It is composed by a number of sections, each one composed by a section name, enclosed by square brackets, followed by a list of \fI<parameter>\fR=\fI<value>\fR lines.
All data sent between the client and the server is protected by encryption based on the maximum key strength supported by the client.
.TP
.Bhigh
All data sent between the client and server is protected by encryption based on the server's maximum key strength.
.RE
.TP
\fBfork\fP=\fI[0|1]\fP
If set to \fB1\fR, \fBtrue\fR or \fByes\fR for each incoming connection \fBxrdp\fR(8) forks a sub-process instead of using threads.
.TP
\fBhidelogwindow\fP=\fI[0|1]\fP
If set to \fB1\fP, \fBtrue\fP or \fByes\fP, \fBxrdp\fP will not show a window for log messages.
.TP
\fBmax_bpp\fP=\fI[8|15|16|24]\fP
Limit the color depth by specifying the maximum number of bits per pixel.
.TP
\fBport\fP=\fIport\fP
Specify TCP port to listen on for incoming connections.
The default for RDP is \fB3389\fP.
.TP
\fBtcp_keepalive\fP=\fI[yes|no]\fP
Regulate if the listening socket uses socket option \fBSO_KEEPALIVE\fP.
If set to \fB1\fP, \fBtrue\fP or \fByes\fP and the network connection disappears without closing messages, the connection will be closed.
.TP
\fBtcp_nodelay\fP=\fI[yes|no]\fP
Regulate if the listening socket uses socket option \fBTCP_NODELAY\fP.
If set to \fB1\fP, \fBtrue\fP or \fByes\fP, no buffering will be performed in the TCP stack.
.TP
\fBblack\fP=\fI000000\fP
.TP
\fBgrey\fP=\fIc0c0c0\fP
.TP
\fBdark_grey\fP=\fI808080\fP
.TP
\fBblue\fP=\fI0000ff\fP
.TP
\fBdark_blue\fP=\fI00007f\fP
.TP
\fBwhite\fP=\fIffffff\fP
.TP
\fBred\fP=\fIff0000\fP
.TP
\fBgreen\fP=\fI00ff00\fP
.TP
\fBbackground\fP=\fI000000\fP
These options override the colors used internally by \fBxrdp\fP(8) to draw the login and log windows.
Colors are defined using a hexadecimal (hex) notation for the combination of Red, Green, and Blue color values (RGB).
The lowest value that can be given to one of the light sources is 0 (hex 00).
The highest value is 255 (hex FF).
.SH"LOGGING"
The following parameters can be used in the \fB[logging]\fR section:
.TP
\fBLogFile\fR=\fI${SESMAN_LOG_DIR}/sesman.log\fR
This options contains the path to logfile. It can be either absolute or relative, and the default is \fI${SESMAN_LOG_DIR}/sesman.log\fR
.TP
\fBLogLevel\fR=\fIlevel\fR
This option can have one of the following values:
\fBCORE\fR or \fB0\fR\- Log only core messages. these messages are _always_ logged, regardless the logging level selected.
\fBERROR\fR or \fB1\fR\- Log only error messages
\fBWARNING\fR, \fBWARN\fR or \fB2\fR\- Logs warnings and error messages
\fBINFO\fR or \fB3\fR\- Logs errors, warnings and informational messages
\fBDEBUG\fR or \fB4\fR\- Log everything. If \fBsesman\fR is compiled in debug mode, this options will output many more low\-level message, useful for developers
.TP
\fBEnableSyslog\fR=\fI[0|1]\fR
If set to \fB1\fR, \fBtrue\fR or \fByes\fR this option enables logging to syslog. Otherwise syslog is disabled.
.TP
\fBSyslogLevel\fR=\fIlevel\fR
This option sets the logging level for syslog. It can have the same values of \fBLogLevel\fR. If \fBSyslogLevel\fR is greater than \fBLogLevel\fR, its value is lowered to that of \fBLogLevel\fR.
.SH"CHANNELS"
The Remote Desktop Protocol supports several channels, which are used to transfer additional data like sound, clipboard data and others.
Channel names not listed here will be blocked by \fBxrdp\fP.
Not all channels are supported in all cases, so setting a value to \fItrue\fP is a pre-requisite, but does not force it's use.
.br
Channels can also be enabled or disabled on a per connection basis by prefixing each setting with \fBchannel.\fP in the channel section.
.TP
\fBrdpdr\fP=\fI[0|1]\fP
If set to \fB1\fR, \fBtrue\fR or \fByes\fR using the RDP channel for device re-direction is allowed.
.TP
\fBrdpsnd\fP=\fI[0|1]\fP
If set to \fB1\fR, \fBtrue\fR or \fByes\fR using the RDP channel for sound is allowed.
.TP
\fBdrdynvc\fP=\fI[0|1]\fP
If set to \fB1\fR, \fBtrue\fR or \fByes\fR using the RDP channel to initiate additional dynamic virtual channels is allowed.
.TP
\fBcliprdr\fP=\fI[0|1]\fP
If set to \fB1\fR, \fBtrue\fR or \fByes\fR using the RDP channel for clipboard re-direction is allowed.
.TP
\fBrail\fP=\fI[0|1]\fP
If set to \fB1\fR, \fBtrue\fR or \fByes\fR using the RDP channel for remote applications integrated locally (RAIL) is allowed.
.TP
\fBxrdpvr\fP=\fI[0|1]\fP
If set to \fB1\fR, \fBtrue\fR or \fByes\fR using the RDP channel for XRDP Video streaming is allowed.
