Currently dbus support is built when launcher-logind option
is set; let's split that such that dbus is its own option
and launcher-logind depends on dbus.
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Currently the dbus helper stuff is internal only in libweston,
let's move it to being public so that custom shells may use
the helper code.
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
The primary_plane is currently shared amongst all outputs, and is the last
barrier to having overlapping outputs.
Split it up and make it per output instead.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We're going to move primary planes from compositor to output, so we need
struct weston_plane to precede struct weston_output.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Remove plane->damage and instead accumulate damage on paint
nodes.
This is a step towards allowing multiple overlapping outputs.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Tracking the view's plane in the paint node in this way is a step towards
inflicting plane damage from paint node update during the output repaint,
instead of manually doing weston_view_damage_below().
We remove view->plane entirely and do all access through pnodes.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Later, we'll want to use the visible region for damage tracking in
paint_nodes. For now, we can use it in the renderers where they've been
calculating it independently to draw paint nodes.
We still can't remove view->clip entirely, because
weston_view_damage_below() may be called before the first render of
a view, when its visible region hasn't been calculated yet. The
clip is empty at that point, which allows weston_view_damage_below()
to "work".
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
In the future we'd like to have multiple overlapping outputs.
weston_output_damage() currently adds damage to the output's coordinates
on the primary plane. This plane is shared between all outputs, so it
would result in damaging more than the intended output.
Eventually, plane damage will go away and be replaced by paint node damage,
and damaging the entire output would involve adding damage to a list of
paint nodes.
Instead, use a flag to indicate the output must be fully redrawn, and add
the damage during the repaint loop.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Most of the time when we're changing things about views, we don't need
to throw away the view list and rebuild it from scratch. The only times
when we need to do this are when views have been added to or removed
from the scene graph, or have been restacked within it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
There's no need to go through and rebuild the subsurface list every
time. In addition to being unnecessary work, it complicates things like
damage tracking.
Track a new surface dirty status indicating that the subsurface tree has
changed in some way, and only rebuild subsurface stacking when this has
occurred.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This indicates that more than just the content changing, the form of the
buffer has changed in a way which may not be like-for-like to the
previous buffer but require significant reinterpretation. Examples
include the format, opacity, colour state, etc.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Instead of having a bool for whether or not a buffer has been attached
in this commit cycle, use a status bitmask.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Preserve the same order as desktop-shell for handling view (un)mapping,
so we can move these into a shared helper. These should have no
functional effect but provide a helpful bisect point.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Akin to the paint_node_status we already have, start also tracking a
surface dirty status. This will allow us to minimise the updates we need
to make.
Currently this is only collected, with no functional change made.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Remove all handling of process/PID internals from libweston's Xwayland
launcher, and keep this only in the frontend. libweston now only sees
the wl_client and nothing else.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Until now we've only had the unadorned arithmetic functions, but they're
easy to abuse and tedious to use.
For now, we just add weston_coord_global_add/sub functions and use them
where appropriate.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This is stored as an unadorned weston_coord internally, but with getter
functions we can put together the appropriate global or surface
coordinate.
Use them where appropriate.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Truncating a weston coord to integer values is something we do
frequently enough to warrant a helper function.
Use this in the kiosk and desktop shells where appropriate.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This adds three new helpers: one to iterate over all debug scopes
created/added and other two are for simpler getters for the scope name
and the description.
Included with this change is also a simple test to retrieve them.
This is an alternative to using the debug scope list advertised when
using the weston-debug private extension. libweston users can use this
directly to know which scopes they can subscribe to, and there's no need
to have a client implementation for the weston-debug protocol.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This will be used to let know the constraints code that the reason for
activation is that the client has requested to set the surface to fullscreen.
Signed-off-by: Sergio Gómez <sergio.g.delreal@gmail.com>
Since we want to pass the view to the surface activation listener inside the
constraints code, and the surface is reachable from the view anyway.
The flags field will let us pass the reason for activation to the constraints
code, which will then handle especially the fullscreen case.
Signed-off-by: Sergio Gómez <sergio.g.delreal@gmail.com>
Pass the backend instead of the compositor to the PipeWire output API
create_head() method and increment the API version.
That way the backend will not have to find the backend pointer from the
compositor. This is trivial now, but in the multi-backend case would
entail iterating over all backends to find the correct one.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a separate PipeWire backend based on the PipeWire plugin. The backend
requires PipeWire 0.3.x.
The PipeWire backend can be used as a standalone-backend backend for streaming
and composing Wayland clients to PipeWire.
The backend supports the on-demand creation of heads via the
weston_pipewire_output_api_v1. It also supports per-output pixel format
configuration via a gbm-format option.
Multiple PipeWire outputs can be created by setting the num-outputs option in
the [pipewire] section.
Co-authored-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Pass the backend instead of the compositor to the windowed output API
create_head() method and increment the API version.
That way the backend will not have to find the backend pointer from the
compositor. This is trivial now, but in the multi-backend case would
entail iterating over all backends to find the correct one.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
For some reason we'd managed to have a mismatching header prototype and
implementation. Fix this up to consistently use enums everywhere.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Based on patches from:
Peter Hutterer <peter.hutterer@who-t.net>
Lyude Paul <thatslyude@gmail.com>
Bastian Farkas <bfarkas@de.adit-jv.com>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
When it comes to a window frame, a tablet tool and cursor act almost
identical; they click things, drag things, etc. The tool type and extra
axes don't serve any use in the context of a window frame, so tablet
pointers share the frame_pointer structures used for the mouse pointer.
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lyude Paul <thatslyude@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Bastian Farkas <bfarkas@de.adit-jv.com>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
The tablet is given a separate cursor. Most tablet interaction is an absolute
interaction and shouldn't need a cursor at all, but usually the cursor is used
to indicate the type of virtual tool currently assigned.
Based on patches from
Peter Hutterer <peter.hutterer@who-t.net>
Lyude Paul <thatslyude@gmail.com>
Bastian Farkas <bfarkas@de.adit-jv.com>
Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Based on a patches from
Peter Hutterer <peter.hutterer@who-t.net>
Lyude Paul <thatslyude@gmail.com>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Based on a patch from
Peter Hutterer <peter.hutterer@who-t.net>
Lyude Paul <thatslyude@gmail.com>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Closely modelled after the pointer focus handling
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lyude Paul <thatslyude@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Bastian Farkas <bfarkas@de.adit-jv.com>
Based on a patch from
Peter Hutterer <peter.hutterer@who-t.net>
Lyude Paul <thatslyude@gmail.com>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Introduces three new structs, weston_tablet and weston_tablet_tool for the
respective devices, with the respective information as it's used on the protocol.
And weston_tablet_tool_id to track the tools of a tablet.
Note that tools are independent of tablets, many tools can be used across
multiple tablets.
The nesting on the protocol level requires a global tablet manager, a tablet
seat nested into weston_seat. The list of tablets and tools are also part of
the weston_seat.
Most functions are stubs except for the actual tablet and tablet tool
creation and removal.
This is based on patches from Peter Hutterer <peter.hutterer@who-t.net> and
Bastian Farkas <bfarkas@de.adit-jv.com>.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Popups should have keyboard focus when active, but the toplevel window
should still appear "active". Make sure this is the case by changing the
"active" tracking to see whether any child surface has keyboard focus.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
