matrix.c needs to be built differently for a test program vs. everything else,
so it cannot be in a helper lib. Instead, make a dependency object for it for
easy use which always gets all the paths correct automatically.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Replace the old config printer with the new fancy one: less duplicate code,
more details logged.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Print details of all available EGLConfigs in case none match what we are
looking for. This helps debugging.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
If configless_context is not supported, we pick one EGLConfig as the "base
config" because we have just one GL context and different configs between the
context and EGLSurfaces might not work. Until now, we did not actually make
sure to pick the base config.
If the base config matches the requirements, prefer it. Only if it doesn't
match, go looking for another config.
This should give better chances of success on systems where configless_context
is not supported by relying less on eglChooseConfig().
Cc: Madhurkiran Harikrishnan <madhurkiran.harikrishnan@xilinx.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
If we don't have the surfaceless_context extension, we create a pbuffer as a
dummy surface to work with. If we also don't have configless_context, then it
is possible the config used for creating the context does not support pbuffers.
Therefore, if both conditions apply, we need to pick a config that supports
both window and pbuffer surfaces.
This makes the "base" config compatible, but it does not yet guarantee that we
actually pick it again when creating the pbuffer surface. Fixing that is
another patch.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Fold more code into the common config choosing, the pbuffer path this time.
Simplifies code and allows gl_renderer_get_egl_config() to grow smarter in the
future to guarantee config compatility in the absence of configless_context
extension.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Now that all backends pass in a list of acceptable DRM formats, that is used to
determine if the EGLConfig has an alpha channel or not. Therefore the
opaque_attribs and alpha_attribs are now useless, and we can remove the whole
config_attribs argument from the API.
gl_renderer_get_egl_config() uses an internal attrib list that matches at least
the union of the opaque_attribs and alpha_attribs matches.
Overall, behaviour should remain unchanged.
The new attribute array becomes variable in the future, so it is left
non-const.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Define a specific DRM format for the GL-renderer to render in. It goes through
fuzzy matching in egl-glue.c which ensures we get exactly the number of bits
for each channel, but does not require an exact format match.
This ensures we get the bit depth we expect instead of the first arbitrary
EGLConfig.
This should not change the current behaviour, because Mesa EGL takes care to
order the configs as apps expect.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Define a specific DRM format for the GL-renderer to render in. It goes through
fuzzy matching in egl-glue.c which ensures we get exactly the number of bits
for each channel, but does not require an exact format match.
This ensures we get the bit depth we expect instead of the first arbitrary
EGLConfig.
This should not change the current behaviour, because Mesa EGL takes care to
order the configs as apps expect.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Implement fuzzy EGLConfig pixel format matching, where we ensure that R, G, B
and A channels have the expected number of bits exactly. This is used on EGL
platforms where the EGLConfig native visual ID is not a DRM format code. On EGL
GBM platform, the old exact matching of native visual ID is kept.
As only the DRM backend uses a DRM format list for picking a config, this patch
should not change any behaviour.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Using arrays of pixel_format_info instead of just DRM format codes is useful
for fuzzy matching of formats with EGLConfigs in the future. The immediate
benefit is that we can easily print format names in log messages.
We should never deal with formats we don't have in our database, so discarding
unknown formats should be ok. Using unknown formats would become hard later,
too.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
These fields are necessary when looking for an EGLConfig matching a pixel
format, but the configs do not expose a native visual id. Such happens on the
EGL surfaceless platform where one does not actually care about the exact pixel
format, one just cares it has the right number of bits for each channel and the
right component type.
FP16 formats are coming, so this paves way for them too, allowing them to be
described.
The FIXED/FLOAT terminology comes from EGL_EXT_pixel_format_float.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
If configless context is supported, we can skip choosing the "base" config
completely as it will never be used.
This simplifies the code a little bit.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Replace a direct call to egl_choose_config() with a higher level function
gl_renderer_get_egl_config(). This will make follow-up work easier when
attribute lists will be generated inside gl_renderer_get_egl_config() instead
of passed in as is.
We explicitly replace visual_id with drm_formats, because that is what they
really are. Only the DRM backend passes in other than NULL/0, and if other
backends start caring about the actual pixel format, drm_format is the lingua
franca.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In an attempt to pull more of EGLConfig choosing into one place, refactor code
into the new gl_renderer_get_egl_config(). The purpose of this function is to
find an EGL config that not only satisfies the requested attributes and the
pixel formats if given but also makes sure the config is generally compatible
with the single GL context we have.
All this was already checked in gl_renderer_create_window_surface(), but
gl_renderer_create_pbuffer_surface() is still missing it. This patch is
preparation for fixing the pbuffer path.
We explicitly replace visual_id with drm_formats, because that is what they
really are. Only the DRM backend passes in other than NULL/0, and if other
backends start caring about the actual pixel format, drm_format is the lingua
franca.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Start a new source file for EGL glue stuff, for the EGL platform Weston runs
on. gl-renderer.c is getting too long, and I want to add even more boring code
(config pretty-printing etc.).
This pure code move, no changes.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Some extensions (such as EGL_KHR_partial_update) add functions to EGL.
When the extension is present, GetProcAddress must return usable
function pointers for those entrypoints.
Assert that GetProcAddress returns a non-NULL function pointer in these
cases.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Some drivers support EGL_EXT_image_dma_buf_import_modifiers for format
enumeration, but don't have any modifiers. In this case, on platforms where
malloc(0) returns non-NULL, we would leak that allocation to the caller.
Handle this by noticing when the number of supported modifiers is 0 and
returning early.
Replace one more open-coded pixel format translation map with a call to our
central pixel format database, reducing duplication of format information.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
No caller ever used anything but NULL here, so just use NULL to simplify code.
In fact, no EGL platform defined today even defines any platform attributes
except the X11 platform for choosing a non-default SCREEN.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This became unused in:
commit e77f8ad79b
Author: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Date: Wed Jun 8 17:39:37 2016 +0300
compositor-fbdev: drop EGL support
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
For supporting output layout, compositors need the ability to manually set the
'weston_output' by 'weston_output_move'.
Signed-off-by: sichem <sichem.zh@gmail.com>
Currently, a check is missing for the case if the HDCP Content Type
property is requested, but is not supported by the driver.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
In case of enforced protection mode, the renderer takes care of
censoring the protected content when the output recording is going on.
But in case of relaxed protection mode, the client must be notified to
avoid showing the protected content, if the output recording is on.
This patch handles the case, where the content-protection is enabled
with relaxed protection mode, and notifies the client, whenever the
recording is started or stopped.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Contents on an ouput are captured when screenshooter/recorder/screen
sharing is enabled. In such cases the protected content must
be censored to ensure that it is not recorded along with unprotected
content. This is a required only when the surface protection is in
enforced mode.
Signed-off-by: Harish Krupo <harishkrupo@gmail.com>
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Currently, the idle task for updating surface protection is scheduled
in case of change in the output mask of a surface or in case of change
in protection status of an output.
This patch adds a function for reusing the code to schedule the
idle-tasks, that can be called whenever there is a chance of a change
in the protection status of a surface.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
The member disable_planes of weston_output signifies the recording
status of the output, and is incremented and decremented from various
places. This patch provides helper functions to increment and decrement
the counter. These functions can then be used to do processing, before
and after the recording has started or stopped.
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Currently drm-layer supports HDCP1.4 using connector property:
Content Protection. This property if available for a platform, can be
read and set for requesting content-protection.
Also, the patch series [1] adds HDCP2.2 support in drm, and patch [2]
adds support to send udev events for change in connector properties,
made by the kernel.
This patch adds these HDCP connector properties in weston, and exposes
the content-protection support to the client for drm-backend.
It adds the enums to represent 'Content Protection' and 'Content Type'
connector properties exposed by drm layer. It adds a member
'protection' in drm_output_state, to store the desired protection
from the weston_output in the drm-backend output-repaint cycle. This
is then used to write the HDCP connector properties for the drm_heads
attached to the drm_output.
The kernel sends uevents to the user-space for any change made by it
in the "Content Protection" connector property. No event is sent in
case of change in the property made by the user-space.
It means, when there is a change of the property value from "DESIRED"
to "ENABLE" i.e. successful authentication by the kernel, a uevent
will be generated, but in case of userspace requesting for disabling
the protection by writing "UNDESIRED" into the property, no uevent
will be generated.
This patch also adds support for handling new udev events for HDCP
connector property changes. Any such change, triggers change in the
weston_head's current_protection.
[1] https://patchwork.freedesktop.org/series/57233/#rev7
[2] https://patchwork.freedesktop.org/patch/303903/?series=57233&rev=7
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
62626cbfec ensures that the GL render will not render a view's content
to the screen when the surface has requested a higher content-protection
level than the output currently offers.
When the HDCP MR was split into the core content-protection support in !83
and specific DRM support for HDCP in !48 (not yet landed), this opened a
hole where the DRM backend could promote a view to a hardware plane,
even if the output offered a lower protection level than the surface
wanted to enforce.
In the DRM backend, check the desired protection level, and refuse to
promote the view to a hardware plane if the output does not offer
sufficient protection. This will lead to presentation falling back to
the renderer, which may censor the content, reduce quality, etc.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: 4b6e73d617 ("libweston: Add support to set content-protection for a weston_surface")
This was caused by weston_wm_handle_xfixes_selection_notify() calling
weston_seat_set_selection() with a NULL source, apparently only
sometimes when closing an Xwayland window.
Although we already supported minor version 2 of the explicit sync
protocol, we couldn't advertise it previously, since it was not in any
released version of wayland-protocols. With the release of
wayland-protocols 1.18, which includes minor version 2 of this protocol,
and the recent update in weston to require 1.18, we can now safely
advertise minor version 2.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Commit 4fc5dd0099 ("compositor: add capability CAPTURE_YFLIP")
introduced a capability flag which indicates whether y-flipping is
necessary. As already indicated in that commit message, it seems
that pixman flipps the y-axis only due to historic reasons.
Drop y-flipping and use the WESTON_CAP_CAPTURE_YFLIP flag to
indicate that y-flipping is not necessary. This simplifies code
and improves screen share performance (on my test by about 3% down
to 18% CPU load on the sharing instance of Weston).
Signed-off-by: Stefan Agner <stefan@agner.ch>
Adds initial grouping for sphinx/breathe for the logging/debugging
framework. We add a few groups: log (public API), internal-log (private API,
not exported) and debug-protocol, specific to the weston
debug protocol.
In latest version of breathe, '\memberof' command is recognized as such.
But it conflicts with '\ingroup' command and can't be used in the same
time (leading to duplicate symbols), so we follow a simple rule: object
tagging with '\ingroup' then use '\memberof' command for the functions
that work on that object.
There's also a caveat here: we have objects that are private (opaque)
but the functions are public. For those cases we resort to using
'internal-log' for the object (class) and 'log' for the functions.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
We have dedicated header for the internal parts of the logging
framework, use that for the set-up part instead of the libweston public
API header.
Further more this removes weston_vlog() from public header as well and
moves them to weston-log-internal.h file.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Like a black box in an airplane, the flight recorder can be used to
accumulate data and, when needed, to display its contents.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Avoids a potential dependency on the log scope being set-up before
actually creating the scope. Destroy part of the log context could
suffer from the same issue if the log scope is destroyed before.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Destroying the compositor after destroying the log scope will not print
out the messages in the tear down/clean-up phase of the compositor, so
add a new tear_down function which allows keeping a valid reference to
the compositor. This way we can destroy the compositor before destroying
the scope and keep the debug messages.
While at it remove the log context destroy part from the clean-up
of the compositor and make it stand on its own.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Pekka Paalanen