Revert commit 891dfcdf3f since it assumes
*all* architectures supported by tcc have GOT offsets aligned on 2. A
rework of this commit is being done since without it all PLT entries
grow by 4 bytes.
Since commit c6630ef92a, Call to a veneer
when the final symbol to be reached is thumb is made through a blx
instruction. This is a mistake since veneers are ARM instructions and
should thus be called with a simple bl. This commit prevent the bl ->
blx conversion when a veneer is used.
Generate PLT thumb stub for an ARM PLT entry only when at least one
Thumb instruction branches to that entry.
Warning: To save space, this commit reuses the bit 0 of entries of
got_offsets array. The GOT offset is thus saved in a 31 bit value.
Make sure to divide by 2 (right shift by 1) an offset before storing it
there and conversely to multiply the value by 2 (left shift by 1) before
using it.
Add support for relocations R_ARM_THM_JUMP24 and R_ARM_THM_CALL. These
are encountered with gcc when compiling for armv6 or greater with
-mthumb flag and a call (conditional or not) is done.
Introduce ARM version for the target architecture in order to determine
if blx instruction can be used or not. Availability of blx instruction
allows for more scenarii supported in R_ARM_CALL relocation. It should
also be useful when introducing support for the R_ARM_THM_CALL
relocation.
With R_ARM_CALL, if target function is to be entered in Thumb mode, the
relocation is supposed to transform bl in blx. This is not the case
actually so this commit is there to fix it.
Add support for relocations R_ARM_MOVW_ABS_NC and R_ARM_MOVT_ABS as well
as their Thumb2 counterpart R_ARM_THM_MOVW_ABS_NC and
R_ARM_THM_MOVT_ABS. These are encountered with gcc when compiling for
armv7-a and a data is loaded in a register, either in arm or Thumb2
mode. The first half of the data is loaded with movw ; the second half
is loaded with movt.
Modify tcc to accept convert full 64bits of specified text section
when converting on Win64. Write high bytes to the elf section address
as well. This allows creation of elf binaries located in offsets using
full 64 bit addresses.
Signed-off-by: Andrew Mulbrook <andrew262@gmail.com>
This changeset attempts to fix a few problems when giving using
the high 32bits of a 64bit section offset. There are likely more
issues (or perhaps regressions) lurking in the muck here. In general,
this moves a few data type declarations to use uplong. Also, add
support for 64bit mingw32 building under cygwin. Because native
types are used for 64 bit offsets, this won't fix challenges with
cross compiling from 32bit -> 64bit.
Tested under cygwin, against binary compiled with
-Wl,-Ttext=0xffffff8000000000
Signed-off-by: Andrew Mulbrook <andrew262@gmail.com>
Remove the previous logic to link a named file with a loader script by
using tcc_add_dll instead. Hence, all files can be linked, not only
files ending in .so/.def.
TinyCC fails to link correctly to libraries when both R_ARM_PLT32 and
R_ARM_GOT32 relocation to a same symbol exist (see
http://lists.nongnu.org/archive/html/tinycc-devel/2010-05/msg00032.html
for more details).
The patch marks all undefined weak symbols found in external libraries
as strong. The value of all remaining weak symbols is set to zero just
before the section is output.
Note by Thomas Preud'homme: it's been 2 months in Debian without any new
bug report, hence commiting.
- use {B} to substitute tcc_lih_path (instead of \b)
- expand CONFIG_TCC_CRTPREFIX in CONFIG_TCC_LIBPATHS
which fixes duplicate CONFIG_SYSROOT.
- put default CONFIG_SYSROOT ("") into tcc.h
- remove hack from commit db6fcce78f
because $(tccdir)/include is already in sysincludes
- configure: error out for unrecognized options.
- win32/build-tcc.bat: put libtcc into base dir where it will
find lib/include automatically, and build libtcc_test example.
--sysincludepaths=.. specify system include paths, colon separated"
Sets CONFIG_TCC_SYSINCLUDEPATHS
--libpaths=... specify system library paths, colon separated"
Sets CONFIG_TCC_LIBPATHS
--crtprefix=... specify location of crt?.o"
Sets CONFIG_TCC_CRTPREFIX
--elfinterp=... specify elf interpreter"
Sets CONFIG_TCC_ELFINTERP
Also the CONFIG_TCC_XXX were renamed to make them look
more consistent.
Also move the elf_interp definitions to tcc.h.
Add a --multiarch-triplet switch to configure. The switch will allow
files to be search for each default path in path/<triplet> and then
path.
Default paths handled that way:
- CONFIG_TCC_SYSINCLUDE_PATHS
- CONFIG_TCC_LIBPATH
- path to crt*.o
- path to libgcc_s.so.1
Path missing: elf interpreter path (will be handled in another commit)
This allows passing colon separated paths to
tcc_add_library_path
tcc_add_sysinclude_path
tcc_add_include_path
Also there are new configure variables
CONFIG_TCC_LIBPATH
CONFIG_TCC_SYSINCLUDE_PATHS
which define the lib/sysinclude paths all in one and can
be overridden from configure/make
For TCC_TARGET_PE semicolons (;) are used as separators
Also, \b in the path string is replaced by s->tcc_lib_path
(CONFIG_TCCDIR rsp. -B option)
- r_addend should be applied for PLT entries as well
- R_X86_64_PLT32 should be handled just like R_X86_64_PC32
- spec says GLOB_DAT and JUMP_SLOT don't need r_addend (not tested)
http://www.x86-64.org/documentation/abi.pdf
Now we can -run ELF objects generated by GCC.
ARM architecture doesn't have any libtcc1 implementation but tcc load
libtcc1.a in all case. This patch add a conditional preprocessor
instruction to load libtcc1.a only when there is an implementation for
the target architecture.
Make sure alias symbols resolve to the same address in program .bss or .data
section. This ensure for example that if a program reference environ (via an
extern char **environ declaration) and the libc change its value via the
__environ alias after the R_ARCH_COPY relocation have been performed, then
the program will see the new value.
* Replace the save/load_buffer_state by a dynarray approach:
- Filename and libname are added to a dynarray when first encountered
- Load repeatedly the files in the dynarray until no new undefined
symbol are encountered
* Replace snprintf by sprintf in libname_to_filename
* Use tcc_fileextension in filename_to_libname
* Introduce a tcc_strcpy_part fonction to copy only a subset of a
string
* Move new_undef_syms declaration from tcc.h to tccelf.c
* search file from INPUT and GROUP commands in the library path in
addition to the current directory
* handle libraries specified by -lfoo options
* Search lib in GROUP command repeatedly
