sqlite/test/multiplex.test
shaneh e5a6ad6d63 Additional error checking and tests.
FossilOrigin-Name: 1ab9a59237bed6d03b55153a67588486f9adc67b
2010-11-05 03:58:58 +00:00

371 lines
9.8 KiB
Plaintext

# 2010 October 29
#
# The author disclaims copyright to this source code. In place of
# a legal notice, here is a blessing:
#
# May you do good and not evil.
# May you find forgiveness for yourself and forgive others.
# May you share freely, never taking more than you give.
#
#***********************************************************************
#
set testdir [file dirname $argv0]
source $testdir/tester.tcl
source $testdir/malloc_common.tcl
proc multiplex_delete {name} {
file delete -force $name
file delete -force $name-journal
file delete -force $name-wal
for {set i 1} {$i<=15} {incr i} {
file delete -force $name-000$i
file delete -force $name-00$i
}
}
db close
#-------------------------------------------------------------------------
# multiplex-1.1.*: Test initialize and shutdown.
do_test multiplex-1.1 { sqlite3_multiplex_initialize nosuchvfs 1 } {SQLITE_ERROR}
do_test multiplex-1.2 { sqlite3_multiplex_initialize "" 1 } {SQLITE_OK}
do_test multiplex-1.3 { sqlite3_multiplex_initialize "" 1 } {SQLITE_MISUSE}
do_test multiplex-1.4 { sqlite3_multiplex_shutdown } {SQLITE_OK}
do_test multiplex-1.5 { sqlite3_multiplex_initialize "" 0 } {SQLITE_OK}
do_test multiplex-1.6 { sqlite3_multiplex_shutdown } {SQLITE_OK}
do_test multiplex-1.7 { sqlite3_multiplex_initialize "" 1 } {SQLITE_OK}
do_test multiplex-1.8 { sqlite3_multiplex_shutdown } {SQLITE_OK}
do_test multiplex-1.9 { sqlite3_multiplex_initialize "" 1 } {SQLITE_OK}
do_test multiplex-1.10.1 { sqlite3_multiplex_set 0x8000 16 } {SQLITE_OK}
do_test multiplex-1.10.2 { sqlite3_multiplex_set 0x8000 -1 } {SQLITE_MISUSE}
do_test multiplex-1.10.3 { sqlite3_multiplex_set -1 16 } {SQLITE_MISUSE}
do_test multiplex-1.10.4 { sqlite3_multiplex_set 31 16 } {SQLITE_MISUSE}
do_test multiplex-1.10.5 { sqlite3_multiplex_set 0x8000 33 } {SQLITE_MISUSE}
do_test multiplex-1.11 { sqlite3_multiplex_shutdown } {SQLITE_OK}
#-------------------------------------------------------------------------
# Some simple warm-body tests with a single database file in rollback
# mode:
#
# multiplex-2.1.*: Test simple writing to a multiplex file.
#
# multiplex-2.2.*: More writing.
#
# multiplex-2.3.*: Open and close a second db.
#
# multiplex-2.4.*: Try to shutdown the multiplex system before closing the db
# file. Check that this fails and the multiplex system still works
# afterwards. Then close the database and successfully shut
# down the multiplex system.
#
# multiplex-2.5.*: More reading/writing with small chunk size.
sqlite3_multiplex_initialize "" 1
sqlite3_multiplex_set 0x8000 16
do_test multiplex-2.1.2 {
sqlite3 db test.db
execsql {
PRAGMA page_size=1024;
PRAGMA auto_vacuum=OFF;
PRAGMA journal_mode=DELETE;
}
execsql {
CREATE TABLE t1(a, b);
INSERT INTO t1 VALUES(1, randomblob(1100));
INSERT INTO t1 VALUES(2, randomblob(1100));
}
} {}
do_test multiplex-2.1.3 { file size test.db } {4096}
do_test multiplex-2.1.4 {
execsql { INSERT INTO t1 VALUES(3, randomblob(1100)) }
} {}
do_test multiplex-2.2.1 {
execsql { INSERT INTO t1 VALUES(3, randomblob(1100)) }
} {}
do_test multiplex-2.2.3 { file size test.db } {6144}
do_test multiplex-2.3.1 {
sqlite3 db2 bak.db
db2 close
} {}
do_test multiplex-2.4.1 {
sqlite3_multiplex_shutdown
} {SQLITE_MISUSE}
do_test multiplex-2.4.2 {
execsql { INSERT INTO t1 VALUES(3, randomblob(1100)) }
} {}
do_test multiplex-2.4.4 { file size test.db } {7168}
do_test multiplex-2.4.99 {
db close
sqlite3_multiplex_shutdown
} {SQLITE_OK}
do_test multiplex-2.5.1 {
multiplex_delete test.db
sqlite3_multiplex_initialize "" 1
sqlite3_multiplex_set 0x1000 16
} {SQLITE_OK}
do_test multiplex-2.5.2 {
sqlite3 db test.db
execsql {
PRAGMA page_size = 1024;
PRAGMA journal_mode = delete;
PRAGMA auto_vacuum = off;
CREATE TABLE t1(a PRIMARY KEY, b);
}
} {delete}
do_test multiplex-2.5.3 {
execsql {
INSERT INTO t1 VALUES(1, 'one');
INSERT INTO t1 VALUES(2, randomblob(4000));
INSERT INTO t1 VALUES(3, 'three');
INSERT INTO t1 VALUES(4, randomblob(4000));
INSERT INTO t1 VALUES(5, 'five')
}
} {}
do_test multiplex-2.5.4 {
db eval {SELECT * FROM t1 WHERE a=1}
} {1 one}
do_test multiplex-2.5.5 {
db eval {SELECT * FROM t1 WHERE a=3}
} {3 three}
do_test multiplex-2.5.6 {
db eval {SELECT * FROM t1 WHERE a=5}
} {5 five}
do_test multiplex-2.5.7 {
db eval {SELECT a,length(b) FROM t1 WHERE a=2}
} {2 4000}
do_test multiplex-2.5.8 {
db eval {SELECT a,length(b) FROM t1 WHERE a=4}
} {4 4000}
do_test multiplex-2.5.99 {
db close
sqlite3_multiplex_shutdown
} {SQLITE_OK}
#-------------------------------------------------------------------------
# Try some tests with more than one connection to a database file. Still
# in rollback mode.
#
# multiplex-3.1.*: Two connections to a single database file.
#
# multiplex-3.2.*: Two connections to each of several database files (that
# are in the same multiplex group).
#
do_test multiplex-3.1.1 {
multiplex_delete test.db
sqlite3_multiplex_initialize "" 1
sqlite3_multiplex_set 0x8000 16
} {SQLITE_OK}
do_test multiplex-3.1.2 {
sqlite3 db test.db
execsql {
PRAGMA page_size = 1024;
PRAGMA journal_mode = delete;
PRAGMA auto_vacuum = off;
CREATE TABLE t1(a PRIMARY KEY, b);
INSERT INTO t1 VALUES(1, 'one');
}
file size test.db
} {3072}
do_test multiplex-3.1.3 {
sqlite3 db2 test.db
execsql { CREATE TABLE t2(a, b) } db2
} {}
do_test multiplex-3.1.4 {
execsql { CREATE TABLE t3(a, b) }
} {}
do_test multiplex-3.1.5 {
catchsql { CREATE TABLE t3(a, b) }
} {1 {table t3 already exists}}
do_test multiplex-3.1.6 {
db close
db2 close
} {}
do_test multiplex-3.2.1a {
multiplex_delete test.db
multiplex_delete test2.db
sqlite3 db1a test.db
sqlite3 db2a test2.db
foreach db {db1a db2a} {
execsql {
PRAGMA page_size = 1024;
PRAGMA journal_mode = delete;
PRAGMA auto_vacuum = off;
CREATE TABLE t1(a, b);
} $db
}
list [file size test.db] [file size test2.db]
} {2048 2048}
do_test multiplex-3.2.1b {
sqlite3 db1b test.db
sqlite3 db2b test2.db
} {}
do_test multiplex-3.2.2 { execsql { INSERT INTO t1 VALUES('x', 'y') } db1a } {}
do_test multiplex-3.2.3 { execsql { INSERT INTO t1 VALUES('v', 'w') } db1b } {}
do_test multiplex-3.2.4 { execsql { INSERT INTO t1 VALUES('t', 'u') } db2a } {}
do_test multiplex-3.2.5 { execsql { INSERT INTO t1 VALUES('r', 's') } db2b } {}
do_test multiplex-3.2.6 {
execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db1a
} {}
do_test multiplex-3.2.7 {
execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db1b
} {}
do_test multiplex-3.2.8 {
execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db2a
} {}
do_test multiplex-3.2.9 {
execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db2b
} {}
do_test multiplex-3.3.1 {
execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db1a
execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db1b
execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db2a
execsql { INSERT INTO t1 VALUES(randomblob(500), randomblob(500)) } db2b
} {}
do_test multiplex-3.2.X {
foreach db {db1a db2a db2b db1b} { catch { $db close } }
} {}
#-------------------------------------------------------------------------
#
sqlite3_multiplex_initialize "" 1
sqlite3_multiplex_set 0x8000 16
# Return a list of all currently defined multiplexs.
proc multiplex_list {} {
set allq {}
foreach q [sqlite3_multiplex_dump] {
lappend allq [lindex $q 0]
}
return [lsort $allq]
}
do_test multiplex-4.1.6 {
multiplex_delete test2.db
sqlite3 db test2.db
db eval {CREATE TABLE t2(x); INSERT INTO t2 VALUES('tab-t2');}
set res [multiplex_list]
list [regexp {test2.db} $res]
} {1}
do_test multiplex-4.1.6a {
sqlite3 db2 test2.db
db2 eval {SELECT * FROM t2}
} {tab-t2}
do_test multiplex-4.1.7 {
execsql {INSERT INTO t2 VALUES(zeroblob(200000))}
} {}
do_test multiplex-4.1.8 {
sqlite3 db2 test2.db
db2 eval {SELECT count(*) FROM t2}
} {2}
do_test multiplex-4.1.8a {
db2 eval { DELETE FROM t2 WHERE x = 'tab-t2' }
} {}
do_test multiplex-4.1.8b {
sqlite3 db2 test2.db
db2 eval {SELECT count(*) FROM t2}
} {1}
do_test multiplex-4.1.9 {
execsql {INSERT INTO t2 VALUES(zeroblob(200000))}
} {}
do_test multiplex-4.1.10 {
set res [multiplex_list]
list [regexp {test2.db} $res]
} {1}
do_test multiplex-4.1.11 {
db2 close
set res [multiplex_list]
list [regexp {test2.db} $res]
} {1}
do_test multiplex-4.1.12 {
db close
multiplex_list
} {}
#-------------------------------------------------------------------------
# The following tests test that the multiplex VFS handles malloc and IO
# errors.
#
sqlite3_multiplex_initialize "" 1
sqlite3_multiplex_set 0x8000 16
do_faultsim_test multiplex-5.1 -prep {
catch {db close}
} -body {
sqlite3 db test2.db
}
do_faultsim_test multiplex-5.2 -prep {
catch {db close}
} -body {
sqlite3 db test.db
}
catch { db close }
multiplex_delete test.db
do_test multiplex-5.3.prep {
sqlite3 db test.db
execsql {
PRAGMA auto_vacuum = 1;
PRAGMA page_size = 1024;
CREATE TABLE t1(a, b);
INSERT INTO t1 VALUES(10, zeroblob(1200));
}
faultsim_save_and_close
} {}
do_faultsim_test multiplex-5.3 -prep {
faultsim_restore_and_reopen
} -body {
execsql { DELETE FROM t1 }
}
do_test multiplex-5.4.1 {
catch { db close }
multiplex_delete test.db
file mkdir test.db
list [catch { sqlite3 db test.db } msg] $msg
} {1 {unable to open database file}}
do_faultsim_test multiplex-5.5 -prep {
catch { sqlite3_multiplex_shutdown }
} -body {
sqlite3_multiplex_initialize "" 1
sqlite3_multiplex_set 0x8000 16
}
catch { sqlite3_multiplex_shutdown }
finish_test