sqlite

History

drh a9106ca83d Merge recent trunk enhancements into the ota-update branch. FossilOrigin-Name: 5489cb68921f62f10d832adbc4d19ea8c6c5da50		2015-03-09 13:24:46 +00:00
..
8_3_names.test
aggerror.test
aggnested.test	Do not flatten aggregate subqueries that contain min() or max() functions	2014-09-15 14:46:02 +00:00
alias.test
all.test
alter2.test
alter3.test
alter4.test	Allow CAST expressions and unary "+" operators to be used in the DEFAULT	2014-08-25 20:11:52 +00:00
alter.test
altermalloc.test
amatch1.test
analyze3.test	Test cases added. Comments fixed. Proposed solution for	2015-03-06 20:49:52 +00:00
analyze4.test
analyze5.test
analyze6.test	Expire prepared statements after running ANALYZE.	2014-07-22 14:42:16 +00:00
analyze7.test
analyze8.test	Change the query planner to do a better job of estimating the number rows	2014-11-05 19:26:12 +00:00
analyze9.test	In cases where stat4 data is available but cannot be used because the rhs of a range constraint is too complex a expression, fall back to using the default estimates for number of rows scanned.	2014-08-25 18:29:38 +00:00
analyze.test
analyzeA.test	Test cases added for using unary "+" and CAST operators on the RHS of range	2014-08-25 20:21:07 +00:00
analyzeB.test
analyzeC.test	Enhance the sqlite_stat1.stat parsing to allow additional text parameters	2014-07-22 14:58:12 +00:00
analyzeD.test	Add a test to show that the change on this branch is effective.	2014-10-04 10:22:01 +00:00
analyzeE.test	Fix the STAT4 range scan estimates for DESC indexes.	2014-10-08 02:53:25 +00:00
async2.test
async3.test
async4.test
async5.test
async.test
atof1.test
attach2.test
attach3.test
attach4.test
attach.test
attachmalloc.test
auth2.test	Add support for the extra parameter on the sqlite3_set_authorizer() callback	2014-09-11 13:44:52 +00:00
auth3.test	Add support for the extra parameter on the sqlite3_set_authorizer() callback	2014-09-11 13:44:52 +00:00
auth.test	Add support for the extra parameter on the sqlite3_set_authorizer() callback	2014-09-11 13:44:52 +00:00
autoinc.test
autoindex1.test	New requirements marks and a few new test cases to go with them. No changes	2015-02-27 20:28:08 +00:00
autoindex2.test	Remove a redundant test case (probably a copy/paste error). Add an assert()	2014-11-22 12:22:13 +00:00
autoindex3.test	Consider using an automatic-index for a scan even if there exists a possible skip-scan that uses one or more "=" operators.	2014-11-14 19:34:20 +00:00
autoindex4.test	This additional fix prevents a partial index from being qualified for use	2015-02-24 16:48:59 +00:00
autovacuum_ioerr2.test
autovacuum.test
avtrans.test
backcompat.test	Add extra test to backcompat.test to ensure that old and new versions of FTS may work together on the same incremental merge operation.	2014-05-16 15:48:17 +00:00
backup2.test
backup4.test
backup5.test	Have calls to sqlite3_backup_init() fail if there is already a read or read-write transaction open on the destination database.	2014-11-13 14:18:25 +00:00
backup_ioerr.test
backup_malloc.test
backup.test	Have calls to sqlite3_backup_init() fail if there is already a read or read-write transaction open on the destination database.	2014-11-13 14:18:25 +00:00
badutf2.test
badutf.test
bc_common.tcl
between.test
bigfile2.test
bigfile.test
bigrow.test
bigsort.test	Disable the bigsort.test module on machine with less than 8GB of available	2014-12-31 19:58:32 +00:00
bind.test
bindxfer.test
bitvec.test
blob.test
boundary1.tcl
boundary1.test
boundary2.tcl
boundary2.test
boundary3.tcl
boundary3.test
boundary4.tcl
boundary4.test
btree01.test	More test cases for the balancer.	2014-11-27 04:23:19 +00:00
btreefault.test
busy.test
cache.test
capi2.test
capi3.test	Add a couple of requirements marks.	2015-02-27 00:33:15 +00:00
capi3b.test
capi3c.test	This is a cherry-pick of version [b5df5ac052].	2014-11-11 22:55:26 +00:00
capi3d.test	Remove some calls to the 'breakpoint' test command.	2014-11-11 19:07:56 +00:00
capi3e.test
cast.test
check.test
close.test
closure01.test
coalesce.test
collate1.test
collate2.test
collate3.test
collate4.test
collate5.test
collate6.test
collate7.test
collate8.test	Propagate the COLLATE operator upward through function calls.	2015-02-09 16:09:34 +00:00
collate9.test
collateA.test
colmeta.test	Fix the sqlite3_table_column_metadata() routine so that it gives the correct	2014-12-09 22:24:42 +00:00
colname.test
conflict2.test
conflict3.test
conflict.test
contrib01.test
corrupt2.test
corrupt3.test
corrupt4.test
corrupt5.test
corrupt6.test
corrupt7.test
corrupt8.test
corrupt9.test
corrupt.test
corruptA.test
corruptB.test
corruptC.test
corruptD.test
corruptE.test
corruptF.test
corruptG.test
corruptH.test	Remove some calls to the 'breakpoint' test command.	2014-11-11 19:07:56 +00:00
corruptI.test	Fix the corruptI.test script so that it works with	2014-10-07 20:09:27 +00:00
cost.test	Add a test to double-check that [1cbe7a0883] did not affect anything.	2014-06-03 11:32:38 +00:00
count.test
coveridxscan.test
crash2.test
crash3.test
crash4.test
crash5.test
crash6.test
crash7.test
crash8.test
crash.test
crashtest1.c
createtab.test
cse.test
ctime.test
date.test
dbstatus2.test
dbstatus.test
default.test	Do not allow parameters in a DEFAULT clause of a CREATE TABLE statement.	2014-09-24 13:20:22 +00:00
delete2.test
delete3.test
delete.test
descidx1.test
descidx2.test
descidx3.test
diskfull.test
distinct.test	Make sure that a DISTINCT query with an ORDER BY works correctly even if	2014-12-04 21:54:58 +00:00
distinctagg.test
e_blobbytes.test	Add tests for sqlite3_blob_bytes().	2014-11-11 16:11:04 +00:00
e_blobclose.test	Add new test file e_blobclose.test, containing tests for sqlite3_blob_close().	2014-11-11 12:20:35 +00:00
e_blobopen.test	Add new test file e_blobopen.test, containing tests for sqlite3_blob_open().	2014-11-07 14:41:11 +00:00
e_blobwrite.test	Add test file e_blobwrite.test, containing tests for the sqlite3_blob_write() interface.	2014-11-10 17:53:03 +00:00
e_changes.test	Modify the documentation for sqlite3_changes() to make it more testable. Add tests and minor fixes for the same.	2014-10-28 18:24:16 +00:00
e_createtable.test	Update to requirements marks related to changes in the memory allocation	2014-10-03 14:54:47 +00:00
e_delete.test
e_droptrigger.test
e_dropview.test
e_expr.test	Add a few more requirements tests.	2014-08-11 17:37:27 +00:00
e_fkey.test
e_fts3.test
e_insert.test	New requirements marks on INSERT and INDEXED BY and on some sqlite3_config()	2015-03-04 23:14:14 +00:00
e_reindex.test
e_resolve.test
e_select2.test
e_select.test
e_totalchanges.test	Add new test file e_totalchanges.test, containing tests of the sqlite3_total_changes() interface.	2014-10-28 20:49:59 +00:00
e_update.test
e_uri.test	Updates to documentation and requirements marks. No code changes.	2014-10-04 11:59:33 +00:00
e_vacuum.test
e_wal.test	Update a requirements mark to reflect a change of wording in the documentation.	2015-02-26 16:40:41 +00:00
e_walauto.test	Fix the e_walauto.test test module so that it works on both little-endian and	2015-01-13 01:12:43 +00:00
e_walckpt.test	Fix some recently added tests so that they work with SQLITE_DEFAULT_AUTOVACUUM=1.	2014-12-29 12:02:31 +00:00
e_walhook.test	Fix a typo causing a test error in e_walhook.test.	2014-12-10 20:57:20 +00:00
enc2.test
enc3.test
enc4.test
enc.test
eqp.test	Changes to the output of EXPLAIN QUERY PLAN to make it clearer when a query uses the PRIMARY KEY index of a WITHOUT ROWID table.	2014-05-23 17:17:06 +00:00
errmsg.test
eval.test	Ensure that the OP_Prev opcode verifies that content has not been deleted	2014-09-29 15:00:28 +00:00
exclusive2.test
exclusive.test
exec.test
exists.test
expr.test	Avoid a NULL pointer deference when processing the IS operator if the	2014-10-02 21:52:35 +00:00
extension01.test	Fix the extension01.test script so that it works on windows. Fix a	2014-06-16 12:51:56 +00:00
fallocate.test
filectrl.test
filefmt.test
fkey1.test
fkey2.test	Add support for the extra parameter on the sqlite3_set_authorizer() callback	2014-09-11 13:44:52 +00:00
fkey3.test
fkey4.test
fkey5.test	New requirements marks and a few new test cases to go with them. No changes	2015-02-27 20:28:08 +00:00
fkey6.test
fkey7.test	Add new test file e_blobopen.test, containing tests for sqlite3_blob_open().	2014-11-07 14:41:11 +00:00
fkey8.test	Fix some comments in fkey.c. Add tests to fkey8.test.	2014-12-17 14:38:45 +00:00
fkey_malloc.test
format4.test
fts1a.test
fts1b.test
fts1c.test
fts1d.test
fts1e.test
fts1f.test
fts1i.test
fts1j.test
fts1k.test
fts1l.test
fts1m.test
fts1n.test
fts1o.test
fts1porter.test
fts2.test
fts2a.test
fts2b.test
fts2c.test
fts2d.test
fts2e.test
fts2f.test
fts2g.test
fts2h.test
fts2i.test
fts2j.test
fts2k.test
fts2l.test
fts2m.test
fts2n.test
fts2o.test
fts2p.test
fts2q.test
fts2r.test
fts2token.test
fts3_common.tcl
fts3.test
fts3aa.test
fts3ab.test
fts3ac.test
fts3ad.test
fts3ae.test
fts3af.test
fts3ag.test
fts3ah.test
fts3ai.test
fts3aj.test
fts3ak.test
fts3al.test
fts3am.test
fts3an.test
fts3ao.test
fts3atoken.test
fts3auto.test
fts3aux1.test
fts3aux2.test
fts3b.test
fts3c.test
fts3comp1.test
fts3conf.test
fts3corrupt2.test
fts3corrupt.test
fts3cov.test
fts3d.test	Fix a problem preventing delete markers from ever being removed from the FTS index.	2014-05-13 20:11:37 +00:00
fts3defer2.test	Fix the way parenthesis in MATCH expressions are handled by FTS if the tokenizer considers them to be token characters.	2014-05-07 19:59:36 +00:00
fts3defer3.test
fts3defer.test
fts3drop.test
fts3e.test
fts3expr2.test
fts3expr3.test
fts3expr4.test	Allow FTS tokenizers to choose whether or not to consider the "" character part of tokens or not. This restores the pre-[e21bf7a2ad] behaviour. Also fix a problem causing FTS to interpret tokens beginning with "" characters as EOF.	2014-10-09 15:08:17 +00:00
fts3expr.test	Fix the way parenthesis in MATCH expressions are handled by FTS if the tokenizer considers them to be token characters.	2014-05-07 19:59:36 +00:00
fts3fault2.test
fts3fault.test
fts3first.test
fts3join.test
fts3malloc.test
fts3matchinfo.test	Add a test case for the memory leak fixed by the previous check-in.	2014-10-09 14:10:38 +00:00
fts3near.test
fts3prefix2.test
fts3prefix.test
fts3query.test	Optimize range constraints on the rowid column of fts3/4 tables even if there is no MATCH clause in the query.	2015-01-29 11:52:22 +00:00
fts3rnd.test
fts3shared.test
fts3snippet.test	Fix a bug in the fts3 snippet() function causing it to omit leading separator characters from snippets that begin with the first token in a column.	2015-01-27 19:01:26 +00:00
fts3sort.test
fts3tok1.test
fts3tok_err.test
fts3varint.test
fts4aa.test	Add support for the extra parameter on the sqlite3_set_authorizer() callback	2014-09-11 13:44:52 +00:00
fts4check.test	Fix a problem that was causing the FTS4 integrity-check command to fail if the table had one or more "notindexed" columns.	2014-06-05 11:15:56 +00:00
fts4content.test
fts4docid.test
fts4growth2.test	Fix a broken test case in fts4growth2.test.	2014-05-17 15:10:37 +00:00
fts4growth.test	Fix a bug causing an incorrect segment size value to be stored if both an old and new FTS version performed work on the same incremental merge operation.	2014-05-16 10:30:44 +00:00
fts4incr.test
fts4langid.test
fts4merge2.test
fts4merge3.test
fts4merge4.test	Fix a problem to do with loading the value of the FTS automerge setting from the database.	2014-05-14 18:45:27 +00:00
fts4merge.test
fts4noti.test	Add an extra test to verify that the FTS notindexed option is working.	2014-05-28 10:00:38 +00:00
fts4unicode.test
fts-9fd058691.test
full.test
func2.test
func3.test	Updates to evidence marks and requirements. No changes to code.	2014-08-11 15:54:11 +00:00
func4.test
func5.test
func.test	Make sure the group_concat() function returns an empty string, not a NULL,	2014-05-07 17:19:31 +00:00
fuzz2.test	Make sure errors in the FROM clause of a SELECT cause analysis to abort	2015-01-22 12:00:17 +00:00
fuzz3.test
fuzz_common.tcl
fuzz_malloc.test
fuzz-oss1.test
fuzz.test
fuzzer1.test
fuzzerfault.test
genesis.tcl
hexlit.test	Enhancements to the hex literal tests.	2014-07-23 19:04:25 +00:00
hook.test
icu.test
imposter1.test	Change SQLITE_TESTCTRL_INITMODE to SQLITE_TESTCTRL_IMPOSTER. Revise the order	2015-01-30 20:59:27 +00:00
in2.test
in3.test
in4.test	Enhancements to the code generator for the IN operator that result in much	2014-08-02 21:03:33 +00:00
in5.test	Do not automatically remove the DISTINCT keyword from "a IN (SELECT DISTINCT ...)" expressions. Fix for [db87229497].	2014-11-14 15:42:23 +00:00
in.test
incrblob2.test	Fix potential 32-bit integer overflow problems on the offset and length	2015-02-07 15:16:35 +00:00
incrblob3.test
incrblob4.test
incrblob_err.test	If SQLITE_TEST_REALLOC_STRESS is defined, extend the op-code array used by virtual-machine programs by one element at a time, instead of doubling its size with each realloc().	2014-08-12 13:38:52 +00:00
incrblob.test
incrblobfault.test
incrvacuum2.test	First small steps toward brining trunk and apple-osx closer together.	2015-02-19 00:29:11 +00:00
incrvacuum3.test
incrvacuum_ioerr.test
incrvacuum.test
index2.test
index3.test
index4.test
index5.test	Fix a failing test case in index5.test. Also tweak the way cache memory is divided between read-only and dirty pages when using SQLITE_CONFIG_PAGECACHE to reduce IO in some cases.	2014-10-10 19:10:59 +00:00
index6.test	Prevent partial indexes on the table on the left hand side of a LEFT JOIN from being incorrectly qualified by a constraint in the ON clause of the join. This relaxes the rule introduced by the previous commit (as the partial indexes on the table on the rhs of the LEFT JOIN may now be qualified by terms within the ON clause).	2015-02-24 20:10:49 +00:00
index7.test	New test cases and requirements marks for PRAGMA index_info, index_xinfo,	2015-03-05 15:34:15 +00:00
index.test
indexedby.test	New requirements marks on INSERT and INDEXED BY and on some sqlite3_config()	2015-03-04 23:14:14 +00:00
indexfault.test
init.test
insert2.test
insert3.test
insert4.test
insert5.test
insert.test	Make sure sufficient VDBE registers are allocated for an INSERT...SELECT	2014-05-23 11:48:57 +00:00
instr.test
intarray.test
interrupt.test
intpkey.test
io.test
ioerr2.test	Update a couple of test cases to account for the fact that ROLLBACK does not always abort all running SELECT statements.	2014-11-18 20:16:27 +00:00
ioerr3.test
ioerr4.test
ioerr5.test
ioerr6.test
ioerr.test
join2.test
join3.test
join4.test
join5.test	If a table is the right operand of a LEFT JOIN, then any column of that	2014-12-04 16:27:17 +00:00
join6.test
join.test	SQLite has long accepted some unadvertised and non-standard join syntax.	2014-07-18 17:39:48 +00:00
journal1.test
journal2.test
journal3.test
jrnlmode2.test
jrnlmode3.test
jrnlmode.test
keyword1.test
lastinsert.test
laststmtchanges.test
like2.test
like3.test	New test cases for LIKE and GLOB with BLOB left-hand side values.	2015-03-07 12:58:52 +00:00
like.test	Test cases added. Comments fixed. Proposed solution for	2015-03-06 20:49:52 +00:00
limit.test	New requirements marks on compound SELECT statements.	2015-03-05 01:29:51 +00:00
loadext2.test
loadext.test
lock2.test
lock3.test
lock4.test
lock5.test	Fix a problem causing lock5.test to fail in mmap-mode.	2014-10-15 14:45:34 +00:00
lock6.test
lock7.test
lock_common.tcl
lock.test	New requirements marks and a few new test cases to go with them. No changes	2015-02-27 20:28:08 +00:00
lookaside.test
main.test	In releasetest.tcl:	2015-01-08 02:15:11 +00:00
make-where7.tcl
malloc3.test
malloc4.test
malloc5.test
malloc6.test
malloc7.test
malloc8.test
malloc9.test
malloc_common.tcl	If SQLITE_TEST_REALLOC_STRESS is defined, extend the op-code array used by virtual-machine programs by one element at a time, instead of doubling its size with each realloc().	2014-08-12 13:38:52 +00:00
malloc.test	Merge the pre-3.8.6 changes into the threads branch.	2014-08-14 14:02:48 +00:00
mallocA.test	Remove some temporary code in mallocA.test that was accidentally checked in.	2014-10-08 11:11:24 +00:00
mallocAll.test
mallocB.test
mallocC.test
mallocD.test
mallocE.test
mallocF.test
mallocG.test
mallocH.test
mallocI.test
mallocJ.test
mallocK.test	Fix an assert() that may fail following an OOM error.	2015-01-21 17:00:57 +00:00
mallocL.test	Add a test to ensure that the problem fixed by [a179e41e40] does not recur.	2014-08-12 09:36:08 +00:00
manydb.test
mem5.test
memdb.test
memleak.test
memsubsys1.test	Fix two test cases in memsubsys1 so that they work with the mmap permutation.	2015-01-01 14:13:45 +00:00
memsubsys2.test
minmax2.test
minmax3.test
minmax4.test	Do not flatten aggregate subqueries that contain min() or max() functions	2014-09-15 14:46:02 +00:00
minmax.test
misc1.test	Fix a (almost always harmless) read past the end of a memory allocation	2015-01-27 13:17:05 +00:00
misc2.test
misc3.test
misc4.test
misc5.test
misc6.test
misc7.test
misc8.test	Avoid calling sqlite3BtreeKeysize() on a b-tree cursor in SKIPNEXT or SKIPPREV state.	2014-11-17 19:42:48 +00:00
misuse.test
mmap1.test	Skip tests that require WAL mode when it is not enabled.	2014-11-04 19:52:15 +00:00
mmap2.test
mmap3.test
mmapfault.test
multiplex2.test
multiplex3.test
multiplex4.test	Clearification of some documentation text. Added requirements marks.	2015-03-06 04:37:26 +00:00
multiplex.test	Add a missing call to "test_sqlite3_log" to multiplex.test.	2014-07-31 18:14:37 +00:00
mutex1.test
mutex2.test
nan.test
nolock.test	Fix nolock and immutable so that they work even if READONLY is requested.	2014-05-07 15:32:03 +00:00
notify1.test
notify2.test	Change notify2.test to check that sqlite3_blocking_step() uses CPU more efficiently than sqlite3_step(), not that it results in greater overall throughput for any specific number of threads.	2014-12-30 12:03:35 +00:00
notify3.test
notnull.test
null.test
numcast.test
openv2.test
orderby1.test	Make sure that the sorting-index pre-filter recognizes that a rowid reference	2014-09-19 02:01:37 +00:00
orderby2.test
orderby3.test
orderby4.test
orderby5.test
orderby6.test
orderby7.test
orderby8.test	There are asserts in place now that will prevent a recurrence of	2015-01-19 21:10:53 +00:00
oserror.test	Try to fix up the "valgrindtest" target in Makefile.in so that it avoids	2015-01-08 16:47:51 +00:00
ota.test	Add SQLITE_ENABLE_OTA pre-processor directives so that this branch may be compiled with or without OTA.	2014-11-22 09:09:50 +00:00
ovfl.test	Avoid ever writing before the start of an allocated buffer in the DIRECT_OVERFLOW_READ code. Fix for [e3a290961a6].	2014-10-01 12:01:10 +00:00
pager1.test
pager2.test
pager3.test
pager4.test
pagerfault2.test
pagerfault3.test
pagerfault.test
pageropt.test
pagesize.test
pcache2.test
pcache.test
percentile.test	Fix a floating-point round-off error problem in the percentile.test module.	2014-12-31 20:19:20 +00:00
permutations.test	Merge latest trunk changes with this branch.	2015-02-23 16:17:46 +00:00
pragma2.test	New requirements marks and a few new test cases to go with them. No changes	2015-02-27 20:28:08 +00:00
pragma3.test	Make sure PRAGMA data_version is updated even if the cache is empty when	2014-12-31 14:18:48 +00:00
pragma.test	New test cases and requirements marks for PRAGMA index_info, index_xinfo,	2015-03-05 15:34:15 +00:00
printf2.test	Fix the %c format character in sqlite3VXPrintf() so that it correctly handles precisions larger than 70.	2014-11-12 14:12:28 +00:00
printf.test
progress.test
ptrchng.test
queryonly.test
quick.test
quota2.test
quota-glob.test
quota.test
quote.test
randexpr1.tcl
randexpr1.test
rdonly.test	Clearification of some documentation text. Added requirements marks.	2015-03-06 04:37:26 +00:00
regexp1.test
reindex.test
releasetest.tcl	Merge in all changes from trunk.	2015-01-28 12:00:40 +00:00
resolver01.test
rollback2.test	When a transaction or savepoint rollback occurs, save the positions of all open read-cursors so that they can be restored following the rollback operation. Cherry-pick of check-in [dd03a2802f3f27]	2014-11-13 13:42:39 +00:00
rollback.test	This is a cherry-pick of version [b5df5ac052].	2014-11-11 22:55:26 +00:00
rollbackfault.test	Add further tests for rollback operations in the presence of ongoing selects.	2014-11-12 17:45:37 +00:00
rowhash.test
rowid.test	If an SQL function makes a recursive call to do an INSERT into the same	2014-09-26 01:10:02 +00:00
rtree.test
run-wordcount.sh
savepoint2.test
savepoint3.test
savepoint4.test
savepoint5.test
savepoint6.test
savepoint7.test	When a SELECT statement is terminated by a ROLLBACK TO operation, make the	2014-11-17 17:13:06 +00:00
savepoint.test	This is a cherry-pick of version [b5df5ac052].	2014-11-11 22:55:26 +00:00
scanstatus.test	Deploy heuristics (well-commented) to better estimate how much unindexed terms	2014-11-22 18:50:44 +00:00
schema2.test
schema3.test
schema4.test
schema5.test
schema.test
securedel2.test
securedel.test
select1.test
select2.test
select3.test
select4.test	New requirements marks on compound SELECT statements.	2015-03-05 01:29:51 +00:00
select5.test
select6.test	Add test cases for the query flattener fix for	2015-02-09 16:34:33 +00:00
select7.test
select8.test
select9.test
selectA.test
selectB.test
selectC.test
selectD.test
selectE.test
selectF.test
selectG.test	Improved and more rigorous test of large VALUES clauses.	2015-01-06 16:53:49 +00:00
server1.test
shared2.test
shared3.test
shared4.test
shared6.test
shared7.test
shared8.test
shared9.test
shared_err.test	Update a couple of test cases to account for the fact that ROLLBACK does not always abort all running SELECT statements.	2014-11-18 20:16:27 +00:00
shared.test
sharedA.test
sharedB.test	Improved comment on the sharedB.test test script.	2014-12-05 14:34:30 +00:00
sharedlock.test
shell1.test	Change the name of ".info" to ".dbinfo" and add an optional second argument	2015-02-06 14:51:13 +00:00
shell2.test	Remove the ill-designed "-end" option from the command-line shell. Instead,	2014-11-28 13:35:03 +00:00
shell3.test
shell4.test	Improvements to error messages for errors in the dot-commands of the	2014-05-29 12:36:14 +00:00
shell5.test	For the shell '.import' command, make sure the last column value present is considered before NULL filling any missing ones.	2015-02-12 22:45:25 +00:00
shortread1.test
show_speedtest1_rtree.tcl
shrink.test	Clearification of some documentation text. Added requirements marks.	2015-03-06 04:37:26 +00:00
sidedelete.test
skipscan1.test	Adding the "noskipscan" token to an sqlite_stat1.stat field prevents an	2014-11-15 19:08:13 +00:00
skipscan2.test	Changes to the output of EXPLAIN QUERY PLAN to make it clearer when a query uses the PRIMARY KEY index of a WITHOUT ROWID table.	2014-05-23 17:17:06 +00:00
skipscan3.test	Enhancements to skip-scan such that it is operable when a middle column of	2014-08-20 23:38:07 +00:00
skipscan5.test	Adjust skip-scan cost estimates slightly so that a full table scan is	2014-09-23 01:40:59 +00:00
skipscan6.test	Add a test case to check that the previous commit is effective.	2014-11-05 14:19:05 +00:00
soak.test
softheap1.test	More test cases and requirements marks for pragmas.	2015-02-28 01:04:27 +00:00
sort2.test	Add the SQLITE_CONFIG_PMASZ start-time option.	2015-01-02 15:55:29 +00:00
sort3.test	Fix a problem in the sorter causing it to return spurious SQLITE_NOMEM errors when configured to use memsys3 or memsys5.	2014-05-03 14:28:14 +00:00
sort4.test	Clearification of some documentation text. Added requirements marks.	2015-03-06 04:37:26 +00:00
sort5.test	Avoid attempting to call the xFetch() method of an sqlite3_io_methods object with a version number less than 3.	2014-09-15 16:50:34 +00:00
sort.test	Add the SQLITE_CONFIG_PMASZ start-time option.	2015-01-02 15:55:29 +00:00
sortfault.test	Add the SQLITE_CONFIG_PMASZ start-time option.	2015-01-02 15:55:29 +00:00
speed1.test
speed1p.explain
speed1p.test
speed2.test
speed3.test
speed4.test
speed4p.explain
speed4p.test
speedtest1.c	Fix some problems with OTA and empty target databases, or target databases with the wrong set of tables. Also add SQLITE_FCNTL_VFSNAME support to the OTA VFS.	2015-03-05 16:21:20 +00:00
spellfix.test	Enhance the spellfix extension with the ability to specify a rowid when	2014-08-22 11:11:30 +00:00
sqllimits1.test	Clearification of some documentation text. Added requirements marks.	2015-03-06 04:37:26 +00:00
stat.test
stmt.test
subquery2.test	Add test cases for ticket [89398880bcfff9].	2014-09-21 20:31:26 +00:00
subquery.test
subselect.test
substr.test
superlock.test
sync.test
syscall.test
sysfault.test
table.test	Make sure that NULL results from OP_Column are fully and completely NULL and do not have the MEM_Ephem bit set. Fix for ticket [094d39a4c95ee4].	2014-11-12 14:07:28 +00:00
tableapi.test
tableopts.test
tclsqlite.test
tempdb.test
temptable.test
temptrigger.test
tester.tcl	Merge all recent changes from trunk.	2014-08-06 02:03:35 +00:00
thread1.test
thread2.test
thread001.test
thread002.test
thread003.test
thread004.test
thread005.test
thread_common.tcl
threadtest1.c
threadtest2.c
threadtest3.c	Change threadtest3.c so that SQLITE_SCHEMA returns result in warnings	2014-12-31 18:55:09 +00:00
threadtest4.c	Add extra tests to threadtest4.c. Fix a benign data race accessing the	2014-12-12 23:17:54 +00:00
tkt35xx.test
tkt1435.test
tkt1443.test
tkt1444.test
tkt1449.test
tkt1473.test
tkt1501.test
tkt1512.test
tkt1514.test
tkt1536.test
tkt1537.test
tkt1567.test
tkt1644.test
tkt1667.test
tkt1873.test
tkt2141.test
tkt2192.test
tkt2213.test
tkt2251.test
tkt2285.test
tkt2332.test
tkt2339.test
tkt2391.test
tkt2409.test
tkt2450.test
tkt2565.test
tkt2640.test
tkt2643.test
tkt2686.test
tkt2767.test
tkt2817.test
tkt2820.test
tkt2822.test
tkt2832.test
tkt2854.test
tkt2920.test
tkt2927.test
tkt2942.test
tkt3080.test
tkt3093.test
tkt3121.test
tkt3201.test
tkt3292.test
tkt3298.test
tkt3334.test
tkt3346.test
tkt3357.test
tkt3419.test
tkt3424.test
tkt3442.test
tkt3457.test
tkt3461.test
tkt3493.test
tkt3508.test
tkt3522.test
tkt3527.test
tkt3541.test
tkt3554.test
tkt3581.test
tkt3630.test
tkt3718.test
tkt3731.test
tkt3757.test
tkt3761.test
tkt3762.test
tkt3773.test
tkt3791.test
tkt3793.test
tkt3810.test
tkt3824.test
tkt3832.test
tkt3838.test
tkt3841.test
tkt3871.test
tkt3879.test
tkt3911.test
tkt3918.test
tkt3922.test
tkt3929.test
tkt3935.test
tkt3992.test
tkt3997.test
tkt4018.test
tkt-2a5629202f.test
tkt-2d1a5c67d.test
tkt-2ea2425d34.test
tkt-3a77c9714e.test
tkt-3fe897352e.test
tkt-4a03edc4c8.test
tkt-4c86b126f2.test
tkt-4dd95f6943.test
tkt-4ef7e3cfca.test
tkt-5d863f876e.test
tkt-5e10420e8d.test
tkt-5ee23731f.test
tkt-6bfb98dfc0.test
tkt-7a31705a7e6.test
tkt-7bbfb7d442.test
tkt-8c63ff0ec.test
tkt-9a8b09f8e6.test	Add some more IN operator tests.	2014-06-26 22:17:21 +00:00
tkt-9d68c883.test
tkt-9f2eb3abac.test
tkt-02a8e81d44.test
tkt-26ff0c2d1e.test
tkt-38cb5df375.test
tkt-78e04e52ea.test
tkt-80ba201079.test
tkt-80e031a00f.test	Enhancements to the code generator for the IN operator that result in much	2014-08-02 21:03:33 +00:00
tkt-91e2e8ba6f.test
tkt-94c04eaadb.test
tkt-385a5b56b9.test
tkt-752e1646fc.test
tkt-8454a207b9.test
tkt-31338dca7e.test
tkt-54844eea3f.test
tkt-313723c356.test
tkt-868145d012.test
tkt-3998683a16.test
tkt-a7b7803e.test
tkt-a8a0d2996a.test
tkt-b1d3a2e531.test
tkt-b75a9ca6b0.test
tkt-b351d95f9.test
tkt-b72787b1.test
tkt-ba7cbfaedc.test	Account for the ASC/DESC properties of ORDER BY expressions when using the same index for GROUP BY and ORDER BY. Candidate fix for [ba7cbfaedc].	2014-10-10 20:52:53 +00:00
tkt-bd484a090c.test
tkt-bdc6bbbb38.test
tkt-c48d99d690.test
tkt-cbd054fa6b.test
tkt-d11f09d36e.test
tkt-d82e3f3721.test
tkt-d635236375.test
tkt-f3e5abed55.test
tkt-f7b4edec.test
tkt-f67b41381a.test
tkt-f973c7ac31.test
tkt-f777251dc7a.test	This is a cherry-pick of version [b5df5ac052].	2014-11-11 22:55:26 +00:00
tkt-fa7bf5ec.test
tkt-fc7bd6358f.test
tkt-fc62af4523.test
tokenize.test
tpch01.test	Allow an automatic index on a WHERE constraint where the RHS is does not	2014-06-17 09:00:54 +00:00
trace2.test	Do not search for promotable segments following an FTS 'optimize' operation or creation of a new segment on the oldest existing level.	2014-05-14 19:49:17 +00:00
trace.test	Make sure the sqlite3_trace() callback is invoked, even if the prepared	2014-08-19 20:27:40 +00:00
trans2.test
trans3.test	This is a cherry-pick of version [b5df5ac052].	2014-11-11 22:55:26 +00:00
trans.test
transitive1.test
trigger1.test
trigger2.test
trigger3.test
trigger4.test
trigger5.test
trigger6.test
trigger7.test
trigger8.test
trigger9.test	Fix problems with running UPDATE and DELETE against a VIEW and referencing	2014-10-29 01:26:25 +00:00
triggerA.test
triggerB.test
triggerC.test
triggerD.test
triggerE.test
tt3_checkpoint.c	Update the threadtest3 test program so that its output summary is	2014-12-30 19:26:07 +00:00
tt3_index.c	Further enhancements to threadtest3 stress tests.	2014-12-13 17:41:48 +00:00
tt3_lookaside1.c	Further enhancements to threadtest3 stress tests.	2014-12-13 17:41:48 +00:00
tt3_stress.c	Changes to threadtest3 so that "stress2" is more similar to the SDS stress test.	2014-12-15 20:49:26 +00:00
tt3_vacuum.c	Further enhancements to threadtest3 stress tests.	2014-12-13 17:41:48 +00:00
types2.test
types3.test
types.test
unique2.test	Ensure that the correct number of columns in a UNIQUE index are checked for	2014-07-30 13:56:48 +00:00
unique.test
unixexcl.test
unordered.test
update.test	In the OP_Column opcode, when extracting a field that is past the end of	2014-10-29 01:13:58 +00:00
uri.test
userauth01.test	Enhance the sqlite3_user_add() interface to initialize the user	2014-09-11 16:19:31 +00:00
utf16align.test
vacuum2.test
vacuum3.test
vacuum4.test
vacuum.test
varint.test
veryquick.test
view.test
vtab1.test	Fix a buffer overread during compilation of CREATE VIRTUAL TABLE statements that featured an explicit database name but no virtual table arguments. For example, "CREATE VIRTUAL TABLE main.ft USING fts4".	2014-11-27 11:36:36 +00:00
vtab2.test
vtab3.test	Add support for the extra parameter on the sqlite3_set_authorizer() callback	2014-09-11 13:44:52 +00:00
vtab4.test
vtab5.test
vtab6.test
vtab7.test
vtab8.test
vtab9.test
vtab_alter.test
vtab_err.test
vtab_shared.test
vtabA.test
vtabB.test
vtabC.test
vtabD.test
vtabE.test
vtabF.test
wal2.test
wal3.test
wal4.test
wal5.test	Fix some duplicated test names.	2015-01-29 19:27:31 +00:00
wal6.test
wal7.test
wal8.test
wal9.test
wal64k.test
wal_common.tcl
wal.test	Test that sqlite3ota_open() works with URI paths. Fix some other issues.	2014-10-21 19:35:03 +00:00
walbak.test
walbig.test
walcksum.test
walcrash2.test
walcrash3.test
walcrash.test
walfault.test
walhook.test
walmode.test
walnoshm.test
walpersist.test
walro.test
walshared.test
walslow.test
walthread.test
where2.test	The optimization of check-in [b67a6e33f2] does not work (it generates	2014-07-22 19:14:42 +00:00
where3.test
where4.test
where5.test
where6.test
where7.test
where8.test	Test cases added. Comments fixed. Proposed solution for	2015-03-06 20:49:52 +00:00
where8m.test
where9.test	Fix where9.test so that it works with the "no_optimization" permutation.	2014-08-12 20:13:22 +00:00
where.test
whereA.test
whereB.test
whereC.test
whereD.test
whereE.test
whereF.test
whereG.test	Add the likely() function for symmetry with unlikely(). The likely(X)	2014-06-17 16:11:28 +00:00
whereH.test
whereI.test	Add a test to whereI.test that uses a multi-column PK.	2014-05-27 11:42:23 +00:00
whereJ.test	Performance enhancement for single-table queries with many OR-connected	2014-12-04 20:24:50 +00:00
wherelimit.test
wild001.test
win32heap.test
win32lock.test	Add extra checking of the database extended error code.	2014-05-30 16:54:09 +00:00
win32longpath.test
with1.test
with2.test
withM.test
without_rowid1.test	Fix where.c so that the primary key values appended to every index entry on a WITHOUT ROWID table may be used when useful.	2014-06-30 15:23:57 +00:00
without_rowid2.test
without_rowid3.test	Add support for the extra parameter on the sqlite3_set_authorizer() callback	2014-09-11 13:44:52 +00:00
without_rowid4.test
without_rowid5.test	Add new test file e_blobopen.test, containing tests for sqlite3_blob_open().	2014-11-07 14:41:11 +00:00
without_rowid6.test	Fix WITHOUT ROWID tables so that they correctly deal with PRIMARY KEYs that	2014-12-28 22:10:51 +00:00
wordcount.c
zeroblob.test
zerodamage.test