mirrors/sqlite
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
957026ac78
sqlite/test/e_walckpt.test
dan 620315840c Fix some recently added tests so that they work with SQLITE_DEFAULT_AUTOVACUUM=1. 
FossilOrigin-Name: ef0626ab20f753f01090ca8e8a94e8b516eea55e
2014-12-29 12:02:31 +00:00

755 lines
23 KiB
Plaintext
Raw Blame History

# 2014 December 04
#
# The author disclaims copyright to this source code. In place of
# a legal notice, here is a blessing:
#
# May you do good and not evil.
# May you find forgiveness for yourself and forgive others.
# May you share freely, never taking more than you give.
#
#***********************************************************************
#
set testdir [file dirname $argv0]
source $testdir/tester.tcl
source $testdir/lock_common.tcl
source $testdir/wal_common.tcl
set testprefix e_walckpt
# The following two commands are used to determine if any of the files
# "test.db", "test.db2" and "test.db3" are modified by a test case.
#
# The [save_db_hashes] command saves a hash of the current contents of
# all three files in global variables. The [compare_db_hashes] compares
# the current contents with the saved hashes and returns a list of the
# files that have changed.
#
proc save_db_hashes {} {
global H
foreach f {test.db test.db2 test.db3} {
set H($f) 0
catch { set H($f) [md5file $f] }
}
}
proc compare_db_hashes {} {
global H
set ret [list]
foreach f {test.db test.db2 test.db3} {
set expect 0
catch { set expect [md5file $f] }
if {$H($f) != $expect} { lappend ret $f }
}
set ret
}
#-------------------------------------------------------------------------
# All calls to the [sqlite3_wal_checkpoint_v2] command made within this
# file use this wrapper. It's sole purpose is to throw an error if the
# following requirement is violated:
#
# EVIDENCE-OF: R-60567-47780 Unless it returns SQLITE_MISUSE, the
# sqlite3_wal_checkpoint_v2() interface sets the error information that
# is queried by sqlite3_errcode() and sqlite3_errmsg().
#
proc wal_checkpoint_v2 {db args} {
set rc [catch {
uplevel sqlite3_wal_checkpoint_v2 $db $args
} msg]
set errcode "SQLITE_OK"
if {$rc} {
set errcode [lindex [split $msg " "] 0]
} elseif { [lindex $msg 0] } {
set errcode "SQLITE_BUSY"
}
if {$errcode != "SQLITE_MISUSE" && [sqlite3_errcode $db] != $errcode} {
error "sqlite3_errcode mismatch! (1) $errcode!=[sqlite3_errcode $db]"
}
if {$rc==0} {
return $msg
} else {
error $msg
}
}
# The following tests are run 3 times, each using a different method of
# invoking a checkpoint:
#
# 1) Using sqlite3_wal_checkpoint_v2()
# 2) Using "PRAGMA wal_checkpoint"
# 3) Using sqlite3_wal_checkpoint() in place of checkpoint_v2(PASSIVE)
#
# Cases (2) and (3) are to show that the following statements are
# correct, respectively:
#
# EVIDENCE-OF: R-36706-10507 The PRAGMA wal_checkpoint command can be
# used to invoke this interface from SQL.
#
# EVIDENCE-OF: R-41613-20553 The sqlite3_wal_checkpoint(D,X) is
# equivalent to
# sqlite3_wal_checkpoint_v2(D,X,SQLITE_CHECKPOINT_PASSIVE,0,0).
#
foreach {tn script} {
1 {
proc checkpoint {db mode args} {
eval wal_checkpoint_v2 [list $db] [list $mode] $args
}
}
2 {
proc checkpoint {db mode args} {
set sql "PRAGMA wal_checkpoint = $mode"
if {[llength $args] && [lindex $args 0]!=""} {
set sql "PRAGMA [lindex $args 0].wal_checkpoint = $mode"
}
set rc [catch { $db eval $sql } msg]
if {$rc} {
regsub {database} $msg {database:} msg
error "[sqlite3_errcode $db] - $msg"
}
set msg
}
}
3 {
proc checkpoint {db mode args} {
if {$mode == "passive"} {
set rc [eval sqlite3_wal_checkpoint [list $db] $args]
if {$rc != "SQLITE_OK"} {
error "$rc - [sqlite3_errmsg $db]"
}
} else {
eval wal_checkpoint_v2 [list $db] [list $mode] $args
}
}
}
} {
eval $script
reset_db
forcedelete test.db2 test.db3 test.db4
execsql {
ATTACH 'test.db2' AS aux;
ATTACH 'test.db3' AS aux2;
ATTACH 'test.db4' AS aux3;
CREATE TABLE t1(x);
CREATE TABLE aux.t2(x);
CREATE TABLE aux2.t3(x);
CREATE TABLE aux3.t4(x);
PRAGMA main.journal_mode = WAL;
PRAGMA aux.journal_mode = WAL;
PRAGMA aux2.journal_mode = WAL;
/* Leave aux4 in rollback mode */
}
# EVIDENCE-OF: R-49787-09095 The sqlite3_wal_checkpoint_v2(D,X,M,L,C)
# interface runs a checkpoint operation on database X of database
# connection D in mode M. Status information is written back into
# integers pointed to by L and C.
#
# Tests 1, 2 and 3 below verify the "on database X" part of the
# above. Other parts of this requirement are tested below.
#
# EVIDENCE-OF: R-00653-06026 If parameter zDb is NULL or points to a
# zero length string, then the specified operation is attempted on all
# WAL databases attached to database connection db.
#
# Tests 4 and 5 below test this.
#
foreach {tn2 zDb dblist} {
1 main test.db
2 aux test.db2
3 aux2 test.db3
4 "" {test.db test.db2 test.db3}
5 - {test.db test.db2 test.db3}
6 temp {}
} {
do_test $tn.1.$tn2 {
execsql {
INSERT INTO t1 VALUES(1);
INSERT INTO t2 VALUES(2);
INSERT INTO t3 VALUES(3);
}
save_db_hashes
if {$zDb == "-"} {
checkpoint db passive
} else {
checkpoint db passive $zDb
}
compare_db_hashes
} $dblist
}
# EVIDENCE-OF: R-38207-48996 If zDb is not NULL (or a zero length
# string) and is not the name of any attached database, SQLITE_ERROR is
# returned to the caller.
do_test $tn.2.1 {
list [catch { checkpoint db passive notadb } msg] $msg
} {1 {SQLITE_ERROR - unknown database: notadb}}
# EVIDENCE-OF: R-14303-42483 If database zDb is the name of an attached
# database that is not in WAL mode, SQLITE_OK is returned and both
# *pnLog and *pnCkpt set to -1.
#
if {$tn==3} {
# With sqlite3_wal_checkpoint() the two output variables cannot be
# tested. So just test that no error is returned when attempting to
# checkpoint a db in rollback mode.
do_test $tn.2.2.a { checkpoint db passive aux3 } {}
} else {
do_test $tn.2.2.b { checkpoint db passive aux3 } {0 -1 -1}
}
# EVIDENCE-OF: R-62028-47212 All calls obtain an exclusive "checkpoint"
# lock on the database file.
db close
testvfs tvfs
tvfs filter xShmLock
tvfs script filelock
proc filelock {method file handle details} {
# Test for an exclusive checkpoint lock. A checkpoint lock locks a
# single byte starting at offset 1.
if {$details == "1 1 lock exclusive"} { set ::seen_checkpoint_lock 1 }
}
sqlite3 db test.db -vfs tvfs
do_test $tn.3.1 {
execsql { INSERT INTO t1 VALUES('xyz') }
unset -nocomplain ::seen_checkpoint_lock
checkpoint db passive
set ::seen_checkpoint_lock
} {1}
db close
tvfs delete
reset_db
#-----------------------------------------------------------------------
# EVIDENCE-OF: R-10421-19736 If any other process is running a
# checkpoint operation at the same time, the lock cannot be obtained and
# SQLITE_BUSY is returned.
#
# EVIDENCE-OF: R-53820-33897 Even if there is a busy-handler configured,
# it will not be invoked in this case.
#
testvfs tvfs
tvfs filter xWrite
sqlite3 db test.db -vfs tvfs
sqlite3 db2 test.db -vfs tvfs
do_test $tn.3.2.1 {
db2 eval {
PRAGMA auto_vacuum = 0;
PRAGMA journal_mode = WAL;
CREATE TABLE t1(x, y);
INSERT INTO t1 VALUES(1,2);
INSERT INTO t1 VALUES(3,4);
INSERT INTO t1 VALUES(5,6);
}
file size test.db-wal
} [wal_file_size 5 1024]
# Connection [db] runs a checkpoint. During this checkpoint, each
# time it calls xWrite() to write a page into the database file, we
# attempt to start a checkpoint using [db2]. According to the
# first requirement being tested, this should return SQLITE_BUSY. According
# to the second, the busy-handler belonging to [db2] should not be
# invoked.
#
set ::write_count 0
set ::write_errors [list]
proc busy_callback {args} {
lappend ::write_errors "busy handler called!"
}
proc write_callback {args} {
set rc [catch {checkpoint db2 passive} msg]
if {0==[regexp "database is locked" $msg] && $msg!="1 -1 -1"} {
lappend ::write_errors "$rc $msg"
}
incr ::write_count
}
db2 busy busy_callback
tvfs script write_callback
do_test $tn.3.2.2 {
db eval {SELECT * FROM sqlite_master}
checkpoint db full
set ::write_count
} {2}
do_test $tn.3.2.3 {
set ::write_errors
} {}
db close
db2 close
tvfs delete
proc busy_handler {mode busy_handler_mode n} {
incr ::busy_handler_counter
switch -- $busy_handler_mode {
1 {
# Do nothing. Do not block.
return 1
}
2 {
# Close first the reader, then later the writer. Give up before
# closing the [db6] reader.
if {$n==5} { catch {db2 eval commit} }
if {$n==10} { catch {db3 eval commit} }
if {$n==15} { return 1 }
return 0
}
3 {
# Close first the writer, then later the reader. And finally the
# [db6] reader.
if {$n==5} { catch {db2 eval commit} }
if {$n==10} { catch {db3 eval commit} }
if {$n==15} { catch {db6 eval commit} }
return 0
}
}
}
foreach {mode busy_handler_mode} {
passive 1
full 1 full 2 full 3
restart 1 restart 2 restart 3
truncate 1 truncate 2 truncate 3
} {
set tp "$tn.$mode.$busy_handler_mode"
set ::sync_counter 0
# Set up a callback function for xSync and xWrite calls made during
# the checkpoint.
#
set ::checkpoint_ongoing 0
proc tvfs_callback {method args} {
if {$::checkpoint_ongoing==0} return
set tail [file tail [lindex $args 0]]
if {$method == "xSync" && $tail == "test.db"} {
incr ::sync_counter
}
if {$method == "xWrite" && $tail=="test.db"} {
if {$::write_ok < 0} {
set ::write_ok [expr ![catch {db5 eval { BEGIN IMMEDIATE }}]]
catch { db5 eval ROLLBACK }
}
if {$::read_ok < 0} {
set ::read_ok [expr ![catch {db5 eval { SELECT * FROM t1 }}]]
}
# If one has not already been opened, open a read-transaction using
# connection [db6]
catch { db6 eval { BEGIN ; SELECT * FROM sqlite_master } } msg
}
if {$method == "xShmLock" } {
set details [lindex $args 2]
if {$details == "0 1 lock exclusive"} { set ::seen_writer_lock 1 }
}
}
catch { db close }
forcedelete test.db
testvfs tvfs
sqlite3 db test.db -vfs tvfs
#tvfs filter xSync
tvfs script tvfs_callback
do_execsql_test $tp.0 {
CREATE TABLE t1(a, b);
CREATE TABLE t2(a, b);
PRAGMA journal_mode = wal;
INSERT INTO t1 VALUES(1, 2);
INSERT INTO t1 VALUES(3, 4);
INSERT INTO t1 VALUES(5, 6);
} {wal}
# Open a reader on the current database snapshot.
do_test $tp.1 {
sqlite3 db2 test.db -vfs tvfs
execsql {
BEGIN;
SELECT * FROM t1 UNION ALL SELECT * FROM t2;
} db2
} {1 2 3 4 5 6}
# Open a writer. Write a transaction. Then begin, but do not commit,
# a second transaction.
do_test $tp.2 {
sqlite3 db3 test.db -vfs tvfs
execsql {
INSERT INTO t2 VALUES(7, 8);
BEGIN;
INSERT INTO t2 VALUES(9, 10);
SELECT * FROM t1 UNION ALL SELECT * FROM t2;
} db3
} {1 2 3 4 5 6 7 8 9 10}
sqlite3 db5 test.db -vfs tvfs
sqlite3 db6 test.db -vfs tvfs
# Register a busy-handler with connection [db].
#
db busy [list busy_handler $mode $busy_handler_mode]
set ::sync_counter 0
set ::busy_handler_counter 0
set ::read_ok -1
set ::write_ok -1
set ::seen_writer_lock 0
set ::checkpoint_ongoing 1
do_test $tp.3 {
checkpoint db $mode main
set {} {}
} {}
set ::checkpoint_ongoing 0
set ::did_restart_blocking [expr {[catch {db6 eval commit}]}]
if { $mode=="passive" } {
# EVIDENCE-OF: R-16333-64433 Checkpoint as many frames as possible
# without waiting for any database readers or writers to finish, then
# sync the database file if all frames in the log were checkpointed.
#
# "As many frames as possible" means all but the last two transactions
# (the two that write to table t2, of which the scond is unfinished).
# So copying the db file only we see the t1 change, but not the t2
# modifications.
#
# The busy handler is not invoked (see below) and the db reader and
# writer are still active - so the checkpointer did not wait for either
# readers or writers. As a result the checkpoint was not finished and
# so the db file is not synced.
#
# EVIDENCE-OF: R-62920-47450 The busy-handler callback is never invoked
# in the SQLITE_CHECKPOINT_PASSIVE mode.
#
# It's not. Test case "$tp.6".
#
do_test $tp.4 {
forcecopy test.db abc.db
sqlite3 db4 abc.db
db4 eval { SELECT * FROM t1 UNION ALL SELECT * FROM t2 }
} {1 2 3 4 5 6}
do_test $tp.5 { set ::sync_counter } 0
do_test $tp.6 { set ::busy_handler_counter } 0
db4 close
db2 eval COMMIT
db3 eval COMMIT
# EVIDENCE-OF: R-65499-53765 On the other hand, passive mode might leave
# the checkpoint unfinished if there are concurrent readers or writers.
#
# The reader and writer have now dropped their locks. And so a
# checkpoint now is able to checkpoint more frames. Showing that the
# attempt above was left "unfinished".
#
# Also, because the checkpoint finishes this time, the db is synced.
# Which is part of R-16333-64433 above.
#
set ::checkpoint_ongoing 1
do_test $tp.7 {
checkpoint db $mode main
forcecopy test.db abc.db
sqlite3 db4 abc.db
db4 eval { SELECT * FROM t1 UNION ALL SELECT * FROM t2 }
} {1 2 3 4 5 6 7 8 9 10}
set ::checkpoint_ongoing 0
do_test $tp.7 { set ::sync_counter } 1
do_test $tp.8 { set ::busy_handler_counter } 0
db4 close
}
if { $mode=="full" || $mode=="restart" || $mode=="truncate" } {
# EVIDENCE-OF: R-59782-36818 The SQLITE_CHECKPOINT_FULL, RESTART and
# TRUNCATE modes also obtain the exclusive "writer" lock on the
# database file.
#
# Or at least attempts to obtain.
#
do_test $tp.9 {
set ::seen_writer_lock
} {1}
if {$busy_handler_mode==2 || $busy_handler_mode==3} {
# EVIDENCE-OF: R-59171-47567 This mode blocks (it invokes the
# busy-handler callback) until there is no database writer and all
# readers are reading from the most recent database snapshot.
#
# The test below shows that both the reader and writer have
# finished:
#
# Also restated by the following two. That both busy_handler_mode
# values 2 and 3 work show that both of the following are true - as
# they release the reader and writer transactions in different
# orders.
#
# EVIDENCE-OF: R-60642-04082 If the writer lock cannot be obtained
# immediately, and a busy-handler is configured, it is invoked and the
# writer lock retried until either the busy-handler returns 0 or the
# lock is successfully obtained.
#
# EVIDENCE-OF: R-48107-00250 The busy-handler is also invoked while
# waiting for database readers as described above.
#
do_test $tp.7 {
list [catchsql COMMIT db2] [catchsql COMMIT db3]
} [list \
{1 {cannot commit - no transaction is active}} \
{1 {cannot commit - no transaction is active}} \
]
# EVIDENCE-OF: R-29177-48281 It then checkpoints all frames in the log
# file and syncs the database file.
#
do_test $tp.8 {
forcecopy test.db abc.db
sqlite3 db4 abc.db
db4 eval { SELECT * FROM t1 UNION ALL SELECT * FROM t2 }
} {1 2 3 4 5 6 7 8 9 10}
do_test $tp.9 { set ::sync_counter } 1
db4 close
# EVIDENCE-OF: R-51867-44713 This mode blocks new database writers
# while it is pending, but new database readers are allowed to continue
# unimpeded.
#
# EVIDENCE-OF: R-47276-58266 Like SQLITE_CHECKPOINT_FULL, this mode
# blocks new database writer attempts while it is pending, but does not
# impede readers.
#
# The first of the above two refers to "full" mode. The second
# to "restart".
#
do_test $tp.10.1 {
list $::write_ok $::read_ok
} {0 1}
# EVIDENCE-OF: R-12410-31217 This mode works the same way as
# SQLITE_CHECKPOINT_FULL with the addition that after checkpointing the
# log file it blocks (calls the busy-handler callback) until all
# readers are reading from the database file only.
#
# The stuff above passed, so the first part of this requirement
# is met. The second part is tested below. If the checkpoint mode
# was "restart" or "truncate", then the busy-handler will have
# been called to block on wal-file readers.
#
do_test $tp.11 {
set ::did_restart_blocking
} [expr {($mode=="restart"||$mode=="truncate")&&$busy_handler_mode==3}]
# EVIDENCE-OF: R-44699-57140 This mode works the same way as
# SQLITE_CHECKPOINT_RESTART with the addition that it also truncates
# the log file to zero bytes just prior to a successful return.
if {$mode=="truncate" && $busy_handler_mode==3} {
do_test $tp.12 {
file size test.db-wal
} 0
}
} elseif {$busy_handler_mode==1} {
# EVIDENCE-OF: R-34519-06271 SQLITE_BUSY is returned in this case.
if {$tn!=2} {
# ($tn==2) is the loop that uses "PRAGMA wal_checkpoint"
do_test $tp.13 { sqlite3_errcode db } {SQLITE_BUSY}
}
# EVIDENCE-OF: R-49155-63541 If the busy-handler returns 0 before the
# writer lock is obtained or while waiting for database readers, the
# checkpoint operation proceeds from that point in the same way as
# SQLITE_CHECKPOINT_PASSIVE - checkpointing as many frames as possible
# without blocking any further.
do_test $tp.14 {
forcecopy test.db abc.db
sqlite3 db4 abc.db
db4 eval { SELECT * FROM t1 UNION ALL SELECT * FROM t2 }
} {1 2 3 4 5 6}
do_test $tp.15 { set ::sync_counter } 0
do_test $tp.16 { set ::busy_handler_counter } 1
db4 close
}
}
db2 close
db3 close
db5 close
db6 close
}
db close
tvfs delete
}
#-----------------------------------------------------------------------
# EVIDENCE-OF: R-03996-12088 The M parameter must be a valid checkpoint
# mode:
#
# Valid checkpoint modes are 0, 1, 2 and 3.
#
sqlite3 db test.db
foreach {tn mode res} {
0 -1001 {1 {SQLITE_MISUSE - not an error}}
1 -1 {1 {SQLITE_MISUSE - not an error}}
2 0 {0 {0 -1 -1}}
3 1 {0 {0 -1 -1}}
4 2 {0 {0 -1 -1}}
5 3 {0 {0 -1 -1}}
6 4 {1 {SQLITE_MISUSE - not an error}}
7 114 {1 {SQLITE_MISUSE - not an error}}
8 1000000 {1 {SQLITE_MISUSE - not an error}}
} {
do_test 4.$tn {
list [catch "wal_checkpoint_v2 db $mode" msg] $msg
} $res
}
db close
foreach tn {1 2 3} {
forcedelete test.db test.db2 test.db3
testvfs tvfs
sqlite3 db test.db -vfs tvfs
execsql {
ATTACH 'test.db2' AS aux2;
ATTACH 'test.db3' AS aux3;
PRAGMA main.journal_mode = WAL;
PRAGMA aux2.journal_mode = WAL;
PRAGMA aux3.journal_mode = WAL;
CREATE TABLE main.t1(x,y);
CREATE TABLE aux2.t2(x,y);
CREATE TABLE aux3.t3(x,y);
INSERT INTO t1 VALUES('a', 'b');
INSERT INTO t2 VALUES('a', 'b');
INSERT INTO t3 VALUES('a', 'b');
}
sqlite3 db2 test.db2 -vfs tvfs
switch -- $tn {
1 {
# EVIDENCE-OF: R-41299-52117 If no error (SQLITE_BUSY or otherwise) is
# encountered while processing the attached databases, SQLITE_OK is
# returned.
do_test 5.$tn.1 {
lindex [wal_checkpoint_v2 db truncate] 0
} {0} ;# 0 -> SQLITE_OK
do_test 5.$tn.2 {
list [expr [file size test.db-wal]==0] \
[expr [file size test.db2-wal]==0] \
[expr [file size test.db3-wal]==0]
} {1 1 1}
}
2 {
# EVIDENCE-OF: R-38578-34175 If an SQLITE_BUSY error is encountered when
# processing one or more of the attached WAL databases, the operation is
# still attempted on any remaining attached databases and SQLITE_BUSY is
# returned at the end.
db2 eval { BEGIN; INSERT INTO t2 VALUES('d', 'e'); }
do_test 5.$tn.1 {
lindex [wal_checkpoint_v2 db truncate] 0
} {1} ;# 1 -> SQLITE_BUSY
do_test 5.$tn.2 {
list [expr [file size test.db-wal]==0] \
[expr [file size test.db2-wal]==0] \
[expr [file size test.db3-wal]==0]
} {1 0 1}
db2 eval ROLLBACK
}
3 {
# EVIDENCE-OF: R-38049-07913 If any other error occurs while processing
# an attached database, processing is abandoned and the error code is
# returned to the caller immediately.
tvfs filter xWrite
tvfs script inject_ioerr
proc inject_ioerr {method file args} {
if {[file tail $file]=="test.db2"} {
return "SQLITE_IOERR"
}
return 0
}
do_test 5.$tn.1 {
list [catch { wal_checkpoint_v2 db truncate } msg] $msg
} {1 {SQLITE_IOERR - disk I/O error}}
do_test 5.$tn.2 {
list [expr [file size test.db-wal]==0] \
[expr [file size test.db2-wal]==0] \
[expr [file size test.db3-wal]==0]
} {1 0 0}
tvfs script ""
}
}
db close
db2 close
}
reset_db
sqlite3 db2 test.db
do_test 6.1 {
execsql {
PRAGMA auto_vacuum = 0;
PRAGMA journal_mode = WAL;
CREATE TABLE t1(a, b);
INSERT INTO t1 VALUES(1, 2);
}
file size test.db-wal
} [wal_file_size 3 1024]
do_test 6.2 {
db2 eval { BEGIN; SELECT * FROM t1; }
db eval { INSERT INTO t1 VALUES(3, 4) }
file size test.db-wal
} [wal_file_size 4 1024]
# At this point the log file contains 4 frames. 3 of which it should
# be possible to checkpoint.
#
# EVIDENCE-OF: R-16642-42503 If pnLog is not NULL, then *pnLog is set to
# the total number of frames in the log file or to -1 if the checkpoint
# could not run because of an error or because the database is not in
# WAL mode.
#
# EVIDENCE-OF: R-10514-25250 If pnCkpt is not NULL,then *pnCkpt is set
# to the total number of checkpointed frames in the log file (including
# any that were already checkpointed before the function was called) or
# to -1 if the checkpoint could not run due to an error or because the
# database is not in WAL mode.
#
do_test 6.4 {
lrange [wal_checkpoint_v2 db passive] 1 2
} {4 3}
# EVIDENCE-OF: R-37257-17813 Note that upon successful completion of an
# SQLITE_CHECKPOINT_TRUNCATE, the log file will have been truncated to
# zero bytes and so both *pnLog and *pnCkpt will be set to zero.
#
do_test 6.5 {
db2 eval COMMIT
wal_checkpoint_v2 db truncate
} {0 0 0}
finish_test
Reference in New Issue View Git Blame Copy Permalink