Until kernel mainline does merge the aysnc page flip ioctl, make the
whole bit look like it's unsupported. We can further switch it back when
it lands into the kernel.
Fixes: 9203d98f
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reported-by: Simon Ser <contact@emersion.fr>
Stop flushing surfaces that are put on an overlay plane on the output to
be repainted next, but that have to be painted into another output's
primary_plane.
Now that each output has its own primary_plane, and flush_damage() knows
the output that is going to be repainted, texture_used can be limited to
surfaces that will actually be used by the renderer during the following
repaint_output().
Always upload when called from gl_renderer_surface_copy_content() or
gl_renderer_create_surface() with the output parameter set to NULL.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
When flush_damage() is called, the output to be repainted next is
already known. Pass it along into the renderer, which can make use
of this information:
The GL renderer can get a better idea which SHM surface textures
actually have to be updated, in case a surface can be put on a plane
on one output, but not another.
A future Vulkan renderer could record texture uploads into an output
specific command buffer.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Currently dbus support is built when launcher-logind option
is set; let's split that such that dbus is its own option
and launcher-logind depends on dbus.
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Currently the dbus helper stuff is internal only in libweston,
let's move it to being public so that custom shells may use
the helper code.
Signed-off-by: Christopher Obbard <chris.obbard@collabora.com>
Use the shared helper extracted from the RDP backend to avoid leaking
modes into the output mode list on every resize.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The ensure_single_mode() helper replaces an output's single mode.
Extract it into libweston so it can be reused by the VNC backend,
and rename it to weston_output_set_single_mode().
At the same time, set the the previously missing
WL_OUTPUT_MODE_CURRENT flag on the new mode.
Fixes#758
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We can now have overlapping outputs, so we can remove the checks that
protected us against this previously.
We may want to consider adding checks for discontinuities in the future
though, so leave a brief comment where the checks used to be.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Now that planes are attached to paint nodes, we no have no reason to
prevent placing a view on a plane when it's on multiple monitors.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
The primary_plane is currently shared amongst all outputs, and is the last
barrier to having overlapping outputs.
Split it up and make it per output instead.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
The color-metadata-errors test inits outputs with a NULL compositor, and
makes a compositor that's entirely 0s except for the bits it's interested
in.
This makes a mess in a future where the primary_plane is split up per
output, as initializing the primary plane tries to add it to the
compositor's plane_list.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We don't need to do this, we can just leave them in the plane list until
they're used.
Also, doing so helps for when we want to move the primary_plane from
the compositor to the outputs in the future.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Remove plane->damage and instead accumulate damage on paint
nodes.
This is a step towards allowing multiple overlapping outputs.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Tracking the view's plane in the paint node in this way is a step towards
inflicting plane damage from paint node update during the output repaint,
instead of manually doing weston_view_damage_below().
We remove view->plane entirely and do all access through pnodes.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We used to do this through a byzantine path involving the view's plane
transitioning from NULL to primary - but that doesn't work very well
when we want to track the plane in the paint node, because the paint
node will never have a NULL plane state.
This can be removed later when we track damage on paint nodes.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Now that we have visibility for views, we can clip that to an output
and store it in paint nodes.
This requires us to split the paint_node_update() function into two,
one for things that need to be done before assign_planes() and
one for after.
This will eventually be useful for tracking damage with paint nodes,
as we'll need to damage a paint node's entire visible area for
some operations.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Pretty cosmetic right now, but make the ALL_DIRTY only contain set
bits, and fix the accidentally sparse bitfield.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This is kind of confusing, as the visibility calculation is just a side
effect of the damage accumulation.
At the expense of walking the paint node list another time, make this
a separate function.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Later, we'll want to use the visible region for damage tracking in
paint_nodes. For now, we can use it in the renderers where they've been
calculating it independently to draw paint nodes.
We still can't remove view->clip entirely, because
weston_view_damage_below() may be called before the first render of
a view, when its visible region hasn't been calculated yet. The
clip is empty at that point, which allows weston_view_damage_below()
to "work".
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This is when they need to be up to date. And it makes it so that
view_ensure_paint_node() only does what the function name indicates.
Also, later when we tie damage tracking to paint nodes it will make
more sense to update them just in time for the output being repainted.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
In the future we'd like to have multiple overlapping outputs.
weston_output_damage() currently adds damage to the output's coordinates
on the primary plane. This plane is shared between all outputs, so it
would result in damaging more than the intended output.
Eventually, plane damage will go away and be replaced by paint node damage,
and damaging the entire output would involve adding damage to a list of
paint nodes.
Instead, use a flag to indicate the output must be fully redrawn, and add
the damage during the repaint loop.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Right now every backend clears output damage from the primary plane when
it repaints. Instead of having this same operation spread across all
the backends, just do it in the core instead.
In the future, we want to remove damage tracking from the primary plane
entirely, and this is a small step in that direction.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We've just made this impossible, so we can now clean up all the TODO
locations.
I've only turned some of them into assert()s, because they're all mostly
in the same place.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
In the future when we track damage with paint nodes we have a problem when
a paint node is moved off of its output - it immediately stops being
present, so we don't generate damage for the move that placed it off
screen.
We don't want paint nodes to exist when their view isn't on their output
anyway, so let's cull these nodes at the point where we assign outputs to
views.
In the damage-from-paint-nodes future, this will let us properly post
damage when the paint node is destroyed.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Paint nodes should only exist when they're visible.
In the future where we want to track damage with paint nodes we need
this to be enforced, or damage won't properly be tracked when a
paint node is hidden from us but continues to exist.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
We want an output's z_order_list to only contain paint nodes for that
output, but until now we've been pretty careless about this.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Notify the shell of the state transition when going from fullscreen to
normal toplevel window.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
The fullscreen state for xwayland surfaces can currently only be
effectively set from the client side. This commit enables
libweston-desktop based shells to properly set the fullscreen state
for xwayland surfaces.
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Now that we deterministically create views for subsurfaces, we don't
need to stash them away into unused_views to dynamically create and free
them at repaint time.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Now we create subsurface views both when linking to the parent
subsurface, and when creating new views for the parent surface, we no
longer need to magically materialise new views when building the view
list.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we're linking a subsurface to its parent for the first time,
materialise new views for every view the parent has.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we're destroying a parent view, also destroy any of its children
which are subsurface views that we've created automatically in the core.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If a view is in the view list when it's being destroyed, we need to
rebuild the view list. However, doing so is currently very hairy as
views are created and destroyed at will ... including when rebuilding
the view list.
In preparation for creating and destroying subsurface views at the time
of the action rather than later at repaint time, pull out the immediate
view-list rebuild and simply mark the view list as needing a full
rebuild.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Most of the time when we're changing things about views, we don't need
to throw away the view list and rebuild it from scratch. The only times
when we need to do this are when views have been added to or removed
from the scene graph, or have been restacked within it.
Signed-off-by: Daniel Stone <daniels@collabora.com>
weston_view_geometry_dirty_internal() can be used by internal callers to
mark a view's internal geometry as dirty, without signaling the need for
a full rebuild of the view list.
This is a transitional step towards eliminating
weston_view_geometry_dirty() from public API. Up until recently, the
view-manipulation API has been that users should manually manipulate
lists of transforms, layers, and other internal members, then call
weston_view_geometry_dirty() as well as manually provoking damage.
Now that we have helper functions to handle view manipulation, they
still need to mark the view geometry as being dirty. However, most of
them do not need to invoke a full rebuild of the view_list, which is
only required when views are added or removed from the scene graph, or
restacked.
weston_view_geometry_dirty() will assume that everything has changed
before eventually being ushered out of existence.
Signed-off-by: Daniel Stone <daniels@collabora.com>
There's no need to go through and rebuild the subsurface list every
time. In addition to being unnecessary work, it complicates things like
damage tracking.
Track a new surface dirty status indicating that the subsurface tree has
changed in some way, and only rebuild subsurface stacking when this has
occurred.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When we're committing anything, return the collected status of what
we've just made live, including any changes resulting from subsurfaces
having changed.
Signed-off-by: Daniel Stone <daniels@collabora.com>
weston_view_geometry_dirty() marks the passed-in view as dirty, as well
as all of its children.
weston_view_update_transform() updates the geometry of its ancestors,
then itself.
Users are required (for now) to call weston_view_update_transform() in
order to not experience a disappointing amount of death-by-assert.
Users do not have a pointer to child views which are magically
materialised by the subsurface code.
The end result is disappointing. But it is less disappointing if
updating the transform for a view the user is actually aware exists,
also updates the transform for all its children.
Signed-off-by: Daniel Stone <daniels@collabora.com>
When the destroy signal is fired, child views will disassociate
themselves from the parent. This means that we can no longer see what
the child views are - and that recursive unmapping does not work.
Make sure that views are fully unmapped before anything else happens in
destroy, so we can recursively unmap child views.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Per the wl_subsurface spec:
A sub-surface becomes mapped, when a non-NULL wl_buffer is applied
and the parent surface is mapped. The order of which one happens
first is irrelevant. A sub-surface is hidden if the parent becomes
hidden, or if a NULL wl_buffer is applied. These rules apply
recursively through the tree of surfaces.
[...]
If the parent wl_surface object is destroyed, the sub-surface is
unmapped.
The terminology is kind of loose. My reading of this is that we should
'unmap' (hide from display, remove from input/focus consideration, etc)
a subsurface immediately when a parent is destroyed.
However, if the child surface is then paired with another parent which
is itself mapped, then the child surface should immediately be mapped,
because it has a non-NULL buffer already applied, and the parent surface
is mapped.
By marking the surface as 'unmapped' on parent destroy, we were removing
it from the scene graph, but also I think breaking the rules on mapping
by requiring another commit when it was reassociated with another,
already mapped, surface.
Removing the explicit surface unmap leaves the surface in the 'mapped'
state, but without any views, which I believe has the intended effect.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Quoth the spec:
A sub-surface becomes mapped, when a non-NULL wl_buffer is applied
and the parent surface is mapped. The order of which one happens
first is irrelevant. A sub-surface is hidden if the parent becomes
hidden, or if a NULL wl_buffer is applied. These rules apply
recursively through the tree of surfaces.
We currently apply this rule through reconstructing the view_list at
repaint time, materialising new views and garbage-collecting unwanted
views as appropriate. Since this can be a costly operation, it's best if
we move this closer to the source.
This makes the core recursively unmap any child views when the parent is
unmapped. Future commits will do the same for mapping new views.
Signed-off-by: Daniel Stone <daniels@collabora.com>
View transform parents can be set by anyone. parent_view, on the other
hand, is only set for subsurfaces.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This is heading towards being able to materialise subsurface views
closer to the source. weston_view_create() - being used only by
window-management code - will ultimately create all required subsurface
views as well. The internal variant will be used by this and also by the
subsurface code as required.
Signed-off-by: Daniel Stone <daniels@collabora.com>
This indicates that more than just the content changing, the form of the
buffer has changed in a way which may not be like-for-like to the
previous buffer but require significant reinterpretation. Examples
include the format, opacity, colour state, etc.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Both wl_surface.damage and wl_surface.damage_buffer explicitly refer to
the 'pending buffer'. wl_surface.attach states that there is no pending
buffer after the commit is processed, so it follows that a commit which
includes damage but no attach will not process any damage.
Change surface-commit processing to ignore all damage unless a buffer
was attached in the same commit cycle.
(Thanks to @pH5 for his spec analysis which I've just paraphrased here.)
Signed-off-by: Daniel Stone <daniels@collabora.com>
Instead of having a bool for whether or not a buffer has been attached
in this commit cycle, use a status bitmask.
Signed-off-by: Daniel Stone <daniels@collabora.com>
The only time we need to go through recalculating the surface size is
when either the buffer dimensions or the surface transforms have
changed. Now that we have dirty flags, use them to avoid a calculation
where required.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Instead of passing an output to weston_compositor_build_view_list(),
have it set up all the output z_order_lists at once.
This is a preamble for MR !1285 which wants to maintain a compositor
wide dirty bit for the view list.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Moves the output specific stuff into one place, after the view_list is
already properly set up.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
A video mode change would be needed to change the underlying renderer
framebuffer. All other backends make uses of this so let's do it for the
DRM-backend as well.
This would also be needed for the output capture to function properly as
we need call weston_output_update_capture_info() when a new mode set has
set. Otherwise we'd run into mismatched dimensions for the current mode
versus the dimensions set-up initially in weston_output_capture_source_info.
Signed-off-by: marius vlad <marius.vlad@collabora.com>
Turn the Pixman/GL if/else conditionals into switch cases to make it
easier to add support for other renderers in the future.
Also makes sure that weston --backend=wayland --renderer=noop fails
with an error message instead of segfaulting.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Turn the Pixman/GL if/else conditionals into switch cases to make it
easier to add support for others renderer in the future.
Also makes sure that weston --backend=x11 --renderer=noop fails
with an error message instead of starting with the GL renderer.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
There are some cases in which we are seeing segment breaks like this in
the debug scopes: (0.00, 0.00]. A segment whose domain goes from 0 to 0
makes no sense.
This happens because we are printing the breaks with only two decimal
places. Increase that to four, in order to have more accurate
information in the debug scopes.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
There's a case we were missing when printing the tone curves: the ones
with zero segments.
These are 16-bit sampled curves. Start taking them into account.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
If backend initialization fails, weston_compositor_shutdown() is called
twice, once right away in weston_compositor_load_backend(), and once in
weston_compositor_destroy().
Remove the first and fix a segfault when trying to weston_plane_remove()
the primary plane a second time.
Fixes: 90c11cf40e ("libweston: move weston_compositor_shutdown call out of backends")
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
This will help us to debug our color pipeline optimizer without the
need to craft special ICC profiles for that. In this initial patch,
we are able to add matrices and curve sets to the pipeline and assure
that the optimizer is doing the right thing.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
At the moment, when we merge two curve sets it becomes a sampled one.
With this change, we start merging power-law curve sets and keeping them
as parametric, as we'd rather have a parametric curve than a sampled
one.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
At the moment, when we merge curves we transform them into sampled
curves, even if they were parametric before.
If we have two inverse parametric curve sets in sequence in the color
pipeline, we can drop them both, as merging them would result in the
identity curve. If we don't do that and merge the resulting identity
with another curve set, we'll end up with a sampled curve.
Start dropping inverse curve sets in sequence. This change help us in
the following scenarios:
pipeline:
curve set A, curve set B (inverse of A), curve set C (parametric)
Merging A and B results in identity, and merging that with C results in
a sampled curve. With our changes, we end up with curve set C intact,
and we'd rather end up with a parametric curve than with a sampled one.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Move code that depend on cmsGetToneCurveSegment() to a new file:
color-curve-segments.c
This help us to eliminate #if HAVE_CMS_GET_TONE_CURVE_SEGMENT scattered
around color-transform.c, making the code clearer and helping to avoid
mistakes.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
clang 17 complains that `fourcc` in `gl_renderer_fill_buffer_info()` is
uninitialized in the default case, because it fails to recognize that
if hit, that case will `assert(0)`. To get rid of this complaint, we can
just apply clang's suggestion and initialize the variable with 0 when
declaring it.
Signed-off-by: Max Ihlenfeldt <max@igalia.com>
We already only conditionally use base.offset when an icon exists. We
should also avoid trying to create a coordinate with a NULL icon, as it
will fire an assert().
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
If we want to support multiple backends, the compositor must take care
to call this once, at the appropriate moment, so stop letting the
backends handle compositor shutdown themselves.
Move the weston_compositor_shutdown() calls from the backend::destroy
callbacks into weston_compositor_destroy() and the calls in the backend
creation error paths into weston_compositor_load_backend().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a weston_backend::shutdown callback to split out the part of
weston_backend::destroy that needs to be done before compositor
shutdown.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Before this patch, we would leak the drm_output if there was a pending
flip during shutdown.
Now we destroy the drm_output even if there's a pending flip (only
during shutdown, as we don't want to wait until flip completion to
destroy the output).
Also, it fixes a problem where weston_output_enable() is called right
after weston_output_enable() or weston_output_disable() and it could
fail to find available DRM objects (as they are only released after
the flip completion).
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Preserve the same order as desktop-shell for handling view (un)mapping,
so we can move these into a shared helper. These should have no
functional effect but provide a helpful bisect point.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Destroy the renderer before disconnecting the Wayland display.
Trying to destroy the GL renderer with the Wayland display already gone
crashes in the Mesa Wayland integration.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
After freeing the renderer, clear the compositor->renderer pointer to
avoid use-after-free errors.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Calling clip_transformed() 4 times in a row with the same polygon8 in
commit a4d31fa8bd introduced a bug
because the surf input is modified each time. This is fixed by working
on a local copy. The input parameter is marked constant to reflect the
change on the function prototype.
Fixes#764
Signed-off-by: Loïc Molinari <loic.molinari@gmail.com>
Prefer outputs that are not powered off when assigning a surface to an
output. If a surface covers the same area on two outputs, prefer the
one with the higher refresh rate.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
attach needs to consider the viewport as well, so it makes more sense
for attach to consistently access the weston_surface_state, rather than
part from the surface and part from a function argument.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Pull the buffer-size calculation in when we attach a new buffer. This
will be able to save us from doing the calculation at all in some cases.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Rebuilding regions can be an expensive operation, and we're adding more
of them. This means we need to be clever about when we actually do them.
Only dirty the paint nodes when the transform or buffer size has
actually changed, not on every commit.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Akin to the paint_node_status we already have, start also tracking a
surface dirty status. This will allow us to minimise the updates we need
to make.
Currently this is only collected, with no functional change made.
Signed-off-by: Daniel Stone <daniels@collabora.com>
If there is an opaque full-screen view with a compatible SHM client
buffer left after peeling off the client-side cursor view, bypass the
renderer and let Neat VNC read from the client buffer directly.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Instead of directly converting damage from pixman_region32_t in
global coordinates to pixman_region16_t in local coordinates,
use weston_region_global_to_output() to convert to pixman_region32_t
in local coordinates and then convert again to pixman_region16_t
in the same coordinate system, using vnc_region32_to_region16().
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
We previously had our own local variable for this, but now we can just
use the one in weston_compositor.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Until now we've only had the unadorned arithmetic functions, but they're
easy to abuse and tedious to use.
For now, we just add weston_coord_global_add/sub functions and use them
where appropriate.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This is stored as an unadorned weston_coord internally, but with getter
functions we can put together the appropriate global or surface
coordinate.
Use them where appropriate.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Let the GL renderer render to FBOs for RDP outputs and read the pixels
into the RDP frame buffer. This allows to run the RDP backend with the
GL renderer.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add switch statements where renderer specific API is called to prepare
for adding GL renderer support. No functional change.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Partially revert commit 89e1831cd7 ("pixman-renderer: add
weston_renderbuffer and create/destroy interface") to bring back the
shadow_surface pixman image. The renderbuffer is only wrapped around it.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Translate damage extents used to calculate glReadPixels rectangle from
global to local coordinates.
Fixes: b1606a9f2c ("gl-renderer: support automatically downloading FBO renderbuffers")
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
When an output is moved, all views that are not moving with it should
cause damage where they appear in it before and after the move, and all
prior damage should move with the output.
To avoid this complexity, just damage the full output after the move.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Track damage on struct weston_renderbuffer and drop the custom damage
region from struct wayland_shm_buffer.
Pass repaint damage to wl_surface_damage() instead of accumulated
renderbuffer damage.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
While the GL renderer is not able to directly render into the PipeWire buffers,
it is possible to read the rendered frame from the fbo into the PipeWire buffer.
Use the automatic download to add support for the GL renderer to the PipeWire
backend.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Instead of always initializing the Pixman renderer, make the initialization
dependent on the selected renderer. This makes it easier to add other renderers.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Make it easier to understand where ptr points to by using local variables for
the spa_buffer and spa_data.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Extract the pixman renderbuffer configuration from the add_buffer function into
a helper function to simplify the addition of the GL renderer.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Use helper function for setting up the pixman renderer to simplify the addition
of the GL renderer.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
clip_quad() is a dedicated clipping function for quads that doesn't
depend on any GL renderer internal structures. It can be moved out to
the clipper to be called by both the renderer and the clipping test
client without having to duplicate code.
Signed-off-by: Loïc Molinari <loic.molinari@gmail.com>
Since both the surface rect and the transformed quad are axis-aligned
in the simple clipping path, non-zero area detection can more
efficiently be checked post-clipping by comparing opposite edges.
Signed-off-by: Loïc Molinari <loic.molinari@gmail.com>
Add a basic check to let the clipper take the simple axis-aligned path
when nodes are solely transformed with a translation and/or a scaling.
That makes some nodes like sub-surfaces (which always have their
transform enabled) take the fast path in the common case.
Signed-off-by: Loïc Molinari <loic.molinari@gmail.com>
Move vertex clipper back to single-precision floating point
intermediates. Since positions are sent down the graphics hardware as
single-precision values, this prevents useless conversions between
single and double precision values and lets compilers fit twice as
much data into vector registers. It also removes a copy by letting the
clipper store vertices directly into the vertex buffer.
This is mostly reverting the conversion to double-precision that
happened along with the switch to the weston_coord struct for vertex
coordinates (commit 10e70bf23c).
Signed-off-by: Loïc Molinari <loic.molinari@gmail.com>
Let the graphics hardware handle the transformation from surface
position to texture coordinates. Paint nodes now have a single vertex
position attribute from which texture coordinates are derived. A new
vertex shader variant handles the transformation.
Signed-off-by: Loïc Molinari <loic.molinari@gmail.com>
The clipper transforms dirty rects to surface space before clipping.
Each dirty rect is transformed by the same matrix for each surface
rect. This change decouples the transformation and the clipping code
to transform and compute the bounding box of dirty rects just once.
Signed-off-by: Loïc Molinari <loic.molinari@gmail.com>
Clip dirty rects to surface rects in surface coordinate space.
Dispatch vertices in surface coordinates and let the graphics hardware
handle the transformations. Clipping in global coordinate space
implies a useless roundtrip on the CPU to get the clipped polygons
back in surface coordinates for the buffer transformation. Clipping in
surface coordinate space prevents that.
This might seem counter-intuitive at first because in surface space
it's the dirty rects that are clipped to axis-aligned surface rects,
while it's the opposite in global space.
The projection matrix now combines the view and the output transforms.
Signed-off-by: Loïc Molinari <loic.molinari@gmail.com>
Let the GL renderer render to FBOs and read the pixels into the Neat VNC
frame buffers. This allows to run the VNC backend with the GL renderer.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
For software backends like VNC, support downloading the FBO renderbuffer
contents via glReadPixels automatically at the end of repaint_output.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add support for creating surfaceless outputs and rendering to FBOs.
The backend has to create FBOs with the create_fbo API and pass the
resulting weston_renderbuffer handles to repaint_output.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Since the pixman_region32_t damage is initialized unconditionally, also
finalize it unconditionally. Otherwise we leak rectangle memory when
sb->output->frame is NULL.
Reported-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Add a to_pixman_renderbuffer() helper to consolidate the
container_of(renderbuffer, ...) macro calls.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Remove the now unused previous/total_damage regions and the
buffer/border_damage arrays, as well as the output_get_damage and
output_rotate_damage functions.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Create dummy renderbuffers to track surface buffer damage on
demand. The renderbuffer representing the surface buffer that
is currently rendered to is inferred using buffer age.
This aligns damage tracking with the Pixman renderer and will
simplify adding FBO rendering support.
The previous/total_damage regions and the buffer/border_damage
arrays are now unused except for validation.
They can be removed next.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Split the buffer age query out into a separate function.
The following patches will replace the remainder of the
output_get_damage function.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
In some circumstances (like system load) we seem to be racing with the
threads fontconfig creates and the resource release happening inside
cleanup_after_cairo(), and we would still find a cached entry holding a
font map reference while we are on the compositor exit path --
which happens in cleanup_after_cairo() when calling
cairo_debug_reset_static_data().
This was introduced with commit 823580e070, 'backend-headless: fully
release pango and fontconfig', as a way to have a clean memory leak
report, but due to the fact we can't influence how libraries manage
their threads, the solution (for now at least) would be to just remove
it entirely.
Running it at the end in the test itself, or before calling exit(2),
while it does narrow the window, it still exhibits the cairo crash assert
related to having cached entries in that font map hash table.
Reference: https://gitlab.freedesktop.org/wayland/weston/-/issues/756
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Since 2d70bdfdcd "drm-backend: add support
to output capture writeback source", the DRM-backend was broken for KMS
devices that do not support the atomic API. This fixes that.
We don't support writeback screenshots without atomic modeset support.
So for such devices, we never update the output capture info
(weston_output_update_capture_info()) for the writeback source.
The function that we use to pull writeback tasks
(weston_output_pull_capture_task()) asserts that the capture providers
(renderers, DRM-backend) did not forget to update the capture info
(size/format) if something changed. But as we've never updated the
capture info for such devices, it is zeroed, leading to an assert hit.
With this patch we only pull the capture task for KMS devices that
support the atomic API.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
In 2d70bdfdcd "drm-backend: add support to
output capture writeback source" we've ensured that disable_planes
should be false in order to support writeback capture tasks.
But this was wrong; disable_planes is transient (it is true when
there's some sort of content recording happening), and we enable/disable
that during compositor's lifetime.
This is dangerous and may result in a crash. Imagine the following
sequence:
1. screen recording starts, disable_planes is set to true.
2. for whatever reason the output size changes, and we end up
not updating capture info because we think that writeback is not
supported by the device.
3. screen recording stops, disable_planes is set to false.
4. user tries to take a writeback screenshot, and the
DRM-backend will pull a writeback capture task with
weston_output_pull_capture_task().
5. this function has an assert to ensure that the DRM-backend
did not forget to update the capture info, and we hit that
assert.
With this patch we drop disable_planes being false as a condition to
support writeback. So now we keep the capture info up-to-date even when
screen recording is happening, and we gracefully fail writeback tasks.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
This adds three new helpers: one to iterate over all debug scopes
created/added and other two are for simpler getters for the scope name
and the description.
Included with this change is also a simple test to retrieve them.
This is an alternative to using the debug scope list advertised when
using the weston-debug private extension. libweston users can use this
directly to know which scopes they can subscribe to, and there's no need
to have a client implementation for the weston-debug protocol.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Don't forget to transfer the fullscreen setting from the config to the backend.
Without this, weston tries to resize the window with the windowed output API but
that is not registered with new_config.fullscreen == true.
This code was accidentally lost in 0a5bb7acff
("backend-wayland: Use renderer enum type for config selection"). So just
restore it.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
We were printing only the matrices (cmsSigMatrixElemType) up to now.
Start printing the curve sets (cmsSigCurveSetElemType) as well.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
Function matrix_print() is called only by pipeline_print(), which
already checks if the log scope is enabled. So remove the repeated
check from matrix_print().
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
The addition in a former commit of the flags field in the activation data will
let us pass the reason for activation to the constraint logic. We use that
reason here to unconditionally enable constraints in the recently 'fullscreened'
surface.
Signed-off-by: Sergio Gómez <sergio.g.delreal@gmail.com>
Since we want to pass the view to the surface activation listener inside the
constraints code, and the surface is reachable from the view anyway.
The flags field will let us pass the reason for activation to the constraints
code, which will then handle especially the fullscreen case.
Signed-off-by: Sergio Gómez <sergio.g.delreal@gmail.com>
Currently, and for legacy reasons, weston_seat_set_keyboard_focus() contains
logic related to surface activation. Since this function is always called from
weston_view_activate_input(), move that code there where it seems more
appropriate.
This will help us in subsequent commits by avoiding to have to change the
signature of weston_seat_set_keyboard_focus(), which would make that function
even more awkward than it currently is.
Signed-off-by: Sergio Gómez <sergio.g.delreal@gmail.com>
This is because e619a65b09, 'libweston: move gl-borders code into
helper lib' and 6293ab1f90, 'libweston, shared: Move out
weston_shell_get_binding_modifier' moved things out of libweston, and
libweston implicitly depends on xkbcommon.
Rather than just depending on dep_xkbcommon use the deps_for_libweston_users
which includes some other dependencies as well. Had to move it out
of libweston/meson.build and include it in the main meson.build as
libweston/meson.build would have a circular dependency on
libweston/meson.build file.
This fixes the following build issue:
[ 5s] FAILED: libweston/libgl-borders.a.p/gl-borders.c.o
[ 5s] cc -Ilibweston/libgl-borders.a.p -Ilibweston -I../libweston -I. -I.. -Iinclude -I../include -I/usr/include/wayland -I/usr/include/pixman-1 -I/usr/include/cairo
-I/usr/include/libpng16 -I/usr/include/freetype2 -I/usr/include/webp -fdiagnostics-color=always -D_FILE_OFFSET_BITS=64 -Wall -Winvalid-pch -Wextra -Wpedantic -std=gnu99 -Wmissing-prototypes
-Wno-unused-parameter -Wno-shift-negative-value -Wno-missing-field-initializers -Wno-pedantic -Wundef -fvisibility=hidden -O2 -Wall -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=3
-fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -Werror=return-type -flto=auto -g -fPIC -MD -MQ libweston/libgl-borders.a.p/gl-borders.c.o -MF
libweston/libgl-borders.a.p/gl-borders.c.o.d -o libweston/libgl-borders.a.p/gl-borders.c.o -c ../libweston/gl-borders.c
[ 5s] In file included from ../libweston/renderer-gl/gl-renderer.h:32,
[ 5s] from ../libweston/gl-borders.h:28,
[ 5s] from ../libweston/gl-borders.c:31:
[ 5s] ../include/libweston/libweston.h:39:10: fatal error: xkbcommon/xkbcommon.h: No such file or directory
[ 4s] FAILED: shared/libshared.a.p/config-parser.c.o
[ 4s] cc -Ishared/libshared.a.p -Ishared -I../shared -I. -I.. -Iinclude -I../include -I/usr/include/wayland -I/usr/include/pixman-1 -fdiagnostics-color=always -D_FILE_OFFSET_BITS=64 -Wall
-Winvalid-pch -Wextra -Wpedantic -std=gnu99 -Wmissing-prototypes -Wno-unused-parameter -Wno-shift-negative-value -Wno-missing-field-initializers -Wno-pedantic -Wundef -fvisibility=hidden -O2
-Wall -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=3 -fstack-protector-strong -funwind-tables -fasynchronous-unwind-tables -fstack-clash-protection -Werror=return-type -flto=auto -g -fPIC -MD -MQ
shared/libshared.a.p/config-parser.c.o -MF shared/libshared.a.p/config-parser.c.o.d -o shared/libshared.a.p/config-parser.c.o -c ../shared/config-parser.c
[ 4s] In file included from ../shared/config-parser.c:44:
[ 4s] ../include/libweston/libweston.h:39:10: fatal error: xkbcommon/xkbcommon.h: No such file or directory
Reported-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Consolidates the 'Using GL/Pixman renderer' message emitted by the
PipeWire, RDP, VNC, and X11 backends by moving the weston_log() into
weston_compositor_init_renderer(). Only print the message after
initializing the renderer has succeeded.
This effectively adds the message to the DRM, headless, and Wayland
backends.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Hardcode the ad hoc EDID parser to always claim that only SDR is
supported. Even though libdisplay-info is not yet asked for HDR
capabilities, it shall be the only way to see them.
To be nicer to experimenters, main.c adds a note that you really need
libdisplay-info if you want to play with HDR.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Add libdisplay-info as a better alternative for parsing EDID. This way
we do not need to extend Weston's ad hoc parser for new things that
especially HDR support requires.
Eventually the ad hoc parser will be deleted and libdisplay-info becomes
a hard dependency for the drm-backend, reducing our maintenance burden.
Unlike the ad hoc code, libdisplay-info has automated CI testing.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Move the ad hoc filling code into a separate function. Then we can
easily add an alternative implementation of the new function using
libdisplay-info without messing up the code any more than necessary.
Pure refactoring.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Now that this is used only internally in modes.c, move it there. It will
not be used with libdisplay-info.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This will make adding libdisplay-info as another EDID parser easier,
because libdisplay-info always returns malloc'd strings.
To make things easier to extend as well, I introduce struct
drm_head_info. The libdisplay-info case will likely return more
information than this in the future.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In Pipewire and Gstreamer terminology Weston is a "live" source (as we
do not explicitly set PW_KEY_STREAM_IS_LIVE to false).
Such sources, be it compositors, cameras or microphones, usually set
the current system time as timestamps on buffers in order to make life
easier for consumers. Thus let's do so as well.
This notably helps when recording using `gstpipewiresrc` with the
`keepalive-time` property set.
Signed-off-by: Robert Mader <robert.mader@collabora.com>
As of PipeWire version 0.3.69, the gstpipewiresrc element uses the
existence of a modifier as a trigger to select dmabuf memory, failing
caps negotiation as we don't send DMA buffers yet.
Remove the linear modifier for now, to be added back when we add dmabuf
support to the PipeWire backend. This allows testing the PipeWire
backend with current GStreamer + PipeWire.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Pass the backend instead of the compositor to the PipeWire output API
create_head() method and increment the API version.
That way the backend will not have to find the backend pointer from the
compositor. This is trivial now, but in the multi-backend case would
entail iterating over all backends to find the correct one.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
The session_listener is embedded in the DRM backend structure.
Use this to obtain the DRM backend with container_of().
That way the DRM backend will not have to be found from the compositor.
This is trivial now, but in the multi-backend case would entail
iterating over all backends to find the correct one.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Add a separate PipeWire backend based on the PipeWire plugin. The backend
requires PipeWire 0.3.x.
The PipeWire backend can be used as a standalone-backend backend for streaming
and composing Wayland clients to PipeWire.
The backend supports the on-demand creation of heads via the
weston_pipewire_output_api_v1. It also supports per-output pixel format
configuration via a gbm-format option.
Multiple PipeWire outputs can be created by setting the num-outputs option in
the [pipewire] section.
Co-authored-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Currently, if a head is detached, the entire state of the device is invalidated
to make sure that the connector is disabled on the next atomic commit. Side
effect of the invalid state is that all planes are disabled on the next commit.
This includes planes that are used with a different head that is not part of the
next atomic commit. Disabling the planes of unrelated outputs causes a blanking
of these outputs until output is repainted and the plane is reenabled.
Store the detached heads in a list on the output and disable the connectors for
all heads in this list in the next atomic commit.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Pass the VNC backend to vnc_head_create().
That way the already known backend will not have to be found from the
compositor. This is trivial now, but in the multi-backend case would
entail iterating over all backends to find the correct one.
Also remove the now unused to_vnc_backend() helper.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Pass the RDP backend to rdp_head_create().
That way the already known backend will not have to be found from the
compositor. This is trivial now, but in the multi-backend case would
entail iterating over all backends to find the correct one.
Also remove the now unused to_rdp_backend() helper.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Pass the backend instead of the compositor to the windowed output API
create_head() method and increment the API version.
That way the backend will not have to find the backend pointer from the
compositor. This is trivial now, but in the multi-backend case would
entail iterating over all backends to find the correct one.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
The output move listener removal was incomplete. Remove the remaining
bits to fix a segfault on shutdown.
Fixes: 40f5eaf401 ("backend-vnc: use output power_state to disable repainting while disconnected")
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
This was not found in the test suite, but if you run wayland-backend
manually with ASan, you see the same leaks as in
backend-headless: fully release pango and fontconfig
Fix them the same way.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
With weston_output_power_on/off() we can use power_state to disable
repainting completely while no VNC client is connected. This allows
to remove the initial repaint and per-output damage tracking.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Whenever a color transformation is being created, this debug scope
prints its pipeline before and after being optimized. It should be used
with the color-lcms-transformations scope.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
It prints the existent color profiles for new subscribers. Also prints
any creation/destruction of color profiles.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
It prints the existent color transformations for new subscribers. Also
prints any creation/destruction of color transformations.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
We have a string describing the ICC profile. cmsGetProfileVersion()
returns a float value, and we are converting that to string with "%f"
and saving to this description. Instead, use "%.1f" to restrict it to a
single decimal value, which is enough. With this change we have e.g.
"version 4.4" instead of "version 4.4000000".
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
LCMS API cmsStageAllocToneCurves uses cmsDupToneCurve which internally
re-allocates a new table of points. As a result, we have to free the old
table returned from lcmsJoinToneCurve.
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
We were declaring that the binding handler took an enum in the
declaration (good!), but then using a uint in the definition (oops).
cf. wayland/weston!1205
Signed-off-by: Daniel Stone <daniels@collabora.com>
wl_array_for_each() returns a pointer to each storage location; as we're
storing a pointer to drm_fb, this means that we have a drm_fb **, not a
drm_fb *.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Rather than setting the initial power state when adding
it (using weston_compositor_add_output), do that at the initilization
stage.
Reason being that the compositor can set up the output from the start as
FORCED_OFF, before enabling the output, rather than enabling the output
and then turning off the power of the output.
Signed-off-by: marius vlad <marius.vlad@collabora.com>
Rather than damaging the output before the output has been added with
weston_compositor_add_output, do that afterwards as to avoid scheduling
a repaint for that output *before* actually adding the output.
This would avoid the awkward case where we attempt to set initial power
state to normal, but we can't apply it at that stage.
Signed-off-by: marius vlad <marius.vlad@collabora.com>
For some reason we'd managed to have a mismatching header prototype and
implementation. Fix this up to consistently use enums everywhere.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Output repaint uses a pair of fence syncs to profile GPU execution by
retrieving their timestamps once signalled. While the end timestamp
can be rather inaccurate in some cases (drivers reusing sync objects
from previous command buffers), the begin timestamp is never correct
because fence syncs are signalled on command buffer completion.
Get rid of the begin fence sync and use the EXT_disjoint_timer_query
extension to measure the actual repaint duration and extrapolate the
begin timestamp from the end one.
Fixes#342
Signed-off-by: Loïc Molinari <loic.molinari@gmail.com>
Based on patches from:
Peter Hutterer <peter.hutterer@who-t.net>
Lyude Paul <thatslyude@gmail.com>
Bastian Farkas <bfarkas@de.adit-jv.com>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
When it comes to a window frame, a tablet tool and cursor act almost
identical; they click things, drag things, etc. The tool type and extra
axes don't serve any use in the context of a window frame, so tablet
pointers share the frame_pointer structures used for the mouse pointer.
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lyude Paul <thatslyude@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Bastian Farkas <bfarkas@de.adit-jv.com>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
The tablet is given a separate cursor. Most tablet interaction is an absolute
interaction and shouldn't need a cursor at all, but usually the cursor is used
to indicate the type of virtual tool currently assigned.
Based on patches from
Peter Hutterer <peter.hutterer@who-t.net>
Lyude Paul <thatslyude@gmail.com>
Bastian Farkas <bfarkas@de.adit-jv.com>
Maniraj Devadoss <Maniraj.Devadoss@in.bosch.com>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Based on a patches from
Peter Hutterer <peter.hutterer@who-t.net>
Lyude Paul <thatslyude@gmail.com>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Based on a patch from
Peter Hutterer <peter.hutterer@who-t.net>
Lyude Paul <thatslyude@gmail.com>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Closely modelled after the pointer focus handling
Co-authored-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Lyude Paul <thatslyude@gmail.com>
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Bastian Farkas <bfarkas@de.adit-jv.com>
Based on a patch from
Peter Hutterer <peter.hutterer@who-t.net>
Lyude Paul <thatslyude@gmail.com>
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Introduces three new structs, weston_tablet and weston_tablet_tool for the
respective devices, with the respective information as it's used on the protocol.
And weston_tablet_tool_id to track the tools of a tablet.
Note that tools are independent of tablets, many tools can be used across
multiple tablets.
The nesting on the protocol level requires a global tablet manager, a tablet
seat nested into weston_seat. The list of tablets and tools are also part of
the weston_seat.
Most functions are stubs except for the actual tablet and tablet tool
creation and removal.
This is based on patches from Peter Hutterer <peter.hutterer@who-t.net> and
Bastian Farkas <bfarkas@de.adit-jv.com>.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
We have an optimization to skip composition if there's no damage on the
primary plane and we already have a renderer buffer active. But we don't
allow this optimization if there's a pending capture task for the
output. For the renderer-based sources, that is really necessary, but
for the writeback source we should allow this optimization.
Signed-off-by: Leandro Ribeiro <leandro.ribeiro@collabora.com>
A popup grab is specified to have the top most popup surface gain
keyboard focus. This means the keyboard focus should always follow the
most recent xdg_popup.grab() surface. Make sure this happens by keeping
track of the parent surface in the libweston-desktop popup grab,
updating the keyboard focus when surfaces are added and removed from the
popup chain, and restoring the keyboard focus to the toplevel when there
are no popups anymore.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Popups should have keyboard focus when active, but the toplevel window
should still appear "active". Make sure this is the case by changing the
"active" tracking to see whether any child surface has keyboard focus.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
When doing plane selection for an output CRTC check if the plane
already has a CRTC attached and if so prefer that plane only for
the corresponding CRTC.
This prevents changing a CRTC's primary plane when it is active
which is not allowed by the DRM framework.
Based-on-patch-by: Eric Ruei <e-ruei1@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
For some reason we'd managed to have a mismatching header prototype and
implementation. Fix this up to consistently use enums everywhere.
Signed-off-by: Daniel Stone <daniels@collabora.com>
We map view alpha(0.0-1.0) to plane state's alpha
by using the max plane alpha value got from drm.
Signed-off-by: Hsuan-Yu Lin <hlin@jp.adit-jv.com>
Signed-off-by: Veeresh Kadasani <external.vkadasani@jp.adit-jv.com>
Signed-off-by: Vinh Nguyen Trong <Vinh.NguyenTrong@vn.bosch.com>