMA1_BASE,
|
|
|
|
DMAADDR(p));
|
|
|
|
delay(10);
|
|
|
|
bus_space_write_2(sc->sc_iot, sc->sc_ioh, CMPCI_REG_DMA1_BYTES,
|
2001-02-12 21:47:12 +03:00
|
|
|
((caddr_t)end - (caddr_t)start + 1) / bps - 1);
|
2000-05-01 01:59:58 +04:00
|
|
|
delay(10);
|
|
|
|
|
|
|
|
/* set interrupt count */
|
|
|
|
bus_space_write_2(sc->sc_iot, sc->sc_ioh, CMPCI_REG_DMA1_SAMPLES,
|
2001-02-12 21:47:12 +03:00
|
|
|
(blksize + bps - 1) / bps - 1);
|
2000-05-01 01:59:58 +04:00
|
|
|
delay(10);
|
|
|
|
|
|
|
|
/* start DMA */
|
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_FUNC_0, CMPCI_REG_CH1_DIR); /* REC */
|
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_INTR_CTRL, CMPCI_REG_CH1_INTR_ENABLE);
|
|
|
|
cmpci_reg_set_4(sc, CMPCI_REG_FUNC_0, CMPCI_REG_CH1_ENABLE);
|
Re-implement the mixer
o Implement SPDIF selection/monitoring function.
Now, say, playback to both analog output and SPDIF is possible.
o Implement support of AUX input, MIC preamp and MIC recording gain.
o L-R selection of record source doesn't seem to work on cmpci.
Therefore, the *.swap mixer functions are and deleted.
o Following SB mixer registers don't exist on cmpci, and they are removed.
input gain, output gain, AGC, equalization (bass, treble)
o Other mixer changes, including
inputs.XXX.mute -> (deleted)
outputs.XXX.mute -> inputs.XXX.mute
inputs.pc_speaker -> inputs.speaker
spdif.* -> reorganized to spdif.input.*, spdif.output.*
o Current status:
I have tested these and confirmed to work fine.
- Output and recording from Line-in, AUX, CD and MIC analog inputs,
- Output and recording from FM synthesizer,
- Output from PC speaker input,
- Output wave playback.
- SPDIF (44.1kHz) input selection (#1, #2 (6ch version only),
wave to spdin), phase selection, monitoring and recording,
- SPDIF (44.1kHz) playback, through (SPDIF in to SPDIF out)
and monitoring.
I haven't tested these but may work.
- SPDIF 48kHz input and output,
- Full-duplex operation,
- Recording wave output.
I don't think these are working.
- Legacy (wave + FM synthesizer) to SPDIF output (and the monitoring),
- Exchanging front and rear outputs,
- Surround.
These are not implemented.
- 4ch / 6ch support,
- Joystick port support.
2001-11-04 09:57:40 +03:00
|
|
|
|
2000-05-01 01:59:58 +04:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* end of file */
|