fc97bb5ba3
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
594 lines
18 KiB
C
594 lines
18 KiB
C
/*
|
|
* Toshiba TC6393XB I/O Controller.
|
|
* Found in Sharp Zaurus SL-6000 (tosa) or some
|
|
* Toshiba e-Series PDAs.
|
|
*
|
|
* Most features are currently unsupported!!!
|
|
*
|
|
* This code is licensed under the GNU GPL v2.
|
|
*
|
|
* Contributions after 2012-01-13 are licensed under the terms of the
|
|
* GNU GPL, version 2 or (at your option) any later version.
|
|
*/
|
|
#include "hw/hw.h"
|
|
#include "hw/arm/devices.h"
|
|
#include "hw/block/flash.h"
|
|
#include "ui/console.h"
|
|
#include "ui/pixel_ops.h"
|
|
#include "sysemu/blockdev.h"
|
|
|
|
#define IRQ_TC6393_NAND 0
|
|
#define IRQ_TC6393_MMC 1
|
|
#define IRQ_TC6393_OHCI 2
|
|
#define IRQ_TC6393_SERIAL 3
|
|
#define IRQ_TC6393_FB 4
|
|
|
|
#define TC6393XB_NR_IRQS 8
|
|
|
|
#define TC6393XB_GPIOS 16
|
|
|
|
#define SCR_REVID 0x08 /* b Revision ID */
|
|
#define SCR_ISR 0x50 /* b Interrupt Status */
|
|
#define SCR_IMR 0x52 /* b Interrupt Mask */
|
|
#define SCR_IRR 0x54 /* b Interrupt Routing */
|
|
#define SCR_GPER 0x60 /* w GP Enable */
|
|
#define SCR_GPI_SR(i) (0x64 + (i)) /* b3 GPI Status */
|
|
#define SCR_GPI_IMR(i) (0x68 + (i)) /* b3 GPI INT Mask */
|
|
#define SCR_GPI_EDER(i) (0x6c + (i)) /* b3 GPI Edge Detect Enable */
|
|
#define SCR_GPI_LIR(i) (0x70 + (i)) /* b3 GPI Level Invert */
|
|
#define SCR_GPO_DSR(i) (0x78 + (i)) /* b3 GPO Data Set */
|
|
#define SCR_GPO_DOECR(i) (0x7c + (i)) /* b3 GPO Data OE Control */
|
|
#define SCR_GP_IARCR(i) (0x80 + (i)) /* b3 GP Internal Active Register Control */
|
|
#define SCR_GP_IARLCR(i) (0x84 + (i)) /* b3 GP INTERNAL Active Register Level Control */
|
|
#define SCR_GPI_BCR(i) (0x88 + (i)) /* b3 GPI Buffer Control */
|
|
#define SCR_GPA_IARCR 0x8c /* w GPa Internal Active Register Control */
|
|
#define SCR_GPA_IARLCR 0x90 /* w GPa Internal Active Register Level Control */
|
|
#define SCR_GPA_BCR 0x94 /* w GPa Buffer Control */
|
|
#define SCR_CCR 0x98 /* w Clock Control */
|
|
#define SCR_PLL2CR 0x9a /* w PLL2 Control */
|
|
#define SCR_PLL1CR 0x9c /* l PLL1 Control */
|
|
#define SCR_DIARCR 0xa0 /* b Device Internal Active Register Control */
|
|
#define SCR_DBOCR 0xa1 /* b Device Buffer Off Control */
|
|
#define SCR_FER 0xe0 /* b Function Enable */
|
|
#define SCR_MCR 0xe4 /* w Mode Control */
|
|
#define SCR_CONFIG 0xfc /* b Configuration Control */
|
|
#define SCR_DEBUG 0xff /* b Debug */
|
|
|
|
#define NAND_CFG_COMMAND 0x04 /* w Command */
|
|
#define NAND_CFG_BASE 0x10 /* l Control Base Address */
|
|
#define NAND_CFG_INTP 0x3d /* b Interrupt Pin */
|
|
#define NAND_CFG_INTE 0x48 /* b Int Enable */
|
|
#define NAND_CFG_EC 0x4a /* b Event Control */
|
|
#define NAND_CFG_ICC 0x4c /* b Internal Clock Control */
|
|
#define NAND_CFG_ECCC 0x5b /* b ECC Control */
|
|
#define NAND_CFG_NFTC 0x60 /* b NAND Flash Transaction Control */
|
|
#define NAND_CFG_NFM 0x61 /* b NAND Flash Monitor */
|
|
#define NAND_CFG_NFPSC 0x62 /* b NAND Flash Power Supply Control */
|
|
#define NAND_CFG_NFDC 0x63 /* b NAND Flash Detect Control */
|
|
|
|
#define NAND_DATA 0x00 /* l Data */
|
|
#define NAND_MODE 0x04 /* b Mode */
|
|
#define NAND_STATUS 0x05 /* b Status */
|
|
#define NAND_ISR 0x06 /* b Interrupt Status */
|
|
#define NAND_IMR 0x07 /* b Interrupt Mask */
|
|
|
|
#define NAND_MODE_WP 0x80
|
|
#define NAND_MODE_CE 0x10
|
|
#define NAND_MODE_ALE 0x02
|
|
#define NAND_MODE_CLE 0x01
|
|
#define NAND_MODE_ECC_MASK 0x60
|
|
#define NAND_MODE_ECC_EN 0x20
|
|
#define NAND_MODE_ECC_READ 0x40
|
|
#define NAND_MODE_ECC_RST 0x60
|
|
|
|
struct TC6393xbState {
|
|
MemoryRegion iomem;
|
|
qemu_irq irq;
|
|
qemu_irq *sub_irqs;
|
|
struct {
|
|
uint8_t ISR;
|
|
uint8_t IMR;
|
|
uint8_t IRR;
|
|
uint16_t GPER;
|
|
uint8_t GPI_SR[3];
|
|
uint8_t GPI_IMR[3];
|
|
uint8_t GPI_EDER[3];
|
|
uint8_t GPI_LIR[3];
|
|
uint8_t GP_IARCR[3];
|
|
uint8_t GP_IARLCR[3];
|
|
uint8_t GPI_BCR[3];
|
|
uint16_t GPA_IARCR;
|
|
uint16_t GPA_IARLCR;
|
|
uint16_t CCR;
|
|
uint16_t PLL2CR;
|
|
uint32_t PLL1CR;
|
|
uint8_t DIARCR;
|
|
uint8_t DBOCR;
|
|
uint8_t FER;
|
|
uint16_t MCR;
|
|
uint8_t CONFIG;
|
|
uint8_t DEBUG;
|
|
} scr;
|
|
uint32_t gpio_dir;
|
|
uint32_t gpio_level;
|
|
uint32_t prev_level;
|
|
qemu_irq handler[TC6393XB_GPIOS];
|
|
qemu_irq *gpio_in;
|
|
|
|
struct {
|
|
uint8_t mode;
|
|
uint8_t isr;
|
|
uint8_t imr;
|
|
} nand;
|
|
int nand_enable;
|
|
uint32_t nand_phys;
|
|
DeviceState *flash;
|
|
ECCState ecc;
|
|
|
|
QemuConsole *con;
|
|
MemoryRegion vram;
|
|
uint16_t *vram_ptr;
|
|
uint32_t scr_width, scr_height; /* in pixels */
|
|
qemu_irq l3v;
|
|
unsigned blank : 1,
|
|
blanked : 1;
|
|
};
|
|
|
|
qemu_irq *tc6393xb_gpio_in_get(TC6393xbState *s)
|
|
{
|
|
return s->gpio_in;
|
|
}
|
|
|
|
static void tc6393xb_gpio_set(void *opaque, int line, int level)
|
|
{
|
|
// TC6393xbState *s = opaque;
|
|
|
|
if (line > TC6393XB_GPIOS) {
|
|
printf("%s: No GPIO pin %i\n", __FUNCTION__, line);
|
|
return;
|
|
}
|
|
|
|
// FIXME: how does the chip reflect the GPIO input level change?
|
|
}
|
|
|
|
void tc6393xb_gpio_out_set(TC6393xbState *s, int line,
|
|
qemu_irq handler)
|
|
{
|
|
if (line >= TC6393XB_GPIOS) {
|
|
fprintf(stderr, "TC6393xb: no GPIO pin %d\n", line);
|
|
return;
|
|
}
|
|
|
|
s->handler[line] = handler;
|
|
}
|
|
|
|
static void tc6393xb_gpio_handler_update(TC6393xbState *s)
|
|
{
|
|
uint32_t level, diff;
|
|
int bit;
|
|
|
|
level = s->gpio_level & s->gpio_dir;
|
|
|
|
for (diff = s->prev_level ^ level; diff; diff ^= 1 << bit) {
|
|
bit = ffs(diff) - 1;
|
|
qemu_set_irq(s->handler[bit], (level >> bit) & 1);
|
|
}
|
|
|
|
s->prev_level = level;
|
|
}
|
|
|
|
qemu_irq tc6393xb_l3v_get(TC6393xbState *s)
|
|
{
|
|
return s->l3v;
|
|
}
|
|
|
|
static void tc6393xb_l3v(void *opaque, int line, int level)
|
|
{
|
|
TC6393xbState *s = opaque;
|
|
s->blank = !level;
|
|
fprintf(stderr, "L3V: %d\n", level);
|
|
}
|
|
|
|
static void tc6393xb_sub_irq(void *opaque, int line, int level) {
|
|
TC6393xbState *s = opaque;
|
|
uint8_t isr = s->scr.ISR;
|
|
if (level)
|
|
isr |= 1 << line;
|
|
else
|
|
isr &= ~(1 << line);
|
|
s->scr.ISR = isr;
|
|
qemu_set_irq(s->irq, isr & s->scr.IMR);
|
|
}
|
|
|
|
#define SCR_REG_B(N) \
|
|
case SCR_ ##N: return s->scr.N
|
|
#define SCR_REG_W(N) \
|
|
case SCR_ ##N: return s->scr.N; \
|
|
case SCR_ ##N + 1: return s->scr.N >> 8;
|
|
#define SCR_REG_L(N) \
|
|
case SCR_ ##N: return s->scr.N; \
|
|
case SCR_ ##N + 1: return s->scr.N >> 8; \
|
|
case SCR_ ##N + 2: return s->scr.N >> 16; \
|
|
case SCR_ ##N + 3: return s->scr.N >> 24;
|
|
#define SCR_REG_A(N) \
|
|
case SCR_ ##N(0): return s->scr.N[0]; \
|
|
case SCR_ ##N(1): return s->scr.N[1]; \
|
|
case SCR_ ##N(2): return s->scr.N[2]
|
|
|
|
static uint32_t tc6393xb_scr_readb(TC6393xbState *s, hwaddr addr)
|
|
{
|
|
switch (addr) {
|
|
case SCR_REVID:
|
|
return 3;
|
|
case SCR_REVID+1:
|
|
return 0;
|
|
SCR_REG_B(ISR);
|
|
SCR_REG_B(IMR);
|
|
SCR_REG_B(IRR);
|
|
SCR_REG_W(GPER);
|
|
SCR_REG_A(GPI_SR);
|
|
SCR_REG_A(GPI_IMR);
|
|
SCR_REG_A(GPI_EDER);
|
|
SCR_REG_A(GPI_LIR);
|
|
case SCR_GPO_DSR(0):
|
|
case SCR_GPO_DSR(1):
|
|
case SCR_GPO_DSR(2):
|
|
return (s->gpio_level >> ((addr - SCR_GPO_DSR(0)) * 8)) & 0xff;
|
|
case SCR_GPO_DOECR(0):
|
|
case SCR_GPO_DOECR(1):
|
|
case SCR_GPO_DOECR(2):
|
|
return (s->gpio_dir >> ((addr - SCR_GPO_DOECR(0)) * 8)) & 0xff;
|
|
SCR_REG_A(GP_IARCR);
|
|
SCR_REG_A(GP_IARLCR);
|
|
SCR_REG_A(GPI_BCR);
|
|
SCR_REG_W(GPA_IARCR);
|
|
SCR_REG_W(GPA_IARLCR);
|
|
SCR_REG_W(CCR);
|
|
SCR_REG_W(PLL2CR);
|
|
SCR_REG_L(PLL1CR);
|
|
SCR_REG_B(DIARCR);
|
|
SCR_REG_B(DBOCR);
|
|
SCR_REG_B(FER);
|
|
SCR_REG_W(MCR);
|
|
SCR_REG_B(CONFIG);
|
|
SCR_REG_B(DEBUG);
|
|
}
|
|
fprintf(stderr, "tc6393xb_scr: unhandled read at %08x\n", (uint32_t) addr);
|
|
return 0;
|
|
}
|
|
#undef SCR_REG_B
|
|
#undef SCR_REG_W
|
|
#undef SCR_REG_L
|
|
#undef SCR_REG_A
|
|
|
|
#define SCR_REG_B(N) \
|
|
case SCR_ ##N: s->scr.N = value; return;
|
|
#define SCR_REG_W(N) \
|
|
case SCR_ ##N: s->scr.N = (s->scr.N & ~0xff) | (value & 0xff); return; \
|
|
case SCR_ ##N + 1: s->scr.N = (s->scr.N & 0xff) | (value << 8); return
|
|
#define SCR_REG_L(N) \
|
|
case SCR_ ##N: s->scr.N = (s->scr.N & ~0xff) | (value & 0xff); return; \
|
|
case SCR_ ##N + 1: s->scr.N = (s->scr.N & ~(0xff << 8)) | (value & (0xff << 8)); return; \
|
|
case SCR_ ##N + 2: s->scr.N = (s->scr.N & ~(0xff << 16)) | (value & (0xff << 16)); return; \
|
|
case SCR_ ##N + 3: s->scr.N = (s->scr.N & ~(0xff << 24)) | (value & (0xff << 24)); return;
|
|
#define SCR_REG_A(N) \
|
|
case SCR_ ##N(0): s->scr.N[0] = value; return; \
|
|
case SCR_ ##N(1): s->scr.N[1] = value; return; \
|
|
case SCR_ ##N(2): s->scr.N[2] = value; return
|
|
|
|
static void tc6393xb_scr_writeb(TC6393xbState *s, hwaddr addr, uint32_t value)
|
|
{
|
|
switch (addr) {
|
|
SCR_REG_B(ISR);
|
|
SCR_REG_B(IMR);
|
|
SCR_REG_B(IRR);
|
|
SCR_REG_W(GPER);
|
|
SCR_REG_A(GPI_SR);
|
|
SCR_REG_A(GPI_IMR);
|
|
SCR_REG_A(GPI_EDER);
|
|
SCR_REG_A(GPI_LIR);
|
|
case SCR_GPO_DSR(0):
|
|
case SCR_GPO_DSR(1):
|
|
case SCR_GPO_DSR(2):
|
|
s->gpio_level = (s->gpio_level & ~(0xff << ((addr - SCR_GPO_DSR(0))*8))) | ((value & 0xff) << ((addr - SCR_GPO_DSR(0))*8));
|
|
tc6393xb_gpio_handler_update(s);
|
|
return;
|
|
case SCR_GPO_DOECR(0):
|
|
case SCR_GPO_DOECR(1):
|
|
case SCR_GPO_DOECR(2):
|
|
s->gpio_dir = (s->gpio_dir & ~(0xff << ((addr - SCR_GPO_DOECR(0))*8))) | ((value & 0xff) << ((addr - SCR_GPO_DOECR(0))*8));
|
|
tc6393xb_gpio_handler_update(s);
|
|
return;
|
|
SCR_REG_A(GP_IARCR);
|
|
SCR_REG_A(GP_IARLCR);
|
|
SCR_REG_A(GPI_BCR);
|
|
SCR_REG_W(GPA_IARCR);
|
|
SCR_REG_W(GPA_IARLCR);
|
|
SCR_REG_W(CCR);
|
|
SCR_REG_W(PLL2CR);
|
|
SCR_REG_L(PLL1CR);
|
|
SCR_REG_B(DIARCR);
|
|
SCR_REG_B(DBOCR);
|
|
SCR_REG_B(FER);
|
|
SCR_REG_W(MCR);
|
|
SCR_REG_B(CONFIG);
|
|
SCR_REG_B(DEBUG);
|
|
}
|
|
fprintf(stderr, "tc6393xb_scr: unhandled write at %08x: %02x\n",
|
|
(uint32_t) addr, value & 0xff);
|
|
}
|
|
#undef SCR_REG_B
|
|
#undef SCR_REG_W
|
|
#undef SCR_REG_L
|
|
#undef SCR_REG_A
|
|
|
|
static void tc6393xb_nand_irq(TC6393xbState *s) {
|
|
qemu_set_irq(s->sub_irqs[IRQ_TC6393_NAND],
|
|
(s->nand.imr & 0x80) && (s->nand.imr & s->nand.isr));
|
|
}
|
|
|
|
static uint32_t tc6393xb_nand_cfg_readb(TC6393xbState *s, hwaddr addr) {
|
|
switch (addr) {
|
|
case NAND_CFG_COMMAND:
|
|
return s->nand_enable ? 2 : 0;
|
|
case NAND_CFG_BASE:
|
|
case NAND_CFG_BASE + 1:
|
|
case NAND_CFG_BASE + 2:
|
|
case NAND_CFG_BASE + 3:
|
|
return s->nand_phys >> (addr - NAND_CFG_BASE);
|
|
}
|
|
fprintf(stderr, "tc6393xb_nand_cfg: unhandled read at %08x\n", (uint32_t) addr);
|
|
return 0;
|
|
}
|
|
static void tc6393xb_nand_cfg_writeb(TC6393xbState *s, hwaddr addr, uint32_t value) {
|
|
switch (addr) {
|
|
case NAND_CFG_COMMAND:
|
|
s->nand_enable = (value & 0x2);
|
|
return;
|
|
case NAND_CFG_BASE:
|
|
case NAND_CFG_BASE + 1:
|
|
case NAND_CFG_BASE + 2:
|
|
case NAND_CFG_BASE + 3:
|
|
s->nand_phys &= ~(0xff << ((addr - NAND_CFG_BASE) * 8));
|
|
s->nand_phys |= (value & 0xff) << ((addr - NAND_CFG_BASE) * 8);
|
|
return;
|
|
}
|
|
fprintf(stderr, "tc6393xb_nand_cfg: unhandled write at %08x: %02x\n",
|
|
(uint32_t) addr, value & 0xff);
|
|
}
|
|
|
|
static uint32_t tc6393xb_nand_readb(TC6393xbState *s, hwaddr addr) {
|
|
switch (addr) {
|
|
case NAND_DATA + 0:
|
|
case NAND_DATA + 1:
|
|
case NAND_DATA + 2:
|
|
case NAND_DATA + 3:
|
|
return nand_getio(s->flash);
|
|
case NAND_MODE:
|
|
return s->nand.mode;
|
|
case NAND_STATUS:
|
|
return 0x14;
|
|
case NAND_ISR:
|
|
return s->nand.isr;
|
|
case NAND_IMR:
|
|
return s->nand.imr;
|
|
}
|
|
fprintf(stderr, "tc6393xb_nand: unhandled read at %08x\n", (uint32_t) addr);
|
|
return 0;
|
|
}
|
|
static void tc6393xb_nand_writeb(TC6393xbState *s, hwaddr addr, uint32_t value) {
|
|
// fprintf(stderr, "tc6393xb_nand: write at %08x: %02x\n",
|
|
// (uint32_t) addr, value & 0xff);
|
|
switch (addr) {
|
|
case NAND_DATA + 0:
|
|
case NAND_DATA + 1:
|
|
case NAND_DATA + 2:
|
|
case NAND_DATA + 3:
|
|
nand_setio(s->flash, value);
|
|
s->nand.isr |= 1;
|
|
tc6393xb_nand_irq(s);
|
|
return;
|
|
case NAND_MODE:
|
|
s->nand.mode = value;
|
|
nand_setpins(s->flash,
|
|
value & NAND_MODE_CLE,
|
|
value & NAND_MODE_ALE,
|
|
!(value & NAND_MODE_CE),
|
|
value & NAND_MODE_WP,
|
|
0); // FIXME: gnd
|
|
switch (value & NAND_MODE_ECC_MASK) {
|
|
case NAND_MODE_ECC_RST:
|
|
ecc_reset(&s->ecc);
|
|
break;
|
|
case NAND_MODE_ECC_READ:
|
|
// FIXME
|
|
break;
|
|
case NAND_MODE_ECC_EN:
|
|
ecc_reset(&s->ecc);
|
|
}
|
|
return;
|
|
case NAND_ISR:
|
|
s->nand.isr = value;
|
|
tc6393xb_nand_irq(s);
|
|
return;
|
|
case NAND_IMR:
|
|
s->nand.imr = value;
|
|
tc6393xb_nand_irq(s);
|
|
return;
|
|
}
|
|
fprintf(stderr, "tc6393xb_nand: unhandled write at %08x: %02x\n",
|
|
(uint32_t) addr, value & 0xff);
|
|
}
|
|
|
|
#define BITS 8
|
|
#include "hw/tc6393xb_template.h"
|
|
#define BITS 15
|
|
#include "hw/tc6393xb_template.h"
|
|
#define BITS 16
|
|
#include "hw/tc6393xb_template.h"
|
|
#define BITS 24
|
|
#include "hw/tc6393xb_template.h"
|
|
#define BITS 32
|
|
#include "hw/tc6393xb_template.h"
|
|
|
|
static void tc6393xb_draw_graphic(TC6393xbState *s, int full_update)
|
|
{
|
|
DisplaySurface *surface = qemu_console_surface(s->con);
|
|
|
|
switch (surface_bits_per_pixel(surface)) {
|
|
case 8:
|
|
tc6393xb_draw_graphic8(s);
|
|
break;
|
|
case 15:
|
|
tc6393xb_draw_graphic15(s);
|
|
break;
|
|
case 16:
|
|
tc6393xb_draw_graphic16(s);
|
|
break;
|
|
case 24:
|
|
tc6393xb_draw_graphic24(s);
|
|
break;
|
|
case 32:
|
|
tc6393xb_draw_graphic32(s);
|
|
break;
|
|
default:
|
|
printf("tc6393xb: unknown depth %d\n",
|
|
surface_bits_per_pixel(surface));
|
|
return;
|
|
}
|
|
|
|
dpy_gfx_update(s->con, 0, 0, s->scr_width, s->scr_height);
|
|
}
|
|
|
|
static void tc6393xb_draw_blank(TC6393xbState *s, int full_update)
|
|
{
|
|
DisplaySurface *surface = qemu_console_surface(s->con);
|
|
int i, w;
|
|
uint8_t *d;
|
|
|
|
if (!full_update)
|
|
return;
|
|
|
|
w = s->scr_width * surface_bytes_per_pixel(surface);
|
|
d = surface_data(surface);
|
|
for(i = 0; i < s->scr_height; i++) {
|
|
memset(d, 0, w);
|
|
d += surface_stride(surface);
|
|
}
|
|
|
|
dpy_gfx_update(s->con, 0, 0, s->scr_width, s->scr_height);
|
|
}
|
|
|
|
static void tc6393xb_update_display(void *opaque)
|
|
{
|
|
TC6393xbState *s = opaque;
|
|
DisplaySurface *surface = qemu_console_surface(s->con);
|
|
int full_update;
|
|
|
|
if (s->scr_width == 0 || s->scr_height == 0)
|
|
return;
|
|
|
|
full_update = 0;
|
|
if (s->blanked != s->blank) {
|
|
s->blanked = s->blank;
|
|
full_update = 1;
|
|
}
|
|
if (s->scr_width != surface_width(surface) ||
|
|
s->scr_height != surface_height(surface)) {
|
|
qemu_console_resize(s->con, s->scr_width, s->scr_height);
|
|
full_update = 1;
|
|
}
|
|
if (s->blanked)
|
|
tc6393xb_draw_blank(s, full_update);
|
|
else
|
|
tc6393xb_draw_graphic(s, full_update);
|
|
}
|
|
|
|
|
|
static uint64_t tc6393xb_readb(void *opaque, hwaddr addr,
|
|
unsigned size)
|
|
{
|
|
TC6393xbState *s = opaque;
|
|
|
|
switch (addr >> 8) {
|
|
case 0:
|
|
return tc6393xb_scr_readb(s, addr & 0xff);
|
|
case 1:
|
|
return tc6393xb_nand_cfg_readb(s, addr & 0xff);
|
|
};
|
|
|
|
if ((addr &~0xff) == s->nand_phys && s->nand_enable) {
|
|
// return tc6393xb_nand_readb(s, addr & 0xff);
|
|
uint8_t d = tc6393xb_nand_readb(s, addr & 0xff);
|
|
// fprintf(stderr, "tc6393xb_nand: read at %08x: %02hhx\n", (uint32_t) addr, d);
|
|
return d;
|
|
}
|
|
|
|
// fprintf(stderr, "tc6393xb: unhandled read at %08x\n", (uint32_t) addr);
|
|
return 0;
|
|
}
|
|
|
|
static void tc6393xb_writeb(void *opaque, hwaddr addr,
|
|
uint64_t value, unsigned size) {
|
|
TC6393xbState *s = opaque;
|
|
|
|
switch (addr >> 8) {
|
|
case 0:
|
|
tc6393xb_scr_writeb(s, addr & 0xff, value);
|
|
return;
|
|
case 1:
|
|
tc6393xb_nand_cfg_writeb(s, addr & 0xff, value);
|
|
return;
|
|
};
|
|
|
|
if ((addr &~0xff) == s->nand_phys && s->nand_enable)
|
|
tc6393xb_nand_writeb(s, addr & 0xff, value);
|
|
else
|
|
fprintf(stderr, "tc6393xb: unhandled write at %08x: %02x\n",
|
|
(uint32_t) addr, (int)value & 0xff);
|
|
}
|
|
|
|
TC6393xbState *tc6393xb_init(MemoryRegion *sysmem, uint32_t base, qemu_irq irq)
|
|
{
|
|
TC6393xbState *s;
|
|
DriveInfo *nand;
|
|
static const MemoryRegionOps tc6393xb_ops = {
|
|
.read = tc6393xb_readb,
|
|
.write = tc6393xb_writeb,
|
|
.endianness = DEVICE_NATIVE_ENDIAN,
|
|
.impl = {
|
|
.min_access_size = 1,
|
|
.max_access_size = 1,
|
|
},
|
|
};
|
|
|
|
s = (TC6393xbState *) g_malloc0(sizeof(TC6393xbState));
|
|
s->irq = irq;
|
|
s->gpio_in = qemu_allocate_irqs(tc6393xb_gpio_set, s, TC6393XB_GPIOS);
|
|
|
|
s->l3v = *qemu_allocate_irqs(tc6393xb_l3v, s, 1);
|
|
s->blanked = 1;
|
|
|
|
s->sub_irqs = qemu_allocate_irqs(tc6393xb_sub_irq, s, TC6393XB_NR_IRQS);
|
|
|
|
nand = drive_get(IF_MTD, 0, 0);
|
|
s->flash = nand_init(nand ? nand->bdrv : NULL, NAND_MFR_TOSHIBA, 0x76);
|
|
|
|
memory_region_init_io(&s->iomem, &tc6393xb_ops, s, "tc6393xb", 0x10000);
|
|
memory_region_add_subregion(sysmem, base, &s->iomem);
|
|
|
|
memory_region_init_ram(&s->vram, "tc6393xb.vram", 0x100000);
|
|
vmstate_register_ram_global(&s->vram);
|
|
s->vram_ptr = memory_region_get_ram_ptr(&s->vram);
|
|
memory_region_add_subregion(sysmem, base + 0x100000, &s->vram);
|
|
s->scr_width = 480;
|
|
s->scr_height = 640;
|
|
s->con = graphic_console_init(tc6393xb_update_display,
|
|
NULL, /* invalidate */
|
|
NULL, /* screen_dump */
|
|
NULL, /* text_update */
|
|
s);
|
|
|
|
return s;
|
|
}
|