Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/usb/files.usb

224 lines
4.5 KiB
Plaintext
Raw Normal View History

udav*, for ether w/ Davicom DM9601 chipset. Shingo WATANABE
2003-08-22 09:13:29 +04:00
# $NetBSD: files.usb,v 1.51 2003/08/22 05:13:29 itojun Exp $
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
#
# Config file and device description for machine-independent USB code.
# Included by ports that need it. Ports that use it must provide
# their own "major" declarations for the appropriate devices.
- convert usage of "defopt" to "defflag" where the relevant option does not support a value (e.g., it's to be used as "options FOO" instead of "options FOO=xxx"). options that take a value were converted to defparam recently. - minor whitespace & formatting cleanups
2001-11-28 13:21:10 +03:00
defflag USBVERBOSE
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
device usb { }
attach usb at usbus
whitespace police
2001-02-24 04:59:46 +03:00
file dev/usb/usb.c usb needs-flag
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
file dev/usb/usbdi.c usb
file dev/usb/usbdi_util.c usb
Add wscons attachments for USB keyboard.
1998-07-25 19:36:30 +04:00
file dev/usb/usb_mem.c usb
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
file dev/usb/usb_subr.c usb
file dev/usb/usb_quirks.c usb
# Hub driver
Add vendor/product/release locators. Added in frustration as my HID devices appeared as different devices after some plugging and unplugging. :-)
1999-05-16 17:51:05 +04:00
device uhub { [port = -1], [configuration = -1], [interface = -1],
[vendor = -1], [product = -1], [release = -1] }
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
attach uhub at usb
file dev/usb/uhub.c usb
attach uhub at uhub with uhub_uhub
Split the umodem driver into two parts: the part that emulates a tty over two bulk pipes, and the setup and status fiddling goo. This allows the former part to be shared by other drivers that need to look like a tty.
2000-01-25 11:12:58 +03:00
# Modem and com serial port "bus"
define ucombus {[ portno = -1 ]}
Add subroutines to download firmware into Cypress (formerly Anchor) EZ-USB chips.
2001-01-02 21:49:56 +03:00
# EZ-USB firmware loader
define ezload
file dev/usb/ezload.c ezload
Add stub for a modem driver.
1998-12-03 01:47:19 +03:00
# Audio devices
Rename the audio "bus" attribute audiobus to avoid confusion with audio device.
2002-04-22 13:41:19 +04:00
device uaudio: audiobus, auconv, mulaw, aurateconv
Add stub for a modem driver.
1998-12-03 01:47:19 +03:00
attach uaudio at uhub
file dev/usb/uaudio.c uaudio
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
initial commit of USB midi driver. - I tested only ROLAND UM-1 and YAMAHA UX256. These are not conforming to USB-MIDI spec, however these are similar to USB-MIDI. - Since I've not yet seen the "genuine" USB-MIDI device, I cannot test such devices although I wrote the codes for it. TODO: - clean up the codes. - umidi(4) manpage. - /dev/rmidi? is working well, but /dev/music seems not working correctly.
2001-01-31 02:26:47 +03:00
# MIDI devices
device umidi: midibus
attach umidi at uhub
file dev/usb/umidi.c umidi
file dev/usb/umidi_quirks.c umidi
Split the umodem driver into two parts: the part that emulates a tty over two bulk pipes, and the setup and status fiddling goo. This allows the former part to be shared by other drivers that need to look like a tty.
2000-01-25 11:12:58 +03:00
# Modem and com serial port
device ucom
attach ucom at ucombus
whitespace police
2001-02-24 04:59:46 +03:00
file dev/usb/ucom.c ucom | ucombus needs-flag
Split the umodem driver into two parts: the part that emulates a tty over two bulk pipes, and the setup and status fiddling goo. This allows the former part to be shared by other drivers that need to look like a tty.
2000-01-25 11:12:58 +03:00
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's not visible in the driver). Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for testing. XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 09:00:31 +03:00
Add stub for a modem driver.
1998-12-03 01:47:19 +03:00
# Generic devices
device ugen
attach ugen at uhub
whitespace police
2001-02-24 04:59:46 +03:00
file dev/usb/ugen.c ugen needs-flag
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's not visible in the driver). Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for testing. XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 09:00:31 +03:00
# HID
Only pull in HID processing if a driver needs it.
2001-12-29 13:50:55 +03:00
# HID "bus"
define uhidbus {[ reportid = -1 ]}
# HID processing
define hid
file dev/usb/hid.c hid
Introduce an extra driver level for HID devices, uhidev. This uhidev driver attaches to the hub, and HID drivers (ums, ukbd, and uhid) attach to uhidev. The reason for this change is that some HID devices report multiple components (like a keyboard and a mouse) using the same interface, but with different report identifiers. The report identifier can be specified with a locator for the HID drivers. Furthermore, change the ukbd driver to handle other formats than the boot protocol.
2001-12-28 20:32:36 +03:00
# HID root device for multiple report IDs
Only pull in HID processing if a driver needs it.
2001-12-29 13:50:55 +03:00
device uhidev: hid, uhidbus
Introduce an extra driver level for HID devices, uhidev. This uhidev driver attaches to the hub, and HID drivers (ums, ukbd, and uhid) attach to uhidev. The reason for this change is that some HID devices report multiple components (like a keyboard and a mouse) using the same interface, but with different report identifiers. The report identifier can be specified with a locator for the HID drivers. Furthermore, change the ukbd driver to handle other formats than the boot protocol.
2001-12-28 20:32:36 +03:00
attach uhidev at uhub
file dev/usb/uhidev.c uhidev
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# Generic HID devices
Only pull in HID processing if a driver needs it.
2001-12-29 13:50:55 +03:00
device uhid: hid
Introduce an extra driver level for HID devices, uhidev. This uhidev driver attaches to the hub, and HID drivers (ums, ukbd, and uhid) attach to uhidev. The reason for this change is that some HID devices report multiple components (like a keyboard and a mouse) using the same interface, but with different report identifiers. The report identifier can be specified with a locator for the HID drivers. Furthermore, change the ukbd driver to handle other formats than the boot protocol.
2001-12-28 20:32:36 +03:00
attach uhid at uhidbus
whitespace police
2001-02-24 04:59:46 +03:00
file dev/usb/uhid.c uhid needs-flag
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
Add stub for a modem driver.
1998-12-03 01:47:19 +03:00
# Keyboards
Only pull in HID processing if a driver needs it.
2001-12-29 13:50:55 +03:00
device ukbd: hid, wskbddev
Introduce an extra driver level for HID devices, uhidev. This uhidev driver attaches to the hub, and HID drivers (ums, ukbd, and uhid) attach to uhidev. The reason for this change is that some HID devices report multiple components (like a keyboard and a mouse) using the same interface, but with different report identifiers. The report identifier can be specified with a locator for the HID drivers. Furthermore, change the ukbd driver to handle other formats than the boot protocol.
2001-12-28 20:32:36 +03:00
attach ukbd at uhidbus
whitespace police
2001-02-24 04:59:46 +03:00
file dev/usb/ukbd.c ukbd needs-flag
Add ukbdmap.c.
1999-01-10 14:09:02 +03:00
file dev/usb/ukbdmap.c ukbd
Add stub for a modem driver.
1998-12-03 01:47:19 +03:00
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's not visible in the driver). Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for testing. XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 09:00:31 +03:00
# Mice
Only pull in HID processing if a driver needs it.
2001-12-29 13:50:55 +03:00
device ums: hid, wsmousedev
Introduce an extra driver level for HID devices, uhidev. This uhidev driver attaches to the hub, and HID drivers (ums, ukbd, and uhid) attach to uhidev. The reason for this change is that some HID devices report multiple components (like a keyboard and a mouse) using the same interface, but with different report identifiers. The report identifier can be specified with a locator for the HID drivers. Furthermore, change the ukbd driver to handle other formats than the boot protocol.
2001-12-28 20:32:36 +03:00
attach ums at uhidbus
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's not visible in the driver). Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for testing. XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 09:00:31 +03:00
file dev/usb/ums.c ums
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
# Printers
Add wscons attachments for USB keyboard.
1998-07-25 19:36:30 +04:00
device ulpt
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
attach ulpt at uhub
whitespace police
2001-02-24 04:59:46 +03:00
file dev/usb/ulpt.c ulpt needs-flag
Add USB support. Supported so far: * UHCI and OHCI host controllers on PCI * Hubs * HID devices withe special drivers for mouse and keyboard * Printers
1998-07-12 23:51:55 +04:00
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's not visible in the driver). Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for testing. XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 09:00:31 +03:00
Add vendor/product/release locators. Added in frustration as my HID devices appeared as different devices after some plugging and unplugging. :-)
1999-05-16 17:51:05 +04:00
# Mass storage
Add a preliminary version of a driver for In-System Designs non-standard ATA-over-BulkOnly protocol. The ISD chip can be found, e.g., in the Archos MP3 player. The driver still lacks real error handling.
2001-12-24 16:43:24 +03:00
device umass: scsi, atapi, ata
Remove some unneeded needs-flag.
1999-08-23 11:07:47 +04:00
attach umass at uhub
file dev/usb/umass.c umass
Add a preliminary version of a driver for In-System Designs non-standard ATA-over-BulkOnly protocol. The ISD chip can be found, e.g., in the Archos MP3 player. The driver still lacks real error handling.
2001-12-24 16:43:24 +03:00
file dev/usb/umass_isdata.c umass & wd
Introduce the new umass quirk table. Discussed with augustss.
2001-12-17 15:16:14 +03:00
file dev/usb/umass_quirks.c umass
Make the separation between wire protocol (umass.c) and command protocol (umass_scsipi.c) more distinct. It is now possible to add new command protocols with a minimum of change. The umassbus.[ch] files have been renamed umass_scsipi.[ch] since this reflects their purpose better.
2001-12-24 16:25:52 +03:00
file dev/usb/umass_scsipi.c umass & (scsibus | atapibus)
Add vendor/product/release locators. Added in frustration as my HID devices appeared as different devices after some plugging and unplugging. :-)
1999-05-16 17:51:05 +04:00
Add some files for ethernet adapters (the files are not there yet).
2000-01-16 12:40:07 +03:00
Add USB-IrDA bridge. Needs more testing.
2001-12-12 18:27:24 +03:00
# IrDA bridges
device uirda: irbus
attach uirda at uhub
file dev/usb/uirda.c uirda
Add the ustir driver, for SigmaTel STIr4200 USB/IrDA Bridge. Written by David Sainty <David.Sainty@dtsp.co.nz>.
2002-01-03 21:54:31 +03:00
# SigmaTel IrDA bridge
device ustir: irbus, irdasir
attach ustir at uhub
file dev/usb/ustir.c ustir
A placeholder until we have a real Bluetooth driver.
2002-08-22 14:15:57 +04:00
# Bluetooth bridges
Attach Bluetooth host controller driver (which has not been written) to ubt device.
2002-08-24 21:31:19 +04:00
device ubt: btbus
A placeholder until we have a real Bluetooth driver.
2002-08-22 14:15:57 +04:00
attach ubt at uhub
file dev/usb/ubt.c ubt
Add firmware downloader for BCM2033 (no firmware yet; waiting for OK from Broadcom).
2002-08-23 04:55:20 +04:00
# BCM2033 firmware download
device ubtbcmfw
attach ubtbcmfw at uhub
Add needs-flag for ubtbcmfw.
2002-08-24 21:27:53 +04:00
file dev/usb/ubtbcmfw.c ubtbcmfw needs-flag
Add firmware downloader for BCM2033 (no firmware yet; waiting for OK from Broadcom).
2002-08-23 04:55:20 +04:00
A placeholder until we have a real Bluetooth driver.
2002-08-22 14:15:57 +04:00
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's not visible in the driver). Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for testing. XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 09:00:31 +03:00
# Misc
Add a driver for the Rio 500 MP3 player. XXX This driver might go away again, since you can do it all with ugen. XXX But this driver is compatible with the Linux driver so there are XXX programs for it.
2000-04-14 18:20:02 +04:00
# Diamond Multimedia Rio 500
device urio
attach urio at uhub
whitespace police
2001-02-24 04:59:46 +03:00
file dev/usb/urio.c urio needs-flag
Add a driver for the Rio 500 MP3 player. XXX This driver might go away again, since you can do it all with ugen. XXX But this driver is compatible with the Linux driver so there are XXX programs for it.
2000-04-14 18:20:02 +04:00
Add driver for the Handspring Visor. This code probably doesn't work, because it has not been tested. Despite several pleas for testing there doesn't seem to be any Visor owners out there. Perhaps it will get tested if it's in -current? Anyway, the code can at least serve as a template for how to make a USB driver that shows up as a tty.
2000-03-30 20:56:19 +04:00
# Handspring Visor
device uvisor: ucombus
attach uvisor at uhub
file dev/usb/uvisor.c uvisor
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's not visible in the driver). Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for testing. XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 09:00:31 +03:00
# YAP phone firmware loader
device uyap: ezload
attach uyap at uhub
file dev/usb/uyap.c uyap
Add udsbr(4), a D-Link DSB-R100 FM radio (untested).
2002-01-02 06:21:36 +03:00
# D-Link DSB-R100 FM radio
"attach radio at radio": using one word as both attribute and device doesn't work well, radio.c is pulled in even with no such device in the configuration, and the kernel doesn't link due to missing "radio_cd". So call the attribute "radiodev" to avoid confusion.
2002-01-07 20:44:42 +03:00
device udsbr: radiodev
Add udsbr(4), a D-Link DSB-R100 FM radio (untested).
2002-01-02 06:21:36 +03:00
attach udsbr at uhub
file dev/usb/udsbr.c udsbr
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's not visible in the driver). Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for testing. XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 09:00:31 +03:00
Add some files for ethernet adapters (the files are not there yet).
2000-01-16 12:40:07 +03:00
# Ethernet adapters
# ADMtek AN986 Pegasus
Avoid linker error if no PHY is attached.
2000-02-14 23:29:54 +03:00
device aue: arp, ether, ifnet, mii, mii_phy
Add some files for ethernet adapters (the files are not there yet).
2000-01-16 12:40:07 +03:00
attach aue at uhub
file dev/usb/if_aue.c aue
# CATC USB-EL1201A
device cue: arp, ether, ifnet
attach cue at uhub
file dev/usb/if_cue.c cue
# Kawasaki LSI KL5KUSB101B
device kue: arp, ether, ifnet
attach kue at uhub
file dev/usb/if_kue.c kue
Add driver for Prolific PL2301/PL2302 host-to-host adapter.
2000-04-09 22:23:23 +04:00
# Prolific PL2302 host-host
device upl: ifnet
attach upl at uhub
file dev/usb/if_upl.c upl
Add driver for FTDI FT8U100AX serial adapter. XXX This is still experimental and needs more work.
2000-04-14 18:51:22 +04:00
add driver for Realtek RL8150L USB ethernet adapter distribute from Shingo WATANABE <nabe@nabechan.org>
2002-03-29 00:09:10 +03:00
# Realtek RTL8150L(M)
device url: arp, ether, ifnet, mii
attach url at uhub
file dev/usb/if_url.c url
Check in some work-in-progress (not yet operational).
2003-02-15 21:33:29 +03:00
# ASIX AX88172
device uax: arp, ether, ifnet, mii, mii_phy
attach uax at uhub
file dev/usb/if_uax.c uax
udav*, for ether w/ Davicom DM9601 chipset. Shingo WATANABE
2003-08-22 09:13:29 +04:00
# DAVICOM DM9601
device udav: arp, ether, ifnet, mii, mii_phy
attach udav at uhub
file dev/usb/if_udav.c udav
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's not visible in the driver). Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for testing. XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 09:00:31 +03:00
Add driver for FTDI FT8U100AX serial adapter. XXX This is still experimental and needs more work.
2000-04-14 18:51:22 +04:00
# Serial drivers
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's not visible in the driver). Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for testing. XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 09:00:31 +03:00
# Modems
device umodem: ucombus
attach umodem at uhub
file dev/usb/umodem.c umodem
Add driver for FTDI FT8U100AX serial adapter. XXX This is still experimental and needs more work.
2000-04-14 18:51:22 +04:00
# FTDI serial driver
device uftdi: ucombus
attach uftdi at uhub
file dev/usb/uftdi.c uftdi
Add USB scanner driver. XXX Not tested yet.
2000-09-23 08:32:23 +04:00
driver for Prolific PL2303 serial adapter. I/O DATA USB-USAQ2 work.
2001-01-23 04:24:10 +03:00
# Prolific PL2303 serial driver
device uplcom: ucombus
attach uplcom at uhub
file dev/usb/uplcom.c uplcom
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's not visible in the driver). Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for testing. XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 09:00:31 +03:00
support USB-RS232 Converter of Magic Control Technology Corp. More information about this product found at http://www.mct.com.tw
2001-03-28 22:42:13 +04:00
# MCT USB-232 serial driver
device umct: ucombus
attach umct at uhub
file dev/usb/umct.c umct
Add driver for SUNTAC Slipper U VS-10U serial devices. Written by Shunsuke Akiyama <akiyama@jp.FreeBSD.org>. From FreeBSD.
2002-03-19 18:08:42 +03:00
# SUNTAC Slipper U VS-10U driver
device uvscom: ucombus
attach uvscom at uhub
file dev/usb/uvscom.c uvscom
Add driver for Belkin (and other) serial adapter. From FreeBSD.
2002-10-08 17:08:02 +04:00
# Belkin & other serial driver
device ubsa: ucombus
attach ubsa at uhub
file dev/usb/ubsa.c ubsa
Introduce an extra driver level for HID devices, uhidev. This uhidev driver attaches to the hub, and HID drivers (ums, ukbd, and uhid) attach to uhidev. The reason for this change is that some HID devices report multiple components (like a keyboard and a mouse) using the same interface, but with different report identifiers. The report identifier can be specified with a locator for the HID drivers. Furthermore, change the ukbd driver to handle other formats than the boot protocol.
2001-12-28 20:32:36 +03:00
Add USB scanner driver. XXX Not tested yet.
2000-09-23 08:32:23 +04:00
# Scanners
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's not visible in the driver). Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for testing. XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 09:00:31 +03:00
# Generic scanner support
Add USB scanner driver. XXX Not tested yet.
2000-09-23 08:32:23 +04:00
device uscanner
attach uscanner at uhub
whitespace police
2001-02-24 04:59:46 +03:00
file dev/usb/uscanner.c uscanner needs-flag
Add a transient driver for the YAP phone that downloads firmware into the EZ-USB chip. After downloading the firmware the device detaches and then reattaches as a composite device (audio + HID). XXX For now there is no firmware committed since the vendor (Silicon XXX Portals) has not yet agreed that we can redistribute their firmware.
2001-01-02 21:52:44 +03:00
Add a driver for HP5300 which uses a homebrew SCSI-over-USB protocol. Furthermore, it uses Avisions scanner-over-SCSI protocol (but that's not visible in the driver). Thanks to Lloyd Parkes for testing and debugging and to Jukka Marin for testing. XXX This driver should be extended to handle Microtek scanners as well.
2001-01-11 09:00:31 +03:00
# Avision SCSI over USB, HP5300
device usscanner: scsi
attach usscanner at uhub
file dev/usb/usscanner.c usscanner