Previously, desktop-shell would only create its internal shell_seat object
for each seat available when the desktop-shell module is loaded. This is a
problem any time seats are created dynamically. In particular, the Wayland
and RDP backends create seats on an as-needed basis and they weren't
getting picked up proprely by desktop-shell.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77649
lower_fullscreen_surface() was removing fullscreen surfaces from
the fullscreen layer and inserting them in the normal workspace
layer. However, those fullscreen surfaces were never put back in
the fullscreen layer, causing bugs such as unrelated surfaces
being drawn between a fullscreen surface and its black view.
Change the lower_fullscreen_surface() logic so that it lowers
fullscreen surfaces to the workspace layer *and* hides the
black views. Make this reversible by re-configuring the lowered
fullscreen surface: when it is re-configured, the black view
will be shown again and the surface will be restacked in the
fullscreen layer.
https://bugs.freedesktop.org/show_bug.cgi?id=73575https://bugs.freedesktop.org/show_bug.cgi?id=74221https://bugs.freedesktop.org/show_bug.cgi?id=74222
Ideally, we'll update the key event handling to deliver events to widgets,
but in the meantime, just blocking key event delivery while a grab is
active goes a long way.
If a client exists during a resize grab, the resource for the shell
surface being resized is destroyed. The shell surface is not destroyed
immediately, however, because of the window close animation. In that
case, the compositor would crash trying to send configure events to
the surface being resized, since it would pass a NULL pointer to
wl_resource_post_event().
The code for the resize grab was already able to handle the surface
going away, so expand it to also handle the resource going away and
fix the crash.
https://bugs.freedesktop.org/show_bug.cgi?id=77344
In order to do the window close animation, a reference for a destroyed
surface is kept. However, the reference count was also increased for
unmapped surfaces, in which case the animation wouldn't run. Since the
reference count was decremented in the animation done function, it would
never be decreased for unmapped surfaces, causing them to not be
released.
The close animation also changed how shell surfaces are released. The
destroy function for its resource was changed to not deallocate the
surface, and instead keep it around until the animation finishes and
the weston surface is destroyed. The destruction should happen in the
destroy listener for the weston surface, but it wouldn't destroy the
shell surface in the case the resource was still valid, assuming that
it would be freed in the resource destroy function.
This ensures the allocation results are checked for NULL (out of
memory), and terminates the program in such a case.
Signed-off-by: Bryce Harrington <b.harrington@samsung.com>
In order to apply the zoom transformation to the output matrix, Weston was
doing the following:
• Create a temporary matrix to hold the translation
• Invert the translation matrix using weston_matrix_invert into
another temporary matrix
• Scale that matrix by the scale factor
• Multiply the current matrix with the temporary matrix
Using weston_matrix_invert to invert a translation matrix is over the top.
Instead we can just negate the values we pass to weston_matrix_translate.
Matrix multiplication is associative so creating a temporary matrix to hold the
scale and translation transform should be equivalent to just applying them
directly to the output matrix.
It looks like the handler for frame events from the wl_touch interface for
widgets may have been erroneously copied from the cancel handler so that it
removes all handlers as they are processed. I don't think this makes much sense
for the frame event. This was stopping the panel icons from being pushable with
touch events when using libinput since commit 1679f232e5. All that commit
does it make it start sending the frame events.
Make sure that we don't map a device to an invalid output pointer and
intead remap devices when an output is created.
v2: fix the error with libinput too.
If the output a touchscreen is paired to is unplugged, events coming
from it should be ignored. Commit 17bccaed introduced logic for that
in evdev_flush_pending_damage(). However, the break statements it
introduced would cause the assertion after the switch statement to
fail.
That function has the odd behavior that goto's are used to skip the
assertion after the switch statement and jump to the hunk of code that
marks the event as processed. Only in the case where the event type has
an invalid value the assertion should trigger. So this patch fixes the
problem by moving the assertion into the default case of the switch
and replacing the goto statements with break ones.
https://bugs.freedesktop.org/show_bug.cgi?id=73950
Commit 17bccaed intended to make the events coming from a touchscreen
paired with an unplugged output to be discarded, while an unpaired one
would just choose a different output. However, the logic was inverted
causing the opposite to happen.
Later in commit 161c6c56, the default behavior was changed to map an
output to a default output if the one specified via udev is not
present. This change is reverted by this patch.
v2: undo the change from commit 161c6c56.
v3: deal with libinput too.
This fixes an issue in the pixman renderer where it would not render
surfaces correctly if both wl_viewport and wl_surface.set_buffer_transform
were used.
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Previously, because of the wrong width/height,
weston_surface_to_buffer_* would return the wrong values when
wl_viewport was used in combination with wl_surface.set_buffer_transform.
Reviewed-by: Pekka Paalanen <ppaalanen@gmail.com>
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Most zalloc calls in weston are checked, this fixes a handful that were
being ignored. As found by `grep -EIsr "[^x]zalloc\(" . -A1`
Signed-off-by: Bryce Harrington <b.harrington@samsung.com>
Previously we would only use the set background color if the
background-image value was explicitly set to empty or a non-existing
image. With this change, we only load the default background image
if there's no configure background image or background color. In case
of both an image and a color, the image takes precedence as before.
The rationale here is, that this line would create an instance of
gl_renderer_interface in every compilation unit that included
gl-renderer.h. This is not necessary, and it can actually be harmful by
masking the real exported gl_renderer_interface symbol, if you added
another compilation unit to gl-renderer.so, causing a runtime failure in
loading it.
gl-renderer.c already creates the exported symbol.
The editor will now insert new lines and tabulations when
pressing the corresponding keys on the virtual keyboard.
The Up and Down arrows can be used to navigate through
lines.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77496
Signed-off-by: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
If more than one input device maps to the new output, then we need
to map all devices to that output... not just the first device.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77576
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
If an input device wants to map to an output that does not
exist, then just map it to the first output.
Also, if a device is mapped to an output that gets unplugged then
it gets default mapped to the first output in the output destroy
listener. However, the original output destroy listener needs to
be removed before adding the new listener for the first output,
otherwise the list gets corrupted.
Later if the other output is plugged back in, we remap the device
to it. In that case, we should remove the destroy listener for
the first output.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77341
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
We need to break after handling LIBINPUT_EVENT_TOUCH_UP otherwise
we fall into the default case and end up logging that the event
is unknown and then return the wrong "handled" result.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77577
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
Look for WESTON_LIBINPUT_LOG_PRIORITY environment variable. If
it exists then use it to set the libinput log priority.
Otherwise, don't set the priority and get whatever libinput's
default priority is.
Setting WESTON_LIBINPUT_LOG_PRIORITY=0 allows us to log which
input devices are detected at Weston startup and makes it a
little more consistent with Weston's original evdev input setup
log messages... and useful for debugging and testing.
Signed-off-by: U. Artie Eoff <ullysses.a.eoff@intel.com>
We now dynamically move the input panel (i.e. virtual
keyboard) surface to the output containing the currently
focused surface.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=71015
Signed-off-by: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
Commit 58e15865 changed the parameters for udev_get_seat_by_name() to
receive a struct udev_input. However, when this gets called from
create_output_from_connector() during initialization, the input struct
is not yet initialized, leading to a crash. Previously, that function
would take only a pointer to the compositor.
This patch fixes the crash by initializing input before creating any
outputs.
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=77503
The "symbols" modifier key of weston-keyboard is no longer
inactive, but will provide an additionnal layout with
numerals and special characters.
Fix the Arabic keyboard, which was rendering out of the
bounds, and now use the Arabic IBM PC keyboard as a
reference for its standard and new symbols layouts.
https://bugs.freedesktop.org/show_bug.cgi?id=71757
Signed-off-by: Manuel Bachmann <manuel.bachmann@open.eurogiciel.org>
It is possible that an input panel will be shown quickly, hidden and
shown again, before the animation for the first appeareance finished.
In that case, another animation would be created and the effect of the
two combined could cause the panel to not appear in the screen.
This patch fixes this by keeping a reference to the previous animation
and deleting it when a new one is created.
The position for the slide animation was calculated assuming the value
of the spring was always between 0.0 and 1.0. Commit 3a869019 broke
that assumption, and the result was that the panel would be positioned
at an invisible part of screen. Since there would be no output repaints
scheduled, the result of the animation would only be seen if something
else triggered a repaint (such as a mouse cursor movement).
This patch changes the values for the slide animation's spring to range
between 0.0 and 1.0, thus fixing the position of the panel and the lack
of scheduled repaints problem.
https://bugs.freedesktop.org/show_bug.cgi?id=77347
All the animations override at least one parameter of the spring that
is set during the creation of the animation. Some need to do the whole
setup again.
This patch changes the initialization of a view animation to a three
step process. First, the animation is created. Then the caller sets up
the spring and calls weston_view_animation_run() to apply the effect of
the animation for the first animation frame.
bad-buffer-test is FAIL_TEST and every assert() (or even SIGSEGV signal)
make it pass. It shouldn't be so for example when assert() is invoked
when a client couldn't connect to display.
Make sure that only relevant asserts make the test pass
and the other make it fail (by returning 0)
We now carry the shell_client around with each shell_surface. This is much
more reliable than tacitly assuming that there is only one wl_shell or
xdg_shell instance bound to a particular wl_client. In particular, weston
would crash when a client bound to both wl_shell and xdg_shell even if it
only ever used one of them.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
It takes the stride in bytes, not pixels. The bug was hidden when using
va intel-driver 1.2.1 because it would ignore the stride from user and
set the surface state in a wrong way.
https://bugs.freedesktop.org/show_bug.cgi?id=77495
Previously, the repositioning logic would iterate the compositor's list
of layers and move the views on those layers. However, that failed in
two different ways: it didn't cover hidden workspaces and crashed when
the display was locked.
This patch changes the logic to explicit iterate over all the layers
owned by the shell. The iteration is done through a helper function,
shell_for_each_layer().
https://bugs.freedesktop.org/show_bug.cgi?id=76859https://bugs.freedesktop.org/show_bug.cgi?id=77290
