qemu/docs/specs/acpi_pci_hotplug.txt

46 lines
1.7 KiB
Plaintext

QEMU<->ACPI BIOS PCI hotplug interface
--------------------------------------
QEMU supports PCI hotplug via ACPI, for PCI bus 0. This document
describes the interface between QEMU and the ACPI BIOS.
ACPI GPE block (IO ports 0xafe0-0xafe3, byte access):
-----------------------------------------
Generic ACPI GPE block. Bit 1 (GPE.1) used to notify PCI hotplug/eject
event to ACPI BIOS, via SCI interrupt.
PCI slot injection notification pending (IO port 0xae00-0xae03, 4-byte access):
---------------------------------------------------------------
Slot injection notification pending. One bit per slot.
Read by ACPI BIOS GPE.1 handler to notify OS of injection
events. Read-only.
PCI slot removal notification (IO port 0xae04-0xae07, 4-byte access):
-----------------------------------------------------
Slot removal notification pending. One bit per slot.
Read by ACPI BIOS GPE.1 handler to notify OS of removal
events. Read-only.
PCI device eject (IO port 0xae08-0xae0b, 4-byte access):
----------------------------------------
Write: Used by ACPI BIOS _EJ0 method to request device removal.
One bit per slot.
Read: Hotplug features register. Used by platform to identify features
available. Current base feature set (no bits set):
- Read-only "up" register @0xae00, 4-byte access, bit per slot
- Read-only "down" register @0xae04, 4-byte access, bit per slot
- Read/write "eject" register @0xae08, 4-byte access,
write: bit per slot eject, read: hotplug feature set
- Read-only hotplug capable register @0xae0c, 4-byte access, bit per slot
PCI removability status (IO port 0xae0c-0xae0f, 4-byte access):
-----------------------------------------------
Used by ACPI BIOS _RMV method to indicate removability status to OS. One
bit per slot. Read-only