This changes the GL-renderer interface to pass the initial framebuffer
size and compositing area explicitly. All backends are changed to
provide the correct parameters.
GL-renderer mostly does not yet use these values, but later patches
will. The pbuffer path uses it already, because they replaced the
existing fields.
All this is to make GL-renderer aware of the different sizes, so it can
implement the future revision of the screenshooting API.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This will make sure that backends do not forget to tell us about
resizes.
composite_*() functions still read the size from the destination buffer,
because pixman_output_state is not available there.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
In a journey to decouple renderer from weston_output, pass the initial
framebuffer size to Pixman-renderer explicitly.
Now Pixman-renderer will never look into weston_output::current_mode.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is necessary if you want to resize a Pixman rendered output that
uses the shadow.
Also reset the current hw_buffer to NULL, because surely it needs to
change and we don't want to keep an old buffer live for no reason if
there happens to be one.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Previously renderers were not told when the output (framebuffer they
need to draw) size changed. Renderers just pulled that information out
from weston_output::current_mode when they happened to need it. This
makes some things awkward, like resizing the shadow or intermediate
buffers. In fact, Pixman-renderer does not even support resizing its
shadow buffer, nor does GL-renderer. DRM-backend has to destroy and
re-create the renderer output state anyway, but rdp, x11 and wayland
backends would be natural users of resizing API.
This commit adds an API for resizing with empty implementations. Actual
implementations will be added in following patches for each renderer
while moving parts of resizing code from backends into the renderers.
No-op renderer needs no implementation.
Only wayland-backend has actual resizing code already, and that is made
to call the new API. Unfortunately, Pixman and GL renderers differ: one
does not blit them while the other does. In order to assert the
functionality of each renderer to keep the API consistent,
wayland-backend needs to lie to pixman-renderer. That's not new, it
already does so in wayland_output_get_shm_buffer() where the 'pm_image'
addresses only the interior area instead of the whole buffer.
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
This is arguably a little nicer without calling the pixman functions
directly.
In the future when we have different datatypes for coordinates in different
spaces, this test will only be valid on global coordinates, so this change
is also a precursor to stronger type validation.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This was actually introduced as part of desktop zoom. We no longer have
use of it.
This makes a subtle functional change - the output's matrices will now be
up to date immediately in cases where previously that update could have
been deferred.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Except the module dir path, they're one and the same. This change
warrants a libweston version bump, if it hasn't been done already.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Rename weston_output_region_from_global to weston_region_global_to_output,
and also no longer modify in place.
Trying to make it look a little nicer, as well as making it easier to use
from other places that don't want modify in place semantics.
This becomes a very thin wrapper around weston_matrix_transform_region.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Replace all uses of weston_transform_region with
weston_matrix_transform_region, then remove the function completely.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Now that we have weston_matrix_transform_rect we can use that
instead of weston_transformed_coord + viewport_surface_to_buffer.
viewport_surface_to_buffer no longer has users, so remove it.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
New function that transforms a pixman_box32_t rectangle by a matrix.
Since pixman rectangles are represented by 2 corners, non-90 degree
rotations can't be properly represented. This function gives the
axis aligned rectangle that encloses the rotated rectangle.
We use this for weston_matrix_transform_region(), simplifying it and
allowing it to work for non 90 degree rotations.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
As seen previous times, with newer doxygen version we seem to be
generating warnings and with it to stop generating documentation
entirely as we have enabled warning as error in the doxygen
configuration file.
By default meson werror build option is not enabled, so users can still
generate documentation when building regularly, and when we'll update to
the same doxygen version we should be able to catch those errors up if
any of them will pile up in between.
Suggested-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Fixes the following warnings when building with _FORTIFY_SOURCE
and optimizations enabled:
../shared/xalloc.h:49:9: error: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
49 | write(STDERR_FILENO, oommsg, strlen(oommsg));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
or
../compositor/main.c:427:25: error: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
427 | write(STDERR_FILENO, fail_seteuid,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
428 | strlen(fail_seteuid));
| ~~~~~~~~~~~~~~~~~~~~~
../compositor/main.c:434:25: error: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
434 | write(STDERR_FILENO, fail_cloexec,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
435 | strlen(fail_cloexec));
| ~~~~~~~~~~~~~~~~~~~~~
../compositor/main.c:442:25: error: ignoring return value of ‘write’ declared with attribute ‘warn_unused_result’ [-Werror=unused-result]
442 | write(STDERR_FILENO, fail_exec, strlen(fail_exec));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
As clipboard_find_supported_format_by_mime_type() can return -1 if it
can't find out an index avoid trying to print outside of the array.
Fixes the following warnings triggered when enabling FORTIFY_SOURCE
combined with optimizations (-O)
../libweston/backend-rdp/rdpclip.c:1114:17: error: array subscript -1 is below array bounds of ‘uint32_t[5]’ {aka ‘unsigned int[5]’} [-Werror=array-bounds]
1114 | weston_log("RDP %s (%p:%s) specified format \"%s\" index:%d formatId:%d is not supported by client\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1115 | __func__, source, clipboard_data_source_state_to_string(source),
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1116 | mime_type, index, source->client_format_id_table[index]);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../libweston/backend-rdp/rdpclip.c:131:18: note: while referencing ‘client_format_id_table’
131 | uint32_t client_format_id_table[RDP_NUM_CLIPBOARD_FORMATS];
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Currently we can't tell the difference between a window intentionally
created at 0,0 and a window that we can place anywhere.
Check the size hints to see if the flags indicating the placement
is intentional are present.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
I added support to Meson for cc.get_supported_arguments() when I was
typing out the initial build because I didn't like the open-coding, then
completely forgot to update Weston when it got merged.
Signed-off-by: Daniel Stone <daniels@collabora.com>
As things are, even when mode=current is specified on the .ini file,
a full modeset is needed (and done), which causes a very noticeable
screen blinking. That is because setting the max_bpc on a connector
needs full modesetting.
The idea here is that if mode=current on the .ini, no modesetting
should be done, so the current max_bpc is programmed into the
connector.
But if a custom max-bpc=... is specified, that will be used instead,
even if mode=current on the .ini
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/660
Signed-off-by: vanfanel <redwindwanderer@gmail.com>
The supplied path for executing the shell client could contain potential
arguments and not only the binary itself. Specifying the platform either
by using an argument (-platform wayland) or using an environmental
variable (QT_QPA_PLATFORM) with clients written in Qt is for instance
an example on why this might be useful to have in.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
With commit 'Move libweston-desktop into libweston' we've moved out
libweston-desktop DSO into libweston. Move also the header to
libweston/desktop.
This removes removes the libweston-desktop pc file and bumps libweston
major version to 12.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Surface views that are not assigned to a layer are not going to be
rendered, and thus should not participate in determining the outputs the
surface is on.
There are other view properties that may determine if the view should be
considered in output_mask calculations, e.g., is_mapped, but checking
for this currently breaks tests. Such additional checks are left for
future fixes or reworkings of the view infrastructure.
Fixes#646
Signed-off-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
All these Doxygen configuration directives raise a deprecation warning
with Doxygen 1.9.5.
Since we have WARN_AS_ERROR = YES, this causes the build to fail.
Remove these deprecated directives.
I have checked the differences by first building from scratch without
this patch, and then building from scratch with this patch, and
in the latter builddir checking
$ diff -ru -x '*.md5' -x '*.pdf' ~/tmp/weston-doc-before doc
The only differences are the Doxygen config file and one .pickle file.
So it seems the generated docs are identical with Doxygen 1.9.1.
Fixes: https://gitlab.freedesktop.org/wayland/weston/-/issues/661
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
We have no guarantee that we can create a surface for the pointer at the
instant we receive a seat that will (probably eventually) need one.
Hold off until we receive an enter event before creating this - at that
point we know with certainty that wl_compositor is available, since we've
used it to create the surface that was entered.
Fixes#659
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Tracking correctly previous events shouldn't corrupt the surface destroy
signal list. This enforces that by ensuring that we wouldn't have
a .notify wl_listener still being set (which shouldn't happen if we do
eventually get a focus_in event that clears it out).
Suggested-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Rather than doing it with a local variable, track any previous events by
hanging it out of the x11 backend and use it to handle keymap notify
events.
In this way we avoid corrupting the surface destroy signal list, in
notify_keyboard_focus_out(), ultimately leading to a crash.
Fixes#649, #650
Suggested-by: Daniel Stone <daniel.stone@collabora.com>
Reported-by: Alexandros Frantzis <alexandros.frantzis@collabora.com>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
The planes in the plane_list must be sorted from largest zpos_max to smallest.
Currently the plane order is only correct when the planes are already ordered
and added starting with the smallest zpos_max. This works accidentally in most
cases because the primary plane is usually first and there is often only one
overlay plane or the zpos is sufficiantly configurable.
To fix this, insert a new plane before the first plane with a smaller zpos_max.
And if none is found, insert it at the end of the list.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
With commit 62ab6891db, 'clients/simple-egl: Handle buffer
scale and transform' we changed the way we resized the client, by
encapsulating the resize in update_buffer_geometry() function.
we didn't correct that when creating the EGL window, which might be
problematic if you attempt to start the window with different a
different state, like maximized.
Fixes 62ab6891db
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
If weston-simple-egl is run with the "-b" flag, it will attempt to set
the swap interval to 0 during create_surface. However, at that point, it
will not have made its EGLContext current yet, causing the
eglSwapInterval call to have no effect. To fix this, wait until the
EGLContext has been made current in init_gl before updating the swap
interval.
Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com>
We want atomic hotspot updates - this can't happen with
wl_pointer_set_cursor. So if we have a surface that already has a cursor
role, just update the hotspot when attaching new content.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This reverts commit 992ee045f1.
Recreating the surface for every cursor change causes flickering
cursors on some compositors, and is not the best way to achieve
atomic cursor updates
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This reverts commit f079f43658.
This only partially fixed a problem introduced in
992ee045f1
I'm reverting that commit in favor of a different fix, so this
broken fix needs to go first.
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
This properly handles transition states to, and from, maximized,
fullscreen, surface movement and resizing.
Specifically for surface movement and resizing we unset any
(previously set) tiled information we might have. The same happens for
maximized and fullscreen but additionally we attempt re-install the
orientation if we had one previously.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Patch adds KEY_UP/KEY_DOWN for tiled top and bottom positioning,
KEY_LEFT/KEY_RIGHT correspondingly, for left and right positioning.
It also modifies the man page to include these new bindings, But also with
commit 'compositor: Remove desktop zoom' we no longer have zoom effects
so removed them.
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
