NetBSD/sys/dev/pci/if_ntwoc_pci.c

358 lines
10 KiB
C
Raw Normal View History

/* $Id: if_ntwoc_pci.c,v 1.1 1998/07/26 03:28:28 explorer Exp $ */
/*
* Copyright (c) 1998 Vixie Enterprises
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of Vixie Enterprises nor the names
* of its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY VIXIE ENTERPRISES AND
* CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
* INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL VIXIE ENTERPRISES OR
* CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
* USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* This software has been written for Vixie Enterprises by Michael Graff
* <explorer@flame.org>. To learn more about Vixie Enterprises, see
* ``http://www.vix.com''.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <net/if.h>
#include <machine/cpu.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcidevs.h>
#include <dev/ic/hd64570reg.h>
#include <dev/ic/hd64570var.h>
#include <dev/pci/if_ntwoc_pcireg.h>
#if 0
#define NTWO_DEBUG
#endif
#ifdef NTWO_DEBUG
#define NTWO_DPRINTF(x) printf x
#else
#define NTWO_DPRINTF(x)
#endif
/*
* Card specific config register location
*/
#define PCI_CBMA_ASIC 0x10 /* Configuration Base Memory Address */
#define PCI_CBMA_SCA 0x18
struct ntwoc_pci_softc {
/* Generic device stuff */
struct device sc_dev; /* Common to all devices */
/* PCI chipset glue */
pci_intr_handle_t *sc_ih; /* Interrupt handler */
pci_chipset_tag_t sc_sr; /* PCI chipset handle */
bus_space_tag_t sc_asic_iot; /* space cookie (for ASIC) */
bus_space_handle_t sc_asic_ioh; /* bus space handle (for ASIC) */
struct sca_softc sc_sca; /* the SCA itself */
};
static int ntwoc_pci_match __P((struct device *, struct cfdata *, void *));
static void ntwoc_pci_attach __P((struct device *, struct device *, void *));
static int ntwoc_intr __P((void *));
static void ntwoc_shutdown __P((void *sc));
static void ntwoc_dtr_callback __P((void *, int, int));
struct cfattach ntwoc_pci_ca = {
sizeof(struct ntwoc_pci_softc), ntwoc_pci_match, ntwoc_pci_attach,
};
/*
* Names for daughter card types. These match the NTWOC_DB_* defines.
*/
char *ntwoc_db_names[] = {
"V.35", "Unknown 0x01", "Test", "Unknown 0x03",
"RS232", "Unknown 0x05", "RS422", "None"
};
static int
ntwoc_pci_match(struct device *parent, struct cfdata *match, void *aux)
{
struct pci_attach_args *pa = (struct pci_attach_args *)aux;
if ((PCI_VENDOR(pa->pa_id) == PCI_VENDOR_RISCOM)
&& (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_RISCOM_N2))
return 1;
return 0;
}
static void
ntwoc_pci_attach(struct device *parent, struct device *self, void *aux)
{
struct ntwoc_pci_softc *sc = (void *)self;
struct pci_attach_args *pa = aux;
struct sca_softc *sca = &sc->sc_sca;
pci_intr_handle_t ih;
const char *intrstr;
pcireg_t csr;
u_int16_t frontend_cr;
u_int16_t db0, db1;
u_int numports;
printf(": N2 Serial Interface\n");
/*
* Map in the ASIC configuration space
*/
if (pci_mapreg_map(pa, PCI_CBMA_ASIC, PCI_MAPREG_TYPE_MEM, 0,
&sc->sc_asic_iot, &sc->sc_asic_ioh, NULL, NULL)) {
printf("%s: Can't map register space (ASIC)\n",
sc->sc_dev.dv_xname);
return;
}
/*
* Map in the serial controller configuration space
*/
if (pci_mapreg_map(pa, PCI_CBMA_SCA, PCI_MAPREG_TYPE_MEM, 0,
&sca->sc_iot, &sca->sc_ioh, NULL, NULL)) {
printf("%s: Can't map register space (SCA)\n",
sc->sc_dev.dv_xname);
return;
}
/*
* Enable the card
*/
csr = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG);
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_COMMAND_STATUS_REG, csr);
/*
* Map and establish the interrupt
*/
if (pci_intr_map(pa->pa_pc, pa->pa_intrtag, pa->pa_intrpin,
pa->pa_intrline, &ih)) {
printf("%s: couldn't map interrupt\n", sc->sc_dev.dv_xname);
return;
}
intrstr = pci_intr_string(pa->pa_pc, ih);
sc->sc_ih = pci_intr_establish(pa->pa_pc, ih, IPL_NET, ntwoc_intr, sc);
if (sc->sc_ih == NULL) {
printf("%s: couldn't establish interrupt",
sc->sc_dev.dv_xname);
if (intrstr != NULL)
printf(" at %s", intrstr);
printf("\n");
return;
}
printf("%s: interrupting at %s\n", sc->sc_dev.dv_xname, intrstr);
/*
* Perform total black magic. This is not only extremely
* disgusting, but it should be explained a lot more in the
* card's documentation.
*
* From what I gather, this does nothing more than configure the
* PCI to ISA translator ASIC the N2pci card uses.
*
* From the FreeBSD driver:
* offset
* 0x00 - Map Range - Mem-mapped to locate anywhere
* 0x04 - Re-Map - PCI address decode enable
* 0x18 - Bus Region - 32-bit bus, ready enable
* 0x1c - Master Range - include all 16 MB
* 0x20 - Master RAM - Map SCA Base at 0
* 0x28 - Master Remap - direct master memory enable
* 0x68 - Interrupt - Enable interrupt (0 to disable)
*/
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x00, 0xfffff000);
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x04, 1);
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x18, 0x40030043);
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x1c, 0xff000000);
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x20, 0);
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x28, 0xe9);
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x68, 0x10900);
/*
* pass the dma tag to the SCA
*/
sca->sc_dmat = pa->pa_dmat;
/*
* Read the configuration information off the daughter card.
*/
frontend_cr = bus_space_read_2(sca->sc_iot, sca->sc_ioh, NTWOC_FECR);
NTWO_DPRINTF(("%s: frontend_cr = 0x%04x\n",
sc->sc_dev.dv_xname, frontend_cr));
db0 = (frontend_cr & NTWOC_FECR_ID0) >> NTWOC_FECR_ID0_SHIFT;
db1 = (frontend_cr & NTWOC_FECR_ID1) >> NTWOC_FECR_ID1_SHIFT;
/*
* Port 1 HAS to be present. If it isn't, don't attach anything.
*/
if (db0 == NTWOC_FE_ID_NONE) {
printf("%s: no ports available\n", sc->sc_dev.dv_xname);
return;
}
/*
* Port 1 is present. Now, check to see if port 2 is also
* present.
*/
numports = 1;
if (db1 != NTWOC_FE_ID_NONE)
numports++;
printf("%s: %d port%s\n", sc->sc_dev.dv_xname, numports,
(numports > 1 ? "s" : ""));
printf("%s: port 0 interface card: %s\n", sc->sc_dev.dv_xname,
ntwoc_db_names[db0]);
if (numports > 1)
printf("%s: port 1 interface card: %s\n", sc->sc_dev.dv_xname,
ntwoc_db_names[db1]);
/*
* enable the RS422 tristate transmit
* diable clock output (use receiver clock for both)
*/
frontend_cr |= (NTWOC_FECR_TE0 | NTWOC_FECR_TE1);
frontend_cr &= ~(NTWOC_FECR_ETC0 | NTWOC_FECR_ETC1);
bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh,
NTWOC_FECR, frontend_cr);
/*
* initialize the SCA. This will allocate DMAable memory based
* on the number of ports we passed in, the size of each
* buffer, and the number of buffers per port.
*/
sca->parent = &sc->sc_dev;
sca->dtr_callback = ntwoc_dtr_callback;
sca->dtr_aux = sc;
sca_init(sca, numports);
/*
* always initialize port 0, since we have to have found it to
* get this far. If we have two ports, attach the second
* as well.
*/
sca_port_attach(sca, 0);
if (numports == 2)
sca_port_attach(sca, 1);
/*
* Add shutdown hook so that DMA is disabled prior to reboot. Not
* doing do could allow DMA to corrupt kernel memory during the
* reboot before the driver initializes.
*/
shutdownhook_establish(ntwoc_shutdown, sc);
}
static int
ntwoc_intr(void *arg)
{
struct ntwoc_pci_softc *sc = (struct ntwoc_pci_softc *)arg;
return sca_hardintr(&sc->sc_sca);
}
/*
* shut down interrupts and DMA, so we don't trash the kernel on warm
* boot. Also, lower DTR on each port and disable card interrupts.
*/
static void
ntwoc_shutdown(void *aux)
{
struct ntwoc_pci_softc *sc = aux;
u_int16_t fecr;
/*
* shut down the SCA ports
*/
sca_shutdown(&sc->sc_sca);
/*
* disable interupts for the whole card. Black magic, see comment
* above.
*/
bus_space_write_4(sc->sc_asic_iot, sc->sc_asic_ioh,
0x68, 0x10900);
/*
* lower DTR on both ports
*/
fecr = bus_space_read_2(sc->sc_sca.sc_iot,
sc->sc_sca.sc_ioh, NTWOC_FECR);
fecr |= (NTWOC_FECR_DTR0 | NTWOC_FECR_DTR1);
bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh,
NTWOC_FECR, fecr);
}
static void
ntwoc_dtr_callback(void *aux, int port, int state)
{
struct ntwoc_pci_softc *sc = aux;
u_int16_t fecr;
fecr = bus_space_read_2(sc->sc_sca.sc_iot,
sc->sc_sca.sc_ioh, NTWOC_FECR);
NTWO_DPRINTF(("port == %d, state == %d, old fecr: 0x%04x\n",
port, state, fecr));
if (port == 0) {
if (state == 0)
fecr |= NTWOC_FECR_DTR0;
else
fecr &= ~NTWOC_FECR_DTR0;
} else {
if (state == 0)
fecr |= NTWOC_FECR_DTR1;
else
fecr &= ~NTWOC_FECR_DTR1;
}
NTWO_DPRINTF(("new fecr: 0x%04x\n", fecr));
bus_space_write_2(sc->sc_sca.sc_iot, sc->sc_sca.sc_ioh,
NTWOC_FECR, fecr);
}