The old code for scheduling configure events on idle looked like:
if (configure_scheduled) {
if (this_event_is_the_same) {
remove_timer();
return;
}
}
If we queued one new event (either changed, or the client had never
received any configure event), followed immediately by one event which
was the same as the first, we would delete the scheduled send of the
first event.
Fix this by treating unconfigured surface as never the same.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Without this weston crashes when a client using xdg-shell-v5 is run.
Signed-off-by: Arnaud Vrac <rawoul@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
commit 749637a8a3
introduced this feature, but the break is outside of any conditional
so only the first item in the list is ever tested.
If a client skips a few configures and then acks the most recent
it's still operating within spec, so the break should only occur
when a match is found.
This version also adds a break after we miss the target, as a tiny
optimization (the list will be cleaned up on disconnect anyway),
as it makes the code no more difficult to read or maintain.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Shell surfaces may have a geometry that is different to the size of
their main surface, e.g. due to subcompositing.
In states where size is strictly enforced (fullscreen and maximized),
the size that the compositor wants must be checked against the window
geometry and not just the main surface size.
Fix by calling weston_desktop_surface_get_geometry and using that size
instead of main surface size.
Signed-off-by: Philipp Kerling <pkerling@casix.org>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
This is a simple wrapper for casting the user data of a wl_resource into
a struct weston_output pointer. Using the wrapper clearly marks all the
places where a wl_output protocol object is used.
Replace ALL wl_output related calls to wl_resource_get_user_data() with
a call to weston_output_from_resource().
v2: add type assert in weston_output_from_resource().
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Armin Krezović <krezovic.armin@gmail.com>
When we receive configure_notify we should update the surface's
position by calling xwayland_api->set_xwayland(). Otherwise some surfaces
like dnd surfaces from xwayland views are "stuck" at one place. When
setting XWAYLAND state though we should always call view_set_position(),
not just the first time we set this state.
Signed-off-by: Ilia Bozhinov <ammen99@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Now we keep track of serial->state association and we discard the states
that the client ignored.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
We were checking against the pending size, which lead some clients
(simple-egl) to crash because they sent a buffer before acknowledging
the latest configure event.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Tested-by: Emmanuel Gil Peyrot <emmanuel.peyrot@collabora.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
When switching a state twice in a row, we were overwriting the old value
without setting it back, sending a wrong state to the client.
Now we update our requested state, then check if we need to schedule a
configure event, if we have one scheduled already or even if we can
cancel it.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Fix up the window position whenever the geometry info changes.
If the window geometry changes, we want to keep the input-responding
content anchored to top-left. It is done by manipulating the dx,dy
arguments originating from a wl_surface.attach request.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>
X11 applications expect -geometry command line option to work for
setting the initial window position, but currently this does not work.
Add provision to relay the initial position through libweston-desktop:
- weston_desktop_api gains a new entry set_xwayland_position
- implement set_toplevel_with_position() in xwayland internal interface
Once xwayland plugin starts calling set_toplevel_with_position(),
libweston-desktop can relay that information to a shell if the shell
wants to hear it.
If a shell does not implement the set_xwayland_position hook, the
old behaviour remains: the shell positions xwayland toplevels like any
other.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Currently, layers’ order depends on the module loading order and it does
not survive runtime modifications (like shell locking/unlocking).
With this patch, modules can safely add their own layer at the expected
position in the stack, with runtime persistence.
v4 Reviewed-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
[Pekka: fix three whitespace issues]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Helps tracking what happens with XWM.
Use the same debugging guard as XWM.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
X client's don't have a wl_client associated with their
weston_desktop_client, so make sure to not use it.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
No need to add protocol/, as it's already handled by an explicit
compiler include path.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Dima Ryazanov <dima@gmail.com>
The xwayland window type XWAYLAND is not handled by the shell at all,
instead libweston-desktop maps such surfaces itself. However, it forgot
to set weston_surface::is_mapped and weston_view::is_mapped.
weston_surface::is_mapped affects the behaviour of weston_view_unmap()
and weston_surface_attach().
weston_view::is_mapped affects the behaviour of weston_view_unmap() and
weston_view_destroy().
When manually mapping a window of type XWAYLAND, mark both the view and
surface as mapped. This follows the expections in libweston, even though
the meaning of is_mapped is not clearly defined for either surface or
view.
Also, when the XWAYLAND window is manually unmapped, unmap the
weston_surface. This updates weston_surface::is_mapped to reflect the
state. However, as a side-effect it will also unmap all sibling views,
should any exist.
v2: rename surface_base to wsurface
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Daniel Stone <daniels@collabora.com>
Add documentation (asserts) that show that windows of types XWAYLAND are
never registered with the shell.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Setting to a constant is much easier to read and grep for than setting to
a computed variable.
There are no functional changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Add an assert to ensure that a window of type XWAYLAND is never
attempted with a parent. Following the code though, the assert can be
made even stricter by allowing only TRANSIENT to have a parent.
This is essentially adding documentation.
v2: use stricter assert
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Daniel Stone <daniels@collabora.com>
According to the xdg-shell v6 protocol a positioner object is only
complete if both the size and its anchor rectangle are set. Ensure the
weston clients do this and let weston be more strict on checking if a
client has done so.
This also fixes weston-terminal popups not showing up on gnome-shell
3.22.
Signed-off-by: Sjoerd Simons <sjoerd.simons@collabora.co.uk>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
The wl_shell_surface spec says that it is destroyed automatically by the
server when the wl_surface is destroyed, and indeed it does not have a
destroy request. So, do that.
Signed-off-by: Giulio Camuffo <giuliocamuffo@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Fixes:
implicit conversion from enumeration type '...' to different
enumeration type '...' [-Wenum-conversion]
Signed-off-by: Armin Krezović <krezovic.armin@gmail.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Even if the surface size is already correct, we need to store the
configured size in case some other state change triggers a configure
event.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Arnaud Vrac <avrac@freebox.fr>
These requests need a mapped surface, which can only happen after the
initial configure event.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This way we are sure the compositor is aware of a surface when we
forward a request for said surface.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
With this weston_view_destroy() call, Xwayland popups make Weston freeze
in a busy-loop (probably corrupted wl_list).
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
It doesn't destroy the view per se (except for internal surfaces) and
require the caller to also destroy the view itself at the appropriate
time.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Instead we store the buffer move and just use it when the signal is
fired.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
This is what we are interested in for real, and new_buffer is wrongly
named.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Also remove ${pkgincludedir} to be on par with libweston.pc.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
libweston-desktop is an abstraction library for compositors wanting to
support desktop-like shells.
The API is designed from xdg_shell features, as it will eventually be
the recommended shell for modern applications to use.
In the future, adding new shell protocols support will be easier, as
limited to libweston-desktop.
The library versioning is the same as libweston. If one of them break
ABI compatibility, the other will too.
The compositor will only ever see toplevel surfaces (“windows”), with
all the other being internal implementation details.
Thus, popups and associated grabs are handled entirely in
libweston-desktop.
Xwayland special surfaces (override-redirect) are special-cased to a
dedicated layer, as the compositor should not know about them.
All the shell error checking is taken care of too, as well as some
specification rules (e.g. sizes constraint for maximized and fullscreen
surfaces).
All the compositor has to do is define a few callbacks in the interface
struct, and manage toplevel surfaces.
Signed-off-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Giulio Camuffo <giulio.camuffo@kdab.com>
Differential Revision: https://phabricator.freedesktop.org/D1207
Quentin Glidic