NetBSD/share/man/man8/compat_freebsd.8

378 lines
11 KiB
Groff
Raw Normal View History

.\" $NetBSD: compat_freebsd.8,v 1.6 1999/03/17 20:31:19 garbled Exp $
1996-08-09 22:03:16 +04:00
.\" from: compat_linux.8,v 1.1 1995/03/05 23:30:36 fvdl Exp
.\"
.\" Copyright (c) 1995 Frank van der Linden
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed for the NetBSD Project
.\" by Frank van der Linden
.\" 4. The name of the author may not be used to endorse or promote products
.\" derived from this software without specific prior written permission
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.Dd June 4, 1995
.Dt COMPAT_FREEBSD 8
.Os
1996-08-09 22:03:16 +04:00
.Sh NAME
.Nm compat_freebsd
1996-08-09 22:03:16 +04:00
.Nd setup procedure for running FreeBSD binaries
.Sh DESCRIPTION
.Nx
supports running
.Fx
binaries.
Most binaries should work, except programs that use
.Fx Ns -specific
features.
These include i386-specific calls, such as syscons utilities.
The
.Fx
compatibility feature is active for kernels compiled
1996-08-09 22:03:16 +04:00
with the
.Dv COMPAT_FREEBSD
1996-08-09 22:03:16 +04:00
option enabled.
.Pp
1996-08-09 22:03:16 +04:00
A lot of programs are dynamically linked. This means, that you will
also need the
.Fx
shared libraries that the program depends on, and the runtime
linker.
Also, you will need to create a "shadow root" directory for
.Fx
binaries on your
.Nx
system. This directory
is named
.Pa /emul/freebsd .
Any file operations done by
.Fx
programs run under
.Nx
will look in this directory first.
So, if a
.Fx
program opens, for example,
.Pa /etc/passwd ,
.Nx
will
first try to open
.Pa /emul/freebsd/etc/passwd ,
and if that does not exist open the 'real'
.Pa /etc/passwd
file.
It is recommended that you install
.Fx
packages that include configuration files, etc under
.Pa /emul/freebsd ,
to avoid naming conflicts with possible
.Nx
counterparts. Shared
1996-08-09 22:03:16 +04:00
libraries should also be installed in the shadow tree.
.Pp
Generally, you will need to look for the shared libraries that
.Fx
binaries depend on only the first few times that you install a
.Fx
program on your
.Nx
system. After a while, you will have a sufficient
set of
.Fx
shared libraries on your system to be able to run newly
imported
.Fx
binaries without any extra work.
1996-08-09 22:03:16 +04:00
.Ss Setting up shared libraries
How to get to know which shared libraries
.Fx
binaries need, and where
1996-08-09 22:03:16 +04:00
to get them? Basically, there are 2 possibilities (when following
these instructions: you will need to be root on your
.Nx
system to do the necessary installation steps).
1996-08-09 22:03:16 +04:00
.Bl -tag -width 123 -compact
.It 1.
You have access to a
.Fx
system.
In this case you can temporarily install the binary there, see what
shared libraries it needs, and copy them to your
.Nx
system.
Example: you have just ftp-ed the
.Fx
binary of SimCity.
Put it on the
.Fx
1996-08-09 22:03:16 +04:00
system you have access to, and check which shared libraries it
needs by running `ldd sim':
.Pp
.Bl -tag -width 123 -compact -offset indent
.It me@freebsd% ldd /usr/local/lib/SimCity/res/sim
.nf
/usr/local/lib/SimCity/res/sim:
-lXext.6 => /usr/X11R6/lib/libXext.so.6.0 (0x100c1000)
-lX11.6 => /usr/X11R6/lib/libX11.so.6.0 (0x100c9000)
-lc.2 => /usr/lib/libc.so.2.1 (0x10144000)
-lm.2 => /usr/lib/libm.so.2.0 (0x101a7000)
-lgcc.261 => /usr/lib/libgcc.so.261.0 (0x101bf000)
.fi
.El
.Pp
You would need go get all the files from the last column, and
put them under
.Pa /emul/freebsd .
This means you eventually have these files on your
.Nx
system:
1996-08-09 22:03:16 +04:00
.Pp
.nf
.Pa /emul/freebsd/usr/X11R6/lib/libXext.so.6.0
.Pa /emul/freebsd/usr/X11R6/lib/libX11.so.6.0
.Pa /emul/freebsd/usr/lib/libc.so.2.1
.Pa /emul/freebsd/usr/lib/libm.so.2.0
.Pa /emul/freebsd/usr/lib/libgcc.so.261.0
1996-08-09 22:03:16 +04:00
.fi
.Pp
Note that if you already have a
.Fx
shared library with a matching major revision number to the first
column of the 'ldd' output, you won't need to copy the file named
in the last column to your system, the one you already have should
work.
It is advisable to copy the shared library anyway if it is a newer version,
though.
You can remove the old one.
So, if you have these libraries on your system:
1996-08-09 22:03:16 +04:00
.Pp
.nf
.Pa /emul/freebsd/usr/lib/libc.so.2.0
1996-08-09 22:03:16 +04:00
.fi
.Pp
and you find that the ldd output for a new binary you want to
install is:
.Pp
.nf
\-lc.2 => /usr/lib/libc.so.2.1 (0x10144000)
1996-08-09 22:03:16 +04:00
.fi
.Pp
You won't need to worry about copying
.Pa /usr/lib/libc.so.2.1 too ,
1996-08-09 22:03:16 +04:00
because the program should work fine with the slightly older version.
You can decide to replace the libc.so anyway, and that should leave
you with:
.Pp
.nf
.Pa /emul/freebsd/usr/lib/libc.so.2.1
1996-08-09 22:03:16 +04:00
.fi
.Pp
Finally, you must make sure that you have the
.Fx
runtime linker and its config files on your system.
You should copy these files from the
.Fx
system to their appropriate place on your
.Nx
system (in the
.Pa /emul/freebsd
tree):
1996-08-09 22:03:16 +04:00
.Pp
.nf
.Pa usr/libexec/ld.so
.Pa var/run/ld.so.hints
1996-08-09 22:03:16 +04:00
.fi
.Pp
.It 2.
You don't have access to a
.Fx
system. In that case, you
1996-08-09 22:03:16 +04:00
should get the extra files you need from various ftp sites.
Information on where to look for the various files is appended
below. For now, let's assume you know where to get the files.
.Pp
Retrieve the following files (from _one_ ftp site to avoid
any version mismatches), and install them under /emul/freebsd
(i.e. foo/bar is installed as /emul/freebsd/foo/bar):
.Pp
.nf
.Pa sbin/ldconfig
.Pa usr/bin/ldd
.Pa usr/lib/libc.so.x.y.z
.Pa usr/libexec/ld.so
1996-08-09 22:03:16 +04:00
.fi
.Pp
ldconfig and ldd don't necessarily need to be under
.Pa /emul/freebsd ,
1996-08-09 22:03:16 +04:00
you can install them elsewhere in the system too. Just make sure
they don't conflict with their
.Nx
counterparts.
A good idea would be to install them in
.Pa /usr/local/bin
as ldconfig-freebsd and ldd-freebsd.
1996-08-09 22:03:16 +04:00
.Pp
Run the
.Fx
ldconfig program with directory arguments in which the
.Fx
runtime linker should look for shared libs.
.Pa /usr/lib
are standard, you could run like the following:
1996-08-09 22:03:16 +04:00
.Pp
.Bl -tag -width 123 -compact -offset indent
.It me@netbsd% mkdir -p /emul/freebsd/var/run
.It me@netbsd% touch /emul/freebsd/var/run/ld.so.hints
.It me@netbsd% ldconfig-freebsd /usr/X11R6/lib /usr/local/lib
.El
.Pp
Note that argument directories of ldconfig are
mapped to
.Pa /emul/freebsd/XXXX
by
.Nx Ns 's
compat code, and should exist as such on your system.
Make sure
.Pa /emul/freebsd/var/run/ld.so.hints
is existing when you run
.Fx Ns 's
ldconfig, if not, you may lose
.Nx Ns 's
.Pa /var/run/ld.so.hints.
.Fx
ldconfig should be statically
1996-08-09 22:03:16 +04:00
linked, so it doesn't need any shared libraries by itself.
It will create the file
.Pa /emul/freebsd/var/run/ld.so.hints.
You should rerun the
.Fx
version of the ldconfig program each time you add a new shared library.
1996-08-09 22:03:16 +04:00
.Pp
You should now be set up for
.Fx
binaries which only need a shared libc.
You can test this by running the
.Fx
ldd on itself.
Suppose that you have it installed as ldd-freebsd, it
1996-08-09 22:03:16 +04:00
should produce something like:
.Pp
.Bl -tag -width 123 -compact -offset indent
.It me@netbsd% ldd-freebsd `which ldd-freebsd`
.nf
/usr/local/bin/ldd-freebsd:
-lc.2 => /usr/lib/libc.so.2.1 (0x1001a000)
.fi
.El
.Pp
This being done, you are ready to install new
.Fx
binaries.
Whenever you install a new
.Fx
program, you should check if it needs shared libraries, and if so,
whether you have them installed in the
.Pa /emul/freebsd
tree.
To do this, you run the
.Fx
version ldd on the new program, and watch its output.
ldd (see also the manual page for
.Xr ldd 1 )
will print a list
1996-08-09 22:03:16 +04:00
of shared libraries that the program depends on, in the
form -l<majorname> => <fullname>.
.Pp
If it prints "not found" in stead of <fullname> it means that
you need an extra library.
Which library this is, is shown
1996-08-09 22:03:16 +04:00
in <majorname>, which will be of the form XXXX.<N>
You will need to find a libXXXX.so.<N>.<mm> on a
.Fx
ftp site,
and install it on your system.
The XXXX (name) and <N> (major
1996-08-09 22:03:16 +04:00
revision number) should match; the minor number(s) <mm> are
less important, though it is advised to take the most
recent version.
.El
.Ss Finding the necessary files.
.Em Note:
the information below is valid as of the time this
document was written (June, 1995), but certain details
1996-08-09 22:03:16 +04:00
such as names of ftp sites, directories and distribution names
may have changed by the time you read this.
.Pp
The
.Fx
distribution is available on a lot of ftp sites.
Sometimes the files are unpacked, and you can get the individual
files you need, but mostly they are stored in distribution sets,
usually consisting of subdirectories with gzipped tar files in them.
The primary ftp sites for the distributions are:
1996-08-09 22:03:16 +04:00
.Pp
.nf
ftp.freebsd.org:/pub/FreeBSD
.fi
.Pp
Mirror sites are described on:
.Pp
.nf
ftp.freebsd.org:/pub/FreeBSD/MIRROR.SITES
.fi
.Pp
This distribution consists of a number of tar-ed and gzipped files,
Normally, they're controlled by an install program, but you can
retrieve files "by hand" too.
The way to look something up is to retrieve all the files in the
distribution, and ``tar ztvf'' through them for the file you need.
Here is an example of a list of files that you might need.
1996-08-09 22:03:16 +04:00
.Pp
.Bd -unfilled -offset indent
Needed Files
ld.so 2.0-RELEASE/bindist/bindist.??
ldconfig 2.0-RELEASE/bindist/bindist.??
ldd 2.0-RELEASE/bindist/bindist.??
libc.so.2 2.0-RELEASE/bindist/bindist.??
libX11.so.6.0 2.0-RELEASE/XFree86-3.1/XFree86-3.1-bin.tar.gz
libX11.so.6.0 XFree86-3.1.1/X311bin.tgz
libXt.so.6.0 2.0-RELEASE/XFree86-3.1/XFree86-3.1-bin.tar.gz
libXt.so.6.0 XFree86-3.1.1/X311bin.tgz
.\" libX11.so.3 oldlibs
.\" libXt.so.3 oldlibs
.Ed
.Pp
The Files called ``bindist.??'' are tar-ed, gzipped and split,
so you can extract contents by ``cat bindist.?? | tar zpxf -''.
.Pp
Extract the files from these gzipped tarfiles in your
.Pa /emul/freebsd
directory (possibly omitting or afterwards removing files you don't
need), and you are done.
1996-08-09 22:03:16 +04:00
.Sh BUGS
The information about
.Fx
distributions may become outdated.