This commit allows a keycode_set to be specified as a module parameter
in xrdp.ini. This has the following effects:-
1) xrdp loads the specified keycode set for mapping RDP scancodes to
X11 keycodes. These are then passed to xorgxrdp as part of key press/
key release events.
2) The name of the XKB rules which use the specified keycode set are
passed to xorgxrdp so that XKB can be configured with rules which
match the chosen keycodes.
The effect is to remove all keycode set dependencies from xorgxrdp.
Normally evdev rules and evdev keycodes will be used but base rules and
base keycodes can be used instead for applications that require them.
Also, any systems which do not ship the evdev rules can be made to
work with base rules.
xrdp_load_keyboard_layout() is used exclusively by the xup module to
work out the parameters to pass to xorgxrdp for XKB. This function
does not need to be called locally from the SEC module.
This commit moves the function to xrdp/lang.c and renames it as
xrdp_init_xkb_layout(). The module interface is modified so that xup can
call this function. Other modules do not need to call it.
The mapping from scancodes to the indexes used in xrdp_keymap
is not well designed and contains an implicit dependency on
keycode values.
This mapping is alse slightly different from the index used for
the 'keys' map in the xrdp_wm structure.
This commit introduces support for mapping scancodes directly
to 'scancode indexes' suitable for indexing into both structures.
Some renaming is also done; [MS-RDPBCGR] uses the terms scancode
and keyCode interchangeably. An effort is made to use key_code for a
raw value from a TS_KEYBOARD_EVENT, and scancode for a value which is
produced by the scancode module.
6257dae74d added a mapping of RDP
scancodes to X11 keycodes to the XUP interface. The intention is
to move this functionality from xorgxrdp to a common lookup
in xrdp.
The mapping of RDP scancodes for extended keys (e.g. Right-CTRL) is
not being done correctly.
For key events, send the X11 keycode (currently based on evdev) to xorgxrdp
rather than the Unicode character mapping for the key. This gives us a
single source of truth for RDP scancode to X11 keycode mapping.
At present xorgxrdp doesn't use the Unicode character, so no change is
required at that end for this commit.
Input message 300 to xorgxrdp which communicated a screen size
has been replaced with message 302 which sends a list of monitors
to xorgxrdp. This simplifies the initialisation and resize logic
somewhat, but a compatible version of xorgxrdp must be used
This commit DOES NOT compile.
This change alters these module interface calls:-
1) mod_server_monitor_resize() (Call from xrdp to module). Updated.
2) server_reset() (Call from module to xrdp). Replaced.
The mod_server_monitor_resize() call is updated :-
1) to allow a monitor list to be passed in for a multimon resize
2) with an 'in_progress' return value which tells the caller whether or
not to expect a callback.
The server_reset() call served two purposes up until now:-
1) To allow a module to resize a single monitor session. There
is no way to request a multi-monitor resize from the module
2) (with bpp == 0) To signal to the mm resize state machine that
a server screen resize hsa finished.
This is split into two calls:-
1) client_monitor_resize() to allow a mdule to request a
multimon resize.
2) server_monitor_resize_done(). This is called by a module
when a resize is completed.
- Fixes MSTSC resizing (with RFX as well).
- Queue system so that resizes are processed when XRDP and the X server
are ready, not immediately.
- Deletes and recreates the encoder (RFX fix)
- Introduces a dynamic_monitor_description struct that is used for the
queue system.
- Fix some lines previously introduced by the original resizing code to
be 80 chars long, as is the standard for XRDP.
The connected client is currently described in two places in
the xrdp_client_info structure:-
1) In the connection_description field. This was introduced as
field client_ip by commit d797b2cf49
for xrdp v0.6.0
2) In the client_addr and client_port fields introduced by commit
25369460a1 for xrdp v0.8.0
This commit unifies these two sets of fields into a single
set of fields describing the connection IP and port (for
AF_INET/AF_INET6 connections only) and a connection description
for all connection types.
The code in os_calls to provide client logging has been simplified
somewhat which should make it easier to add new connection types (e.g.
AF_VSOCK).
The old connection_description field used to be passed to sesman to
inform sesman of the IP address of the client, and also to provide
a string for 'C' field session policy matching. 'C' field session policy
matching does not actually need this string (see #2239), and so now only
the IP field is passed to sesman.
There are a number of ways the existing transport connect logic in
trans_connect could be improved for POSIX compatibility, and also
slightly tidied up:-
1) The same socket is re-used for multiple connect attempts following
failure which isn't behaviour defined by POSIX.1-2017 (although it
works on Linux).
2) An asynchronous connect is started, and then after a short
delay connect() is called again on the same socket. POSIX.1-2017
is clear that in this situation EALREADY is returned before the
connection is established, but is silent on the behaviour expected
when the connection is established. Returning success is an option,
but so is returning EISCONN. The current code assumes the connect()
call will succeed.
3) The code contains two virtually identical, quite complex loops for
TCP and UNIX sockets, differing only in the calls to create a socket
and connect it.
4) trans_connect() contains looping and retry logic, but this isn't
seen as sufficient by the chansrv connect code in xrdp/xrdp_mm.c and
the Xorg connect code in xup/xup.c. Both of these implement their own
looping and retry logic on top of the logic in trans_connect(),
resulting in slightly unpredictable behaviour with regard to
timeouts.
5) A socket number can technically be zero, but in a couple of places
this isn't allowed for.
This PR attempts to correct the implementation of trans_connect(),
and also to simplify the areas it is called from.
As part of the PR, the signature of the server_is_term member of the
xrdp module interface is changed to match the signature expected by the
is_term member of a struct trans. This allows for trans_connect()
in xrdp modules to directly access g_is_term() within the main xrdp
executable. At the moment this functionality is only used by the xup
module.
- Based on https://github.com/jsorg71/xrdp/tree/dynamic_monitor
- Tested with xorgxrdp
- Tested with vnc
- Only works with single monitor.
- Update documentation to clarify the difference between MSTSC and
Microsoft Remote Desktop.
- Does not include compatibility with /gfx at this time, which is still
in testing.
- Updates to include ms-rdpedisp.h header for the 2.2.2 specification of
the protocol.
- Adds new dynamic_monitor_layout struct that shares the number of
monitors with xrdp_client_info.h
- Does not allow for BPP changes because the RDP protocol doesn't
support it.
- Option to disable feature as NeutrinoRDP doesn't support it (It was
based on FreeRDP 1.0.1 which didn't yet have this feature.)
- Add CLIENT_MONITOR_DATA_MAXIMUM_MONITORS constant and reference
spec definition.
Depends on https://github.com/neutrinolabs/xorgxrdp/pull/183
The MS specs determine that the character buffer lenngths
for usernames, domains, passwords, alternate shells, etc
can be up to 512 characters including the mandatory null
terminator.
Versioning is for libraries. Modules are not libraries; no code is linked
against them.
Libtool makes sure the modules can be opened by dlopen(). That is already
true for ELF format, but other file formats may need special processing.
This fixes loading modules compiled with a C++ compiler. Remote thandle
type, it's unused. Use tintptr for module data. Don't cast pointers to
long, they won't fit on Win64.
