Commit Graph

12 Commits

Author SHA1 Message Date
Alexandros Frantzis
6ee80ecc9d tests: Add shot test for pointer cursor behavior
Add a regression test to verify that the cursor image is correctly
updated when setting a cursor surface with an already committed buffer
from a previous pointer entry, without recommitting a cursor buffer for
the current entry.

Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
2021-06-10 17:20:30 +03:00
Pekka Paalanen
fbd4160474 tests: add output damage test
This test ensures that client submitted damage goes to the screen
correctly, regardless of output scale or transform.

The added quirk is explained in the test that uses it.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
2021-02-25 12:54:17 +02:00
Pekka Paalanen
0f7da612eb tests: add drm_screenshot_no_damage
I am working on adding a test to ensure Weston repaints damage
correctly, where I rely on Weston repainting exactly and only the damage
submitted by a client. That means I have to stop screenshooting from
damaging everything automatically. Doing that, I noticed that
screenshots on DRM-backend could theoretically get stuck if I do that.
So test for it.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
2021-02-25 12:47:07 +02:00
Pekka Paalanen
ae12b9596d tests: add yuv-buffer test
This adds a test to ensure that the wl_shm formats YUV420, NV12 and YUYV
are decoded and converted to RGB correctly in GL-renderer.

The test deliberately uses a 256 x 256 test image so that effects from
width vs. pitch vs. stride cannot be observed, and row padding is zero.
Also padding between planes is zero. Attempting to use a test image with
less "round" dimensions lead to stride mismatch in GL-renderer, likely
due to GL_UNPACK_ALIGNMENT being left at value 4. It is unclear if YUV
wl_shm buffers' row stride needs to be aligned to 4 bytes or not, so I
did not pursue fixing it. GL-renderer seems to be confusing width, pitch
and stride even further, and not e.g. allow padding with ARGB buffers.
See also: https://gitlab.freedesktop.org/wayland/weston/-/issues/354

Furthermore, the test arranges so that each 2x2 pixel block has the same
color. This avoids having to consider chroma siting when sub-sampling.
This way all the test cases can use the same reference image.

The source image chocolate-cake.png is taken and copyright by Pekka
Paalanen, hereby licensed as
http://creativecommons.org/licenses/by-sa/4.0/ .

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
2020-12-17 09:34:09 +00:00
Pekka Paalanen
26258817fc tests: add alpha-blending test
In anticipation of invasive future work on color management, add an
alpha blending test to make sure we don't break alpha blending.

The idea for doing a monotonicity test came from glennk on #dri-devel in
Freenode IRC.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
2020-12-09 14:06:43 +02:00
Pekka Paalanen
4505f81111 tests: add viewport test for repeat mode
This test ensures that
	"pixman-renderer: half-fix bilinear sampling on edges"
keeps on working.

Unlike in the original report
https://gitlab.freedesktop.org/wayland/weston/issues/373, here we use buffer
scale 2 instead of output scale 2 to trigger bilinear filter. The effect is the
same, the actual resulting image in the failing case is just a little
different. This is so that it will be easy to add more viewport screenshooting
tests in this program in the future.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
2020-03-12 13:22:06 +02:00
Pekka Paalanen
147e67c425 tests: add buffer transform tests
This patch continues the buffer and output transforms testing by iterating
through a representative selection of buffer transforms and scales.

For more details, see the previous patch "tests: add output transform tests".

https://gitlab.freedesktop.org/wayland/weston/issues/52

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
2020-02-28 16:02:10 +02:00
Pekka Paalanen
97359ba5c5 tests: add output transform tests
This goes through all output transforms with two different buffer transforms
and verifies the visual output against reference images.

This commit introduces a new test input image 'basic-test-card.png'. It is a
small image with deliberately odd and indivisible dimensions to provoke bad
assumptions about image sizes. It contains red, green and blue areas which are
actually text that makes it very obvious if you have e.g. color channels
swapped. It has a white thick circle to highlight aspect ratio issues, and an
orange cross to show a mixed color. The white border is for contrast and a 1px
wide detail. The whole design makes it clear if the image happens to be rotated
or flipped in any way.

The image has one pixel wide transparent border so that bilinear sampling
filter near the edges of the image would produce the same colors with both
Pixman- and GL-renderers which handle the out-of-image samples fundamentally
differently: Pixman assumes (0, 0, 0, 0) samples outside of the image, while
GL-renderer clamps sample coordinates to the edge essentially repeating the
edge pixels.

It would have been "easy" to create a full matrix of
every output scale & transform x every buffer scale & transform, but that
would have resulted in 2 renderers * 8 output transforms * 3 output scales *
8 buffer transforms * 3 buffer scales = 1152 test cases that would have all
ran strictly serially because our test harness has no parallelism inside one
test program. That would have been slow to run, and need a lot more reference
images too.

Instead, I chose to iterate separately through all output scales & transforms
(this patch) and all buffer scales & transforms (next patch). This limits the
number of test cases in this patch to 56, and allows the two test programs to
run in parallel.

I did not even pick all possible scale & transform combinations here, but just
what I think is a representative sub-set to hopefully exercise all the code
paths.

https://gitlab.freedesktop.org/wayland/weston/issues/52

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
2020-02-28 15:07:51 +02:00
Riku Viitanen
57875cd018 Optimize PNGs with zopflipng 2019-03-28 10:09:52 +00:00
Pekka Paalanen
e7c6aa6af4 tests: add subsurface-shot test
This is marked as a FAIL_TEST, because the last image comparison fails
due to a bug in Weston.

Jointly authored by Pekka and Emilio.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Emilio Pozuelo Monfort <emilio.pozuelo@collabora.co.uk>
Reviewed-by: Micah Fedke <micah.fedke@collabora.co.uk>
[Pekka: move weston-tests-env as terminator to EXTRA_DIST, change
ok/FAIL to PASS/FAIL, write diff image only on fail.]
Acked-by: Quentin Glidic <sardemff7+git@sardemff7.net>
2017-02-07 14:25:27 +02:00
Derek Foreman
35b7f25ae3 tests/internal-screenshot: Fix test so it doesn't expect shell surfaces
We no longer have a race with shell startup because we create our own
colored surface and check that it's properly drawn.

Signed-off-by: Derek Foreman <derekf@osg.samsung.com>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
2015-05-26 11:26:06 +03:00
Bryce Harrington
fb9089d4f5 tests: Add internal test for the weston test screenshot capability
This also serves as a proof of concept of the screen capture
functionality and as a demo for snapshot-based rendering verification.
Implements screenshot saving clientside in the test itself.

This also demonstrates use of test-specific configuration files, in this
case to disable fadein animations and background images.

Signed-off-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-By: Derek Foreman <derekf@osg.samsung.com>
2015-05-21 15:06:11 -07:00