Commit Graph

6298 Commits

Author SHA1 Message Date
Pekka Paalanen
999876a8f9 protocol: add weston_touch_calibration
This is a Wayland protocol extension to allow the calibration of
touchscreens in Weston.

See: https://phabricator.freedesktop.org/T7868

v2:
- replace "server" with "compositor"
- rephrase error conditions to be simpler
- reword the matrix description in 'save' request
- rephrase when touch_device events are sent
- change device id to DEVPATH with "/sys" prefix
- qualify calibration units better
- replace wrong_touch event with a more generic invalid_touch
- fix error enum and add bad_coordinates
- convert while cancelled will not raise any errors

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-05-30 14:46:24 +03:00
Louis-Francis Ratté-Boulianne
c4689ff1d0 input: introduce touch event mode for calibrator
In addition to the normal touch event processing mode, introduce a new
mode for calibrating a touchscreen input device.

In the calibration mode, normal touch event processing is skipped, and
the raw events are forwarded to the calibrator instead. The calibrator
is not yet implemented, so the calls will be added in a following patch.

To switch between modes, two functions are added, one for entering each
mode. The mode switch happens only when no touches are down on any touch
device, to avoid confusing touch grabs and clients. To realise this, the
state machine has four states: prepare and actual state for both normal
and calibrator modes.

At this point nothing will attempt to change the touch event mode.

The new calibrator mode is necessary, because when calibrating a
touchscreen, the touch events must be routed to the calibration client
directly. The touch coordinates are expected to be wrong, so they cannot
go through the normal focus surface picking. The calibrator code also
cannot use the normal touch grab interface, because it needs to be able
to distinguish between different physical touch input devices, even if
they are part of the same weston_seat. This requirement makes
calibration special enough to warrant the new mode, a sort of "super
grab".

Co-developed by Louis-Francis and Pekka.

Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-05-30 14:46:14 +03:00
Pekka Paalanen
332a45e096 input: do not forward unmatched touch-ups
Commit a30e29af2e introduced the code to
deal with a touchscreen with touches already down when Weston starts
using it. It fixed the touchpoint counting problem.

However, Weston still should not forward or process the unmatched
touch-ups either. Code inspection says it would confuse the
idle-inhibit counting, and it could probably confuse clients as well.
Hence, just drop unmatched touch-ups.

Enhance the warning message to allow identifying where the event came
from.

v2:
- use syspath instead of devpath

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-05-30 14:46:14 +03:00
Louis-Francis Ratté-Boulianne
813a06e455 input: move touchpoint counting up
The touchpoint counting is needed regardless of what we do with the
touch events, so move it out of process_touch_normal() into the caller
notify_touch_normalized().

This is pure refactoring.

Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-05-30 14:46:05 +03:00
Pekka Paalanen
f406253d3c libweston: introduce notify_touch_normalized() and doc
notify_touch_normalized() is an extended form of notify_touch(), adding
normalized touch coordinates which are necessary for calibrating a
touchscreen.

It would be possible to invert the transformation and convert from
global coordinates to normalized device coordinates in input.c without
adding this API, but this way it is more robust against code changes.

Recovering normalized device coordinates is necessary because libinput
calibration matrix must be given in normalized units, and it would be
difficult to compute otherwise. Libinput API does not offer normalized
coordinates directly either, but those can be fetched by pretending the
output resolution is 1x1.

Anticipating touch calibration mode, the old notify_touch() is renamed
into a private process_touch_normal(), and the new
notify_touch_normalized() delegates to it.

Co-developed by Louis-Francis and Pekka.

v2:
- introduce struct weston_point2d_device_normalized
- rename notify_touch_cal() to notify_touch_normalized()
- remove WESTON_INVALID_TOUCH_COORDINATE

Cc: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-05-30 14:46:05 +03:00
Pekka Paalanen
bcbce33000 libweston: notify_touch API to use weston_touch_device
Relay touch input events into libweston core through the
weston_touch_device, so that the core can tell which individual physical
device they come from.

This is necessary for supporting touchscreen calibration, where one
needs to process a single physical device at a time instead of the
aggregate of all touch devices on the weston_seat.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-05-30 14:45:58 +03:00
Pekka Paalanen
09fbe14e8f libinput: move calibration printing into do_set_calibration()
Move calibration printing here and call do_set_calibration() from
evdev_device_set_calibration() so that all matrix setting paths print
the same way.

Print the matrix values in a matrix style to help readability, and
mention the input device.

v2:
- use 'cal' instead of 'calb' as variable name

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-05-30 14:42:13 +03:00
Louis-Francis Ratté-Boulianne
6ef59c9843 input: introduce weston_touch_device
Introduce weston_touch_device for libweston core to track individual
touchscreen input devices. A weston_seat/weston_touch may be an
aggregation of several physical touchscreen input devices. Separating
the physical devices will be required for implementing touchscreen
calibration. One can only calibrate one device at a time, and we want to
make sure to handle the right one.

Both backends that support touch devices are updated to create
weston_touch_devices. Wayland-backend provides touch devices that cannot
be calibrated, because we have no access to raw touch coordinates from
the device - calibration is the responsibility of the parent display
server. Libinput backend provides touch devices that can be calibrated,
hence implementing the set and get calibration hooks.

Backends need to maintain an output pointer in any case, so we have a
get_output() hook instead of having to maintain an identical field in
weston_touch_device. The same justification applies to
get_calibration_head_name.

Also update the test plugin to manage weston_touch_device objects.

Co-developed by Louis-Francis and Pekka.

v2:
- Consistently use 'cal' instead of 'calb' or 'matrix'.
- change devpath into syspath
- update copyrights

Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-05-30 14:42:13 +03:00
Markus Ongyerth
995bf51b2c weston-info: destroy wl_keyboard
Fixes a memory leak by calling wl_keyboard_destroy on any keyboard
that was used to listen for events.

Signed-off-by: Markus Ongyerth <wl@ongy.net>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-05-29 13:34:46 +03:00
Markus Ongyerth
ccdc81d609 weston-info: Add support for tablet-unstable-v2
This now prints each tablet seat with at least one tablet/pad/tool
attached.
For each tablet seat, each tablet, pad and tool is printed with as much
detail about the device as the protocol provides.
Seat info is stored to be referenced, because the protocol requires to
request a tablet_seat for each wl_seat and it's not guaranteed that the
tablet_v2_manager is available when seats are advertised.

Signed-off-by: Markus Ongyerth <wl@ongy.net>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-05-29 13:33:13 +03:00
Dima Ryazanov
e0dc5d47cb Fix a crash when unlocking or unconfining a pointer
In GNOME (but not in Weston), if a window loses focus, the client first receives
the focus event, then the unlock/unconfine event. This causes toytoolkit to
dereference a NULL window when unlocking or unconfining the pointer.

To repro:
- Run weston-confine
- Click the window
- Alt-Tab away from it

Result:

[1606837.869] wl_keyboard@19.modifiers(63944, 524352, 0, 0, 0)
[1606837.926] wl_keyboard@19.leave(63945, wl_surface@15)
[1606837.945] wl_pointer@18.leave(63946, wl_surface@15)
[1606837.956] wl_pointer@18.frame()
[1606837.961] zwp_confined_pointer_v1@26.unconfined()
Segmentation fault (core dumped)

To fix this, get the input from the window instead of the other way around.

Signed-off-by: Dima Ryazanov <dima@gmail.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
2018-05-29 13:26:53 +03:00
Guido Günther
da1888356e simple-dmabuf-drm: support DRM_FORMAT_LINEAR for NV12 as well
This makes --import-format=NV12 testable on e.g. intel

We only set nv12_format_found to true if we found that format and at
least one understood modifier. Store modifier verbatim instead of using
a boolean flag. Last advertised and supported modifier currently wins.

The NV12 DRM_FORMAT_LINEAR image should be green in the upper left
corner and white in the lower right.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
2018-05-29 11:43:03 +03:00
Matt Hoosier
74742e0525 log: improve handling of use-before-init
Rather than segfaulting by attempting to traverse an initially
null log handler pointer, explicitly print a message and abort.

Signed-off-by: Matt Hoosier <matt.hoosier@gmail.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
[Pekka: coding style fix]
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
2018-05-28 16:38:05 +03:00
Guido Günther
577b346412 simple-dmabuf-drm: don't exit from create_display
Only exit from main so control flow is in one place.

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
2018-05-28 15:54:53 +03:00
Guido Günther
f7d035b28c simple-dmabuf-drm: drop superfluous declaration
variable is defined in simple-dmabuf-drm.h

Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
2018-05-28 15:54:53 +03:00
Guido Günther
bff906304f simple-dmabuf-drm: support etnaviv drm as well
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
2018-05-28 15:24:15 +03:00
Guido Günther
f9f5953b2d simple-dmabuf-drm: simplify fd_map_bo
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
2018-05-28 15:24:15 +03:00
Guido Günther
324cdf294d simple-dmabuf-drm: 0 is a valid fd (freedreno)
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
2018-05-28 15:24:15 +03:00
David Fort
029583e56e rdp-compositor: fix compilation against FreeRDP 2.0.0 rc2
The SURFACE_BITS_COMMAND struct has changed and some members have been moved in the
bmp field.

Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Tested-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
2018-05-28 14:47:07 +03:00
Pekka Paalanen
e0e39b66ed xwm: dump properties of type WINDOW
Very useful for TRANSIENT_FOR property debugging.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
2018-05-24 17:20:04 +03:00
Pekka Paalanen
b0a8317bcb xwm: dump properties of type CARDINAL
Add code to dump CARDINAL arrays from properties. Useful for debugging.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
2018-05-24 17:20:04 +03:00
Pekka Paalanen
c63acc4cb8 desktop-shell: survive NULL output in shell_configure_fullscreen()
Running 'weston-simple-egl -f -b' (fullscreen, unthrottled) caused a
crash in shell_ensure_fullscreen_black_view() due to
shsurf->fullscreen_output being NULL. Also shell_configure_fullscreen()
could crash on that condition.

Fix shell_configure_fullscreen() to bail out with minimal work if there
is no fullscreen_output.

It is unclear if anything will cause a reconfiguration when an output is
plugged in.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
2018-05-24 17:20:04 +03:00
Pekka Paalanen
87860c20ee desktop-shell: do not lower_fullscreen_layer(s, NULL)
In activate, do not call lower_fullscreen_layer() at all if the output
is NULL. It should not do anything in that case, per the existing
comment.

This is a tentative crash fix for a case where there are no enabled
weston_outputs at all.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
2018-05-24 17:20:04 +03:00
Pekka Paalanen
30aa59759a desktop-shell: handle NULL output in center_on_output()
This is a tentative crash fix for a case where there are no enabled
weston_outputs at all.

If no output is given, just put the surface at 0,0. At least it should
become mostly visible if an output is plugged in, if not centered.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
2018-05-24 17:20:04 +03:00
Pekka Paalanen
99372bab4c desktop-shell: handle NULL output in get_output_work_area()
This is a tentative crash fix for a case where there are no
enabled weston_outputs at all.

Let get_output_work_area() return a zero area if the given output is
NULL. If there is no output, there is no area. Unfortunately we cannot
return "no position" but have to use 0,0 instead.

In send_configure_for_surface(), this causes a maximized surface to
receive width=0 and height=0 in the configure event, which means the
client is free to choose the size. There is no correct size to send for
maximizing for no output.

In constrain_position(), this has no effect. The interactive move of a
surface is restricted to not go below the panel, so even if a user
managed to move a surface without an output, it just prevents the
surface moving beyond y=0.

In weston_view_set_initial_position(), get_output_work_area() will not
be called with NULL output anyway.

In set_maximized_position(), this makes it behave as if the output was
at 0,0 which is the default position of the first output.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
2018-05-24 17:20:04 +03:00
Pekka Paalanen
325ff4cba1 main: add setting for DRM/pixman shadow framebuffer
Allows to control the Pixman-renderer shadow framebuffer usage from
weston.ini. It defaults to enabled, and whether it is a good idea to
disable or not depends on the platform and the workload.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
2018-05-24 17:20:04 +03:00
Pekka Paalanen
dee412d174 compositor-drm: expose global shadow flag for pixman
Allow global control of the pixman shadow buffers. The compositor can
choose whether all output use or do not use a shadow buffer with the
pixman renderer.

The option is added to the end of struct weston_drm_backend_config to
avoid bumping WESTON_DRM_BACKEND_CONFIG_VERSION.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
2018-05-24 17:20:04 +03:00
Pekka Paalanen
26ded94aa0 pixman: make shadow buffer optional
Add a flag to pixman-renderer for initializing the output with a shadow
framebuffer. All backends were getting the shadow implcitly, so all
backends are modified to ask for the shadow explicitly.

Using a shadow buffer is usually beneficial, because read-modify-write
cycles (blending) into a scanout-capable buffer may be very slow. The
scanout framebuffer may also have reduced color depth, making blending
and read-back produce inferior results.

In some use cases though the shadow buffer might be just an extra copy
hurting more than it helps. Whether it helps or hurts depends on the
platform and the workload. Therefore let the backends control whether
pixman-renderer uses a shadow buffer for an output or not.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
2018-05-24 17:20:04 +03:00
Pekka Paalanen
acf50c3d96 pixman,drm: do not composite previous damage
Pixman-renderer uses a single internal shadow buffer. It is enough to
composite the current damage into shadow, but the copy to hw buffer
needs to include the previous damage because of double-buffering in
DRM-backend.

This patch lets pixman-renderer do exactly that without compositing also
the previous damage on DRM-renderer.

Arguably weston_output should not have field previous_damage to begin
with, because it implies double-buffering, which e.g. EGL does not
guarantee. It would be better for each backend explicitly always provide
any extra damage that should be copied to hw.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Ian Ray <ian.ray@ge.com>
2018-05-24 17:20:04 +03:00
Pekka Paalanen
944fae8887 libweston: fix output destroy signal list corruption
This issue was likely introduced by "libweston: add
weston_view_set_output()" which forgot to ensure the output destroy
listener is removed when weston_view is destroyed, leading to freed
memory being left into the list.

This was quite easy to trigger by opening and closing an application
window a few times, leading various memory corruption symptoms.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
2018-05-22 13:15:58 +03:00
Pekka Paalanen
99628000cb desktop-shell: fix output destroy signal list corruption
This issue was introduced by "desktop-shell: detect stale shell surface
outputs" which forgot to remove the output destroy listener when
shell_surface is destroyed, leading to memory corruption.

This was fairly easy to trigger by opening and closing an application
window a few times.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Ian Ray <ian.ray@ge.com>
2018-05-22 12:48:35 +03:00
Semi Malinen
99f8c08559 desktop-shell: detect stale shell surface outputs
When displays are hot (un)plugged, it may happen that
a shell surface is left with a stale pointer to an output
that has already been freed. Add an output destroy listener
to catch such situations and set the output pointer to NULL.

Signed-off-by: Semi Malinen <semi.malinen@ge.com>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
2018-05-21 16:51:05 +03:00
Semi Malinen
e7a52fbb7d libweston: add weston_view_set_output()
Instead of desktop shell assigning view outputs directly,
use a new method, weston_view_set_output(). The method can
set up an output destroy listener to make sure that views
do not have stale output pointers.

Without this patch it is possible to end up in a scenario
where, e.g. configure_static_view() accesses memory that
has already been freed. The scenario can be provoked by
repeatedly plugging and unplugging a display. The faulty
memory accesses are reported by valgrind.

Signed-off-by: Semi Malinen <semi.malinen@ge.com>
Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.com>
Reviewed-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
2018-05-18 13:50:21 +03:00
Pekka Paalanen
03dc95a131 weston: use wet.compositor consistently in main()
Rename user_data to wet, because it is called wet everywhere else.

Drop the local variable ec, because that is available as wet.compositor.

This models a little better that wet_compositor owns weston_compositor,
and not the other way around.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
2018-05-02 12:08:34 +03:00
Pekka Paalanen
3ffc6876ca weston: store weston_compositor in wet_compositor
This makes it easier to just pass wet_compositor around and take the
weston_compositor from it.

It feels weird to go from weston_compositor to wet_compositor all the
time in internal functions. It's necessary in callbacks that cannot
carry wet_compositor, but otherwise it is awkward.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
2018-05-02 12:08:34 +03:00
Pekka Paalanen
dfc0683ba0 compositor-drm: allow shared-CRTC cloning
Allow cloning up to 4 connectors from the same CRTC. All the
implementation bits support more than one head per output already.

Four is just an arbitary number, small but unlikely to ever be the
limiting factor in cloning since hardware is usually very restricted.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
2018-05-02 12:08:34 +03:00
Pekka Paalanen
d5f98d8932 compositor-drm: head attach requires a modeset
For the attach on an enabled output to have an effect, we need to go
through drmModeSetCrtc or ATOMIC_ALLOW_MODESET.

v9:
- Add another XXX comment.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
2018-05-02 12:08:34 +03:00
Pekka Paalanen
7f853799e2 compositor-drm: head detach requires a modeset
When a head is detached from an enabled output, that output needs to go
through a modeset (drmModeSetCrtc() / ATOMIC_ALLOW_MODESET) so that the
connector is actually removed from the CRTC.

This has not yet been a problem, because an output could only have one
head at a time, and would be automatically disabled on detach. It would
be a problem with clone mode.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
2018-05-02 12:08:34 +03:00
Pekka Paalanen
db4c7d7237 compositor-drm: preserve CRTC routing harder
If we are processing a connector that does not have an existing routing,
it is possible we pick a CRTC that was previously routed to a connector
we have not enabled yet. If that happens, the latter connector cannot
preserve its routing.

Check that no other connector we might enable later had this CRTC
before.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
2018-05-02 12:08:34 +03:00
Pekka Paalanen
27cc4816ae compositor-drm: rewrite crtc picking for clone mode
To support shared-CRTC clone mode, the chosen CRTC needs to support
driving all the attached connectors. Replace the old algorithm with a
new one that takes into account all associated connectors.

Ideally it should use possible_clones mask to check which encoders (and
therefore connectors) actually can be in a cloned set. However, the DRM
documentation says about possible_clones and possible_crtcs masks both:
"In reality almost every driver gets this wrong."
- https://01.org/linuxgraphics/gfx-docs/drm/gpu/drm-kms.html#c.drm_encoder

Looking at a target device and its kernel where clone mode is desired,
possible_clones is indeed self-conflicting and would not allow cloning
at all. Therefore the implemented algorithm replaces the checking of
possible_clones with luck. It even goes out of its way to find any CRTC
for a configuration, even if not advertised by the kernel as not
supported.

Libweston would need infrastructure to allow trial-and-error CRTC
allocation: rather than picking one CRTC in advance and do or die, it
should try all available CRTCs one by one. Unfortunately that is not yet
possible, so this patch implements what it can. It is also the DRM
upstream opinion that trial-and-error with ATOMIC_TEST would be the way
to go.

Unlike the old algorithm, the new algorithm prefers routings that were
in place when Weston started instead of when enabling an output. When
you never temporarily disable an output, this makes no difference.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
2018-05-02 12:08:34 +03:00
Louis-Francis Ratté-Boulianne
8549e16531 libweston: fix weston_touch_start_grab() arg name
compositor.c has 'touch', so use 'touch' here as well. It is not a
device to begin with.

Signed-off-by: Louis-Francis Ratté-Boulianne <lfrb@collabora.com>
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
2018-04-30 15:12:01 +03:00
Pekka Paalanen
1b043b16b5 libweston: unexport weston_{pointer,keyboard,touch}_{create,destroy}()
We have weston_seat_{init,release}_{pointer,keyboard,touch}() as the
backend-facing API. There is no need to expose the create/destroy
functions which have been for internal use only for quite a long time.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
v1 Tested-by: Matt Hoosier <matt.hoosier@gmail.com>
2018-04-30 15:11:43 +03:00
Pekka Paalanen
925788fc76 Update copyrights for Collabora and General Electric Company
Looking at the diff statistics of the changes authored by me and landed
since 4.0.0 release points out these files as having major changes.
Update the copyright holders accordingly, as both clone mode and
touchscreen calibration related patches are copyright both Collabora and
GE.

I have kept the redundant "Copyright ©" form only to keep things
consistent, even when either the word or the mark would be enough.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Acked-by: Ian Ray <ian.ray@ge.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
2018-04-26 16:55:03 +03:00
Pekka Paalanen
f39249ad58 tests: add test_seat_release() for symmetry
Add test_seat_release() as the counterpart of test_seat_init() instead
of open-coding it. This helps adding more code to test_seat_release()
later.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-04-20 15:27:54 +03:00
Pekka Paalanen
d61da83cb0 man: document WESTON_LIBINPUT_LOG_PRIORITY env
Commit c81c4241d9 added this environment
variable. Document it.

It applies also to the fbdev-backend but that has no man page.

v2:
- Rewording by Peter Hutterer.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-04-20 15:27:54 +03:00
Pekka Paalanen
1bbf58ff58 libinput: do not switch output associations on disable
If an input device is associated to an output that then gets disabled,
there is no case where associating to a different output would be
correct.

The output association is used for absolute positioned input devices,
and an input device like a touchscreen cannot ever be automatically
valid for more than one possible output - the touchscreen display
device.

Therefore do not automatically reassing implicitly associated input
devices to another output. This removes some log spam on shutdown.

In fact, if there can be more than one output at any time, absolute
input devices must be explicitly configured to associate with the
correct output, or the results are essentially undefined in any case.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-04-20 15:27:54 +03:00
Pekka Paalanen
8dc6db8c76 libweston: require connected heads for input devices
The use case driving this change is a clone mode setup, where the user
is hotplugging or unplugging a cloned touchscreen. Even if the output
and head are force-enabled, the touch device should still follow the
connector connection status. If there is no video signal for the
touchscreen (disconnected connector), then the touch input should be
ignored as well.

When the output is force-enabled, we need to trigger
output_heads_changed from connector status changes. If the head or
output are not force-enabled, the compositor will likely attach and
detach the head as appropriate. In clone mode, the attach or detach
needs to trigger output_heads_changed directly. In other cases, it may
be handled through the output getting enabled or disabled which are
different signals.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-04-20 15:27:54 +03:00
Pekka Paalanen
fd02efbc84 libinput: use head names for output matching
Associating input devices with weston_outputs by the output name fails
when one output has several heads. We need to match against head names
instead of output names to be able to find all names.

This fixes touchscreen output association in shared-CRTC clone mode when
outputs or input devices appear or disappear.

Even though notify_output_create() is called only when new outputs
appear, the implementation is prepared to also remove output
associations. This will be handy in the future when this function will
handle also head detaching from an output that remains enabled.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-04-20 15:27:54 +03:00
Pekka Paalanen
98d50cc311 libinput: allow evdev_device_set_output(dev, NULL)
Removing the output association from an evdev_device is more than just
setting the pointer to NULL, one also needs to remove the destroy
listener and flag the destroy listener as unused (notify == NULL).

evdev_device_set_output() can already remove associations, so let it
also handle an assignment to NULL output.

Fix notify_output_destroy() to handle removing an association correctly.
Previously, the listener was left "used", which would mean the next call
to evdev_device_set_output() would have wl_list_remove()'d, accessing
freed memory. This could be triggered by having a touchscreen with a
specified output association, and unplugging then re-plugging the
corresponding output.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-04-20 15:27:54 +03:00
Pekka Paalanen
018e6ade21 libinput: make setting the same output a no-op
In the future evdev_device_set_output() will start getting called more
often, redundantly. Short-circuit the setting if the chosen output is
already set for an input device. This reduces churn in the logs.

Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.co.uk>
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
2018-04-20 15:27:54 +03:00