Added an entry with examples into the man page and also
into frontend/main.c for the '--help' interface.
Signed-off-by: Nicholas Niro <blowfist@xroutine.net>
Add missing documentation for the --address command-line argument
that lets the VNC backend listen only on a specified IP address.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Document the --additional-devices parameter to Weston to add secondary
DRM devices that will only be used as outputs, but not for rendering.
Fixes: 3c6cfe6bf4 ("backend-drm: add additional-devices to support multi GPU")
Signed-off-by: Marek Vasut <marex@denx.de>
Add a paragraph describing multi-backend support to running-weston.rst
and update the --backend parameter documentation in weston.man.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
On a desktop system, the expected behavior during a Weston start is that if any
monitor can be enabled, Weston starts up and enables the monitor. Outputs that
could not be enabled, stay disabled. This helps the user in debugging the failed
outputs.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
If Weston fails to configure a DRM output for whatever reason, it will fail to
start. Depending on the use-case, this may or may not be the correct behavior.
Add the "require-outputs" option to allow configuring the error behavior on
missing outputs.
Add documentation of the possible options to the man page.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
One .TP was lost, causing --wait-for-debugger section to be merged in
the previous section. Fix it.
Fixes 5ffda17e21
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Add documentation for the PipeWire backend.
Co-authored-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Clean up the code a little by dropping the now unnecessary switch case
in drm_output_init_pixman(). As a side effect, this enables all formats
that have a pixman_format entry in the pixel format table:
- rgb565
- xrgb8888
- argb8888
- xbgr8888
- abgr8888
- rgbx8888
- rgba8888
- bgrx8888
- bgra8888
- xrgb2101010
- argb2101010
- xbgr2101010
- abgr2101010
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Rather than reinventing --use-pixman and --use-gl throughout each
backend, just have a common --renderer=foo argument which can be used to
explicitly specify the renderer.
The old arguments are still handled for backwards compatibility.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Instead of passing --shell=foo-shell.so, just pass --shell=foo, whilst
accepting the old form for compatibility.
Whilst we're at it, document the --shell argument in the manpage and
README.
Signed-off-by: Daniel Stone <daniels@collabora.com>
While the --backend parameter looks like it takes a file name, it really
is selected from a list of supported strings that are then funneled
through a translation to enum weston_compositor_backend [1].
Because all backend parameters are of the form "...-backend.so", and
writing "--backend=...-backend.so" is boring, allow the --backend option
to match the backend name without "-backend.so" suffix instead.
For example, this allows to use "--backend=headless" instead of
"--backend=headless-backend.so".
Update help text and documentation. Keep the old way working for
backwards compatibility.
[1] 50dbf38514 ("libweston: use enum to choose the backend")
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Let VNC clients authenticate using the local username and password of
the user weston is running as. To avoid transmitting the password in
cleartext, make TLS security mandatory.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Some monitors expose a selector for the kind of content that will get
displayed, allowing them to optimise their settings for this particular
content type.
I got access to such a monitor, sadly even setting it to game mode
didn’t lower its atrocious latency, but drm_info[1] reports it to be set
correctly so hopefully it’ll work better with other monitors.
[1] https://github.com/ascent12/drm_info
Signed-off-by: Emmanuel Gil Peyrot <linkmauve@linkmauve.fr>
Add a new weston-vnc man page, based on the weston-rdp man page.
Also add links in the main weston man page.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
As things are, even when mode=current is specified on the .ini file,
a full modeset is needed (and done), which causes a very noticeable
screen blinking. That is because setting the max_bpc on a connector
needs full modesetting.
The idea here is that if mode=current on the .ini, no modesetting
should be done, so the current max_bpc is programmed into the
connector.
But if a custom max-bpc=... is specified, that will be used instead,
even if mode=current on the .ini
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/660
Signed-off-by: vanfanel <redwindwanderer@gmail.com>
The supplied path for executing the shell client could contain potential
arguments and not only the binary itself. Specifying the platform either
by using an argument (-platform wayland) or using an environmental
variable (QT_QPA_PLATFORM) with clients written in Qt is for instance
an example on why this might be useful to have in.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Patch adds KEY_UP/KEY_DOWN for tiled top and bottom positioning,
KEY_LEFT/KEY_RIGHT correspondingly, for left and right positioning.
It also modifies the man page to include these new bindings, But also with
commit 'compositor: Remove desktop zoom' we no longer have zoom effects
so removed them.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
It is only enabled by a debug key binding, currently not tested at all,
and is seems it doesn't really work, so let's remove it. This also
removes it from the man page.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
It's not the most code ever, but it does make desktop-shell somewhat
more complicated for questionable (i.e. no) end-user benefit.
When desktop-shell is back in more healthy shape it could potentially be
reintroduced, but for now it's just making it more difficult to reason
about desktop-shell and fix it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
For working around hardware limitations as explained in the man page.
Now added for completeness' sake without knowing if anyone will ever
need this.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This adds an option to program basic display color characteristics from
weston.ini. In the future there will be a way to set this information
from EDID, but because EDID is unreliable that will probably not be the
default. An ICC profile will likely override most or all of this. The
main reason to add this option is to be able to characterise HDR
monitors.
An 'output' section can have a key 'color_characteristics' (string)
set to a name. The name refers to any 'color_characteristics' section
with 'name' set to the same string.
The 'name' key of a 'color_characteristics' section cannot contain a
colon ':'. Names with colon in 'output' section key
'color_characteristics' value are reserved for future use, e.g. to
indicate that the metadata is to be taken from EDID instead of a
weston.ini section.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Trying to do HDR with XRGB8888 is a bit like using RGB565 on SDR: you
get visible color quantization and banding in gradients (without dithering
which Weston does not implement yet, and might not work too well for HDR
anyway).
Therefore, on any HDR mode, default output framebuffer format to 10 bpc
instead of 8 bpc.
Ideally we'd also optionally try 16F or 16 bpc formats, but automatic
fallbacks for those are more complicated to arrange. You can still
configure 16F or 16 bpc manually.
This patch also moves the default format setting from
drm_output_set_gbm_format() to drm_output_enable(), because setting the
default now requires eotf_mode. Frontends may call set_gbm_format()
first and set eotf_mode next. This does create an awkward situation for
outputs that a frontend disables and re-enables. This patch here makes
sure that the old output configuration remains, but changing eotf_mode
may not change the default format. One needs to call
set_gbm_format(NULL) to re-evaluate the default format. Resetting the
format on drm_output_deinit() would lose the current setting.
DRM_FORMAT_INVALID was introduced in libdrm 2.4.95 which we already
hard-depend on.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We currently hardcode a 60Hz update rate for the rdp backend.
In some cases it may be useful to override this to increase the rate
for a faster monitor, or to decrease it to reduce network traffic.
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Co-authored-by: Brenton DeGeer <brdegeer@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
We already have a way for a single RDP client connection to be
passed from a parent process to a child using a combination
of environment variable (RDP_FD) and env var (--env-socket)
This patch allows a bound socket fd (as opposed to a client
connection) to be established in a parent process and provided
to the rdp backend. WSLg uses this to set up an AF_VSOCK
socket for communication between a Windows RDP client and a
weston compositor running under a hypervisor.
Co-authored-by: Hideyuki Nagase <hideyukn@microsoft.com>
Co-authored-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Hideyuki Nagase <hideyukn@microsoft.com>
Signed-off-by: Steve Pronovost <spronovo@microsoft.com>
Signed-off-by: Brenton DeGeer <brdegeer@microsoft.com>
There are currently compatibility issues between FreeRDP's implementation
of the RemoteFX codec and Microsoft's implementation.
Perhaps this will be fixed in the future and this option can go away,
but for now it's necessary to have a way to disable the codec if the
windows client is going to be connecting to a weston server.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
With commit 'screen-share: Add option to start screen sharing on weston
star' an section option has been added to start screen-sharing by
default on all outputs. This has the side-effect of attempting to start
screen-share on the same (RDP) output performing the screen-share. That
happens due to re-loading the screen-share module once more.
This patch recommends users to use --no-config option or alternatively,
use a different configuration file to avoid that.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
These added lines are comments (do not affect output) that make it
easier to browse this file and find the section headings.
Removal of the preceding empty lines on two of the section headers
remove a blank line from PDF output. The blank line was kind of nice,
but presumably .SH should add any necessary blanks before a new section
heading. Now all the section headings have the same vertical space to
the preceding content in PDF.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Try to reduce the cargo-culted directives that do not seem to have any
effect on the output.
I verified that are no changes by doing before this patch
$ man -Tpdf man/weston.ini.5 > ref.pdf
and then after this patch
$ ninja && man -Tpdf man/weston.ini.5 > test.pdf
and looking at
$ diffpdf ref.pdf test.pdf
I used PDF as the format for comparisons, because it can express much
more typesetting features than plain text.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Fbdev backend was deprecated in the Weston 10.0.0 release with
6338dbd581. Before that, I suggested
already in 2019 to remove it, but it was too soon then. Now it seems the
final voices asking for fbdev to be kept have been satisfied, see the
linked issue.
Fbdev-backend uses a kernel graphics UAPI (fbdev) which is sub-par for a
Wayland compositor: you cannot do GPU accelerated graphics in any
reasonable way, no hotplug support, multi-output support is tedious, and
so on. Most importantly, Linux has deprecated fbdev a long time ago due
to the UAPI fitting modern systems and use cases very poorly, but cannot
get rid of it if any users remain. Let's do here what we can to reduce
fbdev usage.
I am doing color management related additions to libweston which require
adding checks to every backend. One backend less is less churn to write
and review.
Libweston major version has already been bumped to 11, so the next
release will be Weston 11, without fbdev. enum weston_compositor_backend
entries change their numerical values.
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/581
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Tablet shell was removed in 873b515aee in
2013. Time to remove the hopefully last reference to it.
We also gained kiosk shell in the mean time, so mention that instead.
Yes, it's a bit of a lie, because we also have ivi-shell and
fullscreen-shell, but I heard they might be on their way out, so I
didn't add them here.
Would be nice to add kiosk-shell in the SHELLS section too, but in this
patch I am only concerned about dropping the tablet shell reference.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Looks like at least from 2016 onwards the gbm-format option has also
been recognized in an output section.
Time to document that.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Since 62a9436417 the gbm-format option has
recognized all pixel formats listed in libweston/pixel-formats.c.
Clarify what pixel formats can be used.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This option is used only with the DRM-backend. Options in weston.ini(5)
should be either generic or for backends that do not have their own man
page yet.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This option is used only with the DRM-backend. Options in weston.ini(5)
should be either generic or for backends that do not have their own man
page yet.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This doesn't work with any of the launchers we've kept. Remove the option
and all the bits that handle it.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Moving forward we're going to be supporting libseat and logind as our
only launchers. We're doing this to reduce our maintenance burden,
and security impact.
Libseat supports all our existing use cases, and seatd can replace
weston-launch so we no longer have to carry a setuid-root program.
This patch removes weston-launch, and launcher-direct, leaving only
libseat and logind.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
