The ensure_single_mode() helper replaces an output's single mode.
Extract it into libweston so it can be reused by the VNC backend,
and rename it to weston_output_set_single_mode().
At the same time, set the the previously missing
WL_OUTPUT_MODE_CURRENT flag on the new mode.
Fixes#758
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Remove plane->damage and instead accumulate damage on paint
nodes.
This is a step towards allowing multiple overlapping outputs.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Tracking the view's plane in the paint node in this way is a step towards
inflicting plane damage from paint node update during the output repaint,
instead of manually doing weston_view_damage_below().
We remove view->plane entirely and do all access through pnodes.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Now that we have visibility for views, we can clip that to an output
and store it in paint nodes.
This requires us to split the paint_node_update() function into two,
one for things that need to be done before assign_planes() and
one for after.
This will eventually be useful for tracking damage with paint nodes,
as we'll need to damage a paint node's entire visible area for
some operations.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Pretty cosmetic right now, but make the ALL_DIRTY only contain set
bits, and fix the accidentally sparse bitfield.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
If we want to support multiple backends, the compositor must take care
to call this once, at the appropriate moment, so stop letting the
backends handle compositor shutdown themselves.
Move the weston_compositor_shutdown() calls from the backend::destroy
callbacks into weston_compositor_destroy() and the calls in the backend
creation error paths into weston_compositor_load_backend().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Based on patches from:
Peter Hutterer <peter.hutterer@who-t.net>
Lyude Paul <thatslyude@gmail.com>
Bastian Farkas <bfarkas@de.adit-jv.com>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Introduces three new structs, weston_tablet and weston_tablet_tool for the
respective devices, with the respective information as it's used on the protocol.
And weston_tablet_tool_id to track the tools of a tablet.
Note that tools are independent of tablets, many tools can be used across
multiple tablets.
The nesting on the protocol level requires a global tablet manager, a tablet
seat nested into weston_seat. The list of tablets and tools are also part of
the weston_seat.
Most functions are stubs except for the actual tablet and tablet tool
creation and removal.
This is based on patches from Peter Hutterer <peter.hutterer@who-t.net> and
Bastian Farkas <bfarkas@de.adit-jv.com>.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
We're pushing more and more mutable state into paint nodes, but this state
has a non-zero cost to rebuild every render.
Let's take care to track when we need to rebuild the state.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Add weston_renderbuffer_ref/unref() functions and use them to
eventually destroy the weston_renderbuffer. Drop the explicit
renderbuffer_destroy vfunc from the pixman renderer interface.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add a private struct pixman_renderbuffer that derives from struct
weston_renderbuffer and move the pixman renderer specific image and link
fields into it.
Add a pixman_renderbuffer_get_image() helper for the backends that need
to access the contained pixman image, RDP and X11.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add a damage region to struct weston_renderbuffer and use it to replace
the previous_damage tracking in the drm backend.
Keep renderbuffers on a list in struct pixman_output_state and use it
to accumulate damage on all renderbuffers during repaint_output.
Now renderbuffers have to be created when pixman output state already
exists.
Reorder renderer output state and renderbuffer creation accordingly.
With this, pixman_renderer_output_set_hw_extra_damage() can be removed.
This can not yet replace the external damage tracking in the VNC
backend, which needsto know the accumulated damage that is not returned
from repaint_output.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add a struct weston_renderbuffer parameter to repaint_output and make
backends set the pixman image renderbuffer through this parameter
instead of using pixman_renderer_output_set_buffer()
Turn pixman_renderer_output_set_buffer() static.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add a create_image_from_ptr vfunc to struct pixman_renderer_interface,
which wraps weston_renderbuffer creation for the pixman renderer via
pixman_image_create_bits(), as well as a renderbuffer_destroy vfunc
to dispose of the pixman image renderbuffer.
Also add create_image_no_clear using pixman_image_create_bits_no_clear()
instead.
Make the backends create and destroy their pixman image renderbuffers
through this interface.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add a struct pixman_renderer_interface with output_create and
output_destroy vfuncs and store a pointer to it in struct
weston_renderer.
Make all backends access the pixman_renderer_output_create/destroy
functions through this interface and turn them static.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Move the struct gl_renderer_interface pointer from the backends into
the weston_renderer structure. The interface struct only contains
function pointers that never change, so make it const.
Load and initialize the GL renderer in libweston instead of in the
backends, using the new weston_compositor_init_renderer() function.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We already store the buffer_to_output, and this is just the inverse.
The pixman renderer will use the inverted version.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Similar to the backend type, also expose the renderer type enum as ABI.
This makes it possible to implement a more consistent config API, as
opposed to every backend hand-rolling its own use-the-other-one bool.
The enums are explicitly numbered to avoid 0, so 0 can be used as a
'not-specified' sentinel value to allow backwards compatibility with the
old config interfaces.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Move the renderer type from struct headless_backend into struct
weston_renderer to store the chosen renderer type in a unified manner.
This will later allow secondary backends to determine the renderer type
chosen by the primary backend.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add tests to validate that weston_matrix_to_transform() works properly
on the matrices generated by weston_surface_build_buffer_matrix() and
weston_output_update_matrix()
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Instead of basing this on simple checks, we can test the matrix. This
should result in more opportunistically picking fast nearest neighbour
filtering when it won't result in visible distortion.
For now we only use this in the gl renderer, as paint nodes aren't
plumbed into the pixman renderer yet.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This can be helpful in testing if a paint node needs linear vs nearest
neighbour filtering, or if a view can be placed on a plane.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Add user authentication support for remote backends via PAM.
This requires a configuration file /etc/pam.d/weston.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
The current code only prints this once, and this is a probably a sensible
thing to do, as a clock read failure is probably not a condition that will
correct itself.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Previously renderers were not told when the output (framebuffer they
need to draw) size changed. Renderers just pulled that information out
from weston_output::current_mode when they happened to need it. This
makes some things awkward, like resizing the shadow or intermediate
buffers. In fact, Pixman-renderer does not even support resizing its
shadow buffer, nor does GL-renderer. DRM-backend has to destroy and
re-create the renderer output state anyway, but rdp, x11 and wayland
backends would be natural users of resizing API.
This commit adds an API for resizing with empty implementations. Actual
implementations will be added in following patches for each renderer
while moving parts of resizing code from backends into the renderers.
No-op renderer needs no implementation.
Only wayland-backend has actual resizing code already, and that is made
to call the new API. Unfortunately, Pixman and GL renderers differ: one
does not blit them while the other does. In order to assert the
functionality of each renderer to keep the API consistent,
wayland-backend needs to lie to pixman-renderer. That's not new, it
already does so in wayland_output_get_shm_buffer() where the 'pm_image'
addresses only the interior area instead of the whole buffer.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Replace all uses of weston_transform_region with
weston_matrix_transform_region, then remove the function completely.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
New function that transforms a pixman_box32_t rectangle by a matrix.
Since pixman rectangles are represented by 2 corners, non-90 degree
rotations can't be properly represented. This function gives the
axis aligned rectangle that encloses the rotated rectangle.
We use this for weston_matrix_transform_region(), simplifying it and
allowing it to work for non 90 degree rotations.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Everywhere we are standardising to drm_fourcc.h pixel format codes, and
using struct pixel_format_info as a general handle that allows us to
access the equivalent format in various APIs. In the name of
standardisation, convert weston_compositor::read_format to
pixel_format_info.
Pixman formats are defined CPU-endian, while DRM formats are defined
always little-endian. OpenGL has various definitions. Correctly mapping
between these when the CPU is big-endian is an extra chore we can
hopefully offload to pixel-formats.c.
GL-renderer read_format is still defined based on Pixman format, because
of the pecualiar way OpenGL defines a pixel format with
GL_UNSIGNED_BYTE. That matches the same Pixman format on big-endian but
not the same drm_fourcc.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
'color_characteristics_config_error' test ensures that all code paths in
parse_color_characteristics() and wet_output_set_color_characteristics()
get exercised. The return value and logged error messages are checked.
Other cases test the weston_hdr_metadata_type1 validation.
These are for the sake of test coverage, but also an example of how to
test a function from main.c, and how to capture messages from
weston_log().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Now that we can reliably access buffer dimensions from weston_buffer,
and gl-renderer isn't doing strange things with buffer widths, just use
that. The renderer interface is now unused and can be deleted.
Signed-off-by: Daniel Stone <daniels@collabora.com>
No-one should be implementing an external renderer, so move the
interface out of the public header.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Add a mode argument to weston_buffer_reference which indicates whether a
buffer's storage may/will be accessed, or whether the underlying storage
will no longer be accessed, e.g. because it has been copied. This will
be used to retain a pointer to the weston_buffer whilst being able to
send a release event to the client.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Seems that we're still missing layer clean-ups, with the touch
calibrator being one of them. Call the appropriate function when
shutting down the compositor instance.
Fixes: #603
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Add enum try_view_on_plane_failure_reasons to help us to keep track of
the reason why promoting view to a plane failed. We also add a variable
to struct weston_paint_node so that we can update this information in
each output repaint.
This will be used in the next commits, in which we add proper surface
dma-buf feedback support.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
It simply returns the number of format/modifier pairs in the array. This
will be useful for the next commits, in which we add support for dma-buf
feedback.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Since commit "drm-formats: save result of intersection in the first
array", every block of code where weston_drm_format_array_create() and
destroy() are being called could use init() and fini() instead.
Remove these two functions from the API to make it leaner. This patch
also modifies the code that depends on these functions to use init() and
fini().
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
In the current API, we have some set operations: join, intersect and
subtract. Both join and subtract receives two DRM format arrays and save
the result in the first one.
For the intersection we have a slightly different approach, what makes
the API weird. We don't save the result in the arguments, instead we
return a new array with the result.
Modify weston_drm_format_array_intersect() in order to make it similar
to the other two set operations.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
And ultimately, fail to start when there are no input devices on the
system. Patchs adds consistency to touch/pointer initialization to
return -1 in case same thing happens.
Further more, when the device is not created we can't assume to retrieve
a valid one from a libinput_device so guard against it. This takes care of
hot-plugging situations when we couldn't create the (keyboard) device,
or when removing it.
Fixes: #117, #402, #485
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
See: https://gitlab.freedesktop.org/wayland/weston/-/issues/467#note_814985
This starts building the framework required for implementing color
management.
The main new interface is struct weston_color_manager. This commit also
adds a no-op color manager implementation, which is used if no other
color manager is loaded. This no-op color manager simply provides
identity color transforms for everything, so that Weston keeps running
exactly like before.
weston_color_manager interface is incomplete and will be extended later.
Colorspace objects are not introduced in this commit. However, when
client content colorspace and output colorspace definitions are
combined, they will produce color transformations from client content to
output blending space and from output blending space to output space.
This commit introduces a placeholder struct for color transforms,
weston_color_transform. Objects of this type are expected to be heavy to
create and store, which is why they are designed to be shared as much as
possible, ideally making their instances unique. As color transform
description is intended to be generic in libweston core, renderers and
backends are expected to derive their own state for each transform
object as necessary. Creating and storing the derived state maybe be
expensive as well, more the reason to re-use these objects as much as
possible. E.g. GL-renderer might upload a 3D LUT into a texture and keep
the texture around. DRM-backend might create a KMS blob for a LUT and
keep that around.
As a color transform depends on both the surface and the output, a
transform object may need to be created for each unique pair of them.
Therefore color transforms are referenced from weston_paint_node. As
paint nodes exist for not just surface+output but surface+view+output
triplets, the code ensures that all paint nodes (having different view)
for the same surface+output have the same color transform state.
As a special case, if weston_color_transform is NULL, it means identity
transform. This short-circuits some checks and memory allocations, but
it does mean we use a separate member on weston_paint_node to know if
the color transform has been initialized or not.
Color transformations are pre-created at the weston_output
paint_node_z_order_list creation step. Currently the z order lists
contain all views globally, which means we populate color transforms we
may never need, e.g. a view is never shown on a particular output.
This problem should get fixed naturally when z order lists are
constructed "pruned" in the future: to contain only those paint nodes
that actually contribute to the output's image.
As nothing actually supports color transforms yet, both renderers and
the DRM-backend assert that they only get identity transforms. This
check has the side-effect that all surface-output pairs actually get a
weston_surface_color_transform_ref even though it points to NULL
weston_color_transform.
This design is inspired by Sebastian Wick's Weston color management
work.
Co-authored-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This patch creates a per-output paint node list in the same z-order as
the global view_list in weston_compositor.
The next step is to switch output repaints and backends to use the
z-order list instead of view_list.
Having a per-output paint node list for repaints allows including only
those paint nodes that actually contribute to the output image, so that
completely occluded and out-of-screen views can be ignored in libweston
core already.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>