This reverts commit 188a3ebd5e.
Call weston_compositor_enable_color_management_protocol() after
compositor->color_manager has been set, and so allows to check if the
color manager supports the features mandatory in protocol. The check is
added in the next patch.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This makes it more explicit that this indeed is increasing the reference
count, rather than just returning a pointer.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Currently we create the color profile id generator in
weston_compositor_backends_loaded() and destroy it in
weston_compositor_shutdown().
If something goes wrong and Weston does not start properly, we end up
calling weston_compositor_shutdown() for a struct weston_compositor
whose color profile id generator is NULL, crashing.
This fixes that, creating/destroying the id generator in
weston_compositor_create()/destroy().
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Damages and captures both trigger repaints of outputs. Some
configurations don't care about damages and use headless only for
captures. This commit adds a new feature to libweston that lets
outputs repaint only on captures, not on damages. The headless backend
enables that new feature when given a special refresh rate of 0 mHz.
Signed-off-by: Loïc Molinari <loic.molinari@collabora.com>
In this MR we add support to the majority of the interfaces from the
color-management protocol.
That means that we are able to advertise output's images descriptions to
clients, preferred surface images descriptions, and so on. We also
support clients that wants to create ICC-based images descriptions and
set such descriptions for surfaces.
We still don't support the interface to allow clients to create
image descriptions from parameters, but that should be addressed
in the near future.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This is preparation for the CM&HDR protocol implementation. It requires
us to give a unique id to each color-profile, so let's do that.
In this commit we introduce a generic id generator to libweston, and
its first user: the color-profile.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
It adds the followig paragraph:
```
Starting from version 5, the invalid_format protocol error is sent if
all planes don't use the same modifier.
```
We already assumed this in some places and, most importantly, it's
required by the kernel. Thus alter `dmabuf_attributes.modifier` to make
it clear that different modifiers for multi-planar dmabufs were never
supported.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
commit 79212ba9ad fixed a bug by
introducing a new one.
Before that point we could clip paint node damage to stale
visibility data. After that point we post damage for occluded
views, leading to large amounts of pointless drawing.
Add back the clip to visible region, in
weston_output_flush_damage_for_plane(), where we have up to date
visibility region information.
fixes 79212ba9ad
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
If client changes the buffer transform or size and re-commit the surface
before surface dirtys buffer (weston_surface_attach), the viewport
source validity check may fail. Because the width_from_buffer and
height_from_buffer cannot be updated based on new buffer transform.
Therefore, add the situation of size dirty (WESTON_SURFACE_DIRTY_SIZE) to
source validity check, width_from_buffer and height_from_buffer can be
updated in time when the buffer transform and scale change.
Signed-off-by: Chao Guo <chao.guo@nxp.com>
Currently we flush damage for the "primary plane" every repaint, but this
is folly.
The drm backend may skip rendering entirely if using an all-planes
composition. This could leave the renderer plane in a messy state if a
surface on an overlay plane disappears.
Instead, let the backends flush the primary plane damage when they know
they need to render.
Fixes#864
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This was added in 4def21c196.
0c1ab2ad76 removed all uses of NULL
weston_compositor, making the workaround unnecessary.
Drop the workaround, it's dead code.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Now that overlapping outputs are a thing, we have a problem with vnc
cursors.
The surface->damage used to update the vnc cursor might actually be
flushed by a previous output's repaint cycle, leading to a missing cursor
update to the vnc client.
Instead we should use the damage accumulated on the cursor plane to choose
when to update the cursor. This damage is in output coordinates, so let's
be lazy and just use the presence of damage as an indicator that the
cursor needs an update.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
VISIBILITY_DIRTY is used to apply damage to the plane, but that doesn't
make sense for non-primary planes.
For example, we don't want moving the cursor to result in damage being
registered on the cursor plane.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
When an output repaints, it calculates visibility for its paint nodes,
accumulates damage for all paint nodes across all outputs, and then
paints.
This means that when it's accumulating damage for all paint nodes in
paint_node_add_damage(), it may be accumulating damage to nodes on other
outputs that haven't had their visible regions updates yet.
This leads to clipping with a stale visibility region, and losing damage.
Let's just drop the clip here for now - there are already other places
where paint nodes have to carry damage outside their visible regions.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Stop assuming that NULL represents the stock sRGB color profile. From
now on, query the stock sRGB color profile from the color manager.
This should be internal to libweston (core and the color plugins), and
users of the libweston public API should not be affected by this. They
are still allowed to set an output color profile to the stock sRGB using
NULL.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Ignore any client-supplied offset to subsurface commits to keep the same
consistency we find on other compositor.
Fix: #829
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Any coordinate that didn't change during clamping was left uninitialized,
resulting in failures later.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Between assign_planes() and pnode_update_late(), the pnode's plane may
not yet be up to date. This leads to the visible region being incorrectly
calculated for paint nodes beneath a paint node that changes planes. Their
visible regions will still contain a cut out for the node that no longer
occludes them.
However, we place damage on nodes beneath a node that changes planes in
order to redraw the region beneath a node that moves from the primary to
non-primary plane.
The gl-renderer clips to a paint node's visible region when rendering it,
so this accidental cut-out masks away all the damage and leaves us with
a mess.
Fix this by using the correct plane in the visibility calculation.
Fixes#821
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
If coverage and power status are the same, we should prefer a primary
backend over a secondary one.
Fixes#818
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
When an output power state changes, it may become or no longer be the
best primary output for a view.
Fixes#819
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
If our primary output is turned off, we won't get frame events, so let's
try really hard to prioritize a turned on output with coverage.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
The counterpart to weston_surface_is_unmapping(). This is valid for the
duration of processing the surface commit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If a surface has already been mapped, just return early out of
weston_surface_map(), rather than firing the map signal and rebuilding
the view list.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We already have these for global coordinates, now we have them for
surface coordinates too. In addition to removing some unsightly
unadorned coordinate usage, this also adds appropriate coordinate space
id checks at runtime.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This is a tricky bit of code and we use it in two places. Let's make a
single implementation.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This avoids spreading around the knowledge that the primary backend is
the first backend on weston_compositor::backend:list.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Let weston_compositor_load_backend() return a backend pointer and remove
the backend pointer from struct weston_compositor.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Releasing the buffer reference here works because the backend has seen the
surface and has updated keep_buffer if necessary. With multiple backends
the assumption breaks. The same surface may be visible (now or later) on an
output from another backend. This backend has not seen the buffer yet so it
cannot update keep_buffer.
As a result, the reference is released to early. A surface that is rendered
on a secondary backend first can no longer be placed on a plane on a DRM
backend.
To avoid this, always keep the buffer reference until it is replaced when
multiple backends are involved.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
All backends add themselves to weston_compositor::backend_list now.
Drop the workaround that catches unconverted backends that still set
weston_compositor::backend.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Before loading a backend, clear the weston_compositor::backend pointer
to check whether the backend supports multi-backend operation and adds
itself to the weston_compositor::backend_list.
Keep weston_compositor::backend pointing to the last loaded backend
either way, to allow the calling compositor code to store it away for
later, to check whether a head belongs to a given backend in the output
configuration code. This workaround can be removed after all backends
are converted to be multi-backend aware.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In preparation for multi-backend support, determine the presentation
clocks that are supported by all backends.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
In preparation for multi-backend support, start/flush/cancel repaint on
all backends by looping over the weston_compositor::backend_list.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In preparation for multi-backend support, add a list of backends to the
weston_compositor structure. Until backends are converted, this list
just contains the single weston_compositor::backend. Keep that pointer
for now, until the conversion is complete.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Extract the finish frame timestamp code and the call to
weston_output_finish_frame() into a new helper function
weston_output_finish_frame_from_timer() that can be reused
by the other timer driven backends sharing the same logic.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Extract pipewire_output_arm_timer() into libweston so it can be reused
by the other timer driven backends that use the same delay logic.
Call the shared function weston_output_arm_frame_timer().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There are many times when we want to set a global position with a surface
offset added.
It's a fairly nasty operation, and most places in the code currently do
it naively, ignoring the painful existence of freeform window rotations
and other complex transforms that could be in play (but probably aren't)
Add a helper for this and convert existing usage.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Allow passing NULL to monitor string in order to set the default
"unknown" strings. This allows a head to be initialized with the default
strings, meaning that it will no longer be mandatory for a backend to
call weston_head_set_monitor_strings(). In DRM-backend case this makes
future changes more convenient.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We never expected these strdups to fail, and things tend to assume these
fields are not NULL (except serial_number).
Use xstrdup to ensure that a catastrophic OOM is immediately obvious.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Initialize no-op color manager in weston_compositor_backends_loaded()
if weston_compositor_load_color_manager() was never called.
This makes weston_compositor_load_backend() live up to its name and
prepares it to be called multiple times.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Move the presentation clock selection loop into
weston_compositor_set_presentation_clock() and refactor
weston_compositor_backends_loaded() to make it possible
to add more functionality.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Since we use paint nodes to track damage, we have to be very careful to
make sure that we never have paint nodes that aren't actually being
displayed on their outputs.
Shells may move views to invisible layers (minimized_layer, inactive_layer)
and this currently leaves the paint node alive but not visible on its
output.
When this happens, the paint node's previous visible region is left
undamaged, and the paint node is removed from processing.
Let's delete paint nodes when their views change layers, thus creating
damage for their full visible region.
This may create excess damage if the paint node moves between two visible
layers, but this is probably far less harmful than leaving pieces of
invisible views on screen.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Commit 43b59786 errantly claimed that paint_node_damage_below() needed to
damage all planes because it's used when moving paint nodes between
planes.
This is wrong because the destination plane will receive damage correctly
from paint_node_update_late() when the node's visible region is added to
its damage.
Leave the rest of that commit's changes, but make it once again only
damage the plane the node is currently on.
The problem this caused is easily seen by turning on triangle fan debug
and moving the mouse. Extra damage is generated beneath the cursor plane.
Fixes 43b59786
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Let backends declare the presentation clocks they can use with a
new bitfield weston_backend::supported_presentation_clocks and set
presentation clock after loading the backend in the compositor.
Make weston_compositor_set_presentation_clock() internal and replace
weston_compositor_set_presentation_clock_software() with an exported
weston_compositor_backends_loaded(), which is called by the compositor
after the backend is loaded.
In the future, this can be extended to determine the subset of clocks
supported by all backends.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Whenever a view is moved, we should schedule a repaint for the outputs
the view is on. This avoids users having to do it by hand every time
they change something. There is no change in determinism of behaviour
(e.g. 'I can reconfigure views as often as I like and it won't take
effect until I schedule a repaint' isn't true, because output repaints
might happen for reasons outside your control).
Signed-off-by: Daniel Stone <daniels@collabora.com>
This list walk is broken, the intent was to walk the tail of the list
starting from the currently held node - but that is not what happens.
Instead, walk the list backwards and stop a the held node.
Also, paint_node_damage_below() is used when moving paint nodes between
planes, and in these cases we definitely don't want to limit damage to
the current plane.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
