Refactor some of rdp.c into a header file.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
We've already allocated the listener by the time we hit this failure,
so we must exit through the path that frees it.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
In 913d7c15f7 stricter error checking was
introduced to the strtol call, which broke reading backlight values.
Since every sysfs backlight file ends with a newline.
As noted in a comment in the previous MR to prevent damaged pointers
after calling asprintf, replace every asprintf call with str_printf.
Previous-MR: https://gitlab.freedesktop.org/wayland/weston/-/merge_requests/543
Signed-off-by: Sören Meier <soerenmeier@livgood.ch>
The repaint_data is entirely backend specific. Moreover, it is only used by the
drm backend, while other backends ignore the repaint data.
There will always be only one repaint active, thus, there is no need to pass the
repaint data from the outside.
The repaint_data breaks with the multi-backend series, which calls repaint begin
for all backends to get the repaint_data. The repaint_data of the last backend
will then be passed to all other backend. At the moment, this works, because the
drm backend is the only backend that implements the begin_repaint call.
Another option would be to track the repaint data per backend in the compositor,
but actually, it the backend needs to track state across the calls, it's its own
responsibility.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
The pending_state is already stored in the backend and can be directly retrieved
from there.
This avoids involving the compositor in passing state between the repaint
phases for a single backend.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Fbdev backend was deprecated in the Weston 10.0.0 release with
6338dbd581. Before that, I suggested
already in 2019 to remove it, but it was too soon then. Now it seems the
final voices asking for fbdev to be kept have been satisfied, see the
linked issue.
Fbdev-backend uses a kernel graphics UAPI (fbdev) which is sub-par for a
Wayland compositor: you cannot do GPU accelerated graphics in any
reasonable way, no hotplug support, multi-output support is tedious, and
so on. Most importantly, Linux has deprecated fbdev a long time ago due
to the UAPI fitting modern systems and use cases very poorly, but cannot
get rid of it if any users remain. Let's do here what we can to reduce
fbdev usage.
I am doing color management related additions to libweston which require
adding checks to every backend. One backend less is less churn to write
and review.
Libweston major version has already been bumped to 11, so the next
release will be Weston 11, without fbdev. enum weston_compositor_backend
entries change their numerical values.
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/581
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
These are supported by some other compositors already.
Add them to the list so `weston-simple-dmabuf-feedback`
reports them correctly.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
The built-in backend of libseat requires users to enable a logging
level in order for libseat to start writing out log messages. For that
to happen we split out the info and error log level messages into the
compositor's log scope, while debug level messages go into a dedicated
scope.
With that, this patch brings in a new scope, called libseat-debug, which
users need to explicity create a subscription for it as to retrieve/have
access to debug message coming out of libseat. Note that by default we
have a subscription for the log-scope so any errors/info from libseat
would be displayed to the user.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Otherwise, the client will assume that dragging is in progress and remains in
that state forever.
This can happen when weston processes the mouse up event just before the
start_drag() arrives.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
This doesn't work with any of the launchers we've kept. Remove the option
and all the bits that handle it.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Moving forward we're going to be supporting libseat and logind as our
only launchers. We're doing this to reduce our maintenance burden,
and security impact.
Libseat supports all our existing use cases, and seatd can replace
weston-launch so we no longer have to carry a setuid-root program.
This patch removes weston-launch, and launcher-direct, leaving only
libseat and logind.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Fix a typo. No CM functional change, just redirect LCMS error
into created cmsContext which output into weston log.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
This is probably the simplest case to demonstrate how to use
WESTON_EXPORT_FOR_TESTS.
Previously, vertex-clip test re-built vertex-clipping.c for itself. Now
it directly links in gl-renderer.so instead as that is where
vexter-clipping.c gets built into for actual use. This probably will not
work for any installed program, but luckily tests are never installed,
so Meson makes sure the DSO is found.
Unfortunately we cannot remove the definition of dep_vertex_clipping
yet, because clients/cliptest.c needs it.
This makes vertex-clip test depend on GL-renderer, but that is where the
code is really used.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Although weston_compositor_run_key_binding() is called when the current
keyboard grab is default_grab or input_method_grab, swallowing the key
event is processed only on default_grab. As a result key events that
should be swallowed are sent to the input method unexpectedly.
For example, when a user press `Super + s` on weston-editor to take a
screen shot, `s` will be unexpectedly entered to the text area.
I confirmed such behaviour with weston-simple-im and fcitx5-5.0.10.
It doesn't occur with weston-keyboard because it doesn't install
keyboard grab.
Signed-off-by: Takuro Ashie <ashie@clear-code.com>
Use 3D LUT for color mapping.
For category CMLCMS_CATEGORY_INPUT_TO_BLEND use transform which has
3 profiles: input, output and light linearizing transfer function.
For category CMLCMS_CATEGORY_INPUT_TO_OUTPUT use input and output profiles +VCGT.
For category CMLCMS_CATEGORY_BLEND_TO_OUTPUT use output inverse EOTF + VCGT.
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Graeme sketched a linearization method there:
https://lists.freedesktop.org/archives/wayland-devel/2019-March/040171.html
Sebastian prototyped there:
https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/14/commits
Thanks to Pekka for great simplifications in implementation, like the xyz_dot_prod()
Quote: "should help untangle lots of the multiplications and summations by saying
we are computing dot products, etc".
The approach was validated using matrix-shaper and cLUT type of profiles.
If profile is matrix-shaper type then an optimization is applied.
The extracted EOTF is inverted and concatenated with VCGT, if it is availible.
Introduce function cmlcms_reasonable_1D_points which would be shared between
linearization method and number of points in 1DLUT for the transform.
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Co-authored-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Add to search parameter cmlcms_category, input and output profiles,
and render intent for output which would be used for both profiles.
Add common function setup_search_param for every category.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
The stock profile would be used when client or output
do not provide any profile or unaware of color management.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
1. The cmlcms_category is used to identify the purpose of transform:
- CMLCMS_CATEGORY_INPUT_TO_BLEND
- CMLCMS_CATEGORY_BLEND_TO_OUTPUT
- CMLCMS_CATEGORY_INPUT_TO_OUTPUT
2. Added following fields to cmlcms_color_profile:
- output_eotf - If the profile does support being an output profile and it
is used as an output then this field represents a light linearizing
transfer function and it can not be null. The field is null only if
the profile is not usable as an output profile. The field is set when
cmlcms_color_profile is created.
- vcgt - VCGT tag cached from output profile, it could be null if not exist
- output_inv_eotf_vcgt - if the profile does support being an output profile and it
is used as an output then this field represents a concatenation of inverse
EOTF + VCGT, if the tag exists and it can not be null.
3. Added field cmsHTRANSFORM to cmlcms_color_transform.
It is used to store LCMS optimized pipeline.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
The following GL extensions provide support for shaders CM:
-GL_OES_texture_float_linear makes GL_RGB32F linear filterable.
-GL ES 3.0 provides Texture3D support in GL API.
-GL_OES_texture_3D provides sampler3D support in ESSL 1.00.
If abovesaid is supported then renderer sets flag WESTON_CAP_COLOR_OPS
which means that all fields in struct weston_color_transform are
supported, for example, 1DLUT and 3DLUT.
Use GL_OES_texture_3D to implement 3DLUT function which
uses trilinear interpolation for pixel processing or bypass as is.
Quote from https://nick-shaw.github.io/cinematiccolor/luts-and-transforms.html
"3D LUTs have long been embraced by color scientists and are one of
the tools commonly used for gamut mapping. In fact, 3D LUTs are used
within ICC profiles to model the complex device behaviors necessary
for accurate color image reproduction".
Quote from https://developer.nvidia.com/gpugems/gpugems2/part-iii-high-quality-rendering/
chapter-24-using-lookup-tables-accelerate-color
is about interpolation: "By generating intermediate results based
on a weighted average of the eight corners of the bounding cube,
this algorithm is typically sufficient for color processing,
and it is implemented in graphics hardware".
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Introduce shader color mapping identity and 3D LUT.
Shader requirements struct uses union for color mapping
to prepare the place for 3x3 matrix.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Introduce 3D LUT definition as part of Weston
color transform struct. A 3D LUT is a LUT containing
entries for each possible RGB triplets.
Co-authored-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
We can end in `subsurface_committed()` in different scenarios
without the surface having an attached buffer. While setting
the mapped state to `true` in that case doesn't matter for
that (sub)surface itself, it triggers its own child subsurfaces
to get mapped when they shouldn't.
Closes https://gitlab.freedesktop.org/wayland/weston/-/issues/426
Signed-off-by: Robert Mader <robert.mader@collabora.com>
Many years ago (2014) systemd-logind was brought into libsystemd.
We've supported old versions of systemd-logind ever since.
Let's remove support for old versions of systemd-logind before the
merge for a tiny code simplification.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Zoom is a neat trick, but in its current form it's very hard to test
and maintain.
It also causes output damage to scale outside of the output's boundaries,
which leads to an extra clipping step that's only necessary when zoom
is enabled.
Remove it to simplify desktop-shell and compositor.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
The spec states:
> Because buffer transformation changes and damage requests may be
> interleaved in the protocol stream, it is impossible to determine
> the actual mapping between surface and buffer damage until
> wl_surface.commit time. Therefore, compositors wishing to take both
> kinds of damage into account will have to accumulate damage from the
> two requests separately and only transform from one to the other after
> receiving the wl_surface.commit.
For subsurfaces in sync mode, arguably the same is the case until the
cached state gets applied eventually. Thus, in order to keep complexity
to a sane level, just accumulate buffer damage and convert it only
when the cached state gets applied.
This mirrors how other compositors like Mutter implement cached damage
and what the spec arguably should demand.
Closes https://gitlab.freedesktop.org/wayland/weston/-/issues/446
Signed-off-by: Robert Mader <robert.mader@collabora.com>
These formats are useful because they are often easier to produce
on CPU than half-float formats, and abgr16161616 has both >= 10bpc
color channels and adequate alpha, unlike abgr2101010.
The 16-bpc textures created from buffers with these formats require
the GL_EXT_texture_norm16 extension.
As WL_SHM_FORMAT_ABGR16161616 was introduced in libwayland 1.20,
update Weston's build requirements and CI.
The formats also needed to be registered in the pixel format table,
and defined in a fallback path if recent libdrm is not available.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
Specifically log if there were no suitable planes for us to use, or if
we tried to place it on a plane but were told no by the kernel.
Signed-off-by: Daniel Stone <daniels@collabora.com>
There's no real reason for these to be separate now that the eligibility
checks have been moved up so we don't call them unless it makes sense.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We just copy the SHM buffer straight into a separately-allocated GBM BO,
so no need to take a reference on the buffer itself or keep it from
being released.
All drm_output_try_view_on_plane really does at this point is to call
the prepare_*_view function for the requisite plane type, and take a ref
on the weston_buffer from the client. Given that we don't need to keep
the client buffer alive, we can short-circuit
drm_output_try_view_on_plane, and instead just call
drm_output_prepare_cursor_view directly when we have a cursor plane.
This also makes it easier to just remove drm_output_try_view_on_plane in
following patches when we merge the overlay/scanout plane path into one.
Doing so gives us two clearly-separated paths: one for copying a SHM
client buffer into a cursor, and another for directly scanning out
client content.
Signed-off-by: Daniel Stone <daniels@collabora.com>
At some point this got hobbled, such that NO_PLANES and
NO_PLANES_ACCEPTED became the same thing, so we can just check if the
returned plane_state is NULL or not.
Signed-off-by: Daniel Stone <daniels@collabora.com>
For views which cover the entire output, we always attempt to place them
on the primary plane, to avoid a situation where we place a fullscreen
view into an overlay plane and then have to disable the primary plane,
which doesn't always work.
Move this check earlier, so we don't consider overlay planes to be
candidates for fullscreen views. This check should be changed in future
to only filter for opaque views, but that's for another time.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We shouldn't get down into trying to place a view on a cursor plane if
these checks are not met, so change them to asserts rather than early
returns.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we introduced support for variable zpos, we did so by filtering the
list of acceptable planes and then creating a separate zpos-ordered
list. Now that the planes are already zpos-sorted in the backend list,
and we have more early filtering, we can replace this with a single
plane-list walk.
Signed-off-by: Daniel Stone <daniels@collabora.com>
For better or worse, cursor planes can only be used by uploaded SHM
buffers right now, so ignore them when we're calculating the acceptable
plane mask for client dmabufs.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If we're in renderer-only mode, we can only use the renderer and the
cursor plane. Don't even try to import client buffers as it makes no
sense.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If we have a SHM buffer, it can only go into a cursor plane - and only
then if it's of the right format.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Each output is hardcoded to the use of a single 'special' (primary or
cursor) plane; make sure we don't try to steal them from other outputs
which might not be happy to discover that we've taken it off them.
Signed-off-by: Daniel Stone <daniels@collabora.com>
GBM is how we import all our client content into DRM FBs, so don't try
anything other than renderer-only without it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
It's possible to write this with a few less twisty special cases. Tested
manually with a randomly-distributed input tree as well as manually
trying to hit special cases around first/last entries.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This ensures that users that previously set the option explicitly will also have
a chance to notice the deprecation.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
weston-launch will be removed in a future release as this feature has
been offloaded to libseat and seatd-launch. Print an early deprecation
warning to give existing users time to migrate.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Transforming the scanout damage by the zoom will result in rectangles
outside of the display, and some with negative co-ordinates. This makes
at least some drivers unhappy (tested on vmware), and the page flip fails,
and weston hangs indefinitely.
Clip the damage to the output so we don't fall down.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Rename the build option to "deprecated-backend-fbdev" so that a
previously configured build dir doesn't retain the old setting.
This is consistent with the existing "deprecated-wl-shell" option.
Make the option default to "false".
Print a warning when fbdev is force-enabled.
Signed-off-by: Simon Ser <contact@emersion.fr>
References: https://gitlab.freedesktop.org/wayland/weston/-/issues/581
The invariant is clearly documented in code comments, but the code
failed to ensure it in all cases. Fix it.
There is one very specific protocol sequence triggered by a development
version of the Wine Wayland driver when Chrome (win64 app) is switched
from window to fullscreen and then back by pressing F11 key. The switch
back triggered
weston: ../libweston/color.c:217: weston_paint_node_ensure_color_transform: Assertion 'it->surf_xform_valid == false' failed
For some reason, that specific protocol sequence causes
weston_compositor_build_view_list() to create a transient second view
for a sub-surface. In the Chrome traces, I have seen that happen twice
per run. The first time it works, the old view gets immediately
destroyed. The second time (during un-fullscreening) a new transient
view is create and then it fails the invariant check.
The fix is in weston_paint_node_create() which is supposed to ensure the
invariant. However, it went through the (new) view's paint node list,
which will not contain paint nodes from other views. In hindsight this
is an obvious bug, but perhaps all views having exactly one associated
surface each somehow confused the author. Since the invariant is about
surface+output, go through the surface's paint node list instead. That
list contains all the relevant paint nodes by definition.
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/568
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Commit 0e4f097d broke opaque regions, and since then weston will waste
time rendering occluded areas.
I think this is because we're taking the intersection of the opaque
and scissor regions even when the scissor region isn't enabled.
An easy test is to turn on triangle fan debugging with the gl renderer,
then run weston-simple-damage and move another opaque application such as
weston-terminal over it.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Leak found running drm-smoke-test with ASan.
Do not forget to free the launcher before returning when we can't open
the launcher fd. Also, just set 'out = launcher' after all error paths,
otherwise we give the caller a stale pointer.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
weston_touch_destroy(), which is called from weston_seat_release(),
asserts that all its touch devices have been destroyed. The Wayland
backend currently destroys the touch devices ... immediately after
calling weston_seat_release().
Invert the ordering so that touch devices are destroyed first and we
don't trip over the assert.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When EGL initialization fails (failure to create a GLES3 or GLES2
context) we will end up calling gbm_device_destroy() twice, once
in init_egl() and once in the drm_backend_create() error path.
Given that we should also take care of properly destroying the gbm
device when we don't have any inputs for instance, mark the gbm device
as NULL to avoid calling gbm_device_destroy() once more when destroying
the DRM-backend.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Replaces potential corruption signal emit call sites with the more safer
weston_signal_emit_mutable().
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This uses the more safer version of signal emission to avoid a potential
crash when the output is destroyed that will follow a surface/view
destruction for which it has a listener attached (to the output_destroy
signal).
Fixes: #734
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This avoids crashes due to removal of notification listeners from within
invocations of other listener callbacks in the same signal emission.
Fixes: #415
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Walking the format/modifier list to try to find out if our FB is
compatible with the plane is surprisingly expensive. Since the plane's
capabilities are static over the lifetime of the KMS device, cache the
set of planes for which the FB is theoretically
format/modifier-compatible when it's created, and use that to do an
early cull of the set of acceptable planes.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we first create a drm_fb from a weston_buffer, cache it and keep it
alive as long as the buffer lives. This allows us to reuse the gbm_bo
and kernel-side DRM framebuffer, rather than constantly creating and
destroying them at every repaint. The overhead of doing so (e.g. MMU
updates) can be significant on some platforms.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently each drm_fb takes a reference on a client buffer it wraps.
This prevents us from being able to reuse a drm_fb in multiple places
(e.g. two views of the same client buffer) simultaneously, or even back
to back.
Move the buffer reference to the plane state, as preparation for
allowing drm_fb to be cached inside the weston_buffer.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Currently we take a reference on the underlying client buffer every time
we materialise a drm_fb from a view, and release it when the drm_fb is
destroyed. This means that we need to create and destroy a drm_fb every
time we want to use it, which is pathologically unperformant on some
platforms.
To start working towards being able to cache drm_fb, only take the
reference when we apply it to a plane state.
Signed-off-by: Daniel Stone <daniels@collabora.com>
No sense walking the plane list every frame if we can't use it because
it's neither a SHM buffer nor a client buffer we can directly import as
a framebuffer.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If we still have a pending idle timer when the compositor is being
destroyed, make sure to free it first.
Signed-off-by: Daniel Stone <daniels@collabora.com>
EGLNativeWindowType can be a lot of different things, including a
pointer which an XID is not. Explicitly cast it through uintptr_t so we
don't throw build warnings either way.
Signed-off-by: Daniel Stone <daniels@collabora.com>
In commit "libweston: add initial dma-buf feedback implementation" we've
added initial support to dma-buf feedback, but it was not using the
feedback from DRM-backend to add useful per-surface feedback.
In this patch we add this. The scanout tranche of the per-surface
feedback is based on the union of formats/modifiers of the primary and
overlay planes available. These are intersected with the
formats/modifiers supported by the renderer device.
Also, it's important to mention that the scene can change a lot and we
can't predict much. So this patch also adds hysteresis to the dma-buf
feedback. We wait a few seconds to be sure that we reached stability
before adding or removing the scanout tranche from dma-buf feedback and
resending them. This help us to avoid spamming clients and leading to
unnecessary buffer reallocations on their end.
Here's an example of what we want to avoid:
1. We detect that a view was not placed in a plane only because its
format is not supported by the plane, so we add the scanout tranche
to the feedback and send the events.
2. A few milliseconds after, the view gets occluded. So now the view
can't be placed in a plane anymore. We need to remove the scanout
tranche and resend the feedback with formats/modifiers optimal for
the renderer device. The client will then reallocate its buffers.
3. A few milliseconds after, the view that was causing the occlusion
gets minimized. So we got back to the first situation, in which the
format of the view is not compatible with the plane. Then we need to
add a scanout tranche and resend the feedback...
This patch is based on previous work of Scott Anderson (@ascent).
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add enum try_view_on_plane_failure_reasons to help us to keep track of
the reason why promoting view to a plane failed. We also add a variable
to struct weston_paint_node so that we can update this information in
each output repaint.
This will be used in the next commits, in which we add proper surface
dma-buf feedback support.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This adds the initial dma-buf feedback implementation, following the
changes in the dma-buf protocol extension.
The initial dma-buf feedback implementation gives support to send
default feedback and per-surface feedback. For now the per-surface
feedback support is very basic and is still not implemented in the
DRM-backend, what basically means that KMS plane's formats/modifiers are
not being exposed to clients. In the next commits of this series we add
the DRM-backend implementation.
This patch is based on previous work of Scott Anderson (@ascent).
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
This just documents why we can be sure that
renderer->get_supported_formats() is set in bind_linux_dmabuf().
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
It simply returns the number of format/modifier pairs in the array. This
will be useful for the next commits, in which we add support for dma-buf
feedback.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add function to query the DRM device given an EGLDisplay. It is the
device being used by the compositor to perform composition.
This will be useful in the next commits of this series, where we add
support for dma-buf feedback.
Signed-off-by: Scott Anderson <scott.anderson@collabora.com>
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Errors happening to devices being added or removed shouldn't fail
silently so exit if any of that happens.
Sprinkle some debug logs for other cases as well.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Add API to set an output's color profile. This new function can also be
called while the output is enabled. This allows changing the output
color profile even at runtime if desired.
color-noop has no way of creating weston_color_profile objects, so it
just asserts that no color profile is set.
color-lcms does not yet implement taking the output color profile into
account, so for now it just fails everything if a profile is set.
weston_surface_color_transform_fini() was previously used only prior to
freeing the struct, but now it is used also to just clear the struct,
hence it needs to reset the fields.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Move the code into a new function that either succeeds in setting all
the color transformations or does not change anything. This will be
useful when implementing output color profiles changes while the output
is enabled.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This function will be useful for Weston to load output ICC profiles from
weston.ini.
Co-authored-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Roughly speaking, a color profile describes the color space of content
or an output. Under the hood, the description includes one or more ways
to map colors between the profile space and some standard profile
connecting space (PCS).
This object is not called a color space. A color space has a unique
definition, while a color profile may contain multiple different
mappings depending on render intent. Some of these mappings may be
subjective, with an artistic touch.
When a source color profile and a destination color profile are combined
under a specific render intent, they produce a color transformation.
Color transformations are already preresented by weston_color_transform.
This patch adds the basic API for color profile objects. Everything
worthwhile of these objects is implemented in the color managers:
color-noop never creates these, and in color-lcms they are basically a
container for cmsHPROFILE, the Little CMS object for color profiles.
Color profile objects will not be interpreted outside of the color
managers, unlike color transformations.
For a start, the color manager API has one function to create color
profiles: from ICC profile data. More creation functions for other
sources will be added later.
The API has errmsg return parameter for error messages. These are not
simply weston_log()'d, because CM&HDR protocol will allow clients to
trigger errors and the protocol handles that gracefully. Therefore
instead of flooding the compositor logs, the error messages will
probably need to be relayed back to clients.
Color-lcms is expected to create a cmsHPROFILE for all kinds of color
profiles, not just for those created from ICC profile data. Hence,
color-lcms will fingerprint color profiles by the MD5 hash which Little
CMS computes for us. The fingerprint is used for de-duplication: instead
of creating copies, reference existing color profiles.
This code is very much based on Sebastian Wick's earlier work on Weston
color management, but structured and named differently.
Co-authored-by: Sebastian Wick <sebastian@sebastianwick.net>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
These formats will be eventually be useful for color managed clients
using wl_shm that wish to submit buffers encoding high dynamic range
images.
While the minimum requirement for linearly filterable half float
textures is GL ES 2.0 + GL_OES_texture_half_float_linear, to keep
the code simple, this commit only enables the new formats when
the requirements for color management (notably including GL ES 3.0
and GL_EXT_color_buffer_half_float) are available.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
This fixes the tear-down and the destroying part in case RDP back-end
couldn't be initialized. The first issue is the rdp_output which will
not be created in some circumstances (can't open the socket for
instance) and requires a guard check, and secondly, the
rdp_head being created above of that, wasn't removed and tripped an
assert when destroying the compositor instance.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Adding these formats makes it possible for clients using wl_shm to
submit buffers with 10 bits per pixel, and thus (if Weston is
configured with an xrgb2101010 frame buffer) display more precise
colors on some computer monitors.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
The struct wayland_input objects tracking the outer compositor's
wl_seats are now properly destroyed when the wayland backend is.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
The wl_display_roundtrip call was originally introduced to let the
display_add_seat function wait until a wl_seat.name event was received.
This change replaces the wl_display_roundtrip call with an
asynchronous, nonrecursive equivalent. Now a wl_display.sync callback
is used to delay the final steps of adding a seat until one protocol
roundtrip has occured/the name has been received.
Signed-off-by: Manuel Stoeckl <code@mstoeckl.com>
My reading of the GL spec is that a dmabuf becomes a sibling to the
EGLImage created from it, and that all updates to the dmabuf will be
propagated to the EGLImage.
A rebind is still required every time the dmabuf content changes,
but this should be satisfied by gl_renderer_attach(), which does
a rebind when the buffer is commit.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
So, turns out the GL implementation is allowed to destroy EGLImage
sources if this isn't set. Apparently none we've ever been tested on do
this, but it looks like we should be setting this anyway.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
