Add tcc.c as a prerequesite of the %-tcc$(EXESUF) target and compile $<
instead of tcc.c to make sure tcc.c is search in directories specified
by VPATH.
Favor ARM hardfloat over ARM softfloat calling convention. In
particular, this solve the problem of the raspbian distribution where
the softfloat ld.so pathname (lib/ld-linux.so.3) is actually a symlink
to the hardfloat ld.so pathname (/lib/arm-linux-gnueabihf/ld-2.13.so).
This commit revert commit 061b5799cc and
subsequent commits to detect whether -Wno-unused-result is supported or
not by the compiler used to compile tcc. No warning about unused results
is issued in a normal build and thus this switch is only needed if
calling make with extra switches in CFLAGS or CPPFLAGS. It should thus
be added with the extra switches when calling make and not in the
Makefile.
- Creates release tarball from *current* git branch
- Includes tcc-doc.html
- converts important windows files files to CRLF
(requirement for the cmd.exe batch processor, convenience for
reading the txt in notepad)
* configure (fn_dirname): New.
Use it to ensure the creation of proper symlinks to Makefiles.
(config.mak): Define top_builddir and top_srcdir.
(CPPFLAGS): Be sure to find the headers.
* Makefile, lib/Makefile, tests/Makefile, tests2/Makefile: Adjust
to set VPATH properly.
Fix confusion between top_builddir and top_srcdir.
TCC_ARM_EABI should be defined when compiling with hardfloat calling
convention. This commit rework the Makefile to distinguish between
calling convention and multiarch and define TCC_ARM_EABI when hardfloat
calling convention is used. The result is to first guess the calling
convention and then add the multiarch triplet if necessary.
This option does not exist in gcc 4.3 and earlier, and it breaks the build on
systems with older compilers. The makefile has been enhanced to test for the
version and adds it only if a newer compiler is detected.
Source fortification now works correctly : it compiles without warning
except unused result and the resulting tcc is working fine. Hence let's
stop disabling source fortification and hide unused result instead.
Arm hardfloat variant uses a different ABI than arm and uses thus a
different multiarch directory for headers and libraries. This commit
detect whether the system uses the hardfloat variant and configure the
multiarch directory accordingly.
The tests are taken almost verbatim from the open source project PicoC. It can
be found at https://code.google.com/p/picoc/.
The tests range from very simple/trivial ones to more complicated. My view is
that the more tests the better. Without tests like this I was very reluctant to
make any changes to tcc for the fear of breaking things.
The tests pass on Win32, OSX, Linux x86 and x86_64. One or two tests fail on
each platform due to differences in the runtime library.
When using gcc compiler (as opposed to llvm) to build 32 bit tcc, compiler flags
-mpreferred-stack-boundary=2, -march=i386 and -falign-functions=2 were being
used. -march is redundant as -m32 is already being used. The other two seem to
be corrupting stack. I am not sure why this is the case, as the explanation of
the flags states that only running code size should be affected, but it does.
I think that is is safe to remove these flags altogether for all compilers and
platforms, especially since they are not being used for 64 bit builds. However
I do not want to apply such wide change without agreement from the people on the
mailing list.
* Add multiarch directories for arm and i386
* Fix detection of biarch: /lib64/ld-linux-x86-64.so.2 is mandated by
ABI and is thus always present, even if there is no biarch
* Define CONFIG_LDDIR directly with the right value in case of multiarch
instead of defining it to /lib and then redifining it.
- tests/Makefile:
fix commit de54586d5b
This hunk it unrelated to the other changes (which are about MacOSX).
It is not useful and partially wrong. Optional tests are meant to
stay optional, btest would work only for i386
- tcc.h:
fix commit c52d79605a by unknown
The message says it's for MINTW but the patch has obviously
no effect for MINGW (which defines __GNUC__). However the patch
seems useful for MSC which however needs _strto(u)i64 with underscore.
- Makefile:
fix commit 5280293d6b
Do not build tcc.o with -DONE_SOURCE because we finally build tcc
from tcc.o and libtcc.a/so
Other tests still have issues, currently with weak linking.
One of the primary stumbling blocks on OSX is the lack of support for
mach-o binaries. Therefore all tcc usage on OSX has to be limited to elf
binaries, presumably produced by tcc itself.
Therefore I had to enable building of tiny_libmaker for OSX. Then changed
the make to use tcc and tiny_libmaker to compile the tcclib1.
In order to compile the tests, specifically the parts that use weak linking,
I have had to define MACOSX_DEPLOYMENT_TARGET to 10.2, which seems like a
hack, but extensive searching seems to indicate that this is the only way
to make apple gcc allow weak linking. Using any other value, bigger or smaller
breaks weak linking.
Also added _ANSI_SOURCE define required by some OSX headers, and some cosmetic
gitignore changes. I believe these changes should not impact other platforms.
This changeset attempts to fix a few problems when giving using
the high 32bits of a 64bit section offset. There are likely more
issues (or perhaps regressions) lurking in the muck here. In general,
this moves a few data type declarations to use uplong. Also, add
support for 64bit mingw32 building under cygwin. Because native
types are used for 64 bit offsets, this won't fix challenges with
cross compiling from 32bit -> 64bit.
Tested under cygwin, against binary compiled with
-Wl,-Ttext=0xffffff8000000000
Signed-off-by: Andrew Mulbrook <andrew262@gmail.com>
to the appropriate CFLAGS. In addition, memory hooks are very different
on OSX, so build of bcheck.c had to be disabled for now.
Change of the CFLAGS does affect builds on other platforms, and this needs
to be tested.
Applied patch found on stackoverflow (link below). I also found some
related changes that looked like logically needed. The stackoverflow
changes addressed only two registers which were breaking a compile.
However reading the code in the same file shows two other register
accesses that, while not breaking the build, should have the same fix.
http://stackoverflow.com/questions/3712902/problems-compiling-tcc-on-os-x/3713144#3713144
The test driver was changed by changing 'cp -u' into 'cp' as '-u' is not
supported on mac osx.
I found that osx build required the WITHOUT_LIBTCC define. I suspect the
reason for this is tcc unability to handle mach-o files. In order to
properly address this I had to change 'configure' to propagate target os
name to Makefile.
Current state is that simple tests work, but not the whole 'make test'
suite runs.
To the best of my knowledge, these changes should not impact other
platforms.
- use {B} to substitute tcc_lih_path (instead of \b)
- expand CONFIG_TCC_CRTPREFIX in CONFIG_TCC_LIBPATHS
which fixes duplicate CONFIG_SYSROOT.
- put default CONFIG_SYSROOT ("") into tcc.h
- remove hack from commit db6fcce78f
because $(tccdir)/include is already in sysincludes
- configure: error out for unrecognized options.
- win32/build-tcc.bat: put libtcc into base dir where it will
find lib/include automatically, and build libtcc_test example.
--sysincludepaths=.. specify system include paths, colon separated"
Sets CONFIG_TCC_SYSINCLUDEPATHS
--libpaths=... specify system library paths, colon separated"
Sets CONFIG_TCC_LIBPATHS
--crtprefix=... specify location of crt?.o"
Sets CONFIG_TCC_CRTPREFIX
--elfinterp=... specify elf interpreter"
Sets CONFIG_TCC_ELFINTERP
Also the CONFIG_TCC_XXX were renamed to make them look
more consistent.
Also move the elf_interp definitions to tcc.h.
This allows passing colon separated paths to
tcc_add_library_path
tcc_add_sysinclude_path
tcc_add_include_path
Also there are new configure variables
CONFIG_TCC_LIBPATH
CONFIG_TCC_SYSINCLUDE_PATHS
which define the lib/sysinclude paths all in one and can
be overridden from configure/make
For TCC_TARGET_PE semicolons (;) are used as separators
Also, \b in the path string is replaced by s->tcc_lib_path
(CONFIG_TCCDIR rsp. -B option)
This was already possible using
make NOTALLINONE=1
and is now the default.
To build as previously from one big source, use
make ONE_SOURCE=1
Cross compilers are still build from one source because using
separate objects requires separate build directories one per
platform which currently is not (yet) supported by the makefile.
We could probably use gnu-makeish target variables like
$(I386_CROSS): OUTDIR=build/i386
$(X64_CROSS): OUTDIR=build/x86-64
and so on ...
Also NEED_FLOAT_TYPES for arm-gen is removed. It was about
variables that are referenced from outside (libtcc, tccgen).
We could declare them in tcc.h (as with reg_classes) or have
them twice in arm-gen.c. I chose option 2.
Use @BINDIR@ in shebang of examples to put the right path on the target
system. That is, use #!/usr/local/bin/tcc if tcc is installed in /usr/local/bin
and #!/usr/bin/tcc if tcc is installed in /usr/bin/tcc.
* Set CFLAGS entirely in configure if not already set.
* Compile bcheck.c with the same flags as the other source files
* Don't strip binaries by default (GB are cheap now) but provide a
--strip-binaries option in configure script.