Whether a input method is used should be the responsibility
of the shell because some shells may not want to implement
an input method at all
Signed-off-by: Murray Calavera <murray.calavera@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Do not use a black blanket surface when the startup animation is
specified to be "none". This is the final fix needed to make the
screenshot test deterministic and independent of weston-desktop-shell.
Previously, the black surface would cover all outputs until
weston-desktop-shell signalled ready. Then, depending on the set
animation, either the black surface was immediately removed (none) or a
fade-in started (fade).
Now, when there is no black surface at all for "none", the compositor
will show garbage until weston-desktop-shell gets everything up. This
may be undesireable but works for tests. To have the old "none"
behaviour back, I would propose to add a new startup-animation value
"black" for it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
It's possible for more than one animation to be taking place on a view at
the same time. If one of those animations is the shell's fade out for
dying surfaces, its completion handler will trigger the surface destroy
signal, causing other animations on the animation list to remove themselves.
Since this removal occurs during the linked list walk, the compositor may
crash.
We move the actual surface destruction into an idle handler to avoid this.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If the compositor has never seen a mouse, exposay will crash because
the seat->pointer pointer is NULL.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Weston has sent the first 'resizing' configure event with width=height=0.
But resizing to that size doesn't make sense.
Instead, we now send the current width and height of the surface at the beginning
of resizing.
Signed-off-by: Ryo Munakata <ryomnktml@gmail.com>
They are errors that may be as a result of calling get_xdg_popup on an
xdg_shell, not a result of calling a request on xdg_popup.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Require all child objects to be destroyed before the parent. In other
words, all popups and surfaces created by one xdg_shell instance needs
to be destroyed before the xdg_shell object, otherwise a protocol error
is raised.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The other set_focus() functions take the relevant type instead of a seat
already, so this is consistent.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Currently, the shell crashes if the parent is not a shell surface. Instead,
send an error to the client.
Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
All the surfaces from all the X clients share the same wl_client so
wl_client_get_credentials can't be used to get the pid of the X
clients.
The shell may need to know the pid to be able to associate a surface
with e.g. a DBus service.
[Pekka: fixed trivial merge conflicts.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The "set_minimized(surface, 0)" function call was never
used anywhere, and not really respecting naming
conventions.
Signed-off-by: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Now clamping width and height to a minimum of 1, 1 when drag resizing.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
The code for the key binding that triggers debug key bindings, that is,
the code that makes mod+SHIFT+SPACE work, used to live in shell.c. I
want to make the debug key bindings available in ivi-shell too, so this
code should be shared. Move it to core.
The code was originally introduced in
commit c509d2b152
so update the copyright in binding.c to reflect that.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Send an invalid_parent error when the client tries to create a popup
with a paren that is neither a xdg_surface nor a xdg_popup.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Either in destroy or get_xdg_popup.
[jadahl: Verify that the new popup is the top most when mapping instead
of creating. Some renaming.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
There haven't been any ideas for flags, so we don't need a useless,
unused parameter hanging around. Any future ideas should be done with a
new request entirely.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It doesn't serve any purpose, as it's a serial that the client gave to
the server when starting the popup, which the client already has.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Can just use wl_list_for_each_safe instead of dealing with pointers
ourself.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If a client calls xdg_shell.get_xdg_surface on a surface that is already
an xdg_surface would, prior to this patch, succeed, but cause weston to
crash later when trying to configure. This patch instead sends a role
error to the client complaining that it already is an xdg_surface.
Note that .._set_role() only fails when changing roles, not when setting
the same role twice.
The same is done for xdg_popup.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
This patch adds the maximize button to the window frame for the windows
which set the MWM_DECOR_MAXIMIZE hint, and it wires it with the shell
via a new method in weston_shell_interface.
Additionally, it also listens for the wm hints coming from the client,
but it doesn't support maximizing a window only vertically or horizontally.
The window will be maximized only when both directions are maximized.
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Remove a few instances of casting weston_seat to weston_seat.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jon A. Cruz <jonc@osg.samsung.com>
The zoom effect zooms at the seat's current pointer location. When no
pointer is present the zoom key bindings cause a crash.
Instead, check for the absence of a pointer and log a warning.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Logging is activated and deactivated with the debug key binding 't'.
When activated, it creates a new log file, where it records the events.
The log file contains events and detailed object information entries in
JSON format, and is meant to be parsed in sequence from beginning to the
end.
The emitted events are mostly related to the output repaint cycle, like
when repaint begins, is submitted to GPU, and when it completes on a
vblank. This is recorded per-output. Also some per-surface events are
recorded, including when surface damage is flushed.
To reduce the log size, events refer to objects like outputs and
surfaces by id numbers. Detailed object information is emitted only as
needed: on the first object occurrence, and afterwards only if
weston_timeline_object::force_refresh asks for it.
The detailed information for surfaces includes the string returned by
weston_surface::get_label. Therefore it is important to set
weston_timeline_object::force_refresh = 1 whenever the string would
change, so that the new details get recorded.
A rudimentary parser and SVG generator can be found at:
https://github.com/ppaalanen/wesgr
The timeline logs can answer questions including:
- How does the compositor repaint cycle work timing-wise?
- When was the vblank deadline missed?
- What is the latency from surface commit to showing the new content on
screen?
- How long does it take to process the scenegraph?
v2: weston_surface::get_description renamed to get_label.
v3: reafctor a bit into fprint_quoted_string().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When printing out logs from Weston's actions, mainly for debugging, it
can be very difficult to identify the different surfaces. Inspecting
the configure function pointer is not useful, as the configure functions
may live in modules.
Add vfunc get_label to weston_surface, which will produce a short,
human-readable description of the surface, which allows identifying it
better, rather than just looking at the surface size, for instance.
Set the label function from most parts of Weston, to identify cursors and
drag icons, and panels, backgrounds, screensavers and lock surfaces, and
the desktop shell's application surfaces.
v2: renamed 'description' to 'label', so we get
weston_surface_set_label_func().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If a keyboard exists but it has no current focus, yet something asks the
input-panel to come up, we would crash here. Check that there is a focus
before attempting to use it.
Maybe there should not even exist a case where input-panel tries to come
up without a keyboard focus, but I am not sure there is no race where it
could happen.
In any case, this fix was brought up by the ivi-shell work, where I
suppose you can somehow hit it.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Cc: Tanibata, Nobuhiko <ntanibata@jp.adit-jv.com>
set_fullscreen has been sending configure before changing the state
and xwayland windows added border to the fullscreen size.
This fixes the bug:
https://bugs.freedesktop.org/show_bug.cgi?id=83502
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Ryo Munakata <ryomnktml@gmail.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This breaks weston_output_mode_switch() into 3 functions:
weston_output_mode_set_native()
weston_output_mode_switch_to_temporary()
weston_output_mode_switch_to_native()
Differences from previous behaviour:
SET_NATIVE didn't set current_scale (now it does)
SET_TEMPORARY could set mode and scale independently - now it can't.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Pekka Paalanen <pekka.paalanen@collabora.co.uk>
With the more accurate definition of wl_surface roles in Wayland,
enforce the restriction: a role is always set permanently, and
attempting to change it is a protocol error.
This patch is based on Jasper's patch:
http://lists.freedesktop.org/archives/wayland-devel/2014-August/016811.html
The difference in this patch compared to his are:
- send role errors on the interface whose request triggers it, not on
wl_surface
- an interface could have several requests assigning different roles,
cannot use wl_interface as the unique key; use an arbitary string
instead
- ensure in window-manager.c that create_shell_surface() ->
create_common_surface() is never called with surface->configure set,
to avoid compositor abort
- use wl_resource_post_no_memory() where appropriate instead of
hand-rolling it with wl_resource_post_error()
Ideally we would not add weston_surface::role_name field, but use
weston_surface::configure. At the moment this is not possible though,
because at least shell.c uses several different roles with the same
configure function. Drag'n'drop uses two configure functions for the
same role. The configure hook is also reset in several places,
which is not good for role tracking.
This patch overlooks the wl_surface roles assigned in privileged
extensions: screensaver, panel, background, lock, input panel.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Noticed while reading code, that create_common_surface() may return
NULL, and callers of its direct callers check for NULL, but the
intermediate function in between would crash.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Calling weston_output_mode_switch() with WESTON_MODE_SWITCH_RESTORE_NATIVE
will result in the mode being set "back" to the passed in mode - so the
passed mode should be the native mode.
Additionally, weston_output_mode_switch() should be called when
output->original_mode is non-NULL (which indicates we had a temporary
mode set). The comparison to current_mode results in a lot of
log chatter.
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
weston_surface_update_transform() no longer exists, except in comments.
Fix that.
[Pekka Paalanen: don't lose the full comment in compositor-drm.c.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Set the right position of maximized window. Up until now we ignored
output's "position" and were using only the working area
of output which is in output-relative coordinates. This led to
showing the maximized window always on the first output.
This, along with the previous patch, fixes
https://bugs.freedesktop.org/show_bug.cgi?id=82967
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
shsurf->output is the output that user expects the shell surface
is on. When maximizing, we don't have any explicit setting of the output
like in the case of fullscreening, so set the output to the one that
the surface is currently on. In the case that the surface is not mapped yet,
(if it ever happens) use the same heuristics as for fullscreening.
This fixes the size sent with configure event, when maximizing a window.
The size is now picked up by the correct output, but the maximized
window position is still wrong. [Pekka Paalanen]
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=82967
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Fix recently introduced compiler warnings:
desktop-shell/shell.c: In function 'shell_configuration':
desktop-shell/shell.c:588:10: warning: ignoring return value of
'asprintf', declared with attribute warn_unused_result [-Wunused-result]
src/screenshooter.c: In function ‘screenshooter_binding’:
src/screenshooter.c:291:10: warning: ignoring return value of
‘asprintf’, declared with attribute warn_unused_result [-Wunused-result]
src/text-backend.c: In function ‘text_backend_configuration’:
src/text-backend.c:944:10: warning: ignoring return value of ‘asprintf’,
declared with attribute warn_unused_result [-Wunused-result]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When client is lauched in fullscreen, it is placed on the
first output, because it is not mapped and
shell_surface_set_output() therefore sets default output.
Since we have no better way how to position newly created windows,
(http://lists.freedesktop.org/archives/wayland-devel/2014-May/thread.html#14568)
set the output to the one that has currently focus. Priority has
the touch focus, then pointer and then keyboard focus.
This fixes bug
https://bugs.freedesktop.org/show_bug.cgi?id=69780
Signed-off-by: Marek Chalupa <mchqwerty@gmail.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If a full screen program is fading out and a touch start happens, it
will result in a NULL pointer dereference when weston_touch_set_focus
tries to derefernce view->surface->resource.
Instead, this patch sets the focus to NULL, which should be the
same as if the program was destroyed during the touch anyway.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=78706
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If weston-desktop-shell dies soon after launch, or maybe cannot be
executed at all, let weston exit rather than letting the user stare at a
black screen.
But, do not exit weston, if weston-desktop-shell dies later, as the user
may already have apps open, and those apps would likely still function
correctly. This gives the user the opportunity to save his work and
close the apps properly.
This should make one class of "I see only black screen" failures obvious.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>
The desktop shell plugin registers both a wl_client destroy signal
listener, and a sigchld handler, when launching weston-desktop-shell.
However, nothing guarantees in which order do the wl_client destructor
and the sigchld handler run.
Luckily, the sigchld handler cannot interrupt any code, because we
handle the signal via signalfd, which means it is handled like any event
in the compositor's main event loop.
Still, shell.c has a race, that when lost, can cause a crash, as
described in bug #82957.
If the sigchld handler happens to run first, it will try to launch a new
weston-desktop-shell without removing the destroy listener from the old
wl_client first. This leads to list corruption, that may cause a crash
when the old wl_client gets destroyed.
Simply removing the destroy listener in the sigchld handler is not
enough, because respawning sets shell->child.client pointer, and if
the wl_client destructor runs after, it will reset it to NULL.
OTOH, the wl_client destroy handler cannot reset shell->child.process,
because that would cause the sigchld handler in weston core to not find
the process tracker anymore, and report that an unknown process exited.
Turns out, that to make everything work, we would need to wait for both
the wl_client destructor and the sigchld handler to have run, before
respawn. This gets tricky.
Instead, solve the problem by removing shell->child.process. Use the new
weston_client_start() which automatically creates and manages the struct
weston_process. The shell does not need to know about the process exit,
it only needs to know about the client disconnect. Weston-desktop-shell
will never attempt to reconnect, and it would not work even if it did,
so disconnect is equivalent to weston-desktop-shell exiting.
This should permanently solve the race for weston-desktop-shell.
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=82957
Cc: Boyan Ding <stu_dby@126.com>
Cc: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
In this case wl_client_add_destroy_listener() was called with a NULL
client, which is invalid.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
desktop shell and weston keyboard both refer to themselves prefixed by
LIBEXECDIR, however this is only valid once installed. make check will
currently either fail or run pre-existing versions.
This patch adds a way to override that location by setting the env var
WESTON_BUILD_DIR - which is then set by the test env script so make check
will test the versions in the build directory regardless of whether they're
installed or not.
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The experimental versioning has not been updated when it was supposed
to. Let's try to be better at it now, as xdg-shell is close to have its
first stable version.
Bump the version now to bring the world into the same exact version.
There may be some protocol changes still coming, but we try to land them
before 1.6 gets out. Those changes will bump the experimental version
again as needed.
When 1.6.0 is released, the experimental version will no longer be
bumped, and no incompatible protocol changes will be made. Xdg-shell.xml
file will move to Wayland in 1.7.0, drop the experimental versioning,
and become stable.
Cc: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Now the client can let us know where the panel is using
desktop_shell.set_panel_position, we can correctly calculate where to
put new views and how big maximized views should be.
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Panels are always assumed to be on the top edge of the output. If this
is not the case views will be placed under the panel, wherever it is,
and maximize doesn't use the correct space allocated for views.
By telling the server on which edge the panel is located, it can
correctly calculate where to put new views and how big maximized views
should be.
[Pekka Paalanen: the user of this protocol so far is Maynard.]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The commit 'input: Send leave and enter pair when the surface moves
under the cursor' introduced focused surface local pointer coordinates
to keep track of if a surface had been moved or transformed in a way
that the pointer posititon relative to that surface would change.
Update these coordinates also for the popup grab as otherwise every
pointer motion during a popup grab results in leave and then enter
events.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
At the moment when surfaces are destroyed they are faded out but let's
make it configurable!
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
An error makes the client exit, which cleans up the resources anyway.
Note (Jason Ekstrand):
This is safe for two reasons. First, we should be handling object
destruction nicely anyway. Second, in each of these cases, the resources
don't have any implementation or destruction set so it has absolutely no
effect on the rest of weston whether we destroy it now or later.
This introduces a new struct, weston_layer_entry, which is now used
in place of wl_list to keep the link for the layer list in weston_view
and the head of the list in weston_layer.
weston_layer_entry also has a weston_layer*, which points to the layer
the view is in or, in the case the entry it's the head of the list, to
the layer itself.
Currently, there is a fun flicker when toggling maximization or
fullscreen on a window in mutter or more sophisicated compositors
and WMs.
What happens is that the client want so go maximized, so we
calculate the size that we want the window to resize to (640x480),
and then add on its margins to find the buffer size (+10 = 660x500),
and then send out a configure event for that size. The client
renders to that size, realizes that it's maximized, and then
says "oh hey, my margins are actually 0 now!", and so the compositor
has to send out another configure event.
In order to fix this, make the the configure request correspond to
the window geometry we'd like the window to be at. At the same time,
replace set_margin with set_window_geometry, where we specify a rect
rather than a border around the window.
Commit 9aa8ce69 forgot to set shsurf->fullscreen_output in
fullscreen_binding(), causing segfault when fullscreening using key
bindings. This patch fixes that.
https://bugs.freedesktop.org/show_bug.cgi?id=79828
Signed-off-by: Boyan Ding <stu_dby@126.com>
Fixes a crash on touch devices without a pointer, when touching
the window frame of a client.
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Commit a7592019 introduced an optimization that caused some
exposay struct members to not be properly initialized, particularly
cur_output, leading to crashes in some circumstances (e.g. pressing
the down arrow key after going to exposay).
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
With most of the code in send_configure_for_surface, the helper
methods don't give us that much benefit, so stop using them. We
can't kill them off, as they're part of the shell interface and
used by the WM.
Currently, there's a giant bug in how xdg-shell state management
is done. If a client calls set_fullscreen and then set_maximized,
it will get two configure events:
=> set_fullscreen
<= configure(800, 600, [STATE_FULLSCREEN])
=> set_maximized
<= configure(800, 560, [STATE_FULLSCREEN, STATE_MAXIMIZED])
Since fullscreen takes precedence over maximized, the client will
render full-screen at 800x600 first, and then 800x560 next. As
a result, the surface gets the wrong size.
This is because the code that sends out configure requests is
"immediate" -- when an app calls set_maximized, we immediately
send out the configure event that would have happened if we
transitioned immediately into maximized mode.
In wl_shell, this is correct behavior. However, in xdg-shell,
this is wrong. State needs to be more carefully managed in
xdg-shell, as states aren't exclusive.
Pull all the code that sends out configure events out and send
them centrally, based on Weston's on surface state management.
This should work with both wl_shell and xdg_shell's strategies.
Currently, there's a race condition. When resizing from the left, and
a client attaches a buffer after the resize ends, you suddenly see the
buffer jump to the right, because the resize ended while multiple
attaches were in-flight. Making resize a state can fix this, as the
server can now know exactly when the resize ended, and whether a commit
was before or after that place.
We don't implement the correct tracking in this commit; that's left as
an exercise to the reader.
Additionally, clients like terminals might want to display resize popups
to display the number of cells when in a resize. They can use the hint
here to figure out whether they are resizing.
The states system, so far, has been a complicated mix of weird APIs
that solved a real race condition, but have been particularly ugly
for both compositors and clients to implement.
It's a confusing name that comes from the ICCCM. The ICCCM is best
forgotten about.
With the addition of the potential new "transient" role meaning a
parent-relative toplevel like a long-lived popup, used for e.g.
tooltips, the set_transient_for name will become even more confusing.
The check to avoid calling weston_keyboard_set_focus() for a seat that
didn't have a keyboard in restore_focus_state() was cheking the wrong
seat (the one from the previous loop). That caused a crash when
switching workspaces if there was an extra seat that didn't have a
keyboard.
https://bugs.freedesktop.org/show_bug.cgi?id=78349
Views that extend past the bottom of the output are still visible after
the workspace animation ends but before its layer is hidden. When the
layer was hidden, nothing would cause those regions to be repainted,
leading to artifacts.
https://bugs.freedesktop.org/show_bug.cgi?id=78363
With xdg_shell wl_shell starting to diverge in how they work, there's
less shared code in set_fullscreen(). The problem is that the xwayland
window manager calls into set_fulscreen() which now doesn't complete
the fullscreen transition. Add shell_interface_set_fullscreen() for
the shell interface set_fullscreen hook to use.
https://bugs.freedesktop.org/show_bug.cgi?id=78230
send_configure was originally modelled after
wl_shell_surface::send_configure, which takes these arguments. However,
the X WM and xdg_surface::configure variants don't use these arguments.
We already store the resize edges for a surface while it's being
resized, so just use the saved state in the wl_shell_surface variant.
This moves the check for shsurf->grabbed into surface_move() and
surface_resize(), which are shared with the xwayland code. This prevents
trying to resize or move an xwayland window with multiple pointers.
9c376b54ea fixed the crash when a client goes
away during a resize grab. The shsurf->resource is set to NULL in that
case and we were trying to send out events to a NULL resource. However,
xwayland shell surfaces are created by the xwayland module and don't have a
resource. We use a different function pointer for sending the configure
events that handle the events inside xwayland instead of sending protocol
events.
To fix all this, we just move the check for a NULL resource into the
functions that we use for sending configure events for wl_shell and
xdg_shell.
The geometry for visible views will keep unchanged,
weston_view_set_position() doesn't mark these views
as dirty. So there is no chance for them to reassign output, then
these views will disappear.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=72946
Signed-off-by: Xiong Zhang <xiong.y.zhang@intel.com>
When commit 07926d90 factored out the code that chooses in which layer
a surface is added to, it changed the behavior for surfaces with no
type. Instead of not adding it to any layer, the surface is added to
the current workspace.
This patch restores the old behavior.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77527
Previously, desktop-shell would only create its internal shell_seat object
for each seat available when the desktop-shell module is loaded. This is a
problem any time seats are created dynamically. In particular, the Wayland
and RDP backends create seats on an as-needed basis and they weren't
getting picked up proprely by desktop-shell.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77649
lower_fullscreen_surface() was removing fullscreen surfaces from
the fullscreen layer and inserting them in the normal workspace
layer. However, those fullscreen surfaces were never put back in
the fullscreen layer, causing bugs such as unrelated surfaces
being drawn between a fullscreen surface and its black view.
Change the lower_fullscreen_surface() logic so that it lowers
fullscreen surfaces to the workspace layer *and* hides the
black views. Make this reversible by re-configuring the lowered
fullscreen surface: when it is re-configured, the black view
will be shown again and the surface will be restacked in the
fullscreen layer.
https://bugs.freedesktop.org/show_bug.cgi?id=73575https://bugs.freedesktop.org/show_bug.cgi?id=74221https://bugs.freedesktop.org/show_bug.cgi?id=74222
If a client exists during a resize grab, the resource for the shell
surface being resized is destroyed. The shell surface is not destroyed
immediately, however, because of the window close animation. In that
case, the compositor would crash trying to send configure events to
the surface being resized, since it would pass a NULL pointer to
wl_resource_post_event().
The code for the resize grab was already able to handle the surface
going away, so expand it to also handle the resource going away and
fix the crash.
https://bugs.freedesktop.org/show_bug.cgi?id=77344
In order to do the window close animation, a reference for a destroyed
surface is kept. However, the reference count was also increased for
unmapped surfaces, in which case the animation wouldn't run. Since the
reference count was decremented in the animation done function, it would
never be decreased for unmapped surfaces, causing them to not be
released.
The close animation also changed how shell surfaces are released. The
destroy function for its resource was changed to not deallocate the
surface, and instead keep it around until the animation finishes and
the weston surface is destroyed. The destruction should happen in the
destroy listener for the weston surface, but it wouldn't destroy the
shell surface in the case the resource was still valid, assuming that
it would be freed in the resource destroy function.
We now dynamically move the input panel (i.e. virtual
keyboard) surface to the output containing the currently
focused surface.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=71015
Signed-off-by: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
It is possible that an input panel will be shown quickly, hidden and
shown again, before the animation for the first appeareance finished.
In that case, another animation would be created and the effect of the
two combined could cause the panel to not appear in the screen.
This patch fixes this by keeping a reference to the previous animation
and deleting it when a new one is created.
We now carry the shell_client around with each shell_surface. This is much
more reliable than tacitly assuming that there is only one wl_shell or
xdg_shell instance bound to a particular wl_client. In particular, weston
would crash when a client bound to both wl_shell and xdg_shell even if it
only ever used one of them.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Previously, the repositioning logic would iterate the compositor's list
of layers and move the views on those layers. However, that failed in
two different ways: it didn't cover hidden workspaces and crashed when
the display was locked.
This patch changes the logic to explicit iterate over all the layers
owned by the shell. The iteration is done through a helper function,
shell_for_each_layer().
https://bugs.freedesktop.org/show_bug.cgi?id=76859https://bugs.freedesktop.org/show_bug.cgi?id=77290
When a fullscreen surface gets the maximized state, the function
reset_surface_type() is called and that causes unset_fullscreen() to be
called. That function would set the value of shsurf->fullscreen_output
to NULL. However, since the surface still has the fullscreen state, it
will be configured as a fullscreen surface again, and an attempt to
access that field would cause the compositor to crash.
Fix the crash by keeping the value of fullscreen_output around after
unset_fullscreen(). This is safe since the value is only used when a
surface has the fullscreen state and is replaced on a new request to
make the surface fullscreen.
https://bugs.freedesktop.org/show_bug.cgi?id=76867
