get_surfaces_on_layer() allocates memory and stores the pointer to
'ivisurfs'. But it was not freed.
Signed-off-by: Wataru Natsume <WATARU_NATSUME@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The warning of ivisurface reassign can be removed. It is ok to reassign
a surface to a layer it is already on.
The warning started to show up during normal operations since patch
"hmi-controller: remove duplicate commit_changes in random mode".
Signed-off-by: Wataru Natsume <WATARU_NATSUME@xddp.denso.co.jp>
[Pekka: rewrote commit message, removed unneeded comments.]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Previous code cleaned up surfaces in layer once and then added
surfaces to a layer in random. In this flow, two commitchanges are
required.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
[WATARU_NATSUME@xddp.denso.co.jp: Removes unnecessary check]
Signed-off-by: Wataru Natsume <WATARU_NATSUME@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
update_opacity is only called when a ivi-surface is visible. But the
previous code also checks event masks redundantly. However if the event
happens when ivi-surface is invisible, opacity is not calculated. This
patch removes this redundant check to fix potential bug.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[jonas: only send focus wl_pointer.frame if resource supports it]
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Use an event struct to pass axis events around. This helps dealing with the
upcoming axis discrete changes.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
It shows ivi applications at screensa randomly.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It shows ivi applications in fullscreen per screen like,
The first screen: Application 1,4,5,6,,,,
The seconed screen: Application 2,
The third screen: Application 3
Thie mode assigns one application to each screen at first. And remaind
applications more than screens will be assigned to the first screen.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It shows 2 ivi application in a screen at side-by-side. It moves
additinal application more than 2xN to next screen N+1.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It shows 8 ivi applications in a screen at tiling. It moves additional
application more than 8xN to next screen N+1.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
To locate surfaces of application on multi screens, multi layers are
created baseod on application-layer-id + base-layer-id-offset x N.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A surface ID for layer of background/panel image is set by key: background-id
or panel-id at weston.ini. To support multi screens, it also support offset,
surface-id-offset, to offset the surface ID to next ID for a layer on next
screen.
According to the above key, hmi-controller and ivi-shell-user-interface
who increments the number of screens per notification of wl_output.
crate surface and draw background/panel image on multi surface on screens.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A layer ID for screen is set by key: base-layer-id at weston.ini. To
support multi screens. It also support offset to offset the layer ID
to next ID for next screen.
For example,
base-layer-id=1000
base-layer-id-offset=10000
Layer id for screen 0: 1000
Layer id for screen 1: 11000
Layer id for screen 2: 21000
To support multi screen, create layers for background and panel bar which
located in the below per screens. At the moment, it is only layers.
Surfaces to be created at next patch in the patch set.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- get screens from weston core
- provide screens as internel method
- the iviscn is stored in array inverse order in index.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
A weston_surface is transformed to multi screen coordinate, global
coordinate by matrix:m now.
Additionally, a mask needs to be calucated, taking account into,
- multi screen coordination: a destination rectangle of layer in the
coordination is easily calcurated by adding weston_output.{x,y} in
simple. This is because there is no scaled and rotated transformation.
- intersect inside of a screen the layer is assigned to. This is because
overlapped region of weston surface in another screen shall not be
displayed according to ivi use case.
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In single screen, the coordinates of layer local coordinates are the
same as global coordinates. However, to support multi screens, the
layer-local coordinates shall be transformed to multi screen coordinates,
which is global coordinates. The abosolute coordinates of a screen in global
stored in (x,y) of output of its weston output so it shall be used to
transform layer-local to global coordinates.
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
For multi screen support, ivi_layout_screen to be taken account into
property change in commitChanges.
Property change is now done in update_prop so to consider ivi_screen
property for caluculating transform of weston surface, ivi_layout_screen
is added as a parameter of update_prop.
However, update_prop of weston_view of a ivi_surface can not be done
even if it is set on a screen. The propoerty change shall be done only
when a visibility of ivi_surface or ivi_layer which contains the
ivi_surface is ON. Such a condition shall be checked at commit_changes
as well to avoid calling update_prop, which actually updates
weston_views.
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Similar with Desktop shell, set activate to weston surface which is
left-clicked by pointer or touched. This is needed to focus it with a seat.
Without this, a feature who gets activated weston surface by using
weston_surface_get_main_surface doesn't work correctly because it can
not get correct focused weston surface. For example, input-panel uses
weston_surface_get_main_surface to get a weston surface. With this
weston surface, it get a member: output to decide which output shall
show a input-panel, software keyboard. Without activation,
input-panel-ivi can not find a correct output which shows e.g.
weston-editor who uses input-method.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It breaks from wl_list_for_each of screens when the frist screen found.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This is potential bug when it supports several screens. If view_list is
initilized here, the views, which are set by the previous screen, are
cleared. So View list shall be initilized in front of wl_list_for_each
of all screens.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In just previous wl_list_for_each_safe, list of layer in a screen is
cleaned up. And then, the list is re-constructed from
pending.layer_list.
In this re-construction, if order.link of a layer were inserted into a
screen whose number is later one of current screen, the order.link will
inserted into layer_list of two screens. This shall be avoided.
However, if we want to implement a feature to allow a layer to be added
to multiple screens. A layer shall have several order.link per screens.
So, I marked here as TODO.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It just return the first screen found in screen list.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Instead of only passing absolute pointer coordinates, effectively
loosing motion event data, pass a struct that can potentially contain
different types of motion events, currently being absolute and relative.
A helper function to get resulting absolute coordinates was added for
when previous callbacks simply used the (x, y) coordinates.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mariusz Ceier <mceier+wayland@gmail.com>
Reviewed-by: Jan Arne Petersen <janarne@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Don't only send motions and buttons but also axis events through the
pointer grab interface.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
The name of ivi_controller_interface is changed to ivi_layout_interface
with this patch.
This name is better suited to the interface, because it is implemented
in ivi-layout.c and its methods are linked to ivi_layout* functions.
Furthermore, the controller modules (e.g. hmi-controller) are the users
of this interface and they have their own interfaces,
which are called *_controller_interface,
e.g.: ivi_hmi_controller_interface.
This causes confusion about the software architecture.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
The internal API "get_weston_view" is introduced, which returns the
weston_view of the given ivi_layout_surface. The API returns a NULL
pointer, if the ivi_layout_surface does not have any weston_view.
The weston_view is required in many places of ivi-shell implementation.
Therefore, this API will reduce lines of code. Furthermore, it will
increase the maintainability of the ivi-shell implementation.
Old way of getting the weston_view was flawed, because the views list of
the weston_surface is read without controlling the existence of the
weston_surface. New implementation explicitly throws an error if the
weston_surface does not exist.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
[Pekka: Line-wrapped the commit message.]
This internal API is redundant, because a surface is allowed to be only
on one layer.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
This internal API is redundant, because a layer is allowed to be only on
one screen.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
link_layer's sole purpose is to link a surface to multiple layers, if
the surface should be shown in multiple layers. This can be only
achieved, if the surface has multiple weston_views with different
transformation matrices.
Current implementation assumes in many places that a ivi_surface has
only one weston_view. Therefore, a surface can be only shown on one
layer.
Although this (a surface on multiple layers) is a nice to have feature
for ivi-shell, it is not very crucial. In any case, it is not an easy
task to implement this feature, because it has lot of corner cases.
I removed with this patch the link_layer data structure, because it does
not have any purpose in current implementation.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
[Pekka: Line-wrapped the commit message.]
link_screen's sole purpose is to link a layer to multiple screens, if
the layer should be shown in multiple screens. This can be only
achieved, if surfaces of the layer have multiple weston_views dedicated
to the different screens.
Current implementation assumes in many places that a ivi_surface has
only one weston_view. Therefore, a layer can be only shown on one
screen.
Although this (a layer on multiple screens) is a nice to have feature
for ivi-shell, it is not very crucial. In any case, it is not an easy
task to implement this feature, because it has lot of corner cases.
I removed with this patch the link_screen data structure, because it
does not have any purpose in current implementation.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
[Pekka: Line-wrapped commit message.]
Check the return from layout_transition_register in order to fix
potential leak of memory pointed to by transition. And don't register a
null transition.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Several fixes to handle invalid transition objects:
1. Free transition in ivi_layout_transition_fade_layer if we fail to
allocate memory for data
2. Check if transition is not null and if layout_transition_register was
ok before return, if not, free transition
3. Destroy transition if layout_transition_register was not ok, we can't
just free transition, we need to call layout_transition_destroy in
order to free private_data from transition
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
create_layout_transition does not initialize is_transition_func.
This patch initializes it to NULL.
Signed-off-by: John-John Tedro <johnjohn.tedro@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
layout_transition_register could not work and we need to free trans in
the calling function.
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Free transition before return. We don't need to use layout_transition_destroy,
because transition was not registered yet.
v2: consolidate memory leaks fixes
Signed-off-by: Lucas Tanure <tanure@linux.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
A layer for workspace is used to display icons for invoking applications
in several pages. These pages are swapped from one to next page. The
width of the layer was decided as a size of screen before reading
weston.ini. This worked correctly because there was no feature of
clipping of layer so the width of layer was not taken account.
Now clipping feature is supported. So the width shall be set to correct
one after reading weston.ini.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
View clip region is set in surface-local coordinates. To compute that
region, the ivi-layer destination rectangle in the global coordinates
are transformed back into the surface-local coordinates.
The transformation is computed by first forming the transformation
matric for the forward mappings, and then inverting it. The inverse
matric is used to transform the destination rectangles to the
surface-local coordinate system. The intersection of the rectangles is
the view clip mask.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Checking wl_list_empty() on a link offers no information: if it returns
true, wl_list_remove() is safe to do. If it returns false, you still do
not know if wl_list_remove() is safe; the link could be part of a list,
or the link could be "uninitialized" (e.g. just wl_list_remove()'d).
(From Pekka Paalanen's comment at
http://lists.freedesktop.org/archives/wayland-devel/2015-August/023987.html).
Calling wl_list_init just before wl_list_insert is redundant. Because
the links of the list are not read before it is overwritten by
wl_list_insert.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
[Pekka: line-wrapped commit message]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It is only possible to remove a layer from the order.layer_list of a
screen, when ivi_layout_screen_set_render_order is called with an empty
array. Therefore, list of layers are cumulated if the API is called
many times with different list of layers.
Change how the flags are set:
- Introduce the dirty parameter for triggering the render order change.
- IVI_NOTIFICATION_REMOVE/ADD flags are set only at commit_screen_list.
Checking wl_list_empty() on a link offers no information: if it returns
true, wl_list_remove() is safe to do. If it returns false, you still do
not know if wl_list_remove() is safe; the link could be part of a list,
or the link could be "uninitialized" (e.g. just wl_list_remove()'d).
(From Pekka Paalanen's comment at
http://lists.freedesktop.org/archives/wayland-devel/2015-August/023987.html).
Calling wl_list_init just before wl_list_insert is redundant. Because
the links of the list are not read before it is overwritten by
wl_list_insert.
Use assert to control if the ivilayer->order.surface_list is empty.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
[Pekka: line-wrapped commit message]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
It is only possible to remove a surface from the order.surface_list of a
layer, when ivi_layout_layer_set_render_order is called with an empty
array. Therefore, list of surfaces are cumulated if the API is called
many times with different list of surfaces.
Change how the flags are set:
- Introduce the dirty parameter for triggering the render order change.
- IVI_NOTIFICATION_REMOVE/ADD flags are set only at commit_layer_list.
Checking wl_list_empty() on a link offers no information: if it returns
true, wl_list_remove() is safe to do. If it returns false, you still do
not know if wl_list_remove() is safe; the link could be part of a list,
or the link could be "uninitialized" (e.g. just wl_list_remove()'d).
(From Pekka Paalanen's comment at
http://lists.freedesktop.org/archives/wayland-devel/2015-August/023987.html).
Calling wl_list_init just before wl_list_insert is redundant, because
the links of the list are not read before it is overwritten by
wl_list_insert.
Use assert to control if the ivilayer->order.surface_list is empty.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
[Pekka: wrapped the commit message]
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
[Earlier version Reviewed-by: Nobuhiko Tanibata
<NOBUHIKO_TANIBATA@xddp.denso.co.jp>]
The final list of surfaces of set render order shall be applied. So link
of surfaces and list of surfaces in a layer shall be initialized. And
then the order of surfaces shall be restructured.
Use existing clear_surface_pending_list function to clear the list.
Signed-off-by: Emre Ucan <eucan@de.adit-jv.com>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
- opening braces are on the same line as the if statement
- opening braces are not on the same line as the function name
- space between for/while/if and opening parenthesis
Signed-off-by: Dawid Gajownik <gajownik@gmail.com>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Keyboards and pointers aren't freed when devices are removed, so we should
really be testing keyboard_device_count and pointer_device_count in most
cases, not the actual pointers. Otherwise we end up with different
behaviour after removing a device than we had before it was inserted.
This commit renames the touch/keyboard/pointer pointers and adds helper
functions to get them that hide this complexity and return NULL when
*_device_count is 0.
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Normally we need to check if a seat's [device_type]_count is > 0 before
we can use the associated pointer. However, in a binding you're
guaranteed that the seat has a device of that type. If we pass in
that type instead of the seat, it's obvious we don't have to test it.
The bindings can still get the seat pointer via whatever->seat if they
need it.
This is preparation for a follow up patch that prevents direct access
to seat->device_type pointers, and this will save us a few tests at
that point.
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Transform matrix for transforming a surface to global_matrix is
calculated from
* ivi_layout_surface_properties
* ivi_layout_layer_properties
This patch pareares sub-method like following,
1/ calc_surface_to_global_matrix()
calc_transformation_matrix() is called twice with
ivi_layout_surface/layer_properties respectively.
2/ calc_transformation_matrix()
This calcurates matrix from orientation, source rectangle and
destination rectangle.
2-1/ To calculate rotation, fit centor of source rectangle to (0,0)
temporarily. This is moved back in 2-4.
2-2/ Apply rotation variant
2-3/ Apply scale variant
2-4/ Apply positioning variant, taking account into 2-1 temporary
positioning.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
To refactor transform of ivi_layout_surface and ivi_layout_surface to be
more readable logical flow.
Remove following parts once,
* definition of weston_transform in ivi_layout_surface
* update_layer_orientation
* update_layer_position
* update_surface_position
* update_surface_orientation
* update_scale
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
There is no logic update.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
We used to rely on the order in which the
weston_compositor::destroy_signal callbacks happened, to not access
freed memory. Don't know when, but this broke at least with ivi-shell,
which caused crashes in random places on compositor shutdown.
Valgrind found the following:
Invalid write of size 8
at 0xC2EDC69: unbind_input_panel (input-panel-ivi.c:340)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea360 is 208 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Invalid write of size 8
at 0x4E3E0D7: wl_list_remove (wayland-util.c:57)
by 0xC2EDEE9: destroy_input_panel_surface (input-panel-ivi.c:191)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3BC7B: wl_resource_destroy (wayland-server.c:550)
by 0x40DB8B: wl_signal_emit (wayland-server-core.h:264)
by 0x40DB8B: weston_surface_destroy (compositor.c:1883)
by 0x40DB8B: weston_surface_destroy (compositor.c:1873)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea370 is 224 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Invalid write of size 8
at 0x4E3E0E7: wl_list_remove (wayland-util.c:58)
by 0xC2EDEE9: destroy_input_panel_surface (input-panel-ivi.c:191)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3BC7B: wl_resource_destroy (wayland-server.c:550)
by 0x40DB8B: wl_signal_emit (wayland-server-core.h:264)
by 0x40DB8B: weston_surface_destroy (compositor.c:1883)
by 0x40DB8B: weston_surface_destroy (compositor.c:1873)
by 0x4E3B6BB: destroy_resource (wayland-server.c:537)
by 0x4E3E085: for_each_helper.isra.0 (wayland-util.c:359)
by 0x4E3E60D: wl_map_for_each (wayland-util.c:365)
by 0x4E3BEC7: wl_client_destroy (wayland-server.c:675)
by 0x4182F2: text_backend_notifier_destroy (text-backend.c:1047)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Address 0x67ea368 is 216 bytes inside a block of size 232 free'd
at 0x4C2A6BC: free (vg_replace_malloc.c:473)
by 0x4084FB: wl_signal_emit (wayland-server-core.h:264)
by 0x4084FB: main (compositor.c:5465)
Looking at the first of these, unbind_input_panel() gets called when the
text-backend destroys its helper client which has bound to input_panel
interface. This happens after the shell's destroy_signal callback has
been called, so the shell has already been freed.
The other two errors come from
wl_list_remove(&input_panel_surface->link);
which has gone stale when the shell was destroyed
(shell->input_panel.surfaces list).
Rather than creating even more destroy listeners and hooking them up in
spaghetti, modify text-backend to not hook up to the compositor destroy
signal. Instead, make it the text_backend_init() callers' responsibility
to also call text_backend_destroy() appropriately, before the shell goes
away.
This fixed all the above Valgrind errors, and avoid a crash with
ivi-shell when exiting Weston.
Also using desktop-shell exhibited similar Valgrind errors which are
fixed by this patch, but those didn't happen to cause any crashes AFAIK.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
"remove" is not proper name beacause it destorys a layer. The name of
the api is changed from layer_remove to layer_destroy.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In previous code, it sends notification whenever setter calls. This
patch fixs that notification will not happens if there is no change of
properties by setter.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Previous code sends notification without event mask. So the notification
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This interface is required for user to manage screens per IDs.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
To get property changes of ivi_layer, callbacks can be registered.
However there was no API to remove a callback rather than removing all
callbacks by using layer_remove_notification.
layer_remove_notification_by_callback can do it.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
To get property changes of ivi_surface, callbacks can be registered.
However there was no API to remove a callback rather than remove all
callbacks by using surface_remove_notification.
surface_remove_notification_by_callback can do it.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
if a controller calls ivi_layout_layer_create_with_demenstion with a ID
which is already created before, the API returns exist ivi_layer.
However addtionally, it shall count up ref count to destroy ivi_layer
when ref count is 0. The previous code will destroy ivi_layer
immediately even if the other code still refers ivi_layer.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
ivi_shell_surface lifetime shall follow the ivi_surface protocol object
lifetime, and frees the ivi-id by destroying the ivi_layout_surface
from both wl_surface and ivi_surface destruction as the protocol specifies.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Removed duplicate definitions of the container_of() macro and
refactored sources to use the single implementation.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
To help reduce code duplication and also 'kitchen-sink' includes
the ARRAY_LENGTH macro was moved to a stand-alone file and
referenced from the sources consuming it. Other macros will be
added in subsequent passes.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Using the parent '../' path component in #include statements makes
the codebase more rigid and is redundant due to proper -I use.
Signed-off-by: Jon A. Cruz <jonc@osg.samsung.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Whether a input method is used should be the responsibility
of the shell because some shells may not want to implement
an input method at all
Signed-off-by: Murray Calavera <murray.calavera@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Especially, the size of destination rectagle is set to (1,1).
This is because the size will be used for caluculating scale and not to
be 0 to avoid 0 dividing.
I also remark this as FIXME. This shall be fixed at ivi-layout-tansition.c.
In new invoded application, its property is initilized by (0,0)
destination rectangle. So transition fucntion always calculates its scale
as inf at first frame of fade-in with new invoked application. To fix this,
restructing transition function is ideally needed.
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
This method should not update weston_view directly. This shall be done by
controller via ivi_layout_*.
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When application changes the size of its content, UI shall fit the source
rectangle, view area, to the size of its content to show whole content.
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Scale is calculated as float and to be inf. It shall be avoided by,
ivi_layout_surface_set_source/destination_rectangle. So output log and
then return this method to use prevous scale for fail safe.
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
ivi_layout_surface_configure is called from ivi-shell when configure
listener of weston surface is triggered. This function shall do,
- emit signal to hmi-controller to notify the configuration change
Other unnecesary logics are cleaned up.
Signed-off-by: Nobuhiko Tanibata <nobuhiko_tanibata@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
The reason why the result is not output in the method is that it avoids
to have dependency on CAIRO. If user want to output it to file, user
shall link CAIRO on its controller.
ivi_layout_surface_get_size is also supported here because user needs
stride to call ivi_layout_surafce_dump.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
If you do an out-of-tree build, all the images will be left in the
srcdir. Fix their paths.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
The ivi-shell / hmi-controller cannot run without a properly populated
config file. Generate a config file especially for tests, which includes
paths to the build dirs.
The generated file will be used by following patches adding ivi-shell
tests.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
When loading a controller module, if we do not find a
controller_module_init symbol, return failure to the caller instead of
ignoring the failure.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
This will be useful for tests, where we use --no-config, but ivi-shell
needs load the controller module from somewhere.
We are not making hmi-controller.so the default, because this patch
should allow running the tests also with another controller.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Let's me easily exit ivi-shell when testing with the DRM-backend.
Only available in ivi-shell developer mode.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Add a weston.ini option for ivi-shell to enable "developer mode".
When developer mode is enabled, hook up the debug key bindings.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Thanks Pekka for pointing that out.
Signed-off-by: Carlos Olmedo Escobar <carlos.olmedo.e@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
of application launching. This is because cancel callback is mistakenly
set to weston_touch_grab_interface. To fix this issue, add a
callback, touch_move_workspace_grab_frame and set it to the
weston_touch_grab_interface like desktop-shell.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
This fixes the breakage caused by "ivi-shell: make ivi-layout.c as a
part of ivi-shell.so"
hmi-controller.c:
A reference implementation of controller module does not use the layout
functions directly. This get function pointers at controller_module_init
which called by ivi-shell.
ivi-layout-export.h:
Definition of interfaces in a struction: ivi_controller_interface.
function pointers are set at ivi-layout.c.
ivi-layout-private.h:
Definition of some interfaces are remove bucause it is implemented in
ivi-layout.c and set it as function pointer. Several interfaces are kept
here because they are implemented in ivi-layout.c/transition.c but used
in other files.
ivi-layout-transition.c:
remove WL_EXPORT because export is not needed anymore.
remove unnesesary unsed method.
ivi-shell.c:
call controller_module_init of hmi-controller to init it and set
function pointers. If the interface_version is equal or
greater than what hmi_controller was built with, things are pass.
If the interface_version is smaller than what the controller expects,
it has to fail because it cannot work. This is followed the manner,
- never remove a function pointer
- never modify an existing function signature
- additions are allowed at the end of struct ivi_controller_interface
- all function pointers must always be populated and working in
ivi-shell.so (ivi-layout.c etc.)
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
ivi-layout.so is separately built and loaded by using dlopen with
RTLD_GLOBAL. This was because these apis defined in ivi-layout.so shall
be used by ivi-modules; e.g. hmi-controller. This shall be improved that
a struct ivi_layout_api contains the whole exported API as function
pointers to be exposed as module_init.
This patch alone builds, but loading controller modules at runtime
failes. This failure will be fixed by following patches.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Interfaces for properties setting shall be implemented in ivi-layout.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
In the future, re-alignmenet of WL_EXPORT per method should be done.
For that work, re-ordering is required to be used by another method.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
ivi_layout_transition_layer_render_order is not necesary called. Remove
the method and methods called by it.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
When ivi-module is not set in weston.conf, we probably want to tell the
user about their error instead of just dying.
Signed-off-by: Ondřej Majerech <majerech.o@gmail.com>
[Pekka: include Tanibata's suggestion, fix file name, fix surrounding
coding style]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- introduces ivi-shell/input-panel-ivi.c which is basically copied
from desktop shell. It shall be improvaded to remove duplicate
implementation.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- hmi-controller.so
- introduces hmi-controller.so
The library is used to manage layout of surfaces/layers. Layout change
is triggered by ivi-hmi-controller protocol, ivi-hmi-controller.xml. A
reference how to use the protocol, see ivi-shell-user-interface.c.
In-Vehicle Infotainment system usually manages properties of
surfaces/layers by only a central component which decide where
surfaces/layers shall be. This is differenct use case from desktop
style; each application can request property of its window via xdg-shell
protocol, like fullscreen and set its to top level. In-Vehicle
Infortainment system doesn't allow each application to chagen them from
its application because of safty reasons. The concept of layer is
simillar with a use case of cursor layer of Destop. For In-Vehicle
Infortainment system, it is extended to all applications. For example,
rearview camera application is assigned to a layer to group several
surfaces, e.g. captured image and drawing lines separately. Central
manaegr can control property of the layer of rearview camera.
This reference show examples to implement the central component as a
module of weston.
Default Scene graph of UI is defined in hmi_controller_create. It
consists of
- In the bottom, a base layer to group surfaces of background, panel,
and buttons
- Next, a application layer to show application surfaces.
- Workspace background layer to show a surface of background image.
- Workspace layer to show launcher to launch application with icons.
Paths to binary and icon are defined in weston.ini. The width of
this layer is longer than the size of screen because a workspace
has several pages and is controlled by motion of input.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- ivi-shell.so
- introduces ivi-shell/ivi-shell.[ch]
In-Vehicle Infotainment system traditionally manages surfaces with
global identification. A protocol, ivi_application, supports such a
feature by implementing a request, ivi_application::surface_creation
defined in ivi_application.xml.
The ivi-shell explicitly loads ivi-layout.so and a module to add
business logic like how to layout surfaces by using ivi-layout APIs.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
- ivi-layout.so
- introduces ivi-layout-export.h, ivi-layout.[ch]
API set of controlling properties of surface and layer which groups
surfaces. An unique ID whose type is integer is required to create
surface and layer. With the unique ID, surface and layer are identified
to control them. The API set consists of APIs to control properties of
surface and layers about followings,
- visibility.
- opacity.
- clipping (x,y,width,height).
- position and size of it to be displayed.
- orientation per 90 degree.
- add or remove surfaces to a layer.
- order of surfaces/layers in layer/screen to be displayed.
- commit to apply property changes.
- notifications of property change.
Signed-off-by: Nobuhiko Tanibata <NOBUHIKO_TANIBATA@xddp.denso.co.jp>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
