- Thanks to Kirill "tcc -b itself" should work now
(was removed in d5f4df09ff)
Also:
- tests/Makefile:
- fix spurious --I from 767410b875
- lookup boundtest.c via VPATH (for out-of-tree build)
- test[123]b?: fail on diff error
- Windows: test3 now works (from e31579b076)
- abitest: a libtcc.a made by gcc is not usable for tcc
on WIndows - using source instead (libtcc.c)
- tccpe:
- avoid gcc warning (x86_64)
- Build libtcc1 for cross-compiler on arm (arm to X cross compilers)
- Install libtcc1 and includes for arm to i386 cross compiler
- Add basic check of cross-compilers (compile ex1.c)
- tccgen: error out for cast to void, as in
void foo(void) { return 1; }
This avoids an assertion failure in x86_64-gen.c, also.
also fix tests2/03_struct.c accordingly
- Error: "memory full" - be more specific
- Makefiles: remove circular dependencies, lookup tcctest.c from VPATH
- tcc.h: cleanup lib, include, crt and libgcc search paths"
avoid duplication or trailing slashes with no CONFIG_MULTIARCHDIR
(as from 9382d6f1a0)
- tcc.h: remove ";{B}" from PE search path
in ce5e12c2f9 James Lyon wrote:
"... I'm not sure this is the right way to fix this problem."
And the answer is: No, please. (copying libtcc1.a for tests instead)
- win32/build_tcc.bat: do not move away a versioned file
VLA storage is now freed when it goes out of scope. This makes it
possible to use a VLA inside a loop without consuming an unlimited
amount of memory.
Combining VLAs with alloca() should work as in GCC - when a VLA is
freed, memory allocated by alloca() after the VLA was created is also
freed. There are some exceptions to this rule when using goto: if a VLA
is in scope at the goto, jumping to a label will reset the stack pointer
to where it was immediately after the last VLA was created prior to the
label, or to what it was before the first VLA was created if the label
is outside the scope of any VLA. This means that in some cases combining
alloca() and VLAs will free alloca() memory where GCC would not.
I removed the XMM6/7 registers from the register list because they are not used
on Win64 however they are necessary for parameter passing on x86-64. I have now
restored them but not marked them with RC_FLOAT so they will not be used except
for parameter passing.
abitest now passes; however test1-3 fail in init_test. All other tests
pass. I need to re-test Win32 and Linux-x86.
I've added a dummy implementation of gfunc_sret to c67-gen.c so it
should now compile, and I think it should behave as before I created
gfunc_sret.
I expect that Linux-x86 is probably fine. All other architectures
except ARM are definitely broken since I haven't yet implemented
gfunc_sret for these, although replicating the current behaviour
should be straightforward.
Only one test so far, which fails on Windows (with MinGW as the native
compiler - I've tested the MinGW output against MSVC and it appears the
two are compatible).
I've also had to modify tcc.h so that tcc_set_lib_path can point to the
directory containing libtcc1.a on Windows to make the libtcc dependent
tests work. I'm not sure this is the right way to fix this problem.
Modified tcctest.c so that it uses 'double' in place of 'long double'
with MinGW since this is what TCC does, and what Visual C++ does. Added
an option -norunsrc to tcc to allow argv[0] to be set independently of
the compiled source when using tcc -run, which allows tests that rely on
the value of argv[0] to work in out-of-tree builds.
Also added Makefile rules to automatically update out-of-tree build
Makefiles when in-tree Makefiles have changed.
tests/Makefile:
- print-search-dirs when 'hello' fails
- split off hello-run
win32/include/_mingw.h:
- fix for compatibility with mingw headers
(While our headers in win32 are from mingw-64 and don't have
the problem)
tiny_libmaker:
- don't use "dangerous" mktemp
Also:
- fix "make tcc_p" (profiling version)
- remove old gcc flags:
-mpreferred-stack-boundary=2 -march=i386 -falign-functions=0
- remove test "hello" for Darwin (cannot compile to file)
tests:
- add "hello" to test first basic compilation to file/memory
- add "more" test (tests2 suite)
- remove some tests
tests2:
- move into tests dir
- Convert some files from DOS to unix LF
- remove 2>&1 redirection
win32:
- tccrun.c: modify exception filter to exit correctly (needed for btest)
- tcctest.c: exclude weak_test() (feature does not exist on win32)
* configure (fn_dirname): New.
Use it to ensure the creation of proper symlinks to Makefiles.
(config.mak): Define top_builddir and top_srcdir.
(CPPFLAGS): Be sure to find the headers.
* Makefile, lib/Makefile, tests/Makefile, tests2/Makefile: Adjust
to set VPATH properly.
Fix confusion between top_builddir and top_srcdir.
Just like with test[123] add their test[123]b variants. After previous 3
patchs all test pass here on Debian GNU/Linux on i385 with gcc-4.7 with
or without memory randomization turned on.
After 40a54c43 (Repair bounds-checking runtime), and in particular
5d648485 (Now btest pass!) `make test` was broken on ARCH != i386,
because I've changed btest to unconditionally run on all arches.
But bounds-checking itsels is only supported on i386 and oops...
Fix it.
Reported-by: Thomas Preud'homme <robotux@celest.fr>
Continuing d6072d37 (Add __builtin_frame_address(0)) implement
__builtin_frame_address for levels greater than zero, in order for
tinycc to be able to compile its own lib/bcheck.c after
cffb7af9 (lib/bcheck: Prevent __bound_local_new / __bound_local_delete
from being miscompiled).
I'm new to the internals, and used the most simple way to do it.
Generated code is not very good for levels >= 2, compare
gcc tcc
level=0 mov %ebp,%eax lea 0x0(%ebp),%eax
level=1 mov 0x0(%ebp),%eax mov 0x0(%ebp),%eax
level=2 mov 0x0(%ebp),%eax mov 0x0(%ebp),%eax
mov (%eax),%eax mov %eax,-0x10(%ebp)
mov -0x10(%ebp),%eax
mov (%eax),%eax
level=3 mov 0x0(%ebp),%eax mov 0x0(%ebp),%eax
mov (%eax),%eax mov (%eax),%ecx
mov (%eax),%eax mov (%ecx),%eax
But this is still an improvement and for bcheck we need level=1 for
which the code is good.
For the tests I had to force gcc use -O0 to not inline the functions.
And -fno-omit-frame-pointer just in case.
If someone knows how to improve the generated code - help is
appreciated.
Thanks,
Kirill
Cc: Michael Matz <matz@suse.de>
Cc: Shinichiro Hamaji <shinichiro.hamaji@gmail.com>
The intent is for 'make test' to pass cleanly on each platform, and thus easier
spotting of regressions. Linux is best supported by most tests running and
passing. Mac OSX passes mosts tests that do not make/link with binary files,
due to lack of mach-o file support.
!!! I have very limited knowledge of Windows platform, and cannot comment why
all tests(1) fail. I have posted to newsgroup asking for someone to test
Windows platform.
- tests/Makefile:
fix commit de54586d5b
This hunk it unrelated to the other changes (which are about MacOSX).
It is not useful and partially wrong. Optional tests are meant to
stay optional, btest would work only for i386
- tcc.h:
fix commit c52d79605a by unknown
The message says it's for MINTW but the patch has obviously
no effect for MINGW (which defines __GNUC__). However the patch
seems useful for MSC which however needs _strto(u)i64 with underscore.
- Makefile:
fix commit 5280293d6b
Do not build tcc.o with -DONE_SOURCE because we finally build tcc
from tcc.o and libtcc.a/so
Other tests still have issues, currently with weak linking.
One of the primary stumbling blocks on OSX is the lack of support for
mach-o binaries. Therefore all tcc usage on OSX has to be limited to elf
binaries, presumably produced by tcc itself.
Therefore I had to enable building of tiny_libmaker for OSX. Then changed
the make to use tcc and tiny_libmaker to compile the tcclib1.
In order to compile the tests, specifically the parts that use weak linking,
I have had to define MACOSX_DEPLOYMENT_TARGET to 10.2, which seems like a
hack, but extensive searching seems to indicate that this is the only way
to make apple gcc allow weak linking. Using any other value, bigger or smaller
breaks weak linking.
Also added _ANSI_SOURCE define required by some OSX headers, and some cosmetic
gitignore changes. I believe these changes should not impact other platforms.
Applied patch found on stackoverflow (link below). I also found some
related changes that looked like logically needed. The stackoverflow
changes addressed only two registers which were breaking a compile.
However reading the code in the same file shows two other register
accesses that, while not breaking the build, should have the same fix.
http://stackoverflow.com/questions/3712902/problems-compiling-tcc-on-os-x/3713144#3713144
The test driver was changed by changing 'cp -u' into 'cp' as '-u' is not
supported on mac osx.
I found that osx build required the WITHOUT_LIBTCC define. I suspect the
reason for this is tcc unability to handle mach-o files. In order to
properly address this I had to change 'configure' to propagate target os
name to Makefile.
Current state is that simple tests work, but not the whole 'make test'
suite runs.
To the best of my knowledge, these changes should not impact other
platforms.
86ffc48129
removed this cp command. However, it was necessary to pass tests on x86-64
because include/stdarg.h is different from GCC's definition on x86-64.
(Because GNU's alloca.h unconditionally #undef's alloca)
Also, remove gcc specific sections in headers. and
instead change tests such that gcc does not use them.
