For tracking if asm symbols are connected with a C symbol,
and if asm symbols need to be global use new flags, instead of
reusing dllimport/dllexport, which would cause unrequested exported
entries on Windows.
This is a stop-gap until the C and asm symtable are unified.
See testcase. The C and asm symtab are still separate,
but integrated tighter: the asm labels are only synched at file
end, not after each asm snippet (this fixes references from one
to another asm block), the C and asm syms are synched both ways,
so defining things in asm and refering from C, or the other way
around works. In effect this model reflects what happens with
GCC better.
For this the asm labels aren't using the C label namespace anymore,
but their own, which increases the size of each TokenSym by a pointer.
one some systems GCC defaults to PIC/PIE code which is incompatible
with a unannotated asm call to a function (getenv here). TCC doesn't
support these PIC annotations (yet), so play some pre-processor games.
while last change fixed one part of label behaviour (undefined ones
must be global) it again broke a different aspect (forward defs
without .globl must stay local). This fixes both aspects.
That a label is local instead of global is difficult to test without
resorting to look at the symbol table or using two-file testcases,
so we do without. In essence the local/global-ness of symbols
should be the same between GAS and TCC for this input:
.globl glob1
glob1:
call glob1
.globl glob2
call glob2
glob2:
glob3:
.globl glob3
call glob3
glob4:
call glob4
.globl glob4
call glob5
.globl glob5
glob5:
call glob6
glob6:
.globl glob6
locl1:
call locl1
call locl2
locl2:
unref1:
unref2:
.globl unref2
.globl unref3
unref3:
call undef
fixes the problem in the testcase. A symbolic reference
from asm, which remains undefined at the end of processing is
always a global reference, not a static (STB_LOCAL) one.
This also affected the linux kernel.
This properly fixes what 870271ea tried to fix. Absolute memory
references can't use %rip relative addressing, and additionally,
if the address doesn't fit 32bit (signed) it must be loaded via
movabs. No good testcase added, it would require catching signals
and still be unreliable.
This reverts commit 870271ea07.
The commit is broken, you can't unconditionally emit a PC-relative
relocation without a symbol. And if there's a symbol the addend
need to be in the relocation, not the section.
win32/Makefile ("for cygwin") removed
- On cygwin, the normal ./configure && make can be used with either
cygwin's "GCC for Win32 Toolchain"
./configure --cross-prefix=i686-w64-mingw32-
or with an existing tcc:
./configure --cc=<old-tccdir>/tcc.exe
tcctest.c:
- exclude test_high_clobbers() on _WIN64 (does not work)
tests2/95_bitfield.c:
- use 'signed char' for ARM (where default 'char' is unsigned)
tests:
- remove -I "expr" diff option to allow tests with
busybox-diff.
libtcc.c, tcc.c:
- removed -iwithprefix option. It is supposed to be
combined with -iprefix which we don't have either.
tccgen.c:
- fix assignments and return of 'void', as in
void f() {
void *p, *q;
*p = *q:
return *p;
}
This appears to be allowed but should do nothing.
tcc.h, libtcc.c, tccpp.c:
- Revert "Introduce VIP sysinclude paths which are always searched first"
This reverts commit 1d5e386b0a.
The patch was giving tcc's system includes priority over -I which
is not how it should be.
tccelf.c:
- add DT_TEXTREL tag only if text relocations are actually
used (which is likely not the case on x86_64)
- prepare_dynamic_rel(): avoid relocation of unresolved
(weak) symbols
tccrun.c:
- for HAVE_SELINUX, use two mappings to the same (real) file.
(it was so once except the RX mapping wasn't used at all).
tccpe.c:
- fix relocation constant used for x86_64 (by Andrei E. Warentin)
- #ifndef _WIN32 do "chmod 755 ..." to get runnable exes on cygwin.
tccasm.c:
- keep forward asm labels static, otherwise they will endup
in dynsym eventually.
configure, Makefile:
- mingw32: respect ./configure options --bindir --docdir --libdir
- allow overriding tcc when building libtcc1.a and libtcc.def with
make XTCC=<tcc program to use>
- use $(wildcard ...) for install to allow installing just
a cross compiler for example
make cross-arm
make install
- use name <target>-libtcc1.a
build-tcc.bat:
- add options: -clean, -b bindir
Currently tcc doesn't have a compile-time config indicating that the target
is freebsd, and as a result, the tcc binary adds freebsh stuff to elf headers
if the compile-time (of tcc) *host* is freebsd.
Test also that the target is not PE while generating an elf header.
This still likely fails (but untested) when tcc targets other non-freebsd
systems on a freebsd system, but for now fix it only when targetting windows.
add some features for more complete 'long' support
tcc.h:
- use LONG_SIZE=4/8 instead of TCC_LONG_ARE_64_BIT
tccgen.c:
- add ptrdiff_type, update size_type
- support shift and ?: operations
- support long enum types
- display 'long' from type_to_str
- nwchar_t is unsigned short on windows
- unrelated: use memcpy in init_putv for long doubles to avoid
random bytes in the image (if tcc was compiled by gcc) for
diff purposes.
tccpp.c:
- make parse_number return correct types
- improve multi-character-constants 'XX' 'abcd'
Changelog:
- update
Dereferencing of absolute pointers is broken on x86_64, eg:
*(int*)NULL does not segfault but returns -4 instead
*(char*)(-10L << 20) does not return 0x55 (vsyscall page, push rbp)
The code generated for "((void (*)(void))0x12345678)()" will be a single "CALL 0x12345678" in previous code.
However, this will not work for DLLs, because "CALL imm" is PC related, DLL relocation will break the code.
This commit fixed the problem by forcing TCC generates indirect CALLs in this situation.
AL/AX should be extended to EAX when calling functions. However, the previous code did this only for direct calls, indirect calls were ignored.
New code also avoid redundant code when generating JMP instruction. (i.e. expanding code should be generated with CALL instruction only)
This commit fixed the problem that TCC directly cast each byte in wide string literal to wchar_t, which is wrong when wide string literal contains real wide chars.
It fixed the problem by assuming input charset is UTF-8, and wchar_t stores wide chars in UTF-16 (Windows) or UTF-32 (others).
The UTF-8 decoder is coded according to The Unicode Standard Version 10.
Too simple long parsion.
Take me a long long long time to see my mistake,
Sorry
(long long long wasn't see as an error)
This reverts commit a4cd2805f9.
As long is now a qualifier, and because compare_type will notice
that variables are not the same type, we can't use long as int anymore.
So, I've redefine __SIZE_TYPE__ as unsigned int and __PTRDIFF_TYPE__ as int.
tccgen.c:
doubles need to be aligned, on ARM. The section_reserve()
in init_putv does not do that.
-D ONE_SOURCE: is now the default and not longer needed. Also,
tcc.h now sets the default native target. These both make
compiling tcc simple as "gcc tcc.c -o tcc -ldl" again.
arm-asm.c:
enable pseudo asm also for inline asm
tests/tests2/Makefile:
disable bitfield tests except on windows and x86_64
and don't generate-always
tcc.c:
fix a loop with -dt on errors
configure:
print compiler version (as recognized)
tccpp.c:
actually define symbols for tcc -dt
clear static variables (needed for -dt or libtcc usage)
96_nodata_wanted.c:
use __label__ instead of asm
lib/files:
use native symbols (__i386__ etc.) instead of TCC_TARGET_...
* check that _Generic don't match unsigned char * with char *
this case is usefull as with -funsigned-char, 'char *' are unsigned
* change VT_LONG so it's now a qualifier
VT_LONG are never use for code generation, but only durring parsing state,
in _Generic we need to be able to make diference between
'long' and 'long long'
So VT_LONG is now use as a type qualifier, it's old behaviour is still
here, but we can keep trace of what was a long and what wasn't
* add TOK_CLONG and TOK_CULONG
tcc was directly converting value like '7171L' into TOK_CLLONG or
TOK_CINT depending of the machine architecture.
because of that, we was unable to make diference between a long and a
long long, which doesn't work with _Generic.
So now 7171L is a TOK_CLONG, and we can handle _Generic properly
* check that _Generic can make diference between long and long long
* uncomment "type match twice" as it should now pass tests on any platforms
* add inside_generic global
the point of this variable is to use VT_LONG in comparaison only
when we are evaluating a _Generic.
problem is with my lastest patchs tcc can now make the diference between
a 'long long' and a 'long', but in 64 bit stddef.h typedef uint64_t as
typedef signed long long int int64_t and stdint.h as unsigned long int, so tcc
break when stdint.h and stddef.h are include together.
Another solution woud be to modifie include/stddef.h so it define uint64_t as
unsigned long int when processor is 64 bit, but this could break some
legacy code, so for now, VT_LONG are use only inside generc.
* check that _Generic parse first argument correctly
* check that _Generic evaluate correctly exresion like "f() / 2"
* -dt now with lowercase t
* test snippets now separated by real preprocessor statements
which is valid C also for other compilers
#if defined test_xxx
< test snippet x >
#elif defined test_yyy
< test snippet y >
#elif ...
#endif
* simpler implementation, behaves like -run if no 'test_...' macros
are seen, works with -E too
* for demonstration I combined some of the small tests for errors
and warnings (56..63,74) in "60_errors_and_warnings.c"
Also:
* libtcc.c:
put tcc_preprocess() and tcc_assemble() under the setjmp clause
to let them return to caller after errors. This is for -dt -E.
* tccgen.c:
- get rid of save/restore_parse_state(), macro_ptr is saved
by begin_macro anyway, now line_num too.
- use expr_eq for parsing _Generic's controlling_type
- set nocode_wanted with const_wanted. too, This is to keep
VT_JMP on vtop when parsing preprocessor expressions.
* tccpp.c: tcc -E: suppress trailing whitespace from lines with
comments (that -E removes) such as
NO_GOTPLT_ENTRY,\t /* never generate ... */
The existing variable 'nocode_wanted' is now used to control
output of static data too. So...
(nocode_wanted == 0)
code and data (normal within functions)
(nocode_wanted < 0)
means: no code, but data (global or static data)
(nocode_wanted > 0)
means: no code and no data (code and data suppressed)
(nocode_wanted & 0xC0000000)
means: we're in declaration of static data
Also: new option '-dT' to be used with -run
tcc -dT -run file.c
This will look in file.c for certain comment-boundaries:
/*-* test-xxx: ...some description */
and then for each test below run it from memory. This way
various features and error messages can be tested with one
single file. See 96_nodata_wanted.c for an example.
Also: tccgen.c: one more bitfield fix
tccpp.c:
* #pragma comment(option,"-some-option")
to set commandline option from C code. May work only
for some options.
libtcc.c:
* option "-d1..9": sets a 'g_debug' global variable.
(for development)
tests2/Makefile:
* new make targets: tests2.37 / tests2.37+
run single test from tests2, optionally update .expect
* new variable GEN-ALWAYS to always generate certain .expects
* bitfields test
tccgen.c:
* bitfields: fix a bug and improve slightly more
* _Generic: ignore "type match twice"
