Not able to generate ELF files on NetBSD yet (lacks the note and crt1.o
is actually named crt0.o on NetBSD), but -run works with these extra
defines:
-D__lint__ -D"__symbolrename(x)=asm(#x)" -D__NetBSD__
The -D__lint__ is an ugly hack, TCC should be able to emulate GCC just
fine, but it seems TCC doesn't support __builtin_va_list yet?
typedef __builtin_va_list __va_list;
/usr/include/sys/ansi.h:72: error: ';' expected (got "__va_list")
Refactoring (no logical changes):
- use memcpy in tccgen.c:ieee_finite(double d)
- use union to store attribute flags in Sym
Makefile: "CFLAGS+=-fno-strict-aliasing" basically not necessary
anymore but I left it for now because gcc sometimes behaves
unexpectedly without.
Also:
- configure: back to mode 100755
- tcc.h: remove unused variables tdata/tbss_section
- x86_64-gen.c: adjust gfunc_sret for prototype
Variants __fixsfdi/__fixxfdi are not needed for now because
the value is converted to double always.
Also:
- remove __tcc_fpinit for unix as it seems redundant by the
__setfpucw call in the startup code
- avoid reference to s->runtime_main in cross compilers
- configure: fix --with-libgcc help
- tcctok.h: cleanup
When statically linking, runtime library should be static as well. tcc
could link with libgcc.a but it's in a gcc version specific directory.
Another solution, followed by this patch, is to use libtcc.a when
statically linking, even if USE_LIBGCC was configured.
VLA storage is now freed when it goes out of scope. This makes it
possible to use a VLA inside a loop without consuming an unlimited
amount of memory.
Combining VLAs with alloca() should work as in GCC - when a VLA is
freed, memory allocated by alloca() after the VLA was created is also
freed. There are some exceptions to this rule when using goto: if a VLA
is in scope at the goto, jumping to a label will reset the stack pointer
to where it was immediately after the last VLA was created prior to the
label, or to what it was before the first VLA was created if the label
is outside the scope of any VLA. This means that in some cases combining
alloca() and VLAs will free alloca() memory where GCC would not.
- except for CONFIG_SYSROOT and CONFIG_TCCDIR
Strictly neccessary it is only for CONFIG_MULTIARCHDIR
because otherwise if it's in config.h it is impossible to
leave it undefined.
But it is also nicer not to use these definitions for
cross-compilers.
- Also:
lib/Makefile : include ../Makefile for CFLAGS
lib/libtcc1.c : fix an issue compiling tcc with tcc on x64
- add quotes: eval opt=\"$opt\"
- use $source_path/conftest.c for OOT build
- add fn_makelink() for OOT build
- do not check lddir etc. on Windows/MSYS
- formatting
config-print.c
- rename to conftest.c (for consistency)
- change option e to b
- change output from that from "yes" to "no"
- remove inttypes.h dependency
- simpify version output
Makefile:
- improve GCC warning flag checks
tcc.h:
- add back default CONFIG_LDDIR
- add default CONFIG_TCCDIR also (just for fun)
tccpp.c:
- fix Christian's last warning
tccpp.c: In function ‘macro_subst’:
tccpp.c:2803:12: warning: ‘*((void *)&cval+4)’ is used uninitialized
in this function [-Wuninitialized]
That the change fixes the warning doesn't make sense but anyway.
libtcc.c:
- tcc_error/warning: print correct source filename/line for
token :paste: (also inline :asm:)
lddir and multiarch logic still needs fixing.
tests:
- add "hello" to test first basic compilation to file/memory
- add "more" test (tests2 suite)
- remove some tests
tests2:
- move into tests dir
- Convert some files from DOS to unix LF
- remove 2>&1 redirection
win32:
- tccrun.c: modify exception filter to exit correctly (needed for btest)
- tcctest.c: exclude weak_test() (feature does not exist on win32)
* configure (fn_dirname): New.
Use it to ensure the creation of proper symlinks to Makefiles.
(config.mak): Define top_builddir and top_srcdir.
(CPPFLAGS): Be sure to find the headers.
* Makefile, lib/Makefile, tests/Makefile, tests2/Makefile: Adjust
to set VPATH properly.
Fix confusion between top_builddir and top_srcdir.
Evaluate configure arguments to reproduce autotools behavior. Autotools
actually only expands a few variable and do it at make time but it makes
the change much simpler.
This changeset attempts to fix a few problems when giving using
the high 32bits of a 64bit section offset. There are likely more
issues (or perhaps regressions) lurking in the muck here. In general,
this moves a few data type declarations to use uplong. Also, add
support for 64bit mingw32 building under cygwin. Because native
types are used for 64 bit offsets, this won't fix challenges with
cross compiling from 32bit -> 64bit.
Tested under cygwin, against binary compiled with
-Wl,-Ttext=0xffffff8000000000
Signed-off-by: Andrew Mulbrook <andrew262@gmail.com>
Applied patch found on stackoverflow (link below). I also found some
related changes that looked like logically needed. The stackoverflow
changes addressed only two registers which were breaking a compile.
However reading the code in the same file shows two other register
accesses that, while not breaking the build, should have the same fix.
http://stackoverflow.com/questions/3712902/problems-compiling-tcc-on-os-x/3713144#3713144
The test driver was changed by changing 'cp -u' into 'cp' as '-u' is not
supported on mac osx.
I found that osx build required the WITHOUT_LIBTCC define. I suspect the
reason for this is tcc unability to handle mach-o files. In order to
properly address this I had to change 'configure' to propagate target os
name to Makefile.
Current state is that simple tests work, but not the whole 'make test'
suite runs.
To the best of my knowledge, these changes should not impact other
platforms.
- use {B} to substitute tcc_lih_path (instead of \b)
- expand CONFIG_TCC_CRTPREFIX in CONFIG_TCC_LIBPATHS
which fixes duplicate CONFIG_SYSROOT.
- put default CONFIG_SYSROOT ("") into tcc.h
- remove hack from commit db6fcce78f
because $(tccdir)/include is already in sysincludes
- configure: error out for unrecognized options.
- win32/build-tcc.bat: put libtcc into base dir where it will
find lib/include automatically, and build libtcc_test example.
--sysincludepaths=.. specify system include paths, colon separated"
Sets CONFIG_TCC_SYSINCLUDEPATHS
--libpaths=... specify system library paths, colon separated"
Sets CONFIG_TCC_LIBPATHS
--crtprefix=... specify location of crt?.o"
Sets CONFIG_TCC_CRTPREFIX
--elfinterp=... specify elf interpreter"
Sets CONFIG_TCC_ELFINTERP
Also the CONFIG_TCC_XXX were renamed to make them look
more consistent.
Also move the elf_interp definitions to tcc.h.
Add a --multiarch-triplet switch to configure. The switch will allow
files to be search for each default path in path/<triplet> and then
path.
Default paths handled that way:
- CONFIG_TCC_SYSINCLUDE_PATHS
- CONFIG_TCC_LIBPATH
- path to crt*.o
- path to libgcc_s.so.1
Path missing: elf interpreter path (will be handled in another commit)
By default, tcc search libraries in /lib and /usr/local/lib while crt*.o
files are searched in /usr/lib and ld.so is searched in /lib.
Unfortunetely the path are hardcoded in source code. This patch allow
tcc to look in an other directory and also to look in extra directories.
It's then possible to make tcc search libraries in /lib/x86_64-linux-gnu
and /usr/local/lib/x86_64-linux-gnu while crt*.o files are searched in
/usr/lib/x86_64-linux-gnu and ld.so is searched in
/lib/x86_64-linux-gnu.
* Set CFLAGS entirely in configure if not already set.
* Compile bcheck.c with the same flags as the other source files
* Don't strip binaries by default (GB are cheap now) but provide a
--strip-binaries option in configure script.
