We don't accumulate log scopes with was previous set internally so
enable the "log" scope (explicitly) for the xwayland-test to see what
Weston prints out.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
We're still timing out with our basic xwayland test in CI, so this
enables the XWM logging scope, and enables some further print debugs we
have available in our helper library, in an attempt to further
investigate and determine why we're still timing out.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This adds a test to ensure that the DRM-backend writeback screenshooter
is working properly.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This patch introduces a small library wrapper around XCB to be used in
Xwayland tests.
It's being designed such that we do not advance without accounting for
all X11 events when changing the window state. It adds a fence that
waits for all events to be processed, and only after all the events have
been accounted for, to proceed further, resuming execution of the
tests.
This works by keeping a tentative_state list for the client and a
window state that gets applied when the event we waited for has been
received.
This is useful in test clients, which could verify at the end after
receiving all events that the correct state has been applied. Acts as a
way to verify that the we never get or have a different state than the
one we expect.
With it, this converts test-xwayland to using libxcb (together with
xcb-cursor-dev) rather than using Xlib, and with it it removes any Xlib
dependency we might have in the tests.
This only adds support for map/unmap/create/destroy/property notify.
A follow-up would be to expand this library to track window movement
and resizing.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
I also snuck in a trivial change to drag_surface_configure at the same
time to avoid yet another micro patch.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Convert the bare x,y coordinates into struct weston_coord and update all
users.
We keep the surface position in wl_fixed_t for now so it still exactly
matches the position most recently sent to clients.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Push weston_coord into the notification functions instead of passing
two doubles.
The touch handlers are passed a pointer to a weston_coord, which is
unusual. This is done so we can pass a NULL pointer instead of a
fabricated invalid coordinate when the touch type is TOUCH_UP.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Wayland protocol can't do this, but the way our test protocol handles
touch through a single event can - ensure that we don't by accident.
This will matter more shortly when we add assert()s to prevent having
coordinates with WL_TOUCH_UP events internally later.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Remove the independent x, y floats from the clipping code and replace them
with struct weston_cord. This includes the polygon8 structure as well.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We're pushing more and more mutable state into paint nodes, but this state
has a non-zero cost to rebuild every render.
Let's take care to track when we need to rebuild the state.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Update users of the old coordinate space conversion functions that take
x, y pairs to the new weston_coord versions.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
In case we have multiple outputs let's us choose the first output,
rather use the last one, which would happen when multiple are present in
the system.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
In preparation of having multiple outputs available we should be able to
specify by its name. We just use the default one if none was set-up at all.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Now that enum weston_renderer_type is public, there is no need for a
local enum renderer_type in the tests.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add an output transform function that doesn't use matrices so we can
test our matrix generation by applying it to vectors and comparing with
the non-matrix variant.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Rather than reinventing --use-pixman and --use-gl throughout each
backend, just have a common --renderer=foo argument which can be used to
explicitly specify the renderer.
The old arguments are still handled for backwards compatibility.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Instead of passing --shell=foo-shell.so, just pass --shell=foo, whilst
accepting the old form for compatibility.
Whilst we're at it, document the --shell argument in the manpage and
README.
Signed-off-by: Daniel Stone <daniels@collabora.com>
These shell utils functions are potentially useful to other shells as
well, so make them widely available.
Renamed all functions to weston_shell_utils namespace.
No functional change, copied ad litteram.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
We were storing the output description into the name field, which was
harmless but did cause a leak.
Signed-off-by: Daniel Stone <daniels@collabora.com>
While the --backend parameter looks like it takes a file name, it really
is selected from a list of supported strings that are then funneled
through a translation to enum weston_compositor_backend [1].
Because all backend parameters are of the form "...-backend.so", and
writing "--backend=...-backend.so" is boring, allow the --backend option
to match the backend name without "-backend.so" suffix instead.
For example, this allows to use "--backend=headless" instead of
"--backend=headless-backend.so".
Update help text and documentation. Keep the old way working for
backwards compatibility.
[1] 50dbf38514 ("libweston: use enum to choose the backend")
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Here are more tests for output decorations drawing, this time through
the color-lcms plugin. This is the only practical way to exercise the
input-to-output category of color transformations.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This adds a new test checking that output decorations (used in the
wayland-backend, here tested with headless-backend) are drawn correctly.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Only the 'image' field of struct buffer is ever used here, so just
pass pixman_image_t instead of struct buffer.
This allows a future test to mangle a screenshot (e.g. convert pixel
format) before feeding it in.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Migrate the tst suite to using the new screenshooting protocol. This
ensures the new protocol and implementation work, and removes a user of
the old protocol so that the old protocol can be removed in the future.
Now that the compositor chooses the pixel format,
capture_screenshot_of_output() needs to convert to the expected format
in the tests when necessary.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Instead of starting yet another hand-crafted pixel format mapping table,
use the one we have.
Following patches want to be able to create XRGB8888 buffers, and later
even other formats.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Add tests to validate that weston_matrix_to_transform() works properly
on the matrices generated by weston_surface_build_buffer_matrix() and
weston_output_update_matrix()
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
When we build up a matrix from a series of operations, it's very useful
to know if the combined operations still result in something that matches
a wl_output_transform.
This adds a function to test if a matrix leads to a standard output
transform, and returns the transform if it does.
Tests are provided that check if complex series of operations return
expected results - the weston_matrix_needs_filtering function is tested
at the same time.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
These have been in wayland a while back with version 1.20.0.
We also need to update the test client helper with this bump, as
those bind to version 4.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Spinning up the full desktop-shell is pointless overhead for most tests,
which don't need the full load.
Signed-off-by: Daniel Stone <daniels@collabora.com>
There's no need to spin up the full desktop-shell for the vast majority
of our tests. Rework them to use weston-test-desktop-shell, which is
more lightweight and sensible.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Not a functional change. The replacement of const
dump file to use suffix of appropriate sub tests
(sRGB->sRGB, sRGB->adobeRGB, etc).
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
With commit 'Move libweston-desktop into libweston' we've moved out
libweston-desktop DSO into libweston. Move also the header to
libweston/desktop.
This removes removes the libweston-desktop pc file and bumps libweston
major version to 12.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
This protocol allows clients to create single-pixel RGBA buffers. Now
that we have proper support for these buffers internally within Weston,
we can expose them to clients.
This bumps the build container version, as we now depend on
wayland-protocols v1.26.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Users like desktop-shell want to parse a provided string containing a
combination of environment and arg, e.g.: ENV=stuff /path/to/thing --good
Add support to custom-env for parsing this, with tests, so we can delete
the custom implementation inside desktop-shell.
Signed-off-by: Daniel Stone <daniels@collabora.com>
execve() takes the same form for arguments as environment: an array of
constant pointers to mutable strings, terminated by a NULL.
To make it easier for users who want to build up their own argument
strings to pass to execve, add support for argument arrays to custom_env.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Test the basic stuff: initialising from a known environment, setting a
new variable, overwriting a previous variable, and getting the resulting
array to pass to execve.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Setting up the arguments may consume some of the arguments, e.g. if we
provide a config file or extra modules, then the test harness is
expected to be responsible for freeing those arguments.
Checking the requirements and bailing first means that we never do that,
and thus skipped tests result in leaks. Flip the order so we set up the
args first and skip last, so we can consistently take ownership of all
the provided setup parameters.
Signed-off-by: Daniel Stone <daniels@collabora.com>
ZUC's default mode is to fork for every test case. Unfortunately on
AArch64, fork in an ASan-traced program usually takes around 3.6 entire
seconds. This was leading to the config-parser test timing out.
As none of our remaining ZUC tests even need to fork, just remove all
support for it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This commit is truly horrible.
We want to run ASan with leak checking enabled in CI so we can catch
memory leaks before they're introduced. This works well with Pixman, and
with NIR-only drivers like iris or Panfrost.
But when we run under llvmpipe - which we do under CI - we start failing
because:
- Mesa pulls in llvmpipe via dlopen
- llvmpipe pulls in LLVM itself via DT_NEEDED
- initialising LLVM's global type/etc systems performs thread-local
allocations
- llvmpipe can't free those allocations since the application might
also be using LLVM
- Weston stops using GL and destroys all GL objects, leading to Mesa
unloading llvmpipe like it should
- with everything disappearing from the process's vmap, ASan can no
longer keep track of still-reachable pointers
- tests fail because LLVM is 'leaking'
Usually, an alternative is to LD_PRELOAD a shim which overrides
dlclose() to be a no-op. This is not usable here, because when
$LD_PRELOAD is not empty and ASan is not first in it, ASan immediately
errors out. Prepending ASan doesn't work, because we run our tests
through Meson (which also invokes Ninja), leading to LSan exploding
over CPython and Ninja, which is not what we're interested in.
It would be possible to inject _both_ ASan and a dlclose-does-nothing
shim DSO into the LD_PRELOAD environment for every test, but that seems
even worse, especially as Meson strongly discourages globbing for random
files in the root.
So, here we are, doing what we can: finding where swrast_dri.so (aka
llvmpipe) lives, stashing that in an environment variable, and
deliberately leaking a dlopen handle which we never close to ensure that
neither llvmpipe nor LLVM leave our process's address space before we
exit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This is adding basically a copy of alpha-blending-test.c. The difference
is that here we use ICC files to set up the output color profile, and
then test light-linear blending only. BLOCK_WIDTH is set to 1 to fit
inside the output size used by the fixture setup, which is smaller than
in the original, but does not change the results.
The test is aimed at testing how color-lcms module succeeds in
linearizing the output of different ICC output profiles. Incorrect
linearization should cause changes in blending results.
The tolerance is taken from the currently achieved error statistics
(1.40908) and rounded up a little to achieve a suitable margin.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Switch from per-channel max error tolerance to max two-norm (Euclidean
distance) error. Geometrically this means that previously the accepted
volume was a +/- tolerance cube around the reference point, and now it
is a sphere with tolerance radius.
The real benefit is simplifying the code.
The error tolerance are also changed to float. Integers cannot represent
values between 1 and 2, and the jump from 1 to 2 would have been too
much. AdobeRGB tolerance gets relaxed a bit, while BT2020 tolerance
becomes stricter. The new tolerance values are the reported achieved
two-norm max errors plus a bit of margin.
Surprisingly the sRGB case tolerances remain strictly at zero, and
that's no bug in the test.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
compare_float() was an ad hoc max error logger with optional debug
logging.
Now that we have rgb_diff_stat, we can get the same statistics and more
with less code. It looks like we would lose the pixel index x, but that
can be recovered from the dump file line number.
This patch takes care to keep the test condition exactly the same as it
was before. The statistics print-out has more details now.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Marius Vlad