We are now compatible with the 0.9,25 version though. A special
value for the second (ptr) argument is used to get the simple
behavior as with the 0.9.24 version.
The intent is for 'make test' to pass cleanly on each platform, and thus easier
spotting of regressions. Linux is best supported by most tests running and
passing. Mac OSX passes mosts tests that do not make/link with binary files,
due to lack of mach-o file support.
!!! I have very limited knowledge of Windows platform, and cannot comment why
all tests(1) fail. I have posted to newsgroup asking for someone to test
Windows platform.
Loads of VT_LLOCAL values (which effectively represent saved
addresses of lvalues) were done in VT_INT type, loosing the upper
32 bits. Needs to be done in VT_PTR type.
Sometimes the result of a comparison is not directly used in a jump,
but in arithmetic or further comparisons. If those further things
do a vswap() with the VT_CMP as current top, and then generate
instructions for the new top, this most probably destroys the flags
(e.g. if it's a bitfield load like in the example).
vswap() must do the same like vsetc() and not allow VT_CMP vtops
to be moved down.
This matters when sizeof is directly used in arithmetic,
ala "uintptr_t t; t &= -sizeof(long)" (for alignment). When sizeof
isn't size_t (as it's specified to be) this masking will truncate
the high bits of the uintptr_t object (if uintptr_t is larger than
uint).
This needs to be accepted:
typedef int foo;
void f (void) { foo: return; }
namespaces for labels and types are different. The problem is that
the block parser always tries to find a decl first and that routine
doesn't peek enough to detect this case. Needs some adjustments
to unget_tok() so that we can call it even when we already called
it once, but next() didn't come around restoring the buffer yet.
(It lazily does so not when the buffer becomes empty, but rather
when the next call detects that the buffer is empty, i.e. it requires
two next() calls until the unget buffer gets switched back).
When offsetted addresses of global non-static data are computed
multiple times in the same statement the x86_64 backend uses
gen_gotpcrel with offset, which implements an add insn on the
register given. load() uses the R member of the to-be-loaded
value, which doesn't yet have a reg assigned in all cases.
So use the register we're supposed to load the value into as
that register.
The first loop setting up struct arguments must not remove
elements from the vstack (via vtop--), as gen_reg needs them to
potentially evict some argument still held in registers to stack.
Swapping the arg in question to top (and back to its place) also
simplifies the vstore call itself, as not funny save/restore
or some "non-existing" stack elements need to be done.
Generally for a stack a vop-- operation conceptually clobbers
that element, so further references to it aren't allowed anymore.
Removes a premature optimization of char/short loads
rewriting the source type. It did so also for bitfield
loads, thereby removing all the shifts/maskings.
(cond ? 0 : ptr)->member wasn't handled correctly. If one arm
is a null pointer constant (which also can be a pointer) the result
type is that of the other arm.
- tests/Makefile:
fix commit de54586d5b
This hunk it unrelated to the other changes (which are about MacOSX).
It is not useful and partially wrong. Optional tests are meant to
stay optional, btest would work only for i386
- tcc.h:
fix commit c52d79605a by unknown
The message says it's for MINTW but the patch has obviously
no effect for MINGW (which defines __GNUC__). However the patch
seems useful for MSC which however needs _strto(u)i64 with underscore.
- Makefile:
fix commit 5280293d6b
Do not build tcc.o with -DONE_SOURCE because we finally build tcc
from tcc.o and libtcc.a/so
Other tests still have issues, currently with weak linking.
One of the primary stumbling blocks on OSX is the lack of support for
mach-o binaries. Therefore all tcc usage on OSX has to be limited to elf
binaries, presumably produced by tcc itself.
Therefore I had to enable building of tiny_libmaker for OSX. Then changed
the make to use tcc and tiny_libmaker to compile the tcclib1.
In order to compile the tests, specifically the parts that use weak linking,
I have had to define MACOSX_DEPLOYMENT_TARGET to 10.2, which seems like a
hack, but extensive searching seems to indicate that this is the only way
to make apple gcc allow weak linking. Using any other value, bigger or smaller
breaks weak linking.
Also added _ANSI_SOURCE define required by some OSX headers, and some cosmetic
gitignore changes. I believe these changes should not impact other platforms.
Applied patch found on stackoverflow (link below). I also found some
related changes that looked like logically needed. The stackoverflow
changes addressed only two registers which were breaking a compile.
However reading the code in the same file shows two other register
accesses that, while not breaking the build, should have the same fix.
http://stackoverflow.com/questions/3712902/problems-compiling-tcc-on-os-x/3713144#3713144
The test driver was changed by changing 'cp -u' into 'cp' as '-u' is not
supported on mac osx.
I found that osx build required the WITHOUT_LIBTCC define. I suspect the
reason for this is tcc unability to handle mach-o files. In order to
properly address this I had to change 'configure' to propagate target os
name to Makefile.
Current state is that simple tests work, but not the whole 'make test'
suite runs.
To the best of my knowledge, these changes should not impact other
platforms.
array_test is declared and called with no parameters but defined with
one parameter. Compilation succeed (definition is after the use so the
compiler consider the declaration) as well as link (the function exist
and has the right name) but running the test segfault on i386 platforms.
This patch moves the parameter to local variable. If the intention was
to call it with an array parameter then feel free to fix it again.
* Disable C99 VLA detection when alloca is unavailable and protect the
new reference to TOK_alloca in decl_initializer in order to compile
and run for architecture without working alloca.
Not all code of C99 VLA is commented as it would required many ifdef
stanza. Just the detection is commented so that VT_VLA is never set
any type and the C99 VLA code is compiled but never called. However
vpush_global_sym(&func_old_type, TOK_alloca) in decl_initializer needs
to be protected by an ifdef stanza as well because it uses TOK_alloca.
* include alloca and C99 VLA tests according to availability of
TOK_alloca instead of relying on the current architecture
Implement C99 Variable Length Arrays in tinycc:
- Support VLA with multiple level (nested vla)
- Update documentation with regards to VT_VLA
- Add a testsuite in tcctest.c
- add __builtin_va_arg_types to check how arguments were passed
- move most code of stdarg into libtcc1.c
- remove __builtin_malloc and __builtin_free
- add a test case based on the bug report
(http://www.mail-archive.com/tinycc-devel@nongnu.org/msg03036.html)
86ffc48129
removed this cp command. However, it was necessary to pass tests on x86-64
because include/stdarg.h is different from GCC's definition on x86-64.
- Fix a wrong calculation for size of struct
- Handle cases where struct size isn't multple of 8
- Recover vstack after memcpy for pushing struct
- Add a float parameter for struct_assign_test1 to check SSE alignment
configure and gcctestsuite.sh shell scripts contains bashisms although being
bourne shell script. This patch fixes the following bashisms:
* Use of $RANDOM variable (replaced by reading in /dev/urandom)
* Use == in tests instead of just =
* Use $[] for arithmetic computation istead of $(())
(Because GNU's alloca.h unconditionally #undef's alloca)
Also, remove gcc specific sections in headers. and
instead change tests such that gcc does not use them.
