Copyright 2019 Sebastian Wick Copyright 2019 Erwin Burema Copyright 2020 AMD Copyright 2020, 2022, 2023 Collabora, Ltd. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice (including the next paragraph) shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. The aim of the color management extension is to allow clients to know the color properties of outputs, and to tell the compositor about the color properties of their content on surfaces. Doing this enables a compositor to perform automatic color management of content for different outputs according to how content is intended to look like. The color properties are represented as an image description object which is immutable after it has been created. A wl_output always has an associated image description that clients can observe. A wl_surface always has an associated preferred image description as a hint chosen by the compositor that clients can also observe. Clients can set an image description on a wl_surface to denote the color characteristics of the surface contents. An image description includes SDR and HDR colorimetry and encoding, HDR metadata, and viewing environment parameters. An image description does not include the properties set through color-representation extension. It is expected that the color-representation extension is used in conjunction with the color management extension when necessary, particularly with the YUV family of pixel formats. Recommendation ITU-T H.273 "Coding-independent code points for video signal type identification" shall be referred to as simply H.273 here. The color-and-hdr repository (https://gitlab.freedesktop.org/pq/color-and-hdr) contains background information on the protocol design and legacy color management. It also contains a glossary, learning resources for digital color, tools, samples and more. The terminology used in this protocol is based on common color science and color encoding terminology where possible. The glossary in the color-and-hdr repository shall be the authority on the definition of terms in this protocol. A global interface used for getting color management extensions for wl_surface and wl_output objects, and for creating client defined image description objects. The extension interfaces allow getting the image description of outputs and setting the image description of surfaces. Destroy the xx_color_manager_v2 object. This does not affect any other objects in any way. See the ICC.1:2022 specification from the International Color Consortium for more details about rendering intents. The principles of ICC defined rendering intents apply with all types of image descriptions, not only those with ICC file profiles. Compositors must support the perceptual rendering intent. Other rendering intents are optional. The compositor supports set_mastering_display_primaries request with a target color volume fully contained inside the primary color volume. The compositor additionally supports target color volumes that extend outside of the primary color volume. This can only be advertised if feature set_mastering_display_primaries is supported as well. Named color primaries used to encode well-known sets of primaries. H.273 is the authority, when it comes to the exact values of primaries and authoritative specifications, where an equivalent code point exists. Descriptions do list the specifications for convenience. Color primaries as defined by - Rec. ITU-R BT.709-6 - Rec. ITU-R BT.1361-0 conventional colour gamut system and extended colour gamut system (historical) - IEC 61966-2-1 sRGB or sYCC - IEC 61966-2-4 - Society of Motion Picture and Television Engineers (SMPTE) RP 177 (1993) Annex B Equivalent to H.273 ColourPrimaries code point 1. Color primaries as defined by - Rec. ITU-R BT.470-6 System M (historical) - United States National Television System Committee 1953 Recommendation for transmission standards for color television - United States Federal Communications Commission (2003) Title 47 Code of Federal Regulations 73.682 (a)(20) Equivalent to H.273 ColourPrimaries code point 4. Color primaries as defined by - Rec. ITU-R BT.470-6 System B, G (historical) - Rec. ITU-R BT.601-7 625 - Rec. ITU-R BT.1358-0 625 (historical) - Rec. ITU-R BT.1700-0 625 PAL and 625 SECAM Equivalent to H.273 ColourPrimaries code point 5. Color primaries as defined by - Rec. ITU-R BT.601-7 525 - Rec. ITU-R BT.1358-1 525 or 625 (historical) - Rec. ITU-R BT.1700-0 NTSC - SMPTE 170M (2004) - SMPTE 240M (1999) (historical) Equivalent to H.273 ColourPrimaries code point 6 and 7. Color primaries as defined by H.273 for generic film. Equivalent to H.273 ColourPrimaries code point 8. Color primaries as defined by - Rec. ITU-R BT.2020-2 - Rec. ITU-R BT.2100-0 Equivalent to H.273 ColourPrimaries code point 9. Color primaries as defined as the maximum of the CIE 1931 XYZ color space by - SMPTE ST 428-1 - (CIE 1931 XYZ as in ISO 11664-1) Equivalent to H.273 ColourPrimaries code point 10. Color primaries as defined by Digital Cinema System and published in SMPTE RP 431-2 (2011). Equivalent to H.273 ColourPrimaries code point 11. Color primaries as defined by Digital Cinema System and published in SMPTE EG 432-1 (2010). Equivalent to H.273 ColourPrimaries code point 12. Color primaries as defined by Adobe as "Adobe RGB" and later published by ISO 12640-4 (2011). Named Transfer Functions. Transfer characteristics as defined by - Rec. ITU-R BT.709-6 - Rec. ITU-R BT.1361-0 conventional colour gamut system (historical) Equivalent to H.273 TransferCharacteristics code point 1, 6, 14, 15. Transfer characteristics as defined by - Rec. ITU-R BT.470-6 System M (historical) - United States National Television System Committee 1953 Recommendation for transmission standards for color television - United States Federal Communications Commission (2003) Title 47 Code of Federal Regulations 73.682 (a) (20) - Rec. ITU-R BT.1700-0 625 PAL and 625 SECAM Equivalent to H.273 TransferCharacteristics code point 4. Transfer characteristics as defined by - Rec. ITU-R BT.470-6 System B, G (historical) Equivalent to H.273 TransferCharacteristics code point 5. Transfer characteristics as defined by - SMPTE ST 240 (1999) Equivalent to H.273 TransferCharacteristics code point 7. Linear transfer characteristics. Equivalent to H.273 TransferCharacteristics code point 8. Logarithmic transfer characteristic (100:1 range). Equivalent to H.273 TransferCharacteristics code point 9. Logarithmic transfer characteristic (100 * Sqrt(10) : 1 range). Equivalent to H.273 TransferCharacteristics code point 10. Transfer characteristics as defined by - IEC 61966-2-4 Equivalent to H.273 TransferCharacteristics code point 11. Transfer characteristics as defined by - Rec. ITU-R BT.1361-0 extended colour gamut system (historical) Equivalent to H.273 TransferCharacteristics code point 12. Transfer characteristics as defined by - IEC 61966-2-1 sRGB Equivalent to H.273 TransferCharacteristics code point 13 with MatrixCoefficients set to 0. Transfer characteristics as defined by - IEC 61966-2-1 sYCC Equivalent to H.273 TransferCharacteristics code point 13 with MatrixCoefficients set to anything but 0. Transfer characteristics as defined by - SMPTE ST 2084 (2014) for 10-, 12-, 14- and 16-bit systems - Rec. ITU-R BT.2100-2 perceptual quantization (PQ) system Equivalent to H.273 TransferCharacteristics code point 16. Transfer characteristics as defined by - SMPTE ST 428-1 (2019) Equivalent to H.273 TransferCharacteristics code point 17. Transfer characteristics as defined by - ARIB STD-B67 (2015) - Rec. ITU-R BT.2100-2 hybrid log-gamma (HLG) system Equivalent to H.273 TransferCharacteristics code point 18. This creates a new xx_color_management_output_v2 object for the given wl_output. See the xx_color_management_output_v2 interface for more details. This creates a new color xx_color_management_surface_v2 object for the given wl_surface. See the xx_color_management_surface_v2 interface for more details. Makes a new ICC-based image description creator object with all properties initially unset. The client can then use the object's interface to define all the required properties for an image description and finally create a xx_image_description_v2 object. This request can be used when the compositor advertises xx_color_manager_v2.feature.icc_v2_v4. Otherwise this request raises the protocol error unsupported_feature. Makes a new parametric image description creator object with all properties initially unset. The client can then use the object's interface to define all the required properties for an image description and finally create a xx_image_description_v2 object. This request can be used when the compositor advertises xx_color_manager_v2.feature.parametric. Otherwise this request raises the protocol error unsupported_feature. When this object is created, it shall immediately send this event once for each rendering intent the compositor supports. When this object is created, it shall immediately send this event once for each compositor supported feature listed in the enumeration. When this object is created, it shall immediately send this event once for each named transfer function the compositor supports with the parametric image description creator. When this object is created, it shall immediately send this event once for each named set of primaries the compositor supports with the parametric image description creator. A xx_color_management_output_v2 describes the color properties of an output. The xx_color_management_output_v2 is associated with the wl_output global underlying the wl_output object. Therefore the client destroying the wl_output object has no impact, but the compositor removing the output global makes the xx_color_management_output_v2 object inert. Destroy the color xx_color_management_output_v2 object. This does not affect any remaining protocol objects. This event is sent whenever the image description of the output changed, followed by one wl_output.done event common to output events across all extensions. If the client wants to use the updated image description, it needs to do get_image_description again, because image description objects are immutable. This creates a new xx_image_description_v2 object for the current image description of the output. There always is exactly one image description active for an output so the client should destroy the image description created by earlier invocations of this request. This request is usually sent as a reaction to the image_description_changed event or when creating a xx_color_management_output_v2 object. The created xx_image_description_v2 object preserves the image description of the output from the time the object was created. The resulting image description object allows get_information request. If this protocol object is inert, the resulting image description object shall immediately deliver the xx_image_description_v2.failed event with the no_output cause. If the interface version is inadequate for the output's image description, meaning that the client does not support all the events needed to deliver the crucial information, the resulting image description object shall immediately deliver the xx_image_description_v2.failed event with the low_version cause. Otherwise the object shall immediately deliver the ready event. A xx_color_management_surface_v2 allows the client to set the color space and HDR properties of a surface. If the wl_surface associated with the xx_color_management_surface_v2 is destroyed, the xx_color_management_surface_v2 object becomes inert. Destroy the xx_color_management_surface_v2 object. When the last xx_color_management_surface_v2 object for a wl_surface is destroyed, it does the same as unset_image_description. Set the image description of the underlying surface. The image description and rendering intent are double-buffered state, see wl_surface.commit. It is the client's responsibility to understand the image description it sets on a surface, and to provide content that matches that image description. A rendering intent provides the client's preference on how content colors should be mapped to each output. The render_intent value must be one advertised by the compositor with xx_color_manager_v2.render_intent event, otherwise the protocol error render_intent is raised. By default, a surface does not have an associated image description nor a rendering intent. The handling of color on such surfaces is compositor implementation defined. Compositors should handle such surfaces as sRGB but may handle them differently if they have specific requirements. This request removes any image description from the surface. See set_image_description for how a compositor handles a surface without an image description. This is double-buffered state, see wl_surface.commit. The preferred image description is the one which likely has the most performance and/or quality benefits for the compositor if used by the client for its wl_surface contents. This event is sent whenever the compositor changes the wl_surface's preferred image description. This is not an initial event. This event is merely a notification. When the client wants to know what the preferred image description is, it shall use the get_preferred request. The preferred image description is not automatically used for anything. It is only a hint, and clients may set any valid image description with set_image_description but there might be performance and color accuracy improvements by providing the wl_surface contents in the preferred image description. Therefore clients that can, should render according to the preferred image description If this protocol object is inert, the protocol error inert is raised. This creates a new xx_image_description_v2 object for the currently preferred image description for the wl_surface. The client should stop using and destroy the image descriptions created by earlier invocations of this request for the associated wl_surface. This request is usually sent as a reaction to the preferred_changed event or when creating a xx_color_management_surface_v2 object if the client is capable of adapting to image descriptions. The created xx_image_description_v2 object preserves the preferred image description of the wl_surface from the time the object was created. The resulting image description object allows get_information request. If the interface version is inadequate for the preferred image description, meaning that the client does not support all the events needed to deliver the crucial information, the resulting image description object shall immediately deliver the xx_image_description_v2.failed event with the low_version cause, otherwise the object shall immediately deliver the ready event. This type of object is used for collecting all the information required to create a xx_image_description_v2 object from an ICC file. A complete set of required parameters consists of these properties: - ICC file Each required property must be set exactly once if the client is to create an image description. The set requests verify that a property was not already set. The create request verifies that all required properties are set. There may be several alternative requests for setting each property, and in that case the client must choose one of them. Once all properties have been set, the create request must be used to create the image description object, destroying the creator in the process. Create an image description object based on the ICC information previously set on this object. A compositor must parse the ICC data in some undefined but finite amount of time. The completeness of the parameter set is verified. If the set is not complete, the protocol error incomplete_set is raised. For the definition of a complete set, see the description of this interface. If the particular combination of the information is not supported by the compositor, the resulting image description object shall immediately deliver the xx_image_description_v2.failed event with the 'unsupported' cause. If a valid image description was created from the information, the xx_image_description_v2.ready event will eventually be sent instead. This request destroys the xx_image_description_creator_icc_v2 object. The resulting image description object does not allow get_information request. Sets the ICC profile file to be used as the basis of the image description. The data shall be found through the given fd at the given offset, having the given length. The fd must seekable and readable. Violating these requirements raises the bad_fd protocol error. If reading the data fails due to an error independent of the client, the compositor shall send the xx_image_description_v2.failed event on the created xx_image_description_v2 with the 'operating_system' cause. The maximum size of the ICC profile is 4 MB. If length is greater than that or zero, the protocol error bad_size is raised. If offset + length exceeds the file size, the protocol error out_of_file is raised. A compositor may read the file at any time starting from this request and only until whichever happens first: - If create request was issued, the xx_image_description_v2 object delivers either failed or ready event; or - if create request was not issued, this xx_image_description_creator_icc_v2 object is destroyed. A compositor shall not modify the contents of the file, and the fd may be sealed for writes and size changes. The client must ensure to its best ability that the data does not change while the compositor is reading it. The data must represent a valid ICC profile. The ICC profile version must be 2 or 4, it must be a 3 channel profile and the class must be 'display'. Violating these requirements will not result in a protocol error but will eventually send the xx_image_description_v2.failed event on the created xx_image_description_v2 with the 'unsupported' cause. See the International Color Consortium specification ICC.1:2022 for more details about ICC profiles. If ICC file has already been set on this object, the protocol error already_set is raised. This type of object is used for collecting all the parameters required to create a xx_image_description_v2 object. A complete set of required parameters consists of these properties: - transfer characteristic function (tf) - chromaticities of primaries and white point (primary color volume) The following properties are optional and have a well-defined default if not explicitly set: - mastering display primaries and white point (target color volume) - mastering luminance range - maximum content light level - maximum frame-average light level Each required property must be set exactly once if the client is to create an image description. The set requests verify that a property was not already set. The create request verifies that all required properties are set. There may be several alternative requests for setting each property, and in that case the client must choose one of them. Once all properties have been set, the create request must be used to create the image description object, destroying the creator in the process. Create an image description object based on the parameters previously set on this object. The completeness of the parameter set is verified. If the set is not complete, the protocol error incomplete_set is raised. For the definition of a complete set, see the description of this interface. If the particular combination of the parameter set is not supported by the compositor, the resulting image description object shall immediately deliver the xx_image_description_v2.failed event with the 'unsupported' cause. If a valid image description was created from the parameter set, the xx_image_description_v2.ready event will eventually be sent instead. This request destroys the xx_image_description_creator_params_v2 object. The resulting image description object does not allow get_information request. Sets the transfer characteristic using explicitly enumerated named functions. Only names advertised with xx_color_manager_v2 event supported_tf_named are allowed. Other values shall raise the protocol error invalid_tf. If transfer characteristic has already been set on this object, the protocol error already_set is raised. Sets the color component transfer characteristic to a power curve with the given exponent. This curve represents the conversion from electrical to optical pixel or color values. The curve exponent shall be multiplied by 10000 to get the argument eexp value to carry the precision of 4 decimals. The curve exponent must be at least 1.0 and at most 10.0. Otherwise the protocol error invalid_tf is raised. If transfer characteristic has already been set on this object, the protocol error already_set is raised. This request can be used when the compositor advertises xx_color_manager_v2.feature.set_tf_power. Otherwise this request raises the protocol error invalid_tf. Sets the color primaries and white point using explicitly named sets. This describes the primary color volume which is the basis for color value encoding. Only names advertised with xx_color_manager_v2 event supported_primaries_named are allowed. Other values shall raise the protocol error invalid_primaries. If primaries have already been set on this object, the protocol error already_set is raised. Sets the color primaries and white point using CIE 1931 xy chromaticity coordinates. This describes the primary color volume which is the basis for color value encoding. Each coordinate value is multiplied by 10000 to get the argument value to carry precision of 4 decimals. If primaries have already been set on this object, the protocol error already_set is raised. This request can be used if the compositor advertises xx_color_manager_v2.feature.set_primaries. Otherwise this request raises the protocol error invalid_primaries. Provides the color primaries and white point of the mastering display using CIE 1931 xy chromaticity coordinates. This is compatible with the SMPTE ST 2086 definition of HDR static metadata. The mastering display primaries define the target color volume. If mastering display primaries are not explicitly set, the target color volume is assumed to be equal to the primary color volume. The target color volume is defined by all tristimulus values between 0.0 and 1.0 (inclusive) of the color space defined by the given mastering display primaries and white point. The colorimetry is identical between the container color space and the mastering display color space, including that no chromatic adaptation is applied even if the white points differ. The target color volume can exceed the primary color volume to allow for a greater color volume with an existing color space definition (for example scRGB). It can be smaller than the primary color volume to minimize gamut and tone mapping distances for big color spaces (HDR metadata). To make use of the entire target color volume a suitable pixel format has to be chosen (e.g. floating point to exceed the primary color volume, or abusing limited quantization range as with xvYCC). Each coordinate value is multiplied by 10000 to get the argument value to carry precision of 4 decimals. If mastering display primaries have already been set on this object, the protocol error already_set is raised. This request can be used if the compositor advertises xx_color_manager_v2.feature.set_mastering_display_primaries. Otherwise this request raises the protocol error invalid_mastering. The advertisement implies support only for target color volumes fully contained within the primary color volume. If a compositor additionally supports target color volume exceeding the primary color volume, it must advertise xx_color_manager_v2.feature.extended_target_volume. If a client uses target color volume exceeding the primary color volume and the compositor does not support it, the result is implementation defined. Compositors are recommended to detect this case and fail the image description gracefully, but it may as well result in color artifacts. Sets the luminance range that was used during the content mastering process as the minimum and maximum absolute luminance L. This is compatible with the SMPTE ST 2086 definition of HDR static metadata. This can only be set when set_tf_cicp is used to set the transfer characteristic to Rec. ITU-R BT.2100-2 perceptual quantization system. Otherwise, 'create' request shall raise inconsistent_set protocol error. The mastering luminance range is undefined by default. If max L is less than or equal to min L, the protocol error invalid_luminance is raised. Min L value is multiplied by 10000 to get the argument min_lum value and carry precision of 4 decimals. Max L value is unscaled for max_lum. Sets the maximum content light level (max_cll) as defined by CTA-861-H. This can only be set when set_tf_cicp is used to set the transfer characteristic to Rec. ITU-R BT.2100-2 perceptual quantization system. Otherwise, 'create' request shall raise inconsistent_set protocol error. max_cll is undefined by default. Sets the maximum frame-average light level (max_fall) as defined by CTA-861-H. This can only be set when set_tf_cicp is used to set the transfer characteristic to Rec. ITU-R BT.2100-2 perceptual quantization system. Otherwise, 'create' request shall raise inconsistent_set protocol error. max_fall is undefined by default. An image description carries information about the color encoding used on a surface when attached to a wl_surface via xx_color_management_surface_v2.set_image_description. A compositor can use this information to decode pixel values into colorimetrically meaningful quantities. Note, that the xx_image_description_v2 object is not ready to be used immediately after creation. The object eventually delivers either the 'ready' or the 'failed' event, specified in all requests creating it. The object is deemed "ready" after receiving the 'ready' event. An object which is not ready is illegal to use, it can only be destroyed. Any other request in this interface shall result in the 'not_ready' protocol error. Attempts to use an object which is not ready through other interfaces shall raise protocol errors defined there. Once created and regardless of how it was created, a xx_image_description_v2 object always refers to one fixed image description. It cannot change after creation. Destroy this object. It is safe to destroy an object which is not ready. Destroying a xx_image_description_v2 object has no side-effects, not even if a xx_color_management_surface_v2.set_image_description has not yet been followed by a wl_surface.commit. If creating a xx_image_description_v2 object fails for a reason that is not defined as a protocol error, this event is sent. The requests that create image description objects define whether and when this can occur. Only such creation requests can trigger this event. This event cannot be triggered after the image description was successfully formed. Once this event has been sent, the xx_image_description_v2 object will never become ready and it can only be destroyed. Once this event has been sent, the xx_image_description_v2 object is deemed "ready". Ready objects can be used to send requests and can be used through other interfaces. Every ready xx_image_description_v2 protocol object refers to an underlying image description record in the compositor. Multiple protocol objects may end up referring to the same record. Clients may identify these "copies" by comparing their id numbers: if the numbers from two protocol objects are identical, the protocol objects refer to the same image description record. Two different image description records cannot have the same id number simultaneously. The id number does not change during the lifetime of the image description record. The id number is valid only as long as the protocol object is alive. If all protocol objects referring to the same image description record are destroyed, the id number may be recycled for a different image description record. Image description id number is not a protocol object id. Zero is reserved as an invalid id number. It shall not be possible for a client to refer to an image description by its id number in protocol. The id numbers might not be portable between Wayland connections. This identity allows clients to de-duplicate image description records and avoid get_information request if they already have the image description information. Creates a xx_image_description_info_v2 object which delivers the information that makes up the image description. Not all image description protocol objects allow get_information request. Whether it is allowed or not is defined by the request that created the object. If get_information is not allowed, the protocol error no_information is raised. Sends all matching events describing an image description object exactly once and finally sends the 'done' event. Once a xx_image_description_info_v2 object has delivered a 'done' event it is automatically destroyed. Every xx_image_description_info_v2 created from the same xx_image_description_v2 shall always return the exact same data. Signals the end of information events and destroys the object. The icc argument provides a file descriptor to the client which may be memory-mapped to provide the ICC profile matching the image description. The fd is read-only, and if mapped then it must be mapped with MAP_PRIVATE by the client. The ICC profile version and other details are determined by the compositor. There is no provision for a client to ask for a specific kind of a profile. Delivers the primary color volume primaries and white point using CIE 1931 xy chromaticity coordinates. Each coordinate value is multiplied by 10000 to get the argument value to carry precision of 4 decimals. Delivers the primary color volume primaries and white point using a explicitly enumerated named set. The color component transfer characteristic of this image description is a pure power curve. This event provides the exponent of the power function. This curve represents the conversion from electrical to optical pixel or color values. The curve exponent has been multiplied by 10000 to get the argument eexp value to carry the precision of 4 decimals. Delivers the transfer characteristic using an explicitly enumerated named function. Provides the color primaries and white point of the target color volume using CIE 1931 xy chromaticity coordinates. This is compatible with the SMPTE ST 2086 definition of HDR static metadata for mastering displays. While primary color volume is about how color is encoded, the target color volume is the actually displayable color volume. If target color volume is equal to the primary color volume, then this event is not sent. Each coordinate value is multiplied by 10000 to get the argument value to carry precision of 4 decimals. Provides the luminance range that the image description is targeting as the minimum and maximum absolute luminance L. This is compatible with the SMPTE ST 2086 definition of HDR static metadata. This luminance range is only theoretical and may not correspond to the luminance of light emitted on an actual display. Min L value is multiplied by 10000 to get the argument min_lum value and carry precision of 4 decimals. Max L value is unscaled for max_lum. Provides the targeted max_cll of the image description. max_cll is defined by CTA-861-H. This luminance is only theoretical and may not correspond to the luminance of light emitted on an actual display. Provides the targeted max_fall of the image description. max_fall is defined by CTA-861-H. This luminance is only theoretical and may not correspond to the luminance of light emitted on an actual display.