qemu/hw/ppc/spapr_pci_vfio.c

281 lines
8.7 KiB
C

/*
* QEMU sPAPR PCI host for VFIO
*
* Copyright (c) 2011-2014 Alexey Kardashevskiy, IBM Corporation.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License,
* or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#include "hw/ppc/spapr.h"
#include "hw/pci-host/spapr.h"
#include "hw/pci/msix.h"
#include "linux/vfio.h"
#include "hw/vfio/vfio.h"
static Property spapr_phb_vfio_properties[] = {
DEFINE_PROP_INT32("iommu", sPAPRPHBVFIOState, iommugroupid, -1),
DEFINE_PROP_END_OF_LIST(),
};
static void spapr_phb_vfio_finish_realize(sPAPRPHBState *sphb, Error **errp)
{
sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
struct vfio_iommu_spapr_tce_info info = { .argsz = sizeof(info) };
int ret;
sPAPRTCETable *tcet;
uint32_t liobn = svphb->phb.dma_liobn;
if (svphb->iommugroupid == -1) {
error_setg(errp, "Wrong IOMMU group ID %d", svphb->iommugroupid);
return;
}
ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
VFIO_CHECK_EXTENSION,
(void *) VFIO_SPAPR_TCE_IOMMU);
if (ret != 1) {
error_setg_errno(errp, -ret,
"spapr-vfio: SPAPR extension is not supported");
return;
}
ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
VFIO_IOMMU_SPAPR_TCE_GET_INFO, &info);
if (ret) {
error_setg_errno(errp, -ret,
"spapr-vfio: get info from container failed");
return;
}
tcet = spapr_tce_new_table(DEVICE(sphb), liobn, info.dma32_window_start,
SPAPR_TCE_PAGE_SHIFT,
info.dma32_window_size >> SPAPR_TCE_PAGE_SHIFT,
true);
if (!tcet) {
error_setg(errp, "spapr-vfio: failed to create VFIO TCE table");
return;
}
/* Register default 32bit DMA window */
memory_region_add_subregion(&sphb->iommu_root, tcet->bus_offset,
spapr_tce_get_iommu(tcet));
}
static void spapr_phb_vfio_eeh_reenable(sPAPRPHBVFIOState *svphb)
{
struct vfio_eeh_pe_op op = {
.argsz = sizeof(op),
.op = VFIO_EEH_PE_ENABLE
};
vfio_container_ioctl(&svphb->phb.iommu_as,
svphb->iommugroupid, VFIO_EEH_PE_OP, &op);
}
static void spapr_phb_vfio_reset(DeviceState *qdev)
{
/*
* The PE might be in frozen state. To reenable the EEH
* functionality on it will clean the frozen state, which
* ensures that the contained PCI devices will work properly
* after reboot.
*/
spapr_phb_vfio_eeh_reenable(SPAPR_PCI_VFIO_HOST_BRIDGE(qdev));
}
static int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
unsigned int addr, int option)
{
sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
struct vfio_eeh_pe_op op = { .argsz = sizeof(op) };
int ret;
switch (option) {
case RTAS_EEH_DISABLE:
op.op = VFIO_EEH_PE_DISABLE;
break;
case RTAS_EEH_ENABLE: {
PCIHostState *phb;
PCIDevice *pdev;
/*
* The EEH functionality is enabled on basis of PCI device,
* instead of PE. We need check the validity of the PCI
* device address.
*/
phb = PCI_HOST_BRIDGE(sphb);
pdev = pci_find_device(phb->bus,
(addr >> 16) & 0xFF, (addr >> 8) & 0xFF);
if (!pdev) {
return RTAS_OUT_PARAM_ERROR;
}
op.op = VFIO_EEH_PE_ENABLE;
break;
}
case RTAS_EEH_THAW_IO:
op.op = VFIO_EEH_PE_UNFREEZE_IO;
break;
case RTAS_EEH_THAW_DMA:
op.op = VFIO_EEH_PE_UNFREEZE_DMA;
break;
default:
return RTAS_OUT_PARAM_ERROR;
}
ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
VFIO_EEH_PE_OP, &op);
if (ret < 0) {
return RTAS_OUT_HW_ERROR;
}
return RTAS_OUT_SUCCESS;
}
static int spapr_phb_vfio_eeh_get_state(sPAPRPHBState *sphb, int *state)
{
sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
struct vfio_eeh_pe_op op = { .argsz = sizeof(op) };
int ret;
op.op = VFIO_EEH_PE_GET_STATE;
ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
VFIO_EEH_PE_OP, &op);
if (ret < 0) {
return RTAS_OUT_PARAM_ERROR;
}
*state = ret;
return RTAS_OUT_SUCCESS;
}
static void spapr_phb_vfio_eeh_clear_dev_msix(PCIBus *bus,
PCIDevice *pdev,
void *opaque)
{
/* Check if the device is VFIO PCI device */
if (!object_dynamic_cast(OBJECT(pdev), "vfio-pci")) {
return;
}
/*
* The MSIx table will be cleaned out by reset. We need
* disable it so that it can be reenabled properly. Also,
* the cached MSIx table should be cleared as it's not
* reflecting the contents in hardware.
*/
if (msix_enabled(pdev)) {
uint16_t flags;
flags = pci_host_config_read_common(pdev,
pdev->msix_cap + PCI_MSIX_FLAGS,
pci_config_size(pdev), 2);
flags &= ~PCI_MSIX_FLAGS_ENABLE;
pci_host_config_write_common(pdev,
pdev->msix_cap + PCI_MSIX_FLAGS,
pci_config_size(pdev), flags, 2);
}
msix_reset(pdev);
}
static void spapr_phb_vfio_eeh_clear_bus_msix(PCIBus *bus, void *opaque)
{
pci_for_each_device(bus, pci_bus_num(bus),
spapr_phb_vfio_eeh_clear_dev_msix, NULL);
}
static void spapr_phb_vfio_eeh_pre_reset(sPAPRPHBState *sphb)
{
PCIHostState *phb = PCI_HOST_BRIDGE(sphb);
pci_for_each_bus(phb->bus, spapr_phb_vfio_eeh_clear_bus_msix, NULL);
}
static int spapr_phb_vfio_eeh_reset(sPAPRPHBState *sphb, int option)
{
sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
struct vfio_eeh_pe_op op = { .argsz = sizeof(op) };
int ret;
switch (option) {
case RTAS_SLOT_RESET_DEACTIVATE:
op.op = VFIO_EEH_PE_RESET_DEACTIVATE;
break;
case RTAS_SLOT_RESET_HOT:
spapr_phb_vfio_eeh_pre_reset(sphb);
op.op = VFIO_EEH_PE_RESET_HOT;
break;
case RTAS_SLOT_RESET_FUNDAMENTAL:
spapr_phb_vfio_eeh_pre_reset(sphb);
op.op = VFIO_EEH_PE_RESET_FUNDAMENTAL;
break;
default:
return RTAS_OUT_PARAM_ERROR;
}
ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
VFIO_EEH_PE_OP, &op);
if (ret < 0) {
return RTAS_OUT_HW_ERROR;
}
return RTAS_OUT_SUCCESS;
}
static int spapr_phb_vfio_eeh_configure(sPAPRPHBState *sphb)
{
sPAPRPHBVFIOState *svphb = SPAPR_PCI_VFIO_HOST_BRIDGE(sphb);
struct vfio_eeh_pe_op op = { .argsz = sizeof(op) };
int ret;
op.op = VFIO_EEH_PE_CONFIGURE;
ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
VFIO_EEH_PE_OP, &op);
if (ret < 0) {
return RTAS_OUT_PARAM_ERROR;
}
return RTAS_OUT_SUCCESS;
}
static void spapr_phb_vfio_class_init(ObjectClass *klass, void *data)
{
DeviceClass *dc = DEVICE_CLASS(klass);
sPAPRPHBClass *spc = SPAPR_PCI_HOST_BRIDGE_CLASS(klass);
dc->props = spapr_phb_vfio_properties;
dc->reset = spapr_phb_vfio_reset;
spc->finish_realize = spapr_phb_vfio_finish_realize;
spc->eeh_set_option = spapr_phb_vfio_eeh_set_option;
spc->eeh_get_state = spapr_phb_vfio_eeh_get_state;
spc->eeh_reset = spapr_phb_vfio_eeh_reset;
spc->eeh_configure = spapr_phb_vfio_eeh_configure;
}
static const TypeInfo spapr_phb_vfio_info = {
.name = TYPE_SPAPR_PCI_VFIO_HOST_BRIDGE,
.parent = TYPE_SPAPR_PCI_HOST_BRIDGE,
.instance_size = sizeof(sPAPRPHBVFIOState),
.class_init = spapr_phb_vfio_class_init,
.class_size = sizeof(sPAPRPHBClass),
};
static void spapr_pci_vfio_register_types(void)
{
type_register_static(&spapr_phb_vfio_info);
}
type_init(spapr_pci_vfio_register_types)